跳转至

Diagnostic Extract Template

参考文献

[1] Specification of RTE Software(RTE 软件规范)

AUTOSAR_CP_SWS_RTE

[2] Layered Software Architecture(分层软件架构)

AUTOSAR_CP_EXP_LayeredSoftwareArchitecture

[3] Specification of ECU Configuration(ECU 配置规范)

AUTOSAR_CP_TPS_ECUConfiguration

[4] ASAM MCD 2D ODX

http://www.asam.net

[5] AUTOSAR XML Schema Production Rules(AUTOSAR XML 模式生成规则)

AUTOSAR_FO_TPS_XMLSchemaProductionRules

[6] System Template(系统模板)

AUTOSAR_CP_TPS_SystemTemplate

[7] Specification of ECU Configuration Parameters (XML)(ECU 配置参数规范(XML))

AUTOSAR_CP_MOD_ECUConfigurationParameters

[8] Specification of Manifest(清单规范)

AUTOSAR_AP_TPS_ManifestSpecification

[9] Software Component Template(软件组件模板)

AUTOSAR_CP_TPS_SoftwareComponentTemplate

[10] Basic Software Module Description Template(基础软件模块描述模板)

AUTOSAR_CP_TPS_BSWModuleDescriptionTemplate

[11] Specification of Diagnostic Communication Manager(诊断通信管理器规范)

AUTOSAR_CP_SWS_DiagnosticCommunicationManager

[12] Specification of Diagnostic Event Manager(诊断事件管理器规范)

AUTOSAR_CP_SWS_DiagnosticEventManager

[13] Standardization Template(标准化模板)

AUTOSAR_FO_TPS_StandardizationTemplate

[14] Specification of Function Inhibition Manager(功能禁用管理器规范)

AUTOSAR_CP_SWS_FunctionInhibitionManager

[15] SAE J1939 - Serial Control and Communications Heavy Duty Vehicle Network

SAE J1939

[16] Generic Structure Template(通用结构模板)

AUTOSAR_FO_TPS_GenericStructureTemplate

[17] Unified diagnostic services (UDS) - Part 1: Specification and requirements

https://www.iso.org

[18] Road vehicles - End-of-life activation of on-board pyrotechnic devices - Part 2: Communication requirements

https://www.iso.org

[19] Road vehicles - Communication between vehicle and external equipment for emission-related diagnostic - Part 5

https://www.iso.org

[20] Road vehicles - Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements - Part 3

https://www.iso.org

[21] SAE J1939-73 Application Layer - Diagnostics

SAE J1939

[22] Security Extract Template(安全提取模板)

AUTOSAR_FO_TPS_SecurityExtractTemplate

[23] Specification of Intrusion Detection System Manager(入侵检测系统管理器规范)

AUTOSAR_CP_SWS_IntrusionDetectionSystemManager

[24] SAE J1979

SAE J1979

[25] Requirements on Diagnostic Extract Template(诊断提取模板需求)

AUTOSAR_CP_RS_DiagnosticExtractTemplate

[26] Software Process Engineering Meta-Model Specification

http://www.omg.org/spec/SPEM/2.0/

1. 简介

1.1. 概述

AUTOSAR ECU 开发的分布式特性要求以优化的方式采集信息。特别是,诊断信息(即 DEM 和 DCM 配置)应由掌握最完整知识的人只采集一次,因此比某个集中式的个人更能承担责任。

在 DiagnosticExtract 出现之前的配置方法中,基础软件模块 DCM 和 DEM 完全集中配置。在集成期间,RTE 之上的所有 SW-C [1](应用软件)引入要连接到 BSW 模块 [2] 的端口。此外,SW-C 表达应由 BSW 满足的需求。

市场对将 OEM 特定配置流程的诊断需求转移给其一级供应商有很高的需求。

过去,由于缺乏完整的方案,经常使用 ODX 或 EcuC [3] 等多种文件格式。但 ODX 和 EcuC 都不适合传输这些信息。

请注意:

反馈路径(例如从 OEM 到应用开发者)未在此描绘,因为它们通常按公司或项目特定方式实现。

例如,ODX [4] 缺少故障存储器细节,而 EcuC(它从来不是为成为不同组织之间数据交换的载体而设计的)具有非常通用的性质,使得严格模型形式化的执行非常困难。

除此之外,将 EcuC 定义集成到现有配置中(尤其是 PDU)无法完全自动化。

因此,显而易见的解决方法是定义一个新的关于诊断功能的标准化 AUTOSAR 交换格式,其用法类似于系统描述,形式化为 ARXML [5] 文件。

本着这种精神,诊断功能的配置变得类似于系统描述 [6] 中通信部分的配置。

图 1.1 展示了两个概括性用例的诊断配置过程。该过程涉及三方:

  • OEM 或诊断请求者

  • 应用开发者

  • ECU 供应商或集成者

这些参与者对诊断提取的具体作用将在以下子章中详细说明。

1.1.1. OEM

OEM 或诊断数据请求者使用 DiagnosticExtract 定义一个或多个 ECU 的诊断接口。它还可以定义一些 InternalBehavior 作为对 ECU 供应商或应用开发者的要求。

  • 定义 DTC 的值

  • 定义 ECU 支持的 UDS 服务和子服务

  • 定义应用开发者实现的特定组合所需的事件

注意: 该列表只是一个示例;本文档不定义每个元素的具体归属。

在第一个用例中,DiagnosticExtract 用于交换将被转换为 EcuC 配置的信息(M2 到 M1 的映射,另见 [3] 和 [7])。

其次,OEM 使用 DiagnosticExtract 记录要由供应商实现的需求。这些需求以文本语言表达,无法直接映射到任何 EcuC 配置参数(无法进行 M2 到 M1 的映射)。

1.1.2. 应用开发者

应用开发者使用相应的软件组件描述实现其软件组件。“应用开发者”角色可以

由 OEM 或供应商承担。换言之,OEM 和供应商都可以为给定的 ECU 贡献应用软件。

随着该概念的引入,应用开发者可以将与软件组件相关的诊断信息作为 DiagnosticExtract 的一部分提供。

应用开发者还可能在 DiagnosticExtract 中以文本形式从 OEM 接收一些作为要求的输入,例如:

由本软件组件实现的特定 ReadDataByIdentifier 的内容定义

本软件组件所需事件的定义

注意: 仅作为示例内容提及。本文档不定义每个元素的具体归属。

在第一个用例中,应用开发者定义特定 ReadDataByIdentifier 的参数,即诊断请求的内容但不是 DID 本身。该命令的 DID 通常由 OEM 定义。

其次,包括防抖(Debouncing)和运行循环(OperationCycle)等信息的软件组件事件可以由应用开发者定义。应用开发者还可以定义某个 OEM 不需要而另一个 OEM 需要的事件和诊断作业。

供应商可能为多个 OEM 使用相同的软件并需要复用它。这意味着来自软件组件的一些 DiagnosticExtract 信息在集成期间如果对特定项目不需要,可以被忽略。

1.1.3. ECU 供应商

ECU 供应商或集成者从 OEM 和多个应用开发者处接收一个或多个 DiagnosticExtract 文件。集成者的主要目标是集成所有交付的 DiagnosticExtract 并从中生成 EcuC 配置。

由于该概念不为 DID、UDS 服务的参数、事件、会话等每个元素定义具体归属,集成者必须确保合并后完整信息仍然有效。

  • DTC 到事件的映射

  • 事件的合并

  • 服务的映射

一些 DTC 可能已经映射到事件——特别是在两者来自同一方的情况下。但如果 DTC 由 OEM 定义,而软件由作为应用开发者的其他供应商实现,则集成者必须确保两者被映射在一起。

在某些情况下,一个事件可能被多次定义。OEM 定义应由应用开发者实现的事件。一个供应商实现一个将在多个项目中使用的软件组件,该组件也检测这种类型的错误并定义了相同的事件。

两个事件可能命名不同但含义相同。集成者必须在集成期间检测到这种冗余并将它们合并在一起。

在另一种情况下,OEM 要求一个特定的 ReadDataByIdentifier,而应用开发者实现它。如果实现只针对一个特定项目进行,应用开发者可以将 OEM 的 DID 映射到其软件组件中已定义的作业。

在应用开发者实现通用诊断作业的其他情况下,合并该信息并将作业映射到相应 DID 将是 ECU 供应商的任务。

1.1.4. 文件的交换

在 ECU 开发项目期间,三个主要角色(OEM、应用开发者、ECU 集成者)交换 DiagnosticExtract 文件。交换的时机和频率以及每个交换文件中的内容在很大程度上取决于具体的项目设置和情形。

因此,DiagnosticExtract 格式被设计为允许不同角色在相当任意的时间点贡献定义并逐步充实,以满足“分散式配置”的需求。

对于任意两个角色之间的任何交换路径,都使用基于 DiagnosticExtract 模板的相同文件格式。然后由公司特定的流程和工具来合并收集的 DiagnosticExtract 文件并解决冲突(矛盾、冗余等)。

最终结果是一个一致且完整的 DiagnosticExtract 文件,它作为派生基础软件诊断模块配置的输入。

即使在 DiagnosticExtract 已被完全集成、可以开始派生 EcuC 层级诊断协议栈的配置之后,仍然预期将它反馈给例如 OEM。

在这种情况下,OEM 能够在诊断提取的层级上审查诊断协议栈的配置。

在某些时点,该信息也可以被用来(直接或通过其他格式的间接方式)创建诊断客户端的配置。

1.1.5. 与软件组件服务需求的关系

在诊断提取引入之前,服务需求(Service Needs)被用来描述软件组件层级的诊断需求。这些配置需求被引用到相关的基础软件模块 DCM 或 DEM,以在 BSW 层级提供相应的配置。

服务需求的使用只能在原子软件组件层级进行,而诊断需求的指派必须能够在组合(Composition)层级进行。

软件组件描述中的软件组件服务需求仍要与 DiagnosticExtract 一起使用,以标注按照 DiagnosticExtract 的定义与后续映射和处理相关的软件组件端口。

从软件开发者的角度来看,DiagnosticExtract 部分地替代软件组件服务需求,部分地扩展它们。“替代”的理由是避免冗余的诊断定义。

由于软件组件开发者可能定义的一些诊断属性未包含在软件组件服务需求中,DiagnosticExtract 也可以被视为对软件组件服务需求原始用途的“扩展”。

1.1.6. 建议和提示

多方对各自应提供哪些部分可能有不同的理解。没有定义规则来指示谁对每个部分负责。最终,由 ECU 供应商以其集成者身份确保所有映射都已完成,并且 ECU 按 OEM 的预期运行。

如果 OEM 没有自己的诊断需求,ECU 供应商必须提供完整的 DiagnosticExtract。在这种情况下,OEM 可能只在交付时收到 DiagnosticExtract。各方如何使用该格式的过程本身不在本规范中定义。

图 1.1 展示了各方之间处理 DiagnosticExtract 的推荐方式。在用例 1 中,一些软件组件由 OEM(或 OEM 的供应商)实现,DiagnosticExtract 数据的首次合并在 OEM 处进行。

在用例 2 中,OEM 通过 DiagnosticExtract 提供诊断需求,多个应用开发者提供与其实现相关的信息,合并完全由 ECU 供应商执行。

此外,允许用例 1 和用例 2 的组合。此外,ECU 供应商可以实现软件的某些部分,包括其对应的 DiagnosticExtract。

1.1.7. 限制

本发布版的 DiagnosticExtract 模板聚焦于只为单个 ECU 定义诊断需求。目前,无法使用 DiagnosticExtract 模板为由多个 ECU 组成的系统或部分系统定义分布式诊断功能。

在未来的发布版中,DiagnosticExtract 模板预计将被扩展以涵盖分布式诊断功能的配置。类似于系统描述中对通信依赖的描述,应当能够在系统层级描述诊断需求,并从该描述派生特定 ECU 的诊断需求。

一般而言,DiagnosticExtract 不支持用与流程相关的部分来记录诊断配置数据的成熟度。这意味着数据对象不能被标记为“草稿”或“已发布”。

该问题需要由 AUTOSAR 在未来发布版中用一个通用概念解决。因此,仅为诊断引入一个解决方案没有意义。

1.2. 在经典平台和自适应平台上建模诊断配置

AUTOSAR 诊断栈“外部行为”的配置通过所谓的 DiagnosticExtract 完成。DiagnosticExtract 总体上同时扩展到 AUTOSAR 经典平台和 AUTOSAR 自适应平台。

具体而言,DiagnosticExtract 的某些部分只适用于 AUTOSAR 经典平台,某些部分在 AUTOSAR 经典平台和 AUTOSAR 自适应平台之间共享,某些部分只适用于 AUTOSAR 自适应平台。

特定于 AUTOSAR 经典平台的部分以及同时适用于 AUTOSAR 经典平台和自适应平台的部分记录在交付物 “TPS Diagnostic Extract Template” 中,即本文档。

由于技术原因,适用于 AUTOSAR 自适应平台的部分无法包含在本文档(“TPS Diagnostic Extract Template”)中,因此它们在文档 “TPS Manifest Specification” [8] 中描述。

如 “TPS Manifest Specification” 所描述的关于诊断管理配置的部分,无缝地契合 AUTOSAR 经典平台所使用的同一建模框架。这意味着 AUTOSAR 自适应平台的特定部分利用了 “TPS Diagnostic Extract Template” 中描述的共享部分。

换言之,想聚焦于在 AUTOSAR 经典平台上应用的 DiagnosticExtract 的读者可以专注于阅读 “TPS Diagnostic Extract Template”。

另一方面,想了解 DiagnosticExtract 在 AUTOSAR 自适应平台上如何工作的读者,必须阅读 “TPS Manifest Specification” 中与诊断相关的章节,以及 “TPS Diagnostic Extract Template” 的相关部分。

1.3. 范围

本文档描述对诊断配置的贡献的形式化描述。

在元建模层级上,本文档描述的内容在概念上关系到软件组件模板 [9] 或基础软件模块描述模板 [10] 所定义的 SwcServiceDependency 或 BswServiceDependency 的定义。

与系统模板 [6] 所描述的 AUTOSAR 系统中通信的规范也存在进一步的关系。

与诊断通信管理器 [11] 以及诊断事件管理器 [12] 的规范也存在进一步的关系。

DiagnosticExtract 与 AUTOSAR 元模型其余部分的关系在图 1.3 中勾勒。

1.4. 约束的施加时间

本文档中的约束具有不同的实际施加时间,取决于使用 DiagnosticExtract 的平台。在 AUTOSAR 经典平台上,施加时间定义为创建诊断栈的 ECU 配置之时。

对于 AUTOSAR 自适应平台,施加时间被确定为清单内容创建完成之时。

在每个约束中分别为不同平台列出这两个施加时间会非常繁琐。因此,只要一个约束同时适用于自适应平台和经典平台,就使用通用短语 “在 DEXT 完成时”。

1.5. 文档约定

技术术语以等宽字体排版,例如 PortPrototype。一般规则是,技术术语的复数形式通过在单数形式后加 “s” 构成,例如 PortPrototype。借此,本文档类似于 AUTOSAR XML 模式中使用的术语。

本文档以文本形式包含约束,它们通过唯一的数字约束 ID、一个标题以及从左上标字符开始、以右下标字符结束的实际约束文本与正文其余部分区分开来。

这些约束的目的是字面上约束对 AUTOSAR 元模型的解释,从而能够检测元模型实例(即在 M1 层级)中实现的标准化行为的违规。

鼓励 AUTOSAR 工具的制造者将与 M1 建模问题对应的约束数字 ID 作为工具发出的诊断消息的一部分加入。

本文档中引入的类的属性以类表的形式列出。它们具有顶层元素 AUTOSAR 示例所示的形式:

请注意,约束并不要求在 AUTOSAR 工作流的任意给定时间都可执行。在模型开发期间,约束可以被合理地违反,因为不完整的模型显然会显示不一致。

然而,在工作流的特定时点,应执行约束以防止错误配置。

工作流中应执行约束的时点(有时也称为约束的 “绑定时间”)对每个模型类别都不同,例如在经典平台上,为软件组件定义的约束通常在 RTE 生成之前执行,而针对 ECU 提取定义的约束应在为 Com 协议栈创建 ECU 配置时应用。

对于每个文档,都定义了约束可能的绑定时间,并且绑定时间通常在约束自身中提及,以便为 AUTOSAR 创作工具的实现者提供正确的指引。

以 AUTOSAR 作为典型类表的示例。表中前几行的含义如下:

Class:UML 模型中定义的类的名称。

Package:定义该类的 UML 包。列出它只是为了帮助在整体元模型中定位该类。

Note:建模者为该类给出的注释(类注记)。类的构造型和 UML 标签也在此注明。

Base Classes:如适用,直接基类的列表。

表中的表头含义如下:

Attribute:类的一个属性的名称。注意,AUTOSAR 不区分类属性和拥有的关联端。

Type:类的一个属性的类型。

Mul.:属性被指派的多重性,即给定数据类型的多少个实例与该属性关联。

Kind:规定该属性是在类中聚合的(aggr 聚合)、类中的一个 UML 属性(attr 原始属性),还是仅被类引用(ref 引用)。此字段还指示实例引用(iref 实例引用)。

Note:建模者为类属性给出的注释(角色注记)。类的构造型和 UML 标签也在此注明。

请注意,以字母而非数字开头的章节表示文档的附录。附录的目的是支持对文档某些方面的说明,不代表标准的有约束力的约定。

应使用 [TPS_STDT_00053] 中规定的表达义务的助动词形式来指示需求,见《标准化模板》的 “Support for Traceability” 章([13])。

AUTOSAR 文档中需求的表示遵循 [TPS_STDT_00078] 中规定的表,见《标准化模板》的 “Support for Traceability” 章([13])。

1.6. 关于表

本文档中有若干表描述模型元素的适用性或多重性。这些表包含空单元格,空单元格表示 “不适用” 的含义。对应空单元格的模型元素在相应表单元格所描述的上下文中不应存在。

如果表单元格的值要指示所表示模型元素的存在性或多重性无论如何都应被忽略,则该表单元格取内容 “d/c”(“无关紧要”)。这意味着如果相应模型元素存在,它应在模型的下游处理中被忽略。

2. 用例

2.1. 诊断数据交换的用例

DiagnosticExtract 的基本用法是在诊断开发过程中所涉及的不同参与方之间交换诊断数据,以便配置 DCM 和 DEM,并提供相应应用接口的描述以实现诊断服务和故障处理。

2.2. DCM 的配置

如图 2.1 所描绘,DCM 的配置包括诊断服务的建立以及一个或多个软件组件(例如组合 1、组合 2)提供的数据对象的指派。

2.3. DEM 的配置

如图 2.2 所勾勒,DEM 的配置包括故障存储器数据(DTC 和环境数据)以及一个或多个 SwComponentType(例如组合 1、组合 2)对相应数据的指派。

如前所述,诊断开发过程分布在不同的参与方之间。一方面,OEM 需要描述必须由 ECU 实现的诊断系统的一般需求:

  1. 根据诊断系统,OEM 可以提供完全或部分填写的 DiagnosticExtract,包括 PortInterface 的描述:

  2. 集成者/SWC 开发者(OEM 或一级供应商)负责完成工作(细化预定义的诊断内容)。

  3. 集成者/SWC 开发者(OEM 或一级供应商)负责其自己定义的诊断内容的具体配置。

  4. 集成者对更新后的诊断描述进行新的集成。

  5. 将完全或部分填写的 DiagnosticExtract 返回给 OEM,用于:

  6. 文档

  7. ECU 测试

  8. 集成评审

  9. 故障纠正

用例示例:

  • UDS 服务 0x22(ReadDataByIdentifier)的配置

  • UDS 服务 0x2E(WriteDataByIdentifier)的配置

  • UDS 服务 0x31(RoutineControl)的配置

  • UDS 服务 0x2F(I/O 控制)的配置

  • DEM DTC 的配置

  • 组合事件的配置

  • 事件到 DTC 的映射

  • DTC 相关环境数据的配置

  • DEM 事件到其相应使能条件和存储条件的映射

  • 配置通用 DCM 参数

  • 对代码生成不相关但必须在 OEM 和一级供应商之间交换的诊断需求的描述(例如 DTC 的置位和复位条件)

用例的细化,如图 2.3 中也描绘的那样:

OEM 已经为一个 ECU 提供系统模板,它将 ECU 供应商的软件部分描述为一个 CompositionSwComponentType,其中只有输入和输出是已知的。

  1. OEM 创建一个 DiagnosticExtract,它描述一个 ECU 的诊断接口。描述所支持的服务(例如 RDBI/WDBI/例程控制)以及它们相应的输入/输出参数和返回值(UDS 标准中可选的那些)。

  2. OEM 处的 SWC 开发者或 OEM 软件供应商开发 SWC,并使用 ServiceNeeds 作为诊断贡献来描述诊断信息。

  3. 项目中负责诊断的 OEM 人员创建 DiagnosticExtract 与 OEM 侧可用 SWC(来自第 2 步)之间的映射。

  4. 项目中负责诊断的 OEM 人员创建 DiagnosticExtract 与将由 ECU 供应商或软件开发者实现的 CompositionSwComponentType 之间的映射。

  5. ECU 供应商从 OEM 接收包括 DiagnosticExtract 的 ECU 提取并将其导入项目。

  6. 与第 2 步相同,供应商或二级供应商侧的 SWC 开发者使用 ServiceNeeds 作为诊断贡献来描述诊断信息。

与第 3 步相同:ECU 供应商的诊断负责人创建 DiagnosticExtract(来自第 5 步)的 PortInterface 与第 6 步提供的 SwComponentType 之间的映射。

对于指示器的使用,可能出现 DEM 中在 BSW 层级定义的指示器无法自动映射到 SWC 层级的实现的情况。这将需要集成者通过手动映射步骤来解决不匹配。

2.4. FiM 的配置

2.4.1. 建模功能禁用

FiM 的一个典型用例是定义 “软件组件及其中的功能的控制机制” [14]。借此,FiM 可以在运行时显著修改应用软件的行为,例如响应传感器故障。

决定禁用的条件派生自诊断事件。如果与硬件传感器相关的诊断事件被报告为 “失败”,则 FiM 可以降级应用软件的行为,使其不再依赖已变得不可靠的传感器信息。

因此,DiagnosticExtract 需要提供基本机制来创建此类禁用规则的定义,这些规则将应用软件的部分(它们在 DiagnosticExtract 中表现为形式化定义的 SwComponentType)与诊断事件的定义关联起来。

2.4.2. 在 Dem 存在之前建模 FiM 配置

FiM 模块和 Dem 模块的配置紧密交织,因为 FiM 使用在 Dem 上下文中定义的诊断事件。这意味着只有当 Dem 存在作为创建该配置的基础时,才能配置 FiM。

显然,这与诊断栈行为的 “分散式配置” 方法相矛盾。在具体的车辆项目中,通过 DiagnosticExtract 进行的 FiM 配置和 Dem 配置可能分布在不同的组织中。

然而,这些组织将无法彼此独立地推进,因为一方的工件是另一方组织开始工作的直接前提。

因此,DiagnosticExtract 的一个重要用例是能够在 DiagnosticExtract 的范围内配置 FiM 模块,而无需立即获得对 Dem 模块相应配置的访问。

换言之,典型的工作流可以如下:

  1. 在 FiM 配置内基于代表 Dem 模块上下文中定义的诊断事件的别名对象集合创建 FiM 配置,同时并行创建 Dem 配置,从而添加实际诊断事件的定义。

  2. 将 Dem 的配置交付给负责创建 FiM 配置的组织。

  3. 让该组织负责解析别名诊断事件,方式是从 FiM 配置引用实际 Dem 配置中包含的诊断事件。

2.5. J1939 诊断的配置

在系统提取内,J1939 诊断在服务层级通过诊断消息 DM01 .. DM57 配置,这些消息将由 J1939 Dcm 处理。

由诊断消息提供的诊断内容在 DiagnosticExtract 内为每个 J1939 功能单独定义,并贡献于 J1939 Dcm 的配置以及 Dem 配置中与 J1939 相关的部分。

J1939 功能(在 SAE J1939 标准 [15] 中称为控制器应用或 CA)由一个 NAME 和一个地址(在运行时指派)标识,并在 AUTOSAR 中由 J1939NmNode 表示。

2.5.1. 独立于部署方式的 J1939 诊断方面建模

在 DiagnosticExtract 中建模 J1939 的主要用例是:即使底层通信架构未(完全)定义且不存在车辆模型(由 System 表示),也能够创建与 J1939 功能相关的诊断配置。

J1939 诊断建模在功能开发期间、在功能将要部署的 System 存在之前完成。该方法代表诊断栈分散式配置的一种情形。

2.5.2. 在诊断提取中建模的 J1939 诊断内容

J1939 的诊断内容包括以下主题:

  • SPN 可疑参数编号在整个 J1939 规范中用于标识测量值(物理信号)和命令、这些值所映射到的通信信号,以及由这些引起的诊断事件。

  • 信号 与诊断相关的通信信号被专门标注,并由 J1939 诊断上报。

  • DTC J1939 DTC 由标识诊断事件来源的 SPN 和标识该来源问题(如越界异常)的 FMI(故障模式指示符)组成。此外,DTC 中还包含一个事件计数器。

  • 冻结帧 包含在诊断事件被报告为失败时捕获的测量值。J1939 支持两种不同类型的冻结帧:

  • 标准化冻结帧(由 DM04 报告),具有法规规定的布局

  • 扩展冻结帧(由 DM24/DM25 报告),具有可配置的布局

3. 概念背景

第 1 章已经概述了使用 DiagnosticExtract 模板和文件的预期方式。本章就新格式背后的整体概念提供进一步的背景信息,为理解第 4.2 章所述的元模型打下更好的基础。

3.1. 相关诊断元素的定义

ECU 配置不适合在 ECU 开发项目的伙伴之间交换:

除了使用 EcuC 格式的专有方式之外,EcuC 参数不适合交换的主要原因是它们过于接近实现(例如关于缓冲区大小的参数)。

汽车 OEM 与 ECU 供应商诊断开发流程的差异:

因此,从各公司的视角将所有诊断属性和需求标识为一个超集,构成了定义 DiagnosticExtract 模板的基础。

3.2. 从 EcuC 层级的抽象

DiagnosticExtract 模板不仅聚焦于相关的诊断属性和需求,还在需要时将它们提升到适当的抽象层级,使它们能够有意义地交换(例如从到具体 ECU 的映射中抽象出来的防抖需求)。

然而,对于许多被标识为相关的 EcuC 参数,抽象没有用也不需要,因此这些参数 1:1 映射到 DiagnosticExtract 模板的等价元素。

DiagnosticExtract 中包含的值应用于派生基础软件模块:

这意味着 Ecuc 中创建的参数值可能受约束支配,例如有效区间。

因此,应对照 EcuC 中表述的约束仔细检查 DiagnosticExtract 中的模型元素。不过,本文档不包含详细层面的具体约束。

3.3. 定义的独立性

在开发流程方面,与使用 EcuC 参数相比,DiagnosticExtract 格式还使诊断功能需求的定义具有更大的独立性。“分散式配置” 方法在 DiagnosticExtract 模板中主要通过以下子章所述的两种方式实现。

DiagnosticExtract 模板的大多数元素可以拆分到多个物理文件。因此,这些元素的部分(例如某些属性)可以由例如 OEM 定义,而这些元素的其他部分由例如 ECU 供应商定义。

3.3.2. 自包含映射元素的使用

许多诊断需求通过诊断元素之间的映射建立(例如 DTC 到 DemEvent 的映射)。然而,“分散式配置” 方法要求这些映射能够在 ECU 开发过程中的几乎任何时间由任何所涉及的公司( respective 角色)灵活定义。

因此,DiagnosticExtract 模板定义了自包含的映射元素,这些元素引用两个(或可能更多)诊断元素来定义映射。

自包含映射元素可以在要映射在一起的诊断元素被定义之后的任何时间创建。或者,可以仅在定义了一个诊断元素之后就创建映射元素,表明需要通过定义要映射到的附加诊断元素来补全映射。

4. 诊断资源

4.1. 概述

本章描述为描述诊断栈外部行为而定义的诊断资源。这些资源(例如诊断服务、诊断事件)的定义独立于它们在其他诊断资源或应用软件上下文中的使用。

诊断资源建模的描述可以粗略分为五个部分:

  • 一个公共部分,包含在诊断服务(大致对应于 Dcm)的描述与诊断事件处理(大致对应于 Dem)的描述之间共享的元类,见第 4.2 节。

  • 一个专门用于诊断服务配置的部分,见第 4.3 节。

  • 一个专门用于诊断事件处理配置的部分,见第 4.4 节。

  • 一个从诊断角度专门用于功能禁用配置的部分,见第 4.5 节。

  • 一个专门用于 J1939 诊断配置的部分,见第 4.6 节。

按照 [16] 中的描述,DiagnosticExtract 的建模支持对专用模型元素应用变体处理。

4.2. 公共元模型元素

4.2.1. 数据标识符、例程与数据元素

4.2.2. 概述

本章突出介绍在配置方面 AUTOSAR 诊断一些核心部分的形式化建模。有一些被广泛使用的概念需要在元模型中反映。

DiagnosticCommonElement 的目的是为各种诊断元素提供一个共同的引用目标。这方面在第 4.2.8 节中更详细地说明。

数据标识符(DID)的目的是将一个唯一的数值关联到一段与诊断相关的数据。从建模的角度来看,这意味着数据标识符的建模需要提供一个属性来表示

该数值,以及到一个代表一组诊断数据的数据元素的关系。

表4.1:DiagnosticCommonElement(DiagnosticCommonElement)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::CommonDiagnostics | | 说明 | This meta-class represents a common base class for all diagnostic elements. It does not contribute any specific functionality other than the ability to become the target of a reference. | | 基类 | ARElement , ARObject , CollectableElement , Identifiable , MultilanguageReferrable , Packageable Element , Referrable |

表4.2:DiagnosticCommonElement(DiagnosticCommonElement)

| 子类 | DiagnosticAbstractAliasEvent , DiagnosticAbstractDataIdentifier , DiagnosticAccessPermission, DiagnosticAging, DiagnosticAuthRole, DiagnosticCondition , DiagnosticConditionGroup , Diagnostic CustomServiceClass, DiagnosticDataIdentifierSet, DiagnosticEcuInstanceProps, Diagnostic EnvironmentalCondition, DiagnosticEvent, DiagnosticExtendedDataRecord, DiagnosticFimEventGroup, DiagnosticFreezeFrame, DiagnosticFunctionIdentifier, DiagnosticFunctionIdentifierInhibit, Diagnostic Indicator, DiagnosticInfoType, DiagnosticIumpr, DiagnosticIumprDenominatorGroup, DiagnosticIumpr Group, DiagnosticJ1939ExpandedFreezeFrame, DiagnosticJ1939FreezeFrame, DiagnosticJ1939Node, DiagnosticJ1939Spn, DiagnosticMapping , DiagnosticMeasurementIdentifier, DiagnosticMemory Destination , DiagnosticMemoryIdentifier, DiagnosticOperationCycle, DiagnosticParameterIdentifier, DiagnosticPowertrainFreezeFrame, DiagnosticProtocol, DiagnosticRoutine, DiagnosticSecurityLevel, DiagnosticServiceClass , DiagnosticServiceInstance , DiagnosticServiceTable, DiagnosticSession, DiagnosticTestResult, DiagnosticTestRoutineIdentifier, DiagnosticTroubleCode , DiagnosticTroubleCode Group, DiagnosticTroubleCodeProps | | 聚合于 | ARPackage.element |

4.2.3. 诊断数据标识符

AUTOSAR 诊断支持两种数据标识符:

  • DiagnosticDataIdentifier 继承自 DiagnosticAbstractDataIdentifier,用于定义在配置期完全已知的数据标识符。DiagnosticDataIdentifier 应至少有 1 个 dataElement。

  • DiagnosticDynamicDataIdentifier 继承自 DiagnosticAbstractDataIdentifier,用于定义只在运行时才完全已知的数据标识符。因此,没有在配置期定义 dataElement 的正式手段。

DiagnosticDataIdentifier . dataElement 的存在性:

表4.3:DiagnosticDataIdentifier(DiagnosticDataIdentifier)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::CommonDiagnostics | | 说明 | This meta-class represents the ability to model a diagnostic data identifier (DID) that is fully specified regarding the payload at configuration-time. Tags: atp.recommendedPackage=DiagnosticDataIdentifiers | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticAbstractDataIdentifier , DiagnosticCommon Element , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
Class DiagnosticDataIdentifier
dataElement DiagnosticParameter * aggr This is the dataElement associated with the Diagnostic DataIdentifier. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=dataElement.bitOffset, data Element.ident.shortName, dataElement.variation Point.shortLabel vh.latestBindingTime=postBuild
didSize PositiveInteger 0..1 attr This attribute indicates the size in bytes of the Diagnostic DataIdentifier.
representsVin Boolean 0..1 attr This attributes indicates whether the specific Diagnostic DataIdentifier represents the vehicle identification.
supportInfoByte DiagnosticSupportInfo Byte 0..1 aggr This attribute represents the supported information associated with the DiagnosticDataIdentifier.

表4.4:DiagnosticDynamicDataIdentifier(DiagnosticDynamicDataIdentifier)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::CommonDiagnostics | | 说明 | This meta-class represents the ability to define a diagnostic data identifier (DID) at run-time. Tags: atp.recommendedPackage=DiagnosticDataIdentifiers | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticAbstractDataIdentifier , DiagnosticCommon Element , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

表4.5:DiagnosticAbstractDataIdentifier(DiagnosticAbstractDataIdentifier)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::CommonDiagnostics | | 说明 | This meta-class represents an abstract base class for the modeling of a diagnostic data identifier (DID). | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 子类 | DiagnosticDataIdentifier, DiagnosticDynamicDataIdentifier | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
id PositiveInteger 0..1 attr This is the numerical identifier used to identify the DiagnosticAbstractDataIdentifier in the scope of diagnostic workflow Stereotypes: atpVariation Tags: vh.latestBindingTime=preCompileTime

DiagnosticAbstractDataIdentifier . id 属性的存在性:

DiagnosticDataIdentifier . representsVin 属性的目的:

因此,能够正式地指示这一特征很重要。为此提供了属性 DiagnosticDataIdentifier.representsVin。

DiagnosticDataIdentifier . representsVin 属性的存在性:

请注意,VIN 只在与 IP 相关的诊断(DoIP)上下文中相关。但是,没有约束将 [constr_1324] 的有效性限定于建立在 IP 协议栈之上的 DiagnosticConnection 的存在。

如果该属性存在但没有使用 IP,则该属性的含义根本无关紧要。无论如何,这种情况不应归咎于错误配置。

4.2.4. 诊断参数

4.2.4.1. 概述

元类 DiagnosticParameter 的角色:

为便于 DiagnosticParameter 的建模,定义了一个名为 DiagnosticAbstractParameter 的抽象元类,以便能够作出陈述(例如

DiagnosticAbstractParameter 的语义:

定义 DiagnosticParameter 的建模方法反映在图 4.2 中。

表4.6:DiagnosticParameter(DiagnosticParameter)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::CommonDiagnostics | | 说明 | This meta-class represents the ability to describe information relevant for the execution of a specific diagnostic service, i.e. it can be taken to parameterize the service. | | 基类 | ARObject , DiagnosticAbstractParameter | | 聚合于 | DiagnosticDataIdentifier.dataElement, DiagnosticExtendedDataRecord.recordElement, DiagnosticInfo Type.dataElement, DiagnosticParameterIdentifier.dataElement, DiagnosticRequestRoutineResults. request, DiagnosticRequestRoutineResults.response, DiagnosticStartRoutine.request, DiagnosticStart Routine.response, DiagnosticStopRoutine.request, DiagnosticStopRoutine.response |

属性 类型 多重性 种类 备注
ident DiagnosticParameter Ident 0..1 aggr The aggregation in the role ident provides the ability to make the DiagnosticAbstractParameter identifiable. From the semantical point of view, the AbstractDiagnostic Parameter is considered a first-class Identifiable and therefore the aggregation in the role ident shall always exist (until it may be possible to let AbstractDiagnostic Parameter directly inherit from Identifiable). Stereotypes: atpIdentityContributor
supportInfo DiagnosticParameter SupportInfo 0..1 aggr This attribute represents the ability to define which bit of the support info byte is representing this part of the PID.

表4.7:DiagnosticParameterElement(DiagnosticParameterElement)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::CommonDiagnostics | | 说明 | This meta-class represents an element of a DiagnosticParameter if the DiagnosticParameter represents a structure. | | 基类 | ARObject , DiagnosticAbstractParameter , DiagnosticServiceMappingDiagTarget , Identifiable , MultilanguageReferrable , Referrable | | 聚合于 | DiagnosticParameterElement.subElement, DiagnosticParameterIdent.subElement |

属性 类型 多重性 种类 备注
arraySize PositiveInteger 0..1 attr This attribute indicates that the enclosing Diagnostic ParameterElement represents an array and configures the array size in terms of the number of elements of the array.
subElement DiagnosticParameter Element * aggr This collection represents the sub-elements on the next lower level.

表4.8:DiagnosticParameterIdent(DiagnosticParameterIdent)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::CommonDiagnostics | | 说明 | This meta-class has been created to introduce the ability to become referenced into the meta-class AbstractDiagnosticParameter without breaking backwards compatibility. | | 基类 | ARObject , AtpClassifier , AtpFeature , AtpStructureElement , DiagnosticServiceMappingDiagTarget , Ident Caption , Identifiable , MultilanguageReferrable , Referrable | | 聚合于 | AtpClassifier .atpFeature, DiagnosticParameter.ident |

属性 类型 多重性 种类 备注
subElement DiagnosticParameter Element * aggr This collection represents the subElements on the top level.

表4.9:DiagnosticAbstractParameter(DiagnosticAbstractParameter)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::CommonDiagnostics | | 说明 | This meta-class represents an abstract base class for modeling a diagnostic parameter. | | 基类 | ARObject | | 子类 | DiagnosticParameter, DiagnosticParameterElement |

属性 类型 多重性 种类 备注
bitOffset PositiveInteger 0..1 attr This represents the bitOffset of the DiagnosticParameter. The value of the bitOffset shall always be interpreted as relative to the start of the enclosing DiagnosticData Identifier, DiagnosticParameterIdentifier, or Diagnostic RoutineSubfunction. Stereotypes: atpIdentityContributor Tags: atp.Status=candidate
dataElement DiagnosticDataElement 0..1 aggr This represents the related dataElement of the Diagnostic Parameter Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=dataElement.shortName, data Element.variationPoint.shortLabel vh.latestBindingTime=postBuild
parameterSize PositiveInteger 0..1 attr This attribute allows for the specification of the parameter size. This information is relevant if there is a gap between one diagnostic parameter and the following diagnostic parameter (or the tail of the telegram). The unit is bit and the values shall be multiples of 8. Tags: atp.Status=candidate
4.2.4.2. 诊断参数的大小

DiagnosticAbstractParameter 的大小:

  • 如果角色 DiagnosticAbstractParameter.dataElement 中的聚合存在,则槽的大小由属性 DiagnosticAbstractParameter.dataElement.swDataDefProps.baseType.baseTypeSize 的值定义。属性 baseTypeSize 的单位是位。

  • 如果聚合 DiagnosticAbstractParameter.dataElement 不存在,则槽的大小由属性 DiagnosticAbstractParameter.parameterSize 的值定义。属性 parameterSize 的单位是位。

DiagnosticAbstractParameter . parameterSize 的语义:

如果下一个 DiagnosticAbstractParameter(或报文的结尾)没有直接紧邻当前 DiagnosticAbstractParameter 放置,即两个相邻的 DiagnosticAbstractParameter 之间存在间隙,则该信息是相关的。

4.2.4.3. 诊断参数的起始位置

DiagnosticAbstractParameter 的起始位置:

DiagnosticAbstractParameter . bitOffset 属性的存在性:

DiagnosticAbstractParameter.bitOffset 的值:

4.2.4.4. 诊断参数的内容

诊断参数的内容:

  • DiagnosticParameter 在角色 dataElement 中聚合 DiagnosticDataElement。

  • DiagnosticParameter 通过聚合 DiagnosticParameter.ident.subElement 包含一个由 DiagnosticParameterElement 组成的子结构。在这种情况下,实际内容的定义(递归地)委托给该子结构。

请注意,角色 subElement 中聚合的存在可以用来形成类似于数组或结构(包括两者的混合)的嵌套层级。

另请注意,定义具有数组语义的 subElement 的能力与 DiagnosticDataElement 已有的能力有一定冗余,后者可以定义 “原始” 内容的数组。

为减少冗余程度,具有数组语义的 subElement 应只用于 “非原始” 内容的数组的定义,即表示该数组的 DiagnosticParameterElement 应有进一步的 subElement(见 [constr_10369])。

dataElement vs. parameterSize of metaclass DiagnosticParameter 属性的存在性:

  • dataElement 或

  • parameterSize

应在 DEXT 完成时存在。

DiagnosticParameter 的嵌套定义:

这样,就可以复制 AutosarDataPrototype 的嵌套结构,使得

  • 整个结构化的 AutosarDataPrototype,或

  • 结构化数据对象的部分(即 DataPrototype)

能够被映射到结构化 DiagnosticParameter 定义中的相应位置。

结构化 DiagnosticParameter 的定义通过在角色 ident.subElement 中聚合 DiagnosticParameterElement 来完成。

结构化的 DiagnosticParameter 可以有一个本身也表示结构的 ident.subElement。为此,ident.subElement 在角色 subElement 中聚合 DiagnosticParameterElement。

请注意:在 AUTOSAR 中,category 为 LEAF 的规范命名方法很可能归结为值 VALUE。但在这个特定情况下,所包含的 DiagnosticDataElement 可能表示原始元素的数组。因此,在这种情况下使用 VALUE 可能产生误导。

attributes of DiagnosticParameterElement depending on the value of attribute category 的存在性:

| Value of category | Description |

| LEAF | The DiagnosticParameterElement represents a 'leaf' element of a nested structure. | | ARRAY | The DiagnosticParameterElement represents an array, i.e references to this DiagnosticParameterElement shall define a value for the attribute index . Arrays of 'primitive' types are defined in the context of the DiagnosticDataElement | | STRUCTURE | The DiagnosticParameterElement represents a structure with one or more elements. |

该规则应在 DEXT 完成时施加。

嵌套 DiagnosticParameter 定义的示例见第 B.1 节。

4.2.4.5. 作为引用目标的诊断参数

作为引用目标的 DiagnosticParameter:

但 DiagnosticParameter 本身没有定义 shortName 的能力,因此需要聚合角色 ident 中的 DiagnosticParameterIdent 来填补这一空缺。

如果 DiagnosticParameter 直接定义 dataElement(即聚合 DiagnosticParameter.ident.subElement 不存在),则不要求在角色 ident 中聚合 DiagnosticParameterIdent。

4.2.5. 诊断数据元素

数据元素的概念表示从 DID 所标识的数据中分解出来的一段信息,它在 DEM 与例如测试仪之间交换。

这样的数据元素的性质可以与 ISignal 的性质相比较,因此通过元类 DiagnosticDataElement 对数据元素的建模在角色 swDataDefProps 中聚合 SwDataDefProps,以提供对 SwBaseType 的引用。

SwDataDefProps 的聚合也可用于引用 DataConstr,以便为 DiagnosticDataElement 规定有效的数据范围。

DiagnosticDataElement.maxNumberOfElements 的值取决于其存在性:

表4.10:DiagnosticDataElement(DiagnosticDataElement)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::CommonDiagnostics | | 说明 | This meta-class represents the ability to describe a concrete piece of data to be taken into account for diagnostic purposes. | | 基类 | ARObject , DiagnosticServiceMappingDiagTarget , Identifiable , MultilanguageReferrable , Referrable | | 聚合于 | DiagnosticAbstractParameter .dataElement |

属性 类型 多重性 种类 备注
arraySize Semantics ArraySizeSemantics Enum 0..1 attr This attribute controls the meaning of the value of the array size.
maxNumberOf Elements PositiveInteger 0..1 attr The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take.
scalingInfoSize PositiveInteger 0..1 attr Size in bytes of scaling information for the DiagnosticData Element if used with DiagnosticReadScalingDataBy Identifier
swDataDef Props SwDataDefProps 0..1 aggr This property allows to specify data definition properties in order to support the definition of e.g. computation formulae and data constraints. Stereotypes: atpSplitable Tags: atp.Splitkey=swDataDefProps

在通过 sender-receiver 通信获得的 DID 上下文中使用的 DiagnosticDataElement 的定义:

  • NONE(用于 8、16 或 32 位)或

  • 2C(用于 8、16 或 32 位)或

  • IEEE754(用于 32 位)。

1 它表示 “常规” 总线通信中的载荷。

在这种情况下,可以将 DiagnosticDataElement 定义为标量或数组(见 [TPS_DEXT_01001]、[TPS_DEXT_01002])。

在通过 client/server 通信获得的 DID 上下文中使用的 DiagnosticDataElement 的定义:

  • NONE(用于 8、16 或 32 位)或

  • 2C(用于 8、16 或 32 位)或

  • IEEE754(用于 32 位)。

在这种情况下,只能将 DiagnosticDataElement 定义为数组(见 [TPS_DEXT_01001]、[TPS_DEXT_01002])。定义可变大小数组的能力应只用于 DID 的最后一个元素。

在诊断例程上下文中使用的 DiagnosticDataElement 的定义:

  • NONE(用于 8、16 或 32 位)或

  • 2C(用于 8、16 或 32 位)或

  • IEEE754(用于 32 位)。

在这种情况下,可以将 DiagnosticDataElement 定义为标量或数组(见 [TPS_DEXT_01001]、[TPS_DEXT_01002])。定义可变大小数组的能力应只用于诊断例程的最后一个实参。

| Enumeration | ArraySizeSemanticsEnum |

| Package | M2::AUTOSARTemplates::CommonStructure::ImplementationDataTypes | | Note | This type controls how the information about the number of elements in an ApplicationArrayDataType is to be interpreted. | | Aggregated by | ApplicationArrayElement.arraySizeSemantics, DiagnosticDataElement.arraySizeSemantics, ImplementationDataTypeElement.arraySizeSemantics, SwTextProps.arraySizeSemantics | | Literal | Description |

| Enumeration | ArraySizeSemanticsEnum |

| fixedSize | This means that the ApplicationArrayDataType will always have a fixed number of elements. Tags: atp.EnumerationLiteralIndex=0 | | variableSize | This implies that the actual number of elements in the ApplicationArrayDataType might vary at run-time. The value of arraySize represents the maximum number of elements in the array. Tags: atp.EnumerationLiteralIndex=1 |

如果要强制 DID 数据的大小,应使用属性 DiagnosticDataIdentifier.didSize。

被 DiagnosticDataIdentifierSet 引用的元类 DiagnosticDataIdentifier:

  • DiagnosticDataIdentifier 不聚合任何 DiagnosticParameter(后者又通过 DiagnosticParameterIdent 的聚合聚合一个 DiagnosticParameterElement)。

  • 各个元素之间(即从单个 DiagnosticDataElement 的开始——由 DiagnosticParameter.bitOffset 指示——到所聚合 DiagnosticDataElement 的长度之间)或在 DiagnosticDataIdentifier 的结尾(由属性 DiagnosticDataIdentifier.didSize 指示)不应存在间隙。

DiagnosticDataIdentifier 中包含的(通过角色 dataElement 中 DiagnosticParameter 的聚合)各个 DiagnosticDataElement 应满足以下条件之一:

  • DiagnosticDataElement 完全不定义属性 maxNumberOfElements。

  • 属性 DiagnosticDataElement.arraySizeSemantics 的建模应遵循 [TPS_DEXT_01001] 中的描述。

该规则应在 DEXT 完成时施加。

关于引用 DiagnosticDataIdentifierSet.dataIdentifier 的限制:

该规则应在 DEXT 完成时施加。

[constr_10368] 存在的理由:在此上下文中,不存在定义嵌套 DiagnosticParameter 的有效用例。

DiagnosticDataIdentifier.supportInfoByte 的适用性:

DiagnosticDataIdentifier.supportInfoByte 存在的典型情形是认定该 DiagnosticDataIdentifier 与 OBD 相关且 DiagnosticDataIdentifier.id 处于指定范围内。

DiagnosticDataIdentifier . supportInfoByte 的存在性:

该规则应在 DEXT 完成时施加。

4.2.5.1. SwDataDefProps 的使用

请注意,诊断数据元素的计算方法、限值或单位等属性的定义基于 AUTOSAR 元模型的共享资源,即通过元类 SwDataDefProps 的聚合。

DiagnosticDataElement.swDataDefProps 允许的 SwDataDefProps 属性:

| Attributes of SwDataDefProps | DiagnosticDataElement . swDataDefProps |

| additionalNativeTypeQualifier | | | annotation | | | baseType . baseTypeDefinition . baseTypeEncoding | D | | baseType . baseTypeDefinition . baseTypeSize | D | | baseType . baseTypeDefinition . byteOrder | D | | baseType . baseTypeDefinition . memAlignment | | | baseType . baseTypeDefinition . nativeDeclaration | | | compuMethod | D | | dataConstr | D | | displayFormat | D | | displayPresentation | | | implementationDataType | | | invalidValue | | | swAddrMethod | | | swAlignment | | | swBitRepresentation | | | swCalibrationAccess | | | swCalprmAxisSet | |

2 在 AUTOSAR 中形式化为 CompuMethod。

3 在 AUTOSAR 中形式化为 DataConstr。

4 在 AUTOSAR 中形式化为 Unit。

| glyph[triangle] | |

| Attributes of SwDataDefProps | DiagnosticDataElement . swDataDefProps | | swComparisonVariable | | | swDataDependency | | | swImplPolicy | | | swIntendedResolution | | | swInterpolationMethod | | | swIsVirtual | | | swPointerTargetProps | | | swRecordLayout | | | swRefreshTiming | | | swTextProps | | | swValueBlockSize | | | unit | D | | valueAxisDataType | |

该规则应在 DEXT 完成时施加。

以下图例适用于 [constr_1325]:

| Abbr. | Description |

| D | Define the attribute independent from settings to the left. | | I | Inherit the definition from the left for usage in the scope of this element. | | empty cell | Attribute is not applicable for usage in the scope of this element. | | M | Attribute is meaningless in the scope of this element. As it was allowed in previous versions, declaring it as Not Applicable (NA) would break compatibility. Tools shall ignore such an attribute without a warning. |

表 “DiagnosticDataElement.swDataDefProps 允许的 SwDataDefProps 属性” 的图例

该元类贡献了大量与一般数据定义相关、在此情形下尤其与诊断相关的可能属性。

然而,必须理解 SwDataDefProps 的表现力和通用性非常强,因此对于具体部署,需要根据源自被 SwDataDefProps 修饰的数据片段的语义的要求对其适用性加以约束(在此特定情况下见 [constr_1325])。

请注意,与其他 AUTOSAR 文档(例如 [9])中出现的类似约束相比,[constr_1325] 有意更详细地规定了 SwBaseType 属性的适用性。这与例如软件组件模板规范 [9] 中包含的类似约束形成对比。

SwBaseType 的属性被认为对定义外围 DiagnosticDataElement 的语义至关重要,因此这种强调是合理的。

表4.11:SwDataDefProps(SwDataDefProps)

| 包 | | | 说明 | M2::MSR::DataDictionary::DataDefProperties This class is a collection of properties relevant for data objects under various aspects. One could consider this class as a "pattern of inheritance by aggregation". The properties can be applied to all objects of all classes in which SwDataDefProps is aggregated. Note that not all of the attributes or associated elements are useful all of the time. Hence, the process definition (e.g. expressed with an OCL or a Document Control Instance MSR-DCI) has the task of implementing limitations. SwDataDefProps covers various aspects: • Structure of the data element for calibration use cases: is it a single value, a curve, or a map, but also the recordLayouts which specify how such elements are mapped/converted to the DataTypes in the programming language (or in AUTOSAR). This is mainly expressed by properties like swRecordLayout and swCalprmAxisSet • Implementation aspects, mainly expressed by swImplPolicy, swVariableAccessImplPolicy, swAddr Method, swPointerTagetProps, baseType, implementationDataType and additionalNativeTypeQualifier • Access policy for the MCD system, mainly expressed by swCalibrationAccess • Semantics of the data element, mainly expressed by compuMethod and/or unit, dataConstr, invalid Value • Code generation policy provided by swRecordLayout Tags: vh.latestBindingTime=codeGenerationTime | | 基类 | ARObject | | 聚合于 | AutosarDataType .swDataDefProps, CompositeNetworkRepresentation.networkRepresentation, Data Prototype .swDataDefProps, DataPrototypeTransformationProps.networkRepresentationProps, DiagnosticDataElement.swDataDefProps, DiagnosticEnvDataElementCondition.swDataDefProps, Dlt Argument.networkRepresentation, FlatInstanceDescriptor.swDataDefProps, ImplementationDataType Element.swDataDefProps, InstantiationDataDefProps.swDataDefProps, ISignal.networkRepresentation Props, McDataInstance.resultingProperties, ParameterAccess.swDataDefProps, PerInstanceMemory.sw DataDefProps, ReceiverComSpec .networkRepresentation, SenderComSpec .networkRepresentation, SomeipDataPrototypeTransformationProps.networkRepresentation, SwPointerTargetProps.swDataDef Props, SwServiceArg.swDataDefProps, SwSystemconst.swDataDefProps, SystemSignal.physicalProps |

属性 类型 多重性 种类 备注
additionalNative TypeQualifier NativeDeclarationString 0..1 attr This attribute is used to declare native qualifiers of the programming language which can neither be deduced from the baseType (e.g. because the data object describes a pointer) nor from other more abstract attributes. Examples are qualifiers like "volatile", "strict" or "enum" of the C-language. All such declarations have to be put into one string. Tags: xml.sequenceOffset=235
annotation Annotation * aggr This aggregation allows to add annotations (yellow pads ...) related to the current data object. Tags: xml.roleElement=true xml.roleWrapperElement=true xml.sequenceOffset=20 xml.typeElement=false xml.typeWrapperElement=false
baseType SwBaseType 0..1 ref Base type associated with the containing data object. Tags: xml.sequenceOffset=50
compuMethod CompuMethod 0..1 ref Computation method associated with the semantics of this data object. Tags: xml.sequenceOffset=180
dataConstr DataConstr 0..1 ref Data constraint for this data object. Tags: xml.sequenceOffset=190
Class <> SwDataDefProps
displayFormat DisplayFormatString 0..1 attr This property describes how a number is to be rendered e.g. in documents or in a measurement and calibration system. Tags: xml.sequenceOffset=210
display Presentation DisplayPresentation Enum 0..1 attr This attribute controls the presentation of the related data for measurement and calibration tools.
implementation DataType AbstractImplementation DataType 0..1 ref This association denotes the ImplementationDataType of a data declaration via its aggregated SwDataDefProps. It is used whenever a data declaration is not directly referring to a base type. Especially • redefinition of an ImplementationDataType via a "typedef" to another ImplementationDatatype • the target type of a pointer (see SwPointerTarget Props), if it does not refer to a base type directly • the data type of an array or record element within an ImplementationDataType, if it does not refer to a base type directly • the data type of an SwServiceArg, if it does not refer to a base type directly
invalidValue ValueSpecification 0..1 aggr Optional value to express invalidity of the actual data element. Tags: xml.sequenceOffset=255
stepSize Float 0..1 attr This attribute can be used to define a value which is added to or subtracted from the value of a DataPrototype when using up/down keys while calibrating.
swAddrMethod SwAddrMethod 0..1 ref Addressing method related to this data object. Via an association to the same SwAddrMethod it can be specified that several DataPrototypes shall be located in the same memory without already specifying the memory section itself. Tags: xml.sequenceOffset=30
swAlignment AlignmentType 0..1 attr The attribute describes the intended typical alignment of the DataPrototype. If the attribute is not defined the alignment is determined by the swBaseType size and the memoryAllocationKeywordPolicy of the referenced Sw AddrMethod. Tags: xml.sequenceOffset=33
swBit Representation SwBitRepresentation 0..1 aggr Description of the binary representation in case of a bit variable. Tags: xml.sequenceOffset=60
swCalibration Access SwCalibrationAccess Enum 0..1 attr Specifies the read or write access by MCD tools for this data object. Tags: xml.sequenceOffset=70
swCalprmAxis Set SwCalprmAxisSet 0..1 aggr This specifies the properties of the axes in case of a curve or map etc. This is mainly applicable to calibration parameters. Tags: xml.sequenceOffset=90
swComparison Variable SwVariableRefProxy * aggr Variables used for comparison in an MCD process. Tags: xml.sequenceOffset=170 xml.typeElement=false
Class <> SwDataDefProps
swData Dependency SwDataDependency 0..1 aggr Describes how the value of the data object has to be calculated from the value of another data object (by the MCD system). Tags: xml.sequenceOffset=200
swHostVariable SwVariableRefProxy 0..1 aggr Contains a reference to a variable which serves as a host-variable for a bit variable. Only applicable to bit objects. Tags: xml.sequenceOffset=220 xml.typeElement=false
swImplPolicy SwImplPolicyEnum 0..1 attr Implementation policy for this data object. Tags: xml.sequenceOffset=230
swIntended Resolution Numerical 0..1 attr The purpose of this element is to describe the requested quantization of data objects early on in the design process. The resolution ultimately occurs via the conversion formula present (compuMethod), which specifies the transition from the physical world to the standardized world (and vice-versa) (here, "the slope per bit" is present implicitly in the conversion formula). In the case of a development phase without a fixed conversion formula, a pre-specification can occur through swIntendedResolution. The resolution is specified in the physical domain according to the property "unit".
swInterpolation Method Identifier 0..1 attr This is a keyword identifying the mathematical method to be applied for interpolation. The keyword needs to be related to the interpolation routine which needs to be invoked.
swIsVirtual Boolean 0..1 attr This element distinguishes virtual objects. Virtual objects do not appear in the memory, their derivation is much more dependent on other objects and hence they shall have a swDataDependency . Tags: xml.sequenceOffset=260
swPointerTarget Props SwPointerTargetProps 0..1 aggr Specifies that the containing data object is a pointer to another data object. Note: This atpSplitable property has no atp.Splitkey due to atpVariation (PropertySetPattern). Stereotypes: atpSplitable Tags: xml.sequenceOffset=280
swRecord Layout SwRecordLayout 0..1 ref Record layout for this data object. Tags: xml.sequenceOffset=290

表4.12:SwDataDefProps(SwDataDefProps)

属性 类型 多重性 种类 备注
swRefresh Timing MultidimensionalTime 0..1 aggr This element specifies the frequency in which the object involved shall be or is called or calculated. This timing can be collected from the task in which write access processes to the variable run. But this cannot be done by the MCD system. So this attribute can be used in an early phase to express the desired refresh timing and later on to specify the real refresh timing. Tags: xml.sequenceOffset=300
swTextProps SwTextProps 0..1 aggr the specific properties if the data object is a text object. Tags: xml.sequenceOffset=120
swValueBlock Size Numerical 0..1 attr This represents the size of a Value Block Stereotypes: atpVariation Tags: vh.latestBindingTime=preCompileTime xml.sequenceOffset=80
swValueBlock SizeMult (ordered) Numerical * attr This attribute is used to specify the dimensions of a value block (VAL_BLK) for the case that that value block has more than one dimension. The dimensions given in this attribute are ordered such that the first entry represents the first dimension, the second entry represents the second dimension, and so on. For one-dimensional value blocks the attribute swValue BlockSize shall be used and this attribute shall not exist. Stereotypes: atpVariation Tags: vh.latestBindingTime=preCompileTime
unit Unit 0..1 ref Physical unit associated with the semantics of this data object. This attribute applies if no compuMethod is specified. If both units (this as well as via compuMethod) are specified the units shall be compatible. Tags: xml.sequenceOffset=350
valueAxisData Type ApplicationPrimitive DataType 0..1 ref The referenced ApplicationPrimitiveDataType represents the primitive data type of the value axis within a compound primitive (e.g. curve, map). It supersedes CompuMethod, Unit, and BaseType. Tags: xml.sequenceOffset=355

4.2.6. 在 DiagnosticDataElement 层级定义数组

DiagnosticDataElement 实际表示信息数组有若干用例。在某些情况下,数组大小是静态的、在运行时不会改变;在另一些情况下,数组大小需要在运行时改变以实现预期目的。

固定大小数组的定义:

  1. 属性 DiagnosticDataElement.maxNumberOfElements 存在。

  2. 属性 DiagnosticDataElement.maxNumberOfElements 的值设置为 > 0 的值。

  3. DiagnosticDataElement.arraySizeSemantics 的值要么不存在,要么设置为 ArraySizeSemanticsEnum.fixedSize。

可变大小数组的定义:

  1. 属性 DiagnosticDataElement.maxNumberOfElements 存在。

  2. 属性 DiagnosticDataElement.maxNumberOfElements 的值设置为 > 0 的值。

  3. DiagnosticDataElement.arraySizeSemantics 的值设置为 ArraySizeSemanticsEnum.variableSize。

DiagnosticDataElement.maxNumberOfElements 的值应被视为以元素数量表示的最大数组大小。

a variable-sized array 的存在性:

该规则应在 DEXT 完成时施加。

4.2.6.1. 文本字符串的定义

DiagnosticDataElement 可用于建模将由测试仪发送到 ECU 或从 ECU 接收的文本字符串。

在这种情况下,有必要定义预期的编码,使得 ECU 上产生或消费该字符串的软件部分(在建立 DiagnosticMapping 之后)能够对照匹配的编码规范进行检查。

DiagnosticDataElement 范围内的编码可以使用属性 DiagnosticDataElement.swDataDefProps.baseType.baseTypeDefinition.baseTypeEncoding 定义。

4.2.7. 文本形式文档

数据标识符通常还附带一些简要说明数据标识符含义的文本描述。这一能力通过

继承自 Identifiable 获得,特别是通过属性 desc 和/或 introduction(见图 4.3)。

这也意味着添加某种文本描述的能力在 DiagnosticExtract 的范围内被广泛使用。许多元类派生自例如 DiagnosticCommonElement(它继承自 Identifiable)或直接派生自 Identifiable,因此都适用于所述形式的文档。

换言之,图 4.3 和图 4.4 所描述的技术不仅限于 DiagnosticDataElement,而是在 DiagnosticExtract 的上下文中具有更广泛的适用性。

关于随给定诊断元素一起规定文本内容的细节在图 4.4 中详述。

实际上,DocumentationBlock 提供了非常完善的能力来定义结构化文本,例如可以由多个段落组成(由在角色 p 中聚合的元类 MultiLanguageOverviewParagraph 形式化)。

除了附加结构化文本的能力之外,还可以使用注解(见图 4.3)为诊断元素添加简短注释(类似于便利贴的用法)。

表4.13:DocumentationBlock(DocumentationBlock)

| 包 | M2::MSR::Documentation::BlockElements | | 说明 | This class represents a documentation block. It is made of basic text structure elements which can be displayed in a table cell. | | 基类 | ARObject | | 聚合于 | ApplicabilityInfo.remark, AUTOSAR.introduction, BlueprintGenerator.introduction, BlueprintPolicy Modifiable .blueprintDerivationGuide, ClientServerOperationBlueprintMapping.blueprintMappingGuide, DataMapping .introduction, DefItem.def, Describable .introduction, EcucAddInfoParamValue.value, Ecu ResourceEstimation.introduction, Entry.entryContents, FrameMapping.introduction, GeneralAnnotation . annotationText, Identifiable .introduction, IPduMapping.introduction, ISignalMapping.introduction, Item. itemContents, LabeledItem.itemContents, LifeCycleInfo.remark, MappingConstraint .introduction, Msr QueryP2.msrQueryResultP2, Note.noteText, PortDefinedArgumentBlueprint.blueprintMappingGuide, PrmChar.cond, PrmChar.remark, ScheduleTableEntry .introduction, SignalPathConstraint .introduction, StructuredReq.conflicts, StructuredReq.dependencies, StructuredReq.description, StructuredReq. rationale, StructuredReq.remark, StructuredReq.supportingMaterial, StructuredReq.useCase, SwAxis Type.swGenericAxisDesc, TopicContent.blockLevelContent, TraceableText.text, VariationPoint.blueprint Condition |

属性 类型 多重性 种类 备注
defList DefList 0..1 aggr This represents a definition list in the documentation block. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=defList, defList.variationPoint.shortLabel vh.latestBindingTime=postBuild xml.sequenceOffset=40
figure MlFigure 0..1 aggr This represents a figure in the documentation block. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=figure, figure.variationPoint.shortLabel vh.latestBindingTime=postBuild xml.sequenceOffset=70
formula MlFormula 0..1 aggr This is a formula in the definition block. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=formula, formula.variationPoint.shortLabel vh.latestBindingTime=postBuild xml.sequenceOffset=60
labeledList LabeledList 0..1 aggr This represents a labeled list. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=labeledList, labeledList.variationPoint.short Label vh.latestBindingTime=postBuild xml.sequenceOffset=50
list List 0..1 aggr This represents numbered or unnumbered list. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=list, list.variationPoint.shortLabel vh.latestBindingTime=postBuild xml.sequenceOffset=30
msrQueryP2 MsrQueryP2 0..1 aggr This represents automatically contributed contents provided by an msrquery in the context of Documentation Block.
Class <> DocumentationBlock
note Note 0..1 aggr This represents a note in the text flow. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=note, note.variationPoint.shortLabel vh.latestBindingTime=postBuild xml.sequenceOffset=80
p MultiLanguage Paragraph 0..1 aggr This is one particular paragraph. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=p, p.variationPoint.shortLabel vh.latestBindingTime=postBuild xml.sequenceOffset=10
structuredReq StructuredReq 0..1 aggr This aggregation supports structured requirements embedded in a documentation block. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=structuredReq.shortName, structured Req.variationPoint.shortLabel vh.latestBindingTime=postBuild xml.sequenceOffset=100
trace TraceableText 0..1 aggr This represents traceable text in the documentation block. This allows to specify requirements/constraints in any documentation block. The kind of the trace is specified in the category. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=trace.shortName, trace.variationPoint.short Label vh.latestBindingTime=postBuild xml.sequenceOffset=90
verbatim MultiLanguageVerbatim 0..1 aggr This represents one particular verbatim text. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=verbatim, verbatim.variationPoint.shortLabel vh.latestBindingTime=postBuild xml.sequenceOffset=20

表4.14:DocumentationBlock(DocumentationBlock)

| 包 | M2::MSR::Documentation::TextModel::MultilanguageData | | 说明 | This is the content of a multilingual paragraph in an overview item. | | 基类 | ARObject | | 聚合于 | Caption.desc, CompuScale.desc, Describable .desc, Identifiable .desc, LabeledItem.itemLabel, Modification.change, Modification.reason, ScaleConstr.desc, SdgCaption.desc, SwRecordLayoutGroup. desc, SwRecordLayoutV.desc, VariationPoint.desc |

表4.15:MultiLanguageOverviewParagraph(MultiLanguageOverviewParagraph)

属性 类型 多重性 种类 备注
l2 LOverviewParagraph 1..* aggr This represents the text in one particular language. Tags: xml.roleElement=true xml.roleWrapperElement=false xml.sequenceOffset=20 xml.typeElement=false xml.typeWrapperElement=false

4.2.8. 诊断贡献

DiagnosticContributionSet 是 DiagnosticExtract 的核心部分:

在某种程度上,它扮演着与通信域中 System [6] 类似的角色。

DiagnosticContributionSet 维护对 DiagnosticCommonElement 的引用,借此完成诊断贡献范围的实际定义。

换言之,给定贡献的实际范围由 DiagnosticContributionSet 所引用的 DiagnosticCommonElement 集合创建。

DiagnosticContributionSet 定义 DiagnosticExtract 的范围:

换言之,DiagnosticContributionSet 扮演着与 System 类似的关键角色:它定义给定诊断行为描述的有效范围。

诊断行为描述的任何下游处理都应从作为诊断行为描述根元素的 DiagnosticContributionSet 的定义中获取要处理的信息范围。

在设计方法论的不同阶段,DiagnosticContributionSet 的范围可以从整个系统的范围变化到特定一级供应商对更大上下文的贡献。

DiagnosticContributionSet.category 的标准化值:

DIAGNOSTICS_ABSTRACT_SYSTEM_DESCRIPTION:此 DiagnosticContributionSet 表示一个或多或少的高层定义,可以作为创建 category 为 DIAGNOSTICS_SYSTEM_EXTRACT 或 DIAGNOSTICS_ECU_EXTRACT 的具体 DiagnosticContributionSet 的模板。

DIAGNOSTICS_SYSTEM_EXTRACT:此 DiagnosticContributionSet 的范围由多个 EcuInstance 组成。

DIAGNOSTICS_ECU_EXTRACT:此 DiagnosticContributionSet 的范围由单个 EcuInstance 组成。category 为 DIAGNOSTICS_ECU_EXTRACT 的 DiagnosticContributionSet 应作为派生诊断栈服务软件组件的基础。

DiagnosticEcuInstanceProps . ecuInstance 的多重性:

该规则应在 DEXT 完成时施加。

DiagnosticEcuInstanceProps.ecuInstance 与 DiagnosticServiceTable.ecuInstance 的一致性:

该规则应在 DEXT 完成时施加。

请注意,[constr_1328] 解决了元模型中的一种有意冗余。DiagnosticContributionSet 和 DiagnosticServiceTable 都能引用 EcuInstance,其想法是两者可以彼此独立地建模。

当然,一旦 DiagnosticContributionSet 和 DiagnosticServiceTable 被集成到同一上下文中(特别是通过建立引用 DiagnosticContributionSet.serviceTable),对适用 EcuInstance 的各个引用就需要保持一致。

DiagnosticContributionSet 可以独立存在:

阐述了使 DiagnosticExtract 独立于上下文存在的一个重要方面。例如,本来可以把 DiagnosticContributionSet 聚合在某个地方,例如 System 处。:

就模型粒度而言,这种建模有意将 DiagnosticContributionSet 置于例如 System 的同一层级。

表4.16:DiagnosticContributionSet(DiagnosticContributionSet)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticContribution | | 说明 | This meta-class represents a root node of a diagnostic extract. It bundles a given set of diagnostic model elements. The granularity of the DiagonsticContributionSet is arbitrary in order to support the aspect of decentralized configuration, i.e. different contributors can come up with an own DiagnosticContribution Set. Tags: atp.recommendedPackage=DiagnosticContributionSets | | 基类 | ARElement , ARObject , CollectableElement , Identifiable , MultilanguageReferrable , Packageable Element , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
common Properties DiagnosticCommon Props 0..1 aggr This attribute represents a collection of diagnostic properties that are shared among the entire Diagnostic ContributionSet. Stereotypes: atpSplitable Tags: atp.Splitkey=commonProperties
element DiagnosticCommon Element * ref This represents a DiagnosticCommonElement considered in the context of the DiagnosticContributionSet Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=element.diagnosticCommonElement, element.variationPoint.shortLabel vh.latestBindingTime=postBuild

表4.17:DiagnosticContributionSet(DiagnosticContributionSet)

属性 类型 多重性 种类 备注
serviceTable DiagnosticServiceTable * ref This represents the collection of DiagnosticServiceTables to be considered in the scope of this Diagnostic ContributionSet. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=serviceTable.diagnosticServiceTable, service Table.variationPoint.shortLabel vh.latestBindingTime=postBuild

DiagnosticContributionSet 的目的是引用在 DiagnosticContributionSet 上下文中相关的所有 DiagnosticCommonElement。

一个给定的 DiagnosticCommonElement 仅被另一个 DiagnosticCommonElement 引用、而未被同样引用了该引用方 DiagnosticCommonElement 的那个 DiagnosticContributionSet 引用,是不够的。

到 DiagnosticCommonElement 的间接引用:

该规则应在 DEXT 完成时施加。

被某个 DiagnosticDataIdentifierSet 引用的 DiagnosticDataIdentifier——而该 DiagnosticDataIdentifierSet 又被某个 DiagnosticContributionSet 引用——也应被该 DiagnosticContributionSet 引用。该场景描绘于图 4.6。

4.2.9. 诊断协议

DiagnosticProtocol 的语义:

表4.18:DiagnosticProtocol(DiagnosticProtocol)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticContribution | | 说明 | This meta-class represents the ability to define a diagnostic protocol. Tags: atp.recommendedPackage=DiagnosticProtocols | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
diagnostic Connection DiagnosticConnection * ref This represents the collection of applicable Diagnostic Connections for this DiagnosticProtocol. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=diagnosticConnection.diagnosticConnection, diagnosticConnection.variationPoint.shortLabel vh.latestBindingTime=postBuild
priority PositiveInteger 0..1 attr This represents the priority of the diagnostic protocol in comparison to other diagnostic protocols. Lower numeric values represent higher protocol priority: • 0 - Highest protocol priority • 255 - Lowest protocol priority Stereotypes: atpVariation
protocolKind NameToken 0..1 attr This identifies the applicable protocol.
sendRespPend OnTransToBoot Boolean 0..1 attr The purpose of this attribute is to define whether or not the ECU should send a NRC 0x78 (response pending) before transitioning to the bootloader (in this case the attribute shall be set to "true") or if the transition shall be initiated without sending NRC 0x78 (in this case the attribute shall be set to "false"). Stereotypes: atpVariation Tags: vh.latestBindingTime=preCompileTime
serviceTable DiagnosticServiceTable 0..1 ref This represents the service table applicable for the given diagnostic protocol. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=serviceTable.diagnosticServiceTable, service Table.variationPoint.shortLabel vh.latestBindingTime=postBuild

DiagnosticProtocol . priority 属性的存在性:

DiagnosticProtocol . protocolKind 属性的存在性:

每个 DiagnosticProtocol 最多引用一个 DiagnosticServiceTable 和一个 DiagnosticConnection 集合。

请注意,DiagnosticServiceTable 和 DiagnosticProtocol 都有一个名为 protocolKind 的属性。

表4.19:DiagnosticServiceTable(DiagnosticServiceTable)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticContribution | | 说明 | This meta-class represents a model of a diagnostic service table, i.e. the UDS services applicable for a given ECU. Tags: atp.recommendedPackage=DiagnosticServiceTables | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
diagnostic Connection DiagnosticConnection * ref This represents the DiagnosticConnection that is taken for handling the data transmission for the enclosing DiagnosticServiceTable. It is possible to refer to more than one diagnostic Connections in order to support more than one diagnostic tester. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=diagnosticConnection.diagnosticConnection, diagnosticConnection.variationPoint.shortLabel vh.latestBindingTime=postBuild
ecuInstance EcuInstance 0..1 ref This represents the applicable EcuInstance for this DiagnosticServiceTable. Stereotypes: atpSplitable Tags: atp.Splitkey=ecuInstance
protocolKind NameToken 0..1 attr This identifies the applicable protocol.
serviceInstance DiagnosticService Instance * ref This represents the collection of DiagnosticService Instances to be considered in the scope of this Diagnostic ServiceTable, Stereotypes: atpSplitable Tags: atp.Splitkey=serviceInstance

DiagnosticServiceTable . serviceInstance 属性的存在性:

DiagnosticServiceTable . protocolKind 属性的存在性:

属性 DiagnosticServiceTable.protocolKind 应用于在该协议的形式化定义尚未存在之前,定义 DiagnosticServiceTable 对给定协议的适用性。

换言之,该属性为 DiagnosticServiceTable 的设计者提供了表达 DiagnosticServiceTable 用途意图的手段。

而属性 DiagnosticServiceTable.protocolKind(指 DiagnosticProtocol.protocolKind)用于定义 DiagnosticProtocol 的实际性质。

通过 DiagnosticProtocol.serviceTable,这一方面的两个 “端” 被放到一起,因此对属性 protocolKind 的值表达一个约束是合理的。

DiagnosticProtocol.serviceTable 的值与 DiagnosticServiceTable.protocolKind 的对比:

该规则应在 DEXT 完成时施加。

DiagnosticServiceTable 的角色:

特别是,这意味着 DiagnosticServiceTable 描述可通过 DiagnosticConnection 获得的 DiagnosticServiceInstance 集合,DiagnosticConnection 最终是一个将诊断服务寻址到 ECU 的请求消息,以及 ECU 用于响应该服务的响应消息。

表4.20:DiagnosticConnection(DiagnosticConnection)

| 包 | M2::AUTOSARTemplates::SystemTemplate::DiagnosticConnection | | 说明 | DiagnosticConncection that is used to describe the relationship between several TP connections. Tags: atp.recommendedPackage=DiagnosticConnections | | 基类 | ARElement , ARObject , CollectableElement , Identifiable , MultilanguageReferrable , Packageable Element , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
functional Request TpConnectionIdent * ref Reference to functional request messages.

表4.21:DiagnosticConnection(DiagnosticConnection)

属性 类型 多重性 种类 备注
periodic ResponseUudt PduTriggering * ref Reference to UUDT responses.
physical Request TpConnectionIdent 0..1 ref Reference to a physical request message.
response TpConnectionIdent 0..1 ref In the vast majority of cases a response is required. However, there are also cases where providing the response is not possible and/or not allowed.
responseOn Event TpConnectionIdent 0..1 ref Reference to a ROE message. Tags: atp.Status=obsolete

表4.22:TpConnectionIdent(TpConnectionIdent)

| 包 | M2::AUTOSARTemplates::SystemTemplate::DiagnosticConnection | | 说明 | This meta-class is created to add the ability to become the target of a reference to the non-Referrable Tp Connection. | | 基类 | ARObject , Referrable | | 聚合于 | TpConnection .ident |

例 4.2 展示了一个 DiagnosticServiceTable 的示例性定义。

DiagnosticServiceTable 与一个或多个 DiagnosticConnection 之间的关系:

  • 通过引用 DiagnosticServiceTable.diagnosticConnection。这种方式不考虑协议的概念及其相互之间的优先级。

  • 通过引用 DiagnosticProtocol.diagnosticConnection 和 DiagnosticProtocol.serviceTable。这种方式明确考虑了多个协议及其优先级的存在。

请注意,[TPS_DEXT_01091] 中提到的替代方案在实际项目中可能作为替代方案处理,也可能不作为。有可能在第一个建模步骤中协议被完全忽略,因此相应的关系通过 DiagnosticServiceTable.diagnosticConnection 创建。

随着时间推移和项目的进展,协议可能变得重要,因而被引入模型。为响应这一变化,所讨论的关系现在通过引用 DiagnosticProtocol.diagnosticConnection 和 DiagnosticProtocol.serviceTable 创建。

然而,通过引用 DiagnosticServiceTable.diagnosticConnection 创建的已有关系不一定必须删除。它完全可以继续存在。但在这种情况下,适用 [constr_1406] 中描述的明显一致性规则。

DiagnosticServiceTable.diagnosticConnection 与 DiagnosticProtocol.diagnosticConnection 的对比:

  • 引用 DiagnosticServiceTable.diagnosticConnection 存在

  • 该 DiagnosticServiceTable 通过 DiagnosticProtocol.serviceTable 被引用

则通过 DiagnosticServiceTable.diagnosticConnection 引用的所有 DiagnosticConnection 也应在角色 diagnosticConnection 中被一个 DiagnosticProtocol 引用,而该 DiagnosticProtocol 又在角色 DiagnosticProtocol.serviceTable 中引用相应的 DiagnosticServiceTable。

该规则应在 DEXT 完成时施加。

4.2.10. 诊断公共属性

DiagnosticExtract 的公共属性:

DiagnosticContributionSet 定义公共诊断属性的应用范围:

DiagnosticCommonProps . defaultEndianness 属性的存在性:

  • DiagnosticCommonProps.defaultEndianness 存在。

  • 对于在 DiagnosticContributionSet 上下文中定义的所有 DiagnosticParameter,属性 DiagnosticParameter.dataElement.swDataDefProps.baseType.baseTypeDefinition.baseTypeEncoding 存在。

DiagnosticCommonProps . resetConfirmedBitOnOverflow 属性的存在性:

DiagnosticCommonProps . occurrenceCounterProcessing 属性的存在性:

元类 DiagnosticCommonProps 的以下原始属性是可选的:

  • maxNumberOfRequestCorrectlyReceivedResponsePending

  • responseOnAllRequestSids

  • responseOnSecondDeclinedRequest

DiagnosticCommonProps . eventCombinationReportingBehavior 属性的存在性:

如果缺失,则未规定报告顺序。该规则应在 DEXT 完成时施加。

表4.23:DiagnosticCommonProps(DiagnosticCommonProps)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticCommonProps | | 说明 | This meta-class aggregates a number of common properties that are shared among a diagnostic extract. Tags: vh.latestBindingTime=codeGenerationTime | | 基类 | ARObject | | 聚合于 | DiagnosticContributionSet.commonProperties |

属性 类型 多重性 种类 备注
authentication Timeout TimeValue 0..1 attr This attribute defines the time (in seconds) that the authentication state is maintained in default-session if there is no communication from the authenticated client.

表4.24:DiagnosticCommonProps(DiagnosticCommonProps)

属性 类型 多重性 种类 备注
debounce AlgorithmProps DiagnosticDebounce AlgorithmProps * aggr Defines the used debounce algorithms relevant in the context of the enclosing DiagnosticCommonProps. Usually, there is a variety of debouncing algorithms to take into account and therefore the multiplicity of this aggregation is set to 0..*.
default Endianness ByteOrderEnum 0..1 attr Defines the default endianness of the data belonging to a DID or RID which is applicable if the DiagnosticData Element does not define the endianness via the swData DefProps.baseType attribute.
event Combination Reporting Behavior DiagnosticEvent CombinationReporting BehaviorEnum 0..1 attr In case of EventCombination on Retrieval, this attribute specifies if a specific order of reporting is to be maintained.
maxNumberOf Request Correctly Received Response Pending PositiveInteger 0..1 attr Maximum number of negative responses with response code 0x78 (requestCorrectlyReceived-ResponsePending) allowed per request. DCM will send a negative response with response code 0x10 (generalReject), in case the limit value gets reached. Value 0xFF means that no limit number of NRC 0x78 response apply.
occurrence Counter Processing DiagnosticOccurrence CounterProcessing Enum 0..1 attr This attribute defines the consideration of the fault confirmation process for the occurrence counter.
resetConfirmed BitOnOverflow Boolean 0..1 attr This attribute defines, whether the confirmed bit is reset or not while an event memory entry will be displaced.
resetPendingBit OnOverflow Boolean 0..1 attr This attribute defines, whether the pending bit is reset or not while an event memory entry will be displaced. In order to be compliant to ISO 14229-1 [1], this parameter needs to be set to "false".
responseOnAll RequestSids Boolean 0..1 attr If set to FALSE the DCM will not respond to diagnostic request that contains a service ID which is in the range from 0x40 to 0x7F or in the range from 0xC0 to 0xFF (Response IDs).
responseOn Second Declined Request Boolean 0..1 attr Defines the reaction upon a second request (ClientB) that can not be processed (e.g. due to priority assessment). TRUE: when the second request (Client B) can not be processed, it shall be answered with NRC21 BusyRepeat Request. FALSE: when the second request (Client B) can not be processed, it shall not be responded.
typeOfEvent Combination Supported DiagnosticEvent CombinationBehavior Enum 0..1 attr Select type of Event Combination support.

the attribute DiagnosticCommonProps . resetPendingBitOnOverflow 的存在性:

| Enumeration | DiagnosticOccurrenceCounterProcessingEnum |

| Package | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticCommonProps | | Note | The occurrence counter triggering types. | | Aggregated by | DiagnosticCommonProps.occurrenceCounterProcessing | | Literal | Description | | Enumeration | DiagnosticOccurrenceCounterProcessingEnum | | confirmedDtcBit | The occurrence counter is incremented when TestFailed bit transitions from 0 to 1 if the fault confirmation was successful (ConfirmedDTC bit is already set). Tags: atp.EnumerationLiteralIndex=0 | | testFailedBit | The occurrence counter is incremented when TestFailed bit transitions from 0 to 1 (and the fault confirmation is not considered). Tags: atp.EnumerationLiteralIndex=1 |

| Enumeration | DiagnosticTypeOfDtcSupportedEnum |

| Package | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticTroubleCode | | Note | Supported Dtc Types | | Aggregated by | DiagnosticMemoryDestinationPrimary.typeOfDtcSupported | | Literal | Description | | iso11992_4 | ISO11992-4 DTC format Tags: atp.EnumerationLiteralIndex=0 xml.name=ISO-11992-4 | | iso14229_1 | ISO14229-1 DTC format (3 byte format) Tags: atp.EnumerationLiteralIndex=1 xml.name=ISO-14229-1 | | iso15031_6 | ISO15031-6 DTC format (2 byte format) Tags: atp.EnumerationLiteralIndex=2 xml.name=ISO-15031-6 | | saeJ1939_73 | SAEJ1939-73 DTC format Tags: atp.EnumerationLiteralIndex=3 xml.name=SAE-J-1939-73 | | saeJ2012_da | SAE_J2012-DA_DTCFormat_00 (3 byte format) Tags: atp.EnumerationLiteralIndex=4 xml.name=SAE-J-2012-DA |

| Enumeration | ByteOrderEnum |

| Package | M2::AUTOSARTemplates::GenericStructure::GeneralTemplateClasses::PrimitiveTypes | | Note | When more than one byte is stored in the memory the order of those bytes may differ depending on the architecture of the processing unit. If the least significant byte is stored at the lowest address, this architecture is called little endian and otherwise it is called big endian. ByteOrder is very important in case of communication between different PUs or ECUs. | | Aggregated by | ApSomeipTransformationProps.byteOrder, BaseTypeDirectDefinition.byteOrder, DiagnosticCommon Props.defaultEndianness, ISignalToIPduMapping.packingByteOrder, MultiplexedIPdu.selectorField ByteOrder, PduToFrameMapping.packingByteOrder, SegmentPosition.segmentByteOrder, SOMEIP TransformationDescription.byteOrder, System.containerIPduHeaderByteOrder | | Literal | Description | | Enumeration | ByteOrderEnum | | mostSignificantByte First | Most significant byte shall come at the lowest address (also known as BigEndian or as Motorola-Format) Tags: atp.EnumerationLiteralIndex=0 | | mostSignificantByte Last | Most significant byte shall come highest address (also known as LittleEndian or as Intel-Format) Tags: atp.EnumerationLiteralIndex=1 | | opaque | For opaque data endianness conversion has to be configured to Opaque. See AUTOSAR COM Specification for more details. Tags: atp.EnumerationLiteralIndex=2 |

| Enumeration | DiagnosticEventCombinationBehaviorEnum |

| Package | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticCommonProps | | Note | Select type of Event Combination support | | Aggregated by | DiagnosticCommonProps.typeOfEventCombinationSupported | | Literal | Description | | eventCombination OnRetrieval | Event combination on retrieval is used to combine events. For each event an individual event memory entry is created, while reporting the data via UDS, the data is combined. Tags: atp.EnumerationLiteralIndex=1 | | eventCombination OnStorage | Event combination on storage is used to combine events. Only one memory entry exists for each DTC which is also reported via UDS. Tags: atp.EnumerationLiteralIndex=0 |

| Enumeration | DiagnosticEventCombinationReportingBehaviorEnum |

| Package | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticCommonProps | | Note | Select reporting format of events. Applicable only for Event Combination on Retrieval. | | Aggregated by | DiagnosticCommonProps.eventCombinationReportingBehavior | | Literal | Description | | reportingIn ChronlogicalOrder OldestFirst | The reporting order for event combination on retrieval is the chronological storage order of the events Tags: atp.EnumerationLiteralIndex=0 |

4.3. 诊断服务

4.3.1. 简介

AUTOSAR 诊断服务的元模型在很大程度上承接了 ISO 14229 [17] 的统一诊断服务(UDS)定义所描述的诊断服务的各个方面。

4.3.2. 诊断服务实例与诊断服务类

在诊断服务方面,元模型区分诊断服务实例与诊断服务类两个概念。

正如术语所暗示的,诊断服务实例(形式化为 DiagnosticServiceInstance)实现给定上下文中诊断服务的一次具体使用,而诊断服务类(形式化为 DiagnosticServiceClass)的目的是提供模型中所有现存诊断服务实例共享的属性。

concrete sub-classes of DiagnosticServiceClass in the context created by a DiagnosticContributionSet 的存在性:

  • DiagnosticServiceClass 的子类(DiagnosticCustomServiceClass 除外)在由 DiagnosticContributionSet 创建的上下文中应只出现一次。

  • 具有给定 customServiceId 属性值的 DiagnosticCustomServiceClass 在由 DiagnosticContributionSet 创建的上下文中应只出现一次。

  • 如果 DiagnosticServiceClass 的子类(DiagnosticCustomServiceClass 除外)在由 DiagnosticContributionSet 创建的上下文中出现多次,则 DiagnosticServiceClass 该子类的所有实例的所有属性值都应相同。

对于聚合,被聚合元素的数量应相同,且被聚合元素的原始属性值也应相同。

该规则应在 DEXT 完成时施加。

这意味着 DiagnosticCustomServiceClass 的多个实例可以存在于 DiagnosticContributionSet 的上下文中,只要 DiagnosticCustomServiceClass 的所有出现的 customServiceId 属性值彼此不同。

[constr_1329] 的背景显然与 DiagnosticServiceClass 的语义有关,即定义在所有 DiagnosticServiceInstance 之间共享的模型属性。

如果存在不止一个属性值集合彼此分歧的 DiagnosticServiceClass,这将是不可能的。

表4.25:DiagnosticServiceClass(DiagnosticServiceClass)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::CommonService | | 说明 | This meta-class provides the ability to define common properties that are shared among all instances of sub-classes of DiagnosticServiceInstance. | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 子类 | DiagnosticAuthenticationClass, DiagnosticClearDiagnosticInformationClass, DiagnosticClearReset EmissionRelatedInfoClass, DiagnosticComControlClass, DiagnosticControlDTCSettingClass, Diagnostic CustomServiceClass, DiagnosticDataTransferClass, DiagnosticDynamicallyDefineDataIdentifierClass, DiagnosticEcuResetClass, DiagnosticIoControlClass, DiagnosticReadDTCInformationClass, Diagnostic ReadDataByIdentifierClass, DiagnosticReadDataByPeriodicIDClass, DiagnosticReadMemoryByAddress Class, DiagnosticReadScalingDataByIdentifierClass, DiagnosticRequestControlOfOnBoardDeviceClass, DiagnosticRequestCurrentPowertrainDataClass, DiagnosticRequestDownloadClass, DiagnosticRequest EmissionRelatedDTCClass, DiagnosticRequestEmissionRelatedDTCPermanentStatusClass, Diagnostic RequestFileTransferClass, DiagnosticRequestOnBoardMonitoringTestResultsClass, DiagnosticRequest PowertrainFreezeFrameDataClass, DiagnosticRequestUploadClass, DiagnosticRequestVehicleInfo Class, DiagnosticResponseOnEventClass, DiagnosticRoutineControlClass, DiagnosticSecurityAccess Class, DiagnosticSessionControlClass, DiagnosticTransferExitClass, DiagnosticWriteDataByIdentifier Class, DiagnosticWriteMemoryByAddressClass | | 聚合于 | ARPackage.element |

表4.26:DiagnosticServiceClass(DiagnosticServiceClass)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::CommonService | | 说明 | This represents a concrete instance of a diagnostic service. | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 子类 | DiagnosticAuthentication , DiagnosticClearDiagnosticInformation, DiagnosticClearResetEmissionRelated Info, DiagnosticComControl, DiagnosticControlDTCSetting, DiagnosticCustomServiceInstance, DiagnosticDataByIdentifier , DiagnosticDynamicallyDefineDataIdentifier, DiagnosticEcuReset, Diagnostic IOControl, DiagnosticMemoryByAddress , DiagnosticReadDTCInformation, DiagnosticReadDataBy PeriodicID, DiagnosticRequestControlOfOnBoardDevice, DiagnosticRequestCurrentPowertrainData, DiagnosticRequestEmissionRelatedDTC, DiagnosticRequestEmissionRelatedDTCPermanentStatus, DiagnosticRequestFileTransfer, DiagnosticRequestOnBoardMonitoringTestResults, DiagnosticRequest PowertrainFreezeFrameData, DiagnosticRequestVehicleInfo, DiagnosticResponseOnEvent, Diagnostic RoutineControl, DiagnosticSecurityAccess, DiagnosticSessionControl | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
access Permission DiagnosticAccess Permission 0..1 ref This represents the collection of DiagnosticAccess Permissions that allow for the execution of the referencing DiagnosticServiceInstance.. Stereotypes: atpSplitable Tags: atp.Splitkey=accessPermission

表4.27:DiagnosticServiceInstance(DiagnosticServiceInstance)

属性 类型 多重性 种类 备注
serviceClass DiagnosticServiceClass 0..1 ref This represents the corresponding "class", i.e. this meta-class provides properties that are shared among all instances of applicable sub-classes of DiagnosticService Instance. The subclasses that affected by this pattern implement references to the applicable "class"-role that substantiate this abstract reference. Stereotypes: atpAbstract

DiagnosticServiceInstance . serviceClass 的存在性:

除非存在针对 DiagnosticServiceInstance 和 DiagnosticServiceClass 匹配子类的特定组合的规则,否则本规则适用。

对自定义服务实例的支持:

自定义服务显然无法使用标准化属性进行配置,但为此可以在 adminData 的上下文中使用 Sdg。

不要求给定的工具能够正确处理自定义服务实例的定义。

表4.28:DiagnosticCustomServiceInstance(DiagnosticCustomServiceInstance)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::CustomServiceInstance | | 说明 | This meta-class has the ability to define an instance of a custom diagnostic service. Tags: atp.recommendedPackage=DiagnosticCustomInstances | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceInstance , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
customService Class DiagnosticCustom ServiceClass 0..1 ref Reference to the corresponding DiagnosticCustom ServiceClass.

表4.29:DiagnosticCustomServiceClass(DiagnosticCustomServiceClass)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::CommonService | | 说明 | This represents the ability to define a custom diagnostic service class and assign an ID to it. Further configuration is not foreseen from the point of view of the diagnostic extract and consequently needs to be done on the level of ECUC. Tags: atp.recommendedPackage=DiagnosticCustomServiceClasses | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceClass , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
customService Id PositiveInteger 0..1 attr This attribute may only be used for the definition of custom services. The values shall not overlap with existing standardized service IDs.

自定义服务标识符不应与标准化服务标识符重叠:

该规则应在 DEXT 完成时施加。

4.3.3. 诊断访问权限

本章讨论在 Dcm 上下文中使用的访问权限的概念。

来自 DiagnosticAccessPermission 的引用的语义:

  • 角色 diagnosticSession 中的 DiagnosticSession。

  • 角色 securityLevel 中的 DiagnosticSecurityLevel。

  • 角色 environmentalCondition 中的 DiagnosticEnvironmentalCondition。

  • 角色 authenticationEnabled 中的 DiagnosticAuthRoleProxy。

关于访问权限如何授予,属于 Dcm 规范 [11] 的范畴。

从 DiagnosticAccessPermission 引用的模型元素的语义在本文档的以下各节中描述:

  • DiagnosticSession 在第 4.3.4 节描述。

  • DiagnosticSecurityLevel 在第 4.3.5 节描述。

  • DiagnosticAuthRoleProxy 在第 4.3.6 节描述。

  • DiagnosticEnvironmentalCondition 在第 4.3.7 节描述。

DiagnosticAccessPermission 用于描述(或不描述)执行诊断服务的能力,取决于被引用的 DiagnosticSecurityLevel 和 DiagnosticSession(见图 4.12)。

以文本半形式化表述的、关于 DiagnosticAccessPermission 有效性的前置条件和运行条件的描述:

这可以通过属性 DiagnosticAccessPermission.introduction.structuredReq 完成。

关于半形式化文本建模的更多细节请参见图 4.4。

ARXML 中前置条件和运行条件定义的示例勾勒于清单 B.9。

为使该方法可行,重要的是将属性 category 的可能取值标准化,使得前置条件和运行条件定义的半形式化语义受 AUTOSAR 标准的规定的保护。

DiagnosticAccessPermission.introduction.structuredReq 的标准化值:

  • DIAG_ACCESS_PERM_PRE_COND:该值描述相应 DiagnosticAccessPermission 的前置条件。

  • DIAG_ACCESS_PERM_RUN_COND:该值描述相应 DiagnosticAccessPermission 的运行条件。

按照 [TPS_DEXT_01071] 应用标准化值的示例见第 B.5 节。

表4.30:DiagnosticAccessPermission(DiagnosticAccessPermission)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm | | 说明 | This represents the specification of whether a given service can be accessed according to the existence of meta-classes referenced by a particular DiagnosticAccessPermission. In other words, this meta-class acts as a mapping element between several (otherwise unrelated) pieces of information that are put into context for the purpose of checking for access rights. Tags: atp.recommendedPackage=DiagnosticAccessPermissions | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
authentication Enabled DiagnosticAuthRole Proxy 0..1 aggr The existence of this aggregation indicates that an authentication is foreseen. The details are clarified by the aggregated class. Stereotypes: atpSplitable Tags: atp.Splitkey=authenticationEnabled
diagnostic Session DiagnosticSession * ref This represents the associated DiagnosticSessions Stereotypes: atpSplitable Tags: atp.Splitkey=diagnosticSession
environmental Condition Diagnostic EnvironmentalCondition 0..1 ref This represents the environmental conditions associated with the access permission. Stereotypes: atpSplitable Tags: atp.Splitkey=environmentalCondition
securityLevel DiagnosticSecurityLevel * ref This represents the associated DiagnosticSecurityLevels Stereotypes: atpSplitable Tags: atp.Splitkey=securityLevel

表4.31:DiagnosticAccessPermission(DiagnosticAccessPermission)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm | | 说明 | This meta-class represents the ability to define a diagnostic session. Tags: atp.recommendedPackage=DiagnosticSessions | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
id PositiveInteger 0..1 attr This is the numerical identifier used to identify the DiagnosticSession in the scope of diagnostic workflow
jumpToBoot Loader DiagnosticJumpToBoot LoaderEnum 0..1 attr This attribute represents the ability to define whether this diagnostic session allows to jump to Bootloader (OEM Bootloader or System Supplier Bootloader). If this diagnostic session doesn't allow to jump to Bootloader the value JumpToBootLoaderEnum.noBoot shall be chosen.

表4.32:DiagnosticSession(DiagnosticSession)

属性 类型 多重性 种类 备注
p2ServerMax TimeValue 0..1 attr This is the session value for P2ServerMax in seconds (per Session Control). The AUTOSAR configuration standard is to use SI units, so this parameter is defined as a float value in seconds.
p2StarServer Max TimeValue 0..1 attr This is the session value for P2*ServerMax in seconds (per Session Control). The AUTOSAR configuration standard is to use SI units, so this parameter is defined as a float value in seconds.

| Enumeration | DiagnosticJumpToBootLoaderEnum |

| Package | M2::AUTOSARTemplates::DiagnosticExtract::Dcm | | Note | This enumeration contains the options for jumping to a boot loader. | | Aggregated by | DiagnosticSession.jumpToBootLoader | | Literal | Description | | noBoot | This diagnostic session doesn't allow to jump to Bootloader. Tags: atp.EnumerationLiteralIndex=0 | | oemBoot | This diagnostic session allows to jump to OEM Bootloader. In this case the bootloader send the final response. Tags: atp.EnumerationLiteralIndex=1 | | oemBootRespApp | This diagnostic session allows to jump to OEM Bootloader and application sends final response. Tags: atp.EnumerationLiteralIndex=3 | | systemSupplierBoot | This diagnostic session allows to jump to System Supplier Bootloader. In this case the bootloader send the final response. Tags: atp.EnumerationLiteralIndex=2 | | systemSupplierBoot RespApp | This diagnostic session allows to jump to System Supplier Bootloader and application sends final response. Tags: atp.EnumerationLiteralIndex=4 |

4.3.4. 诊断会话

在运行时,DiagnosticSession 用于为诊断功能的执行创建上下文。服务器通常支持多种不同的 DiagnosticSession。可以在运行时在 DiagnosticSession 之间切换。

DiagnosticSession.id 的语义:

0x01:这表示默认会话。该会话在诊断通信的上下文中具有特定语义,例如应在默认会话中执行的任何诊断服务不能要求对 DiagnosticSecurityLevel 的任何引用。

0x02:这表示编程会话。

0x03:这表示扩展诊断会话。

0x04:这表示安全系统诊断会话。

0x40..0x5F:该值范围保留给主机厂特定用途。

0x60..0x7E:该值范围保留给供应商特定用途。

4.3.5. 诊断安全级别

DiagnosticAccessPermission.securityLevel 多重性建模的依据:

  • 属性 DiagnosticSession.id 设置为 0x01 的 DiagnosticSession 不应与 DiagnosticSecurityLevel 关联。

  • 不需要关联的 DiagnosticSecurityLevel。因此,引用给定 DiagnosticAccessPermission 的 DiagnosticServiceInstance 的执行总是可能的。

表4.33:DiagnosticSecurityLevel(DiagnosticSecurityLevel)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm | | 说明 | This meta-class represents the ability to define a security level considered for diagnostic purposes. Tags: atp.recommendedPackage=DiagnosticSecurityLevels | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
accessData RecordSize PositiveInteger 0..1 attr This represents the size of the AccessDataRecord used in GetSeed. Unit:byte.
keySize PositiveInteger 0..1 attr This represents the size of the security key. Unit: byte.
numFailed SecurityAccess PositiveInteger 0..1 attr This represents the number of failed security accesses after which the delay time is activated.
securityDelay Time TimeValue 0..1 attr This represents the delay time after a failed security access. Unit: second.
seedSize PositiveInteger 0..1 attr This represents the size of the security seed. Unit: byte.

DiagnosticSecurityLevel.accessDataRecordSize 的值:

4.3.6. 诊断认证

属性 DiagnosticAccessPermission.authenticationEnabled 不存在:

表4.34:DiagnosticAuthRoleProxy(DiagnosticAuthRoleProxy)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm | | 说明 | This meta-class indicates that an authentication is generally foreseen. The question whether the authentication is done in general or whether it is done role-specific depends on the existence of references to DiagAuthRole. | | 基类 | ARObject | | 聚合于 | DiagnosticAccessPermission.authenticationEnabled |

属性 类型 多重性 种类 备注
authentication Role DiagnosticAuthRole * ref This reference identifies the authenticationRole applicable for the enclosing DiagnosticAccessPermission.

属性 DiagnosticAccessPermission.authenticationEnabled 存在:

[TPS_DEXT_01189] 中提到的进一步检查的具体性质由 [TPS_DEXT_01190] 和 [TPS_DEXT_01191] 定义。

存在这样的用例:诊断服务应显式地不具有任何认证角色,相应服务只能通过证书的动态访问列表访问。

属性 DiagnosticAccessPermission.authenticationEnabled 存在,但 DiagnosticAuthRoleProxy.authenticationRole 不存在:

存在诊断服务应受特定认证角色支配的用例。

属性 DiagnosticAccessPermission.authenticationEnabled 和 DiagnosticAuthRoleProxy.authenticationRole 存在:

DiagnosticAuthRole 的语义:

特别是,它支持不同角色的存在以及向这些角色中的任何一个指派不同的权限(例如访问给定的 DiagnosticDataIdentifier)。

权限以与给定角色关联的位域的形式定义。换言之,这一 “角色和权限” 概念的实现是一个位域与一个文本标签(描述该角色)关联。

表4.35:DiagnosticAuthRole(DiagnosticAuthRole)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm | | 说明 | This meta-class represents the ability to specify an authentication role that can be used to deliver fine-grained access rights. Tags: atp.recommendedPackage=DiagnosticAuthRoles | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
bitPosition PositiveInteger 0..1 attr This attribute allows for the specification of the position of the enclosing role in a bitfield of roles.
isDefault Boolean 0..1 attr This attribute indicates whether the enclosing role is considered a default role.

请注意,DiagnosticAuthRole.bitPosition 的值参与 “角色和权限” 矩阵的 “规范性” 定义。该矩阵通常由每个 OEM 单独定义,并适用于该 OEM 组织中的所有项目。

DiagnosticAuthRole 的模型关系描绘于图 4.12。

| | Development |

| Bit | 7 | | Certificate | 0 | | Service List | | | Service 0x28 | 0 | | Service 0x11 01 | 0 | | RID 0x5678 | 0 |

这样一个矩阵的示例勾勒于图 4.13。更多信息请参见文档 SWS Diagnostic Communication Manager [11]。

DiagnosticAccessPermission.authenticationEnabled 使用的限制:

  • DiagnosticRequestCurrentPowertrainData

  • DiagnosticRequestPowertrainFreezeFrameData

  • DiagnosticRequestEmissionRelatedDTC

  • DiagnosticClearResetEmissionRelatedInfo

  • DiagnosticRequestOnBoardMonitoringTestResults

  • DiagnosticRequestControlOfOnBoardDevice

  • DiagnosticRequestVehicleInfo

  • DiagnosticRequestEmissionRelatedDTCPermanentStatus

  • DiagnosticAuthentication 的子类

该规则应在 DEXT 完成时施加。

4.3.7. 诊断环境条件

在某些情况下,只有当车辆处于允许相应诊断功能的(安全)状态时,诊断功能才能执行。例如,其中一个条件是车辆不在行驶,即车速 == 0。

元类 DiagnosticEnvironmentalCondition 将如下想法形式化:一个条件在 ECU 运行期间通过查看 “环境” 状态(如上述车速)来求值。

DiagnosticEnvironmentalCondition 基于应用软件或基础软件中的活动模式,或通过将 DiagnosticDataElement 与常量值比较。原子条件可以通过逻辑运算组合成更复杂的条件。

请注意,可以创建(任意深度的)DiagnosticEnvConditionFormula 嵌套层级。这一建模得到以下事实的支持:DiagnosticEnvConditionFormula 继承自并同时聚合 DiagnosticEnvConditionFormulaPart。

表4.36:DiagnosticEnvironmentalCondition(DiagnosticEnvironmentalCondition)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::EnvironmentalCondition | | 说明 | The meta-class DiagnosticEnvironmentalCondition formalizes the idea of a condition which is evaluated during runtime of the ECU by looking at "environmental" states (e.g. one such condition is that the vehicle is not driving, i.e. vehicle speed == 0). Tags: atp.recommendedPackage=DiagnosticEnvironmentalConditions | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
formula DiagnosticEnvCondition Formula 0..1 aggr This attribute represents the formula part of the DiagnosticEnvironmentalCondition.
modeElement DiagnosticEnvMode Element * aggr This aggregation contains a representation of Mode Declarations in the context of a DiagnosticEnvironmental Condition.

DiagnosticEnvironmentalCondition . formula 的存在性:

4.3.7.1. 环境条件公式

DiagnosticEnvironmentalCondition 的核心部分是 DiagnosticEnvConditionFormula。

DiagnosticEnvConditionFormula 的求值:

在运行时求值,以确定 DiagnosticEnvironmentalCondition 当前是否存在(即公式求值为 true)或不存在(否则)。

DiagnosticEnvConditionFormula 本身由若干 part 组成,它们由属性 op 所表示的逻辑运算组合。

表4.37:DiagnosticEnvConditionFormula(DiagnosticEnvConditionFormula)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::EnvironmentalCondition | | 说明 | A DiagnosticEnvConditionFormula embodies the computation instruction that is to be evaluated at runtime to determine if the DiagnosticEnvironmentalCondition is currently present (i.e. the formula is evaluated to true) or not (otherwise). The formula itself consists of parts which are combined by the logical operations specified by DiagnosticEnvConditionFormula.op. If a diagnostic functionality cannot be executed because an environmental condition fails then the diagnostic stack shall send a negative response code (NRC) back to the client. The value of the NRC is directly related to the specific formula and is therefore formalized in the attribute DiagnosticEnvCondition Formula.nrcValue. | | 基类 | ARObject , DiagnosticEnvConditionFormulaPart | | 聚合于 | DiagnosticEnvConditionFormula.part, DiagnosticEnvironmentalCondition.formula |

属性 类型 多重性 种类 备注
nrcValue PositiveInteger 0..1 attr This attribute represents the concrete NRC value that shall be returned if the condition fails.
op DiagnosticLogical OperatorEnum 0..1 attr This attribute represents the concrete operator (supported operators: and, or) of the condition formula.
part (ordered) DiagnosticEnvCondition FormulaPart * aggr This aggregation represents the collection of formula parts that can be combined by logical operators.

DiagnosticEnvConditionFormula . op 的存在性:

| Enumeration | DiagnosticLogicalOperatorEnum |

| Package | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::EnvironmentalCondition | | Note | Logical AND and OR operation (&&, ||) | | Aggregated by | DiagnosticEnvConditionFormula.op | | Literal | Description | | logicalAnd | Logical AND Tags: atp.EnumerationLiteralIndex=0 | | logicalOr | Logical OR Tags: atp.EnumerationLiteralIndex=1 |

表4.38:DiagnosticLogicalOperatorEnum(DiagnosticLogicalOperatorEnum)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::EnvironmentalCondition | | 说明 | A DiagnosticEnvConditionFormulaPart can either be a atomic condition, e.g. a DiagnosticEnvCompare Condition, or a DiagnosticEnvConditionFormula, again, which allows arbitrary nesting. | | 基类 | ARObject | | 子类 | DiagnosticEnvCompareCondition , DiagnosticEnvConditionFormula |

表4.39:DiagnosticEnvConditionFormulaPart(DiagnosticEnvConditionFormulaPart)

| 聚合于 | DiagnosticEnvConditionFormula.part |

没有任何 part 的 DiagnosticEnvConditionFormula:

具有一个 part 的 DiagnosticEnvConditionFormula:

具有多于一个 part 的 DiagnosticEnvConditionFormula:

求值应以 “短路” 方式进行,即遵循 C 语言中逻辑运算符的求值规则。

这种方法的后果是:

  • part 应从第一个元素开始按规定的顺序求值。这就是 part 的聚合用 ordered 限定符修饰的原因。

  • 在每个 part 求值之后,应执行一次检查:剩余 part 的求值(为 true 或 false)是否仍可能改变整体结果。

  • 一旦整体结果的变化不再可能,即以下任一条件求值为 false:

  • 没有剩余的 part;

  • 当前 part 求值为 false 且 DiagnosticEnvConditionFormula.op == DiagnosticLogicalOperatorEnum.logicalAnd;

  • 当前 part 求值为 true 且 DiagnosticEnvConditionFormula.op == DiagnosticLogicalOperatorEnum.logicalOr。

则 part 的求值应终止,当前 part 的求值结果应被视为公式的整体求值结果。

关于返回 NRC 值的策略,请参见 SWS Dcm 规范 [11]。

DiagnosticEnvConditionFormula.nrcValue 的语义:

如果未定义 NRC 的值,则将回送 SWS Dcm [11] 中定义的预定义 NRC 值。NRC 的值与特定的 DiagnosticEnvConditionFormula 直接相关,因此在属性 DiagnosticEnvConditionFormula.nrcValue 中形式化。

DiagnosticEnvConditionFormula.nrcValue 的允许取值范围:

该规则应在 DEXT 完成时施加。

[constr_1464] 存在的依据由 ISO 14229-1 [17] 提供。

4.3.7.2. 原子条件

DiagnosticEnvConditionFormula 上下文中的原子条件通过元类 DiagnosticEnvCompareCondition 描述。DiagnosticEnvCompareCondition 的表述基于在运行时将某些可变数据与常量值比较的想法。

比较的实际类型(==、!=、<、<= 等)通过属性 DiagnosticEnvCompareCondition.compareType 规定。

表4.40:DiagnosticEnvCompareCondition(DiagnosticEnvCompareCondition)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::EnvironmentalCondition | | 说明 | DiagnosticCompareConditions are atomic conditions. They are based on the idea of a comparison at runtime of some variable data with something constant. The type of the comparison (==, !=, <, <=, ...) is specified in DiagnosticCompareCondition.compareType. | | 基类 | ARObject , DiagnosticEnvConditionFormulaPart | | 子类 | DiagnosticEnvDataCondition, DiagnosticEnvDataElementCondition, DiagnosticEnvModeCondition | | 聚合于 | DiagnosticEnvConditionFormula.part |

属性 类型 多重性 种类 备注
compareType DiagnosticCompare TypeEnum 0..1 attr This attributes represents the concrete type of the comparison.

DiagnosticEnvCompareCondition . compareType 的存在性:

DiagnosticEnvCompareCondition 是一个抽象元类,作为为处理不同操作数类型而设计的两个具体元类的基类。

| Enumeration | DiagnosticCompareTypeEnum |

| Package | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::EnvironmentalCondition | | Note | Enumeration for the type of a comparison of values usually expressed by the following operators: ==, !=, <, <=, >, >= | | Aggregated by | DiagnosticEnvCompareCondition .compareType | | Literal | Description | | isEqual | equal Tags: atp.EnumerationLiteralIndex=0 | | isGreaterOrEqual | greater than or equal Tags: atp.EnumerationLiteralIndex=5 | | isGreaterThan | greater than Tags: atp.EnumerationLiteralIndex=4 | | isLessOrEqual | less than or equal Tags: atp.EnumerationLiteralIndex=3 | | isLessThan | less than Tags: atp.EnumerationLiteralIndex=2 | | isNotEqual | not equal Tags: atp.EnumerationLiteralIndex=1 |

DiagnosticEnvCompareCondition 的具体子类(细节在第 4.3.7.2.1、4.3.7.2.2 和 4.3.7.2.3 节中解释)支持 DiagnosticCompareTypeEnum 的不同属性集合,用于设置属性 DiagnosticEnvCompareCondition.compareType 的值。

4.3.7.2.1. 到 DID 的数据条件

DiagnosticEnvDataCondition 的语义:

DiagnosticEnvDataCondition 上下文中 compareType 的允许值:

表4.41:DiagnosticEnvDataCondition(DiagnosticEnvDataCondition)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::EnvironmentalCondition | | 说明 | A DiagnosticEnvDataCondition is an atomic condition that compares the current value of the referenced DiagnosticDataElement with a constant value defined by the ValueSpecification. All compareTypes are supported. | | 基类 | ARObject , DiagnosticEnvCompareCondition , DiagnosticEnvConditionFormulaPart | | 聚合于 | DiagnosticEnvConditionFormula.part |

属性 类型 多重性 种类 备注
compareValue ValueSpecification 0..1 aggr This attribute represents a fixed compare value taken to evaluate the compare condition.
dataElement DiagnosticDataElement 0..1 ref This reference represents the related diagnostic data element.

DiagnosticEnvDataCondition . compareValue 的存在性:

DiagnosticEnvDataCondition . dataElement 的存在性:

4.3.7.2.2. 到应用所拥有的数据元素的数据条件

DiagnosticEnvDataElementCondition 的语义:

DiagnosticEnvDataElementCondition 在自上而下和自下而上场景中的使用:

  • 如果在创建 DiagnosticEnvDataElementCondition 时应用软件已经存在(即采用自上而下的开发过程),则可以使用角色 dataPrototype 中的引用直接标识目标 DataPrototype。

  • If the application software does not exist (i.e. a bottom-up development process is in place) at the time when the DiagnosticEnvDataElementCondition

is created, then the aggregation of SwDataDefProps in the role swDataDefProps shall exist.

在这种情况下,可以正式描述用于比较的 DataPrototype(很可能由集成者标识)的属性(baseTypeEncoding、baseTypeSize)。

表4.42:DiagnosticEnvDataElementCondition(DiagnosticEnvDataElementCondition)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::EnvironmentalCondition | | 说明 | This meta-class represents the ability to formulate a diagnostic environment condition based on the value of a data element owned by the application software. | | 基类 | ARObject , DiagnosticEnvCompareCondition , DiagnosticEnvConditionFormulaPart | | 聚合于 | DiagnosticEnvConditionFormula.part |

属性 类型 多重性 种类 备注
compareValue ValueSpecification 0..1 aggr This aggregation represents the definition of the compare value against which the value taken from the application software shall be compared.
dataPrototype DataPrototype 0..1 iref This instanceRef represent the ability to access a data element owned by the application software on the AUTOSAR classic platform. InstanceRef implemented by: DataPrototypeInSystem InstanceRef
swDataDef Props SwDataDefProps 0..1 aggr Via this aggregation it is possible to describe the properties of the data that is obtained from the application for the environmental condition. Stereotypes: atpSplitable Tags: atp.Splitkey=swDataDefProps

attributes of DiagnosticEnvDataElementCondition if the reference in the role dataPrototype exists 的存在性:

  • 角色 compareValue 中的聚合应存在,且

  • 角色 swDataDefProps 中的聚合不应存在

应在 DEXT 完成时存在。

attributes of DiagnosticEnvDataElementCondition if the reference in the role dataPrototype does not exist 的存在性:

  • compareValue 和

  • swDataDefProps

应在 DEXT 完成时存在。

attributes of DiagnosticEnvDataElementCondition . swDataDefProps 的存在性:

| Attribute of SwDataDefProps | Attribute Existence |

| baseType | 1 | | compuMethod | 0..1 | | dataConstr | 0..1 |

该规则应在 DEXT 完成时施加。

CompuMethod 和 DataConstr 对 DiagnosticEnvDataElementCondition 定义的相关性:

4.3.7.2.3. 模式条件

DiagnosticEnvModeCondition 的语义:

这一方面的具体建模勾勒于图 F.4。

请注意,在属性 DiagnosticEnvSwcModeElement.mode 的具体建模中,同时引用了 ModeDeclarationGroupPrototype 和适用的 ModeDeclaration。

这种建模方法背后的想法(更多信息请参见图 F.4)是:ModeDeclaration 本来就只能是用于为相应 ModeDeclarationGroupPrototype 定义类型的那个特定 ModeDeclarationGroup 的成员。

诚然,这种关系可以用两个引用加一个形式化约束来表达,也可以用一个暗示以特定方式解释模型的单一引用来表达。AUTOSAR 选择后者,[TPS_DEXT_01120] 对此作了详细说明。

ModeDeclarationGroupPrototype 的值与 ModeDeclaration 的比较:

  • The ModeDeclarationGroupPrototype referenced in the role DiagnosticEnvSwcModeElement . mode . contextModeDeclarationGroup shall be

compared to the ModeDeclaration referenced in the role DiagnosticEnvSwcModeElement . mode . targetMode .

  • 角色 DiagnosticEnvBswModeElement.mode.contextModeDeclarationGroup 中引用的 ModeDeclarationGroupPrototype 应与角色 DiagnosticEnvBswModeElement.mode.targetMode 中引用的 ModeDeclaration 比较。

请注意,[TPS_DEXT_01120] 中提到的两个替代方案在图 4.18 中描述。

DiagnosticEnvModeCondition 上下文中 compareType 的允许值:

  • DiagnosticCompareTypeEnum.isEqual

  • DiagnosticCompareTypeEnum.isNotEqual

该规则应在 DEXT 完成时施加。

DiagnosticEnvModeCondition 中的引用:

该规则应在 DEXT 完成时施加。

请注意,专用元类 DiagnosticEnvModeElement 存在的主要好处是保持(序列化的)模型整洁。在满足 [constr_1467] 的情况下,标识模式比较操作数的可能很长的 InstanceRef 不必(如适用时)重复,而可以在外围 DiagnosticEnvironmentalCondition 的上下文中多次复用。

表4.43:DiagnosticEnvModeCondition(DiagnosticEnvModeCondition)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::EnvironmentalCondition | | 说明 | DiagnosticEnvModeCondition are atomic condition based on the comparison of the active Mode Declaration in a ModeDeclarationGroupProtoype with the constant value of a ModeDeclaration. The formulation of this condition uses only one DiagnosticEnvElement, which contains enough information to deduce the variable part (i.e. the part that changes at runtime) as well as the constant part of the comparison. Only DiagnosticCompareTypeEnum.isEqual or DiagnosticCompareTypeEnum.isNotEqual are eligible values for DiagnosticAtomicCondition.compareType. | | 基类 | ARObject , DiagnosticEnvCompareCondition , DiagnosticEnvConditionFormulaPart | | 聚合于 | DiagnosticEnvConditionFormula.part |

表4.44:DiagnosticEnvModeCondition(DiagnosticEnvModeCondition)

属性 类型 多重性 种类 备注
modeElement DiagnosticEnvMode Element 0..1 ref This reference represents both the ModeDeclaration GroupPrototype and the ModeDeclaration relevant for the mode comparison.

DiagnosticEnvModeCondition . modeElement 的存在性:

表4.45:DiagnosticEnvModeElement(DiagnosticEnvModeElement)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::EnvironmentalCondition | | 说明 | All ModeDeclarations that are referenced in a DiagnosticEnvModeCondition shall be defined as a DiagnosticEnvModeElement of this DiagnosticEnvironmentalCondition. This concept keeps the ARXML clean: It avoids that the DiagnosticEnvConditionFormula is cluttered by lengthy InstanceRef definitions. Furthermore, it allows that an InstanceRef only needs to be defined once and can be used multiple times in the different DiagnosticEnvModeConditions. | | 基类 | ARObject , Referrable | | 子类 | DiagnosticEnvBswModeElement, DiagnosticEnvSwcModeElement | | 聚合于 | DiagnosticEnvironmentalCondition.modeElement |

表4.46:DiagnosticEnvSwcModeElement(DiagnosticEnvSwcModeElement)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::EnvironmentalCondition | | 说明 | This meta-class represents the ability to refer to a ModeDeclaration in a concrete System context. | | 基类 | ARObject , DiagnosticEnvModeElement , Referrable | | 聚合于 | DiagnosticEnvironmentalCondition.modeElement |

属性 类型 多重性 种类 备注
mode ModeDeclaration 0..1 iref This reference identifies both the ModeDeclarationGroup Prototype and the ModeDeclaration for the specific mode comparison. InstanceRef implemented by: PModeInSystemInstance Ref

DiagnosticEnvSwcModeElement . mode 的存在性:

表4.47:DiagnosticEnvBswModeElement(DiagnosticEnvBswModeElement)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::EnvironmentalCondition | | 说明 | This meta-class represents the ability to refer to a specific ModeDeclaration in the scope of a BswModule Description. | | 基类 | ARObject , DiagnosticEnvModeElement , Referrable | | 聚合于 | DiagnosticEnvironmentalCondition.modeElement |

属性 类型 多重性 种类 备注
mode ModeDeclaration 0..1 iref This reference identifies both the ModeDeclarationGroup Prototype and the ModeDeclaration for the specific mode comparison. InstanceRef implemented by: ModeInBswModule DescriptionInstanceRef

DiagnosticEnvBswModeElement . mode 的存在性:

4.3.8. AUTOSAR 支持的诊断服务

以下子章描述 ISO 14229-1 [17] 中定义的相关诊断服务集合的建模。这意味着 AUTOSAR DiagnosticExtract 的定义不显式支持 [17] 所定义的全部诊断服务集合。

本文档范围内支持的诊断服务:

| ID | Service |

| 0x10 | SessionControl | | 0x11 | EcuReset | | 0x14 | ClearDiagnosticInformation | | 0x19 | ClearDTCInformation | | 0x22 | ReadDataByIdentifier | | 0x23 | ReadMemoryByAddress | | 0x27 | SecurityAccess | | 0x28 | CommunicationControl | | 0x29 | Authentication | | 0x2A | ReadDataByPeriodicIdentifier | | 0x2C | DynamicallyDefineDataIdentifier | | 0x2E | WriteDataByIdentifier | | 0x2F | IOControl | | 0x31 | RoutineControl | | 0x34 | RequestDownload | | ID | Service | | 0x35 | RequestUpload | | 0x36 | TransferData | | 0x37 | RequestTransferExit | | 0x3D | WriteMemoryByAddress | | 0x85 | ControlDTCSetting | | 0x86 | ResponseOnEvent |

本文档汇编的一些诊断服务定义了所谓的子功能,需要标识这些子功能才能完整规定相应诊断服务的性质。

通过属性 DiagnosticServiceInstance.category 规定子功能:

在诊断服务按照 ISO 14229-1 [17] 定义子功能的所有情况下,可以使用 DiagnosticServiceInstance 适用子类的属性 category 的值,以文本记号的形式规定适用的子功能。

定义了约束以阐明给定子功能的属性 category 标准化值的存在。这意味着 DiagnosticServiceInstance 给定子类的一个实例一次只具有单个子功能。

诊断服务 category 属性的可能值:

如适用,AUTOSAR 允许使用属性 category 的标准化值以外的值。

但是在这种情况下,属性 category 的专有值应加上公司特定的名称片段前缀(如例 4.4 所演示),以避免 AUTOSAR 标准自身声称的可能值列表将来扩展时可能发生的冲突。

&lt;AR-PACKAGE&gt;
&lt;SHORT-NAME&gt; DiagnosticExtractExample &lt;/SHORT-NAME&gt;
&lt;ELEMENTS&gt;
&lt;DIAGNOSTIC-ECU-RESET&gt;
&lt;SHORT-NAME&gt; ResetTheHardWay &lt;/SHORT-NAME&gt;
&lt;CATEGORY&gt; ACME\_REALLY\_HARD\_RESET &lt;/CATEGORY&gt;
&lt;/DIAGNOSTIC-ECU-RESET&gt; &lt;/ELEMENTS&gt;
&lt;/AR-PACKAGE&gt;
4.3.8.1. SessionControl

本章描述诊断服务 SessionControl(0x10)的建模。该服务的明显目标是支持从一个诊断会话切换到另一个。

DiagnosticSessionControl 的建模:

根据 ISO 14229-1 [17],诊断服务 SessionControl 定义子功能。

DiagnosticSessionControl 子功能的标识:

实际上,可能的子功能与由元类 DiagnosticSession 表示的诊断会话概念密切相关。

而后者又有一个属性 id,它直接对应于 DiagnosticSessionControl 适用子功能的编号。

换言之,DiagnosticSessionControl 的子功能通过引用 DiagnosticSessionControl.diagnosticSession 标识。

DiagnosticSessionControl . diagnosticSession 的存在性:

意味着在给定 DiagnosticSessionControl 创建之时,适用的 DiagnosticSession 已经存在。

假定情况总是如此,因为 DiagnosticSession 的定义是为诊断通信打下基础的组成部分。

很难预见 DiagnosticSession 在通向完整 DiagnosticExtract 的工作流接近尾声时才被定义的情形。

表4.48:DiagnosticSessionControl(DiagnosticSessionControl)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::SessionControl | | 说明 | This represents an instance of the "Session Control" diagnostic service. Tags: atp.recommendedPackage=DiagnosticSessionControls | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceInstance , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
diagnostic Session DiagnosticSession 0..1 ref This represents the applicable DiagnosticSessions
sessionControl Class DiagnosticSession ControlClass 0..1 ref This reference substantiates that abstract reference in the role serviceClass for this specific concrete class. Thereby, the reference represents the ability to access shared attributes among all DiagnosticSessionControl in the given context.

reference DiagnosticSessionControl . diagnosticSession 的存在性:

表4.49:DiagnosticSessionControlClass(DiagnosticSessionControlClass)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::SessionControl | | 说明 | This meta-class contains attributes shared by all instances of the "Session Control" diagnostic service. Tags: atp.recommendedPackage=DiagnosticSessionControls | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceClass , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
s3Server Timeout TimeValue 0..1 attr Time for the server to keep a diagnostic session other than the default session active while not receiving any diagnostic request message.

5 这类似于软件开发项目中常用数据类型的定义。

属性 DiagnosticSessionControlClass.s3ServerTimeout 最小值的限制:

4.3.8.2. SecurityAccess

本章描述诊断服务 SecurityAccess(0x27)的建模。

DiagnosticSecurityAccess . securityLevel 的存在性:

[TPS_DEXT_01053] 的含义是:在配置工作流的中间步骤中该引用可能缺失。但在从 DiagnosticExtract 生成 ECU 配置的时点,需要该引用才能理解给定 DiagnosticSecurityAccess 的模型。

{重定义 serviceClass}

请注意(如第 4.3.8 节已解释),该服务的子功能通过 category 属性建模。

鉴于许多其他诊断服务与 SecurityAccess 之间的概念差异,诊断服务 SecurityAccess 的适用子功能不通过属性 DiagnosticSecurityAccess.category 定义。

诊断服务 SecurityAccess 执行内的工作流:

因此,子功能可以笼统地描述为 requestSeed 和 sendKey,这正是 ISO 14229-1 [17] 的做法。

按照这一逻辑,requestSeed 可以被指派一个特定编号以标识子功能,然后 sendKey 子功能将被指派 requestSeed 子功能编号 + 1。这同样完全符合 ISO 14229-1 [17]。

但是,还有另一个需要考虑的维度,即 DiagnosticSecurityLevel。根据 ISO 14229-1 [17],不同的安全级别为子功能标识符使用不同的编号。

DiagnosticSecurityAccess.requestSeedId 的语义:

DiagnosticSecurityAccess.requestSeedId 的可能值:

支持的取值范围由以下列表组成:

  • 闭区间 0x01 .. 0x41 中的所有奇数

  • 0x5F(对应于 ISO 26021-2 [18] 规定的车载火工装置寿命末期激活的情形)

  • 闭区间 0x61 .. 0x7E 中的所有奇数

该规则应在 DEXT 完成时施加。

与诊断服务 SessionControl 的类似情形(见第 4.3.8.1 节)相反,没有切实的证据表明在创建引用方 DiagnosticSecurityAccess 之前 DiagnosticSecurityLevel 总是已经存在、从而能够正确建立角色 DiagnosticSecurityAccess.securityLevel 中的引用。

将引用 DiagnosticSecurityAccess.securityLevel 设为 <atpSplitable> 的动机:

当然,如果 DiagnosticSecurityLevel 在 DiagnosticSecurityAccess 定义之前事实上的确存在,则该引用可以直接插入模型。

6 偶数保留用于标识相应的 sendKey 子功能,如 [TPS_DEXT_01036] 所解释。

表4.50:DiagnosticSecurityAccess(DiagnosticSecurityAccess)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::SecurityAccess | | 说明 | This represents an instance of the "Security Access" diagnostic service. Tags: atp.recommendedPackage=DiagnosticSecurityAccesss | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceInstance , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
requestSeedId PositiveInteger 0..1 attr This would be 0x01, 0x03, 0x05, ... The sendKey id can be computed by adding 1 to the requestSeedId
securityAccess Class DiagnosticSecurity AccessClass 0..1 ref This reference substantiates that abstract reference in the role serviceClass for this specific concrete class. Thereby, the reference represents the ability to access shared attributes among all DiagnosticSecurityAccess in the given context.
securityDelay TimeOnBoot TimeValue 0..1 attr Start delay timer on power on in seconds. This delay indicates the time after ECU boot power-on where no security access request is accepted.
securityLevel DiagnosticSecurityLevel 0..1 ref This reference identifies the applicable security level for the security access. Stereotypes: atpSplitable Tags: atp.Splitkey=securityLevel

DiagnosticSecurityAccess . requestSeedId 属性的存在性:

DiagnosticSecurityAccess . securityLevel 属性的存在性:

DiagnosticSecurityAccessClass . securityDelayTimeOnBoot 属性的存在性:

表4.51:DiagnosticSecurityAccessClass(DiagnosticSecurityAccessClass)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::SecurityAccess | | 说明 | This meta-class contains attributes shared by all instances of the "Security Access" diagnostic service. Tags: atp.recommendedPackage=DiagnosticSecurityAccesss | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceClass , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

4.3.8.3. 认证

本章描述诊断服务 Authentication(0x29)的建模。该服务的目的是允许测试仪向 ECU 表明自己的身份,从而获得其 “角色” 所允许的服务访问。

诊断服务 Authentication 的建模遵循为其他诊断服务建立的模式。特别是,元类 DiagnosticAuthentication 表示该服务的一个实例,而元类 DiagnosticAuthenticationClass 承载由该服务所有实例共享的配置。

诊断服务 Authentication 的子功能:

  • 去认证(De-authentication),由元类 DiagnosticDeAuthentication 形式化。

  • 单向验证证书,由元类 DiagnosticVerifyCertificateUnidirectional 形式化。

  • 双向验证证书,由元类 DiagnosticVerifyCertificateBidirectional 形式化。

  • 所有权证明,由元类 DiagnosticProofOfOwnership 形式化。

  • 认证配置,由元类 DiagnosticAuthenticationConfiguration 形式化。

诊断服务 Authentication 支持的认证方法:

诊断服务 Authentication 的强制子功能:

  • 去认证(De-authentication),由元类 DiagnosticDeAuthentication 形式化。

  • 所有权证明,由元类 DiagnosticProofOfOwnership 形式化。

  • 认证配置,由元类 DiagnosticAuthenticationConfiguration 形式化。

  • 以下之一:

  • 单向验证证书,由元类 DiagnosticVerifyCertificateUnidirectional 形式化。

  • 双向验证证书,由元类 DiagnosticVerifyCertificateBidirectional 形式化。

该规则应在 DEXT 完成时施加。

DiagnosticAuthTransmitCertificateEvaluation . evaluationId 的语义:

该属性的值既不由 ISO 14229-1 [17] 标准化,也不由 AUTOSAR 标准化,因此具有 OEM 特定的含义。

表4.52:DiagnosticAuthentication(DiagnosticAuthentication)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::Authentication | | 说明 | This meta-class represents the ability to configure the usage of the UDS service Authentication in the Diagnostic extract. | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceInstance , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 子类 | DiagnosticAuthTransmitCertificate, DiagnosticAuthenticationConfiguration, DiagnosticDeAuthentication, DiagnosticProofOfOwnership, DiagnosticVerifyCertificateBidirectional, DiagnosticVerifyCertificate Unidirectional | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
Class DiagnosticAuthentication (abstract)
authentication Class Diagnostic AuthenticationClass 0..1 ref This represents the corresponding "class", i.e. this meta-class provides properties that are shared among all instances of applicable sub-classes of DiagnosticService Instance. The subclasses that affected by this pattern implement references to the applicable "class"-role that substantiate this abstract reference.

表4.53:DiagnosticAuthentication(DiagnosticAuthentication)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::Authentication | | 说明 | This meta-class contains configuration shared by all instances of the Authentication diagnostic service. Tags: atp.recommendedPackage=DiagnosticAuthentications | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceClass , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

表4.54:DiagnosticAuthenticationConfiguration(DiagnosticAuthenticationConfiguration)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::Authentication | | 说明 | This meta-class represents the subfunction to configure the authentication. Tags: atp.recommendedPackage=DiagnosticAuthentications | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticAuthentication , DiagnosticCommonElement DiagnosticServiceInstance , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

表4.55:DiagnosticVerifyCertificateBidirectional(DiagnosticVerifyCertificateBidirectional)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::Authentication | | 说明 | This meta-class represents the subfunction to do a bidirectional verification of the certificate. Tags: atp.recommendedPackage=DiagnosticAuthentications | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticAuthentication , DiagnosticCommonElement , DiagnosticServiceInstance , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element | | 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::Authentication | | 说明 | This meta-class represents the subfunction to do a unidirectional verification of the certificate. Tags: atp.recommendedPackage=DiagnosticAuthentications | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticAuthentication , DiagnosticCommonElement DiagnosticServiceInstance , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
Class DiagnosticVerifyCertificateUnidirectional

表4.56:DiagnosticVerifyCertificateUnidirectional(DiagnosticVerifyCertificateUnidirectional)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::Authentication | | 说明 | This meta-class represents the subfunction to remove the authentication Tags: atp.recommendedPackage=DiagnosticAuthentications | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticAuthentication , DiagnosticCommonElement , DiagnosticServiceInstance , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

表4.57:DiagnosticProofOfOwnership(DiagnosticProofOfOwnership)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::Authentication | | 说明 | This meta-class represents the subfunction to provide proof of ownership. Tags: atp.recommendedPackage=DiagnosticAuthentications | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticAuthentication , DiagnosticCommonElement , DiagnosticServiceInstance , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

表4.58:DiagnosticAuthTransmitCertificate(DiagnosticAuthTransmitCertificate)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::Authentication | | 说明 | This meta-class represents the sub-function to transmit a certificate Tags: atp.recommendedPackage=DiagnosticAuthTransmitCertificates | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticAuthentication , DiagnosticCommonElement , DiagnosticServiceInstance , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
certificate Evaluation DiagnosticAuthTransmit CertificateEvaluation * aggr This aggregation represents a collection of certificate evaluation configurations.

DiagnosticAuthTransmitCertificateEvaluation . function 的语义:

属性 DiagnosticAuthTransmitCertificateEvaluation.function 的标准化值:

请注意,如果能确保属性 DiagnosticAuthTransmitCertificateEvaluation.function 的专有值不会与该属性标准化值将来可能的扩展冲突,则完全可以使用 [TPS_DEXT_01194] 标准化值以外的值。

例如,可以通过在专有值内使用公司特定的前缀来确保避免潜在的名称冲突。

表4.59:DiagnosticAuthTransmitCertificateEvaluation(DiagnosticAuthTransmitCertificateEvaluation)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::Authentication | | 说明 | This meta-class represents the ability to configure a certificate evaluation in the context of a diagnostic authentication. | | 基类 | ARObject , Identifiable , MultilanguageReferrable , Referrable | | 聚合于 | DiagnosticAuthTransmitCertificate.certificateEvaluation |

属性 类型 多重性 种类 备注
evaluationId PositiveInteger 0..1 attr This attributes represents the ID of the certificate evaluation.
function String 0..1 attr This attribute represents the description of the actual semantics of the corresponding evaluation ID.
4.3.8.4. EcuReset

本章描述诊断服务 EcuReset(0x11)的建模。

表4.60:DiagnosticEcuReset(DiagnosticEcuReset)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::EcuReset | | 说明 | This represents an instance of the "ECU Reset" diagnostic service. Tags: atp.recommendedPackage=DiagnosticEcuResets | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceInstance , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
customSub Function Number PositiveInteger 0..1 attr This attribute shall be used to define a custom sub-function number if none of the standardized values of category shall be used.
ecuResetClass DiagnosticEcuReset Class 0..1 ref This reference substantiates that abstract reference in the role serviceClass for this specific concrete class. Thereby, the reference represents the ability to access shared attributes among all DiagnosticEcuReset in the given context.

表4.61:DiagnosticEcuResetClass(DiagnosticEcuResetClass)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::EcuReset | | 说明 | This meta-class contains attributes shared by all instances of the "Ecu Reset" diagnostic service. Tags: atp.recommendedPackage=DiagnosticEcuResets | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceClass , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
respondTo Reset DiagnosticResponseTo EcuResetEnum 0..1 attr This attribute defines whether the response to the Ecu Reset service shall be transmitted before or after the actual reset.

| Enumeration | DiagnosticResponseToEcuResetEnum |

| Package | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::EcuReset | | Note | This enumeration controls the point in time in which a response to the reception of an EcuReset service shall be generated. | | Aggregated by | DiagnosticEcuResetClass.respondToReset | | Literal | Description | | respondAfterReset | Answer to EcuReset service should come after the reset. Tags: atp.EnumerationLiteralIndex=0 | | respondBefore Reset | Answer to EcuReset service should come before the reset. Tags: atp.EnumerationLiteralIndex=1 |

请注意(如第 4.3.8 节已解释),该服务的子功能通过 category 属性建模。

DiagnosticEcuReset.category 的适用值:

  • HARD_RESET

  • KEY_OFF_ON_RESET

  • SOFT_RESET

  • ENABLE_RAPID_POWER_SHUT_DOWN

  • DISABLE_RAPID_POWER_SHUT_DOWN

这些值的含义在相应的 ISO 文档 [17] 中描述。

category 值与 ISO 14229-1 中提到的数值的对应关系:

数值与 [TPS_DEXT_01056] 规定的 category 预定义值之间的对应关系显而易见,因为 [TPS_DEXT_01056] 中定义的值直接受 ISO 14229-1 [17] 标准文档的启发。

服务 EcuReset 子功能的主机厂特定值:

在这种情况下,可以为 category 定义进一步的值,前提是使用自定义前缀以避免与 AUTOSAR 标准的进一步扩展(即 [TPS_DEXT_01056])发生潜在的名称冲突。

DiagnosticEcuReset.customSubFunctionNumber 的语义:

由属性 DiagnosticEcuReset.category 和 DiagnosticEcuReset.customSubFunctionNumber 的值创建的元组完整规定了主机厂或供应商特定子功能的标识。

DiagnosticEcuReset . customSubFunctionNumber 的存在性:

该规则应在 DEXT 完成时施加。

DiagnosticEcuReset.customSubFunctionNumber 的取值范围:

该规则应在 DEXT 完成时施加。

4.3.8.5. CommunicationControl

本章描述诊断服务 CommunicationControl(0x28)的建模。该诊断服务的目的是启用或禁用 ISignalIPduGroup。

然而,启用或禁用的实际实现显然不直接在诊断栈内执行。它需要与 BswM 进行一些交互,由 BswM 实现启用算法。

因此,为此建模的元类不需要引用 ISignalIPduGroup,而是向 BswM 实现一个模式请求。

DiagnosticComControl.category 的允许值:

  • ENABLE_RX_AND_TX

  • DISABLE_RX_AND_TX

  • ENABLE_RX_AND_DISABLE_TX

  • DISABLE_RX_AND_ENABLE_TX

  • ENABLE_RX_AND_DISABLE_TX_WITH_ENHANCED_ADDRESS_INFORMATION

  • ENABLE_RX_AND_TX_WITH_ENHANCED_ADDRESS_INFORMATION

这些值的含义在相应的 ISO 文档 [17] 中描述。

category 值与 ISO 14229-1 中提到的数值的对应关系:

数值与 [TPS_DEXT_01057] 规定的 category 预定义值之间的对应关系显而易见,因为 [TPS_DEXT_01057] 中定义的值直接受 ISO 14229-1 [17] 标准文档的启发。

服务 CommunicationControl 子功能的主机厂特定值:

在这种情况下,可以为 category 定义进一步的值,前提是使用自定义前缀以避免与 AUTOSAR 标准的进一步扩展(即 [TPS_DEXT_01057])发生潜在的名称冲突。

DiagnosticComControl.customSubFunctionNumber 的语义:

由属性 DiagnosticComControl.category 和 DiagnosticComControl.customSubFunctionNumber 的值创建的元组完整规定了主机厂或供应商特定子功能的标识。

DiagnosticComControl . customSubFunctionNumber 的存在性:

该规则应在 DEXT 完成时施加。

DiagnosticComControl.customSubFunctionNumber 的可能值:

该规则应在 DEXT 完成时施加。

DiagnosticComControlClass 对 CommunicationCluster 状态管理的影响:

  • 所有 CommunicationCluster 都受影响。为此,属性 allChannels 能够标识适用的 CommunicationCluster。

当预期的语义实际上是定义对所有 CommunicationCluster 的影响时,却要求引用所有适用的 CommunicationCluster,这看起来可能违反直觉。

但是,可能存在不参与诊断工作流的私有 CommunicationCluster:这些需要排除在范围之外,因此显式标识适用的 CommunicationCluster 是有意义的。

  • 选定数量的 CommunicationCluster 受影响。这在概念上不同于另一个用例,因为它需要一个附加的属性来保存通常由 OEM 角色指派的 subnetNumber。

在大多数情况下,对 CommunicationCluster 的引用就足以作为相应总线上状态管理的主体。换言之,CommunicationCluster 对应于一个 ComM 通道。

目前,该规则的唯一例外是以太网:就通信管理而言,每个 VLAN(建模为 EthernetPhysicalChannel)可以由自己的 ComM 通道管理。

因此,DiagnosticComControlClass 的建模需要考虑 PhysicalChannel。另一方面,对于引用 CommunicationCluster 完全满足需要的总线系统,如果 CommunicationCluster 有资格作为引用目标会更好。

因此,[TPS_DEXT_01032] 阐明了对 CommunicationCluster 的引用的语义,而 [TPS_DEXT_01186] 聚焦于 EthernetPhysicalChannel 在诊断服务 CommunicationControl 上下文中的特定角色。

DiagnosticComControlClass 对 VLAN 状态管理的影响:

  • 所有 VLAN 都受影响。为此,角色 allPhysicalChannels 中的引用能够标识适用的 VLAN。

当预期的语义实际上是定义对所有 VLAN 的影响时,却要求引用所有适用的 VLAN,这看起来可能违反直觉。

但是,可能存在不参与诊断工作流的私有 VLAN:这些需要排除在范围之外,因此显式标识适用的 VLAN 是有意义的。

  • 选定数量的 VLAN 受影响。这在概念上不同于另一个用例,因为它需要一个附加的属性来保存通常由 OEM 角色指派的 subnetNumber。

表4.62:CommunicationCluster(CommunicationCluster)

| 包 | M2::AUTOSARTemplates::SystemTemplate::Fibex::FibexCore::CoreTopology | | 说明 | The CommunicationCluster is the main element to describe the topological connection of communicating ECUs. A cluster describes the ensemble of ECUs, which are linked by a communication medium of arbitrary topology (bus, star, ring, ...). The nodes within the cluster share the same communication protocol, which may be event-triggered, time-triggered or a combination of both. A CommunicationCluster aggregates one or more physical channels. Tags: vh.latestBindingTime=postBuild | | 基类 | ARElement , ARObject , CollectableElement , FibexElement , Identifiable , MultilanguageReferrable , PackageableElement , Referrable , UploadableDesignElement , UploadablePackageElement | | 子类 | AbstractCanCluster , EthernetCluster, FlexrayCluster, LinCluster, UserDefinedCluster | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
baudrate PositiveUnlimitedInteger 0..1 attr Channels speed in bits/s.
physical Channel PhysicalChannel * aggr This relationship defines which channel element belongs to which cluster. A channel shall be assigned to exactly one cluster, whereas a cluster may have one or more channels. Note: This atpSplitable property has no atp.Splitkey due to atpVariation (PropertySetPattern). Stereotypes: atpSplitable; atpVariation Tags: vh.latestBindingTime=systemDesignTime
protocolName String 0..1 attr The name of the protocol used.
protocolVersion String 0..1 attr The version of the protocol used.

DiagnosticComControlSpecificChannel.subnetNumber 的适用取值范围:

该规则应在 DEXT 完成时施加。

请注意,[constr_1336] 所蕴含的规定不是随意引入的,其概念背景来自 ISO 14229-1 [17] 标准文档。

显然,名为 CommunicationControl 的诊断服务将影响外围 ECU 的模式管理。但这一影响不由任何进一步的属性或引用定义——DiagnosticComControl 本身就是影响。

通过定义一个 DiagnosticComControl 并将 category 设置为适用值之一(例如 ENABLE_RX_AND_TX),可以完整地表达预期语义。

属性 DiagnosticComControlSubNodeChannel.subNodeNumber 的允许取值范围:

该规则应在 DEXT 完成时施加。

属性 DiagnosticComControlClass.specificChannel 与 DiagnosticComControlClass.subNodeChannel 的区别:

DiagnosticComControlSubNodeChannel . subNodeChannel 属性的存在性:

  • ENABLE_RX_AND_DISABLE_TX_WITH_ENHANCED_ADDRESS_INFORMATION 或

  • ENABLE_RX_AND_TX_WITH_ENHANCED_ADDRESS_INFORMATION。

该规则应在 DEXT 完成时施加。

表4.63:DiagnosticComControl(DiagnosticComControl)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::CommunicationControl | | 说明 | This represents an instance of the "Communication Control" diagnostic service. Tags: atp.recommendedPackage=DiagnosticCommunicationControls | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceInstance , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
comControl Class DiagnosticComControl Class 0..1 ref This reference substantiates that abstract reference in the role serviceClass for this specific concrete class. Thereby, the reference represents the ability to access shared attributes among all DiagnosticComControl in the given context.
customSub Function Number PositiveInteger 0..1 attr This attribute shall be used to define a custom sub-function number if none of the standardized values of category shall be used.

表4.64:DiagnosticComControlSpecificChannel(DiagnosticComControlSpecificChannel)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::CommunicationControl | | 说明 | This represents the ability to add further attributes to the definition of a specific channel that is subject to the diagnostic service "communication control". | | 基类 | ARObject | | 聚合于 | DiagnosticComControlClass.specificChannel |

属性 类型 多重性 种类 备注
specificChannel CommunicationCluster 0..1 ref This represents the affected CommunicationCluster in the role specificChannel
specificPhysical Channel EthernetPhysical Channel 0..1 ref This represents the affected specific EthernetPhysical Channel.
subnetNumber PositiveInteger 0..1 attr This represents the applicable subnet number (which is an arbitrary number ranging from 1..14)

表4.65:DiagnosticComControlClass(DiagnosticComControlClass)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::CommunicationControl | | 说明 | This meta-class contains attributes shared by all instances of the "Communication Control" diagnostic service. Tags: atp.recommendedPackage=DiagnosticCommunicationControls | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceClass , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
allChannels CommunicationCluster * ref This reference represents the semantics that all available channels shall be affected. It is still necessary to refer to individual CommunicatuionClusters because there could be private CommunicationClusters in the System Extract that are not subject to the service "communication control". By referring to the applicable CommunicationClusters it can be made sure that only the affected Communication Clusters are accessed.
allPhysical Channels EthernetPhysical Channel * ref This reference represents the semantics that all available channels shall be affected. It is still necessary to refer to individual EthernetPhysicalChannels because there could be private VLANs (and thus private EthernetPhysical Channels) in the System Extract that are not subject to the service "communication control". By referring to the applicable EthernetPhysicalChannels it can be made sure that only the affected EthernetPhysical Channels are accessed. Tags: xml.namePlural=ALL-PHYSICAL-CHANNELS
specificChannel DiagnosticComControl SpecificChannel * aggr This represents the ability to add additional attributes to the case that only specific channels are supposed to be considered,
subNode Channel DiagnosticComControl SubNodeChannel * aggr This attribute represents the ability to add further attributes to the definition of a specific sub-node channel that is subject to the diagnostic service "communication control".

表4.66:DiagnosticComControlSubNodeChannel(DiagnosticComControlSubNodeChannel)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::CommunicationControl | | 说明 | This represents the ability to add further attributes to the definition of a specific sub-node channel that is subject to the diagnostic service "communication control". | | 基类 | ARObject | | 聚合于 | DiagnosticComControlClass.subNodeChannel |

属性 类型 多重性 种类 备注
subNode Channel CommunicationCluster 0..1 ref This represents the affected CommunicationCluster in the role subNodeChannel
subNode Number PositiveInteger 0..1 attr This represents the applicable subNode number. The value corresponds to the request message parameter nodeIdentificationNumber of diagnostic service CommunicationControl (0x28).
subNode Physical Channel EthernetPhysical Channel 0..1 ref This represents the affected sub-node EthernetPhysical Channel.
4.3.8.6. ControlDTCSetting

本章描述诊断服务 ControlDTCSetting(0x85)的建模。该诊断服务的目的是让测试仪告知诊断栈停止或恢复诊断故障码的更新。

属性 DiagnosticControlDTCSetting.category 的标准化值:

表4.67:DiagnosticControlDTCSetting(DiagnosticControlDTCSetting)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::ControlDTCSetting | | 说明 | This represents an instance of the "Control DTC Setting" diagnostic service. Tags: atp.recommendedPackage=DiagnosticControlDtcSettings | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceInstance Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

表4.68:DiagnosticControlDTCSetting(DiagnosticControlDTCSetting)

属性 类型 多重性 种类 备注
dtcSettingClass DiagnosticControlDTC SettingClass 0..1 ref This reference substantiates that abstract reference in the role serviceClass for this specific concrete class. Thereby, the reference represents the ability to access shared attributes among all DiagnosticControlDTCSetting in the given context.

表4.69:DiagnosticControlDTCSettingClass(DiagnosticControlDTCSettingClass)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::ControlDTCSetting | | 说明 | This meta-class contains attributes shared by all instances of the "Control DTC Setting" diagnostic service. Tags: atp.recommendedPackage=DiagnosticControlDtcSettings | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceClass , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
controlOption RecordPresent Boolean 0..1 attr This represents the decision whether the DTCSetting ControlOptionRecord (see ISO 14229-1) is in general supported in the request message.
4.3.8.7. DataByIdentifier

本章描述诊断服务 ReadDataByIdentifier(0x22)和 WriteDataByIdentifier(0x2E)的建模。

该诊断服务的目的是使测试仪能够从 AUTOSAR 诊断栈请求数据记录的值。数据记录由正式建模的 DiagnosticDataIdentifier 标识。

该诊断服务的建模包含两个元类 DiagnosticReadDataByIdentifier 和 DiagnosticWriteDataByIdentifier。这两个元类都需要规定 DiagnosticDataIdentifier 集合和适用的 DiagnosticAccessPermission 集合。

由于这些属性在 DiagnosticReadDataByIdentifier 和 DiagnosticWriteDataByIdentifier 的实例之间共享,创建了一个名为 DiagnosticDataByIdentifier 的抽象基类,提供对 DiagnosticDataIdentifier 和 DiagnosticAccessPermission 的实际引用。

在运行时读取多个 DID 的能力通过属性 DiagnosticReadDataByIdentifierClass.maxDidToRead 控制,因此在配置期将属性 dataIdentifier 的多重性限制为 1 就足够了。

Please note that the reference DiagnosticDataByIdentifier . dataIdentifier goes to DiagnosticAbstractDataIdentifier . This modeling approach allows to actually reference any of the meta-classes that inherit from DiagnosticAbstract-

.

表4.70:DiagnosticReadDataByIdentifier(DiagnosticReadDataByIdentifier)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::DataByIdentifier | | 说明 | This represents an instance of the "Read Data by Identifier" diagnostic service. Tags: atp.recommendedPackage=DiagnosticDataByIdentifiers | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticDataByIdentifier , DiagnosticServiceInstance , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
readClass DiagnosticReadDataBy IdentifierClass 0..1 ref This reference substantiates that abstract reference in the role serviceClass for this specific concrete class. Thereby, the reference represents the ability to access shared attributes among all DiagnosticReadDataBy Identifier in the given context.

reference DiagnosticDataByIdentifier . dataIdentifier 的存在性:

DiagnosticDataByIdentifier 的建模表示 DiagnosticExtract 内诊断服务的具体实例。但是,有些属性在 DiagnosticReadDataByIdentifier 的所有实例之间共享。

为此引入了专用的服务类 DiagnosticReadDataByIdentifierClass。

表4.71:DiagnosticWriteDataByIdentifier(DiagnosticWriteDataByIdentifier)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::DataByIdentifier | | 说明 | This represents an instance of the "Write Data by Identifier" diagnostic service. Tags: atp.recommendedPackage=DiagnosticDataByIdentifiers | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticDataByIdentifier , DiagnosticServiceInstance , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
writeClass DiagnosticWriteDataBy IdentifierClass 0..1 ref This reference substantiates that abstract reference in the role serviceClass for this specific concrete class. Thereby, the reference represents the ability to access shared attributes among all DiagnosticWriteDataBy Identifier in the given context.

表4.72:DiagnosticWriteDataByIdentifier(DiagnosticWriteDataByIdentifier)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::DataByIdentifier | | 说明 | This meta-class contains attributes shared by all instances of the "Write Data by Identifier" diagnostic service. Tags: atp.recommendedPackage=DiagnosticDataByIdentifiers | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceClass , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

表4.73:DiagnosticWriteDataByIdentifierClass(DiagnosticWriteDataByIdentifierClass)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::DataByIdentifier | | 说明 | This represents an abstract base class for all diagnostic services that access data by identifier. | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceInstance , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 子类 | DiagnosticReadDataByIdentifier, DiagnosticReadScalingDataByIdentifier, DiagnosticWriteDataBy Identifier | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
dataIdentifier DiagnosticAbstractData Identifier 0..1 ref This represents the linked DiagnosticDataIdentifier.

表4.74:DiagnosticDataByIdentifier(DiagnosticDataByIdentifier)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::DataByIdentifier | | 说明 | This meta-class contains attributes shared by all instances of the "Read Data by Identifier" diagnostic service. Tags: atp.recommendedPackage=DiagnosticDataByIdentifiers |

表4.75:DiagnosticReadDataByIdentifierClass(DiagnosticReadDataByIdentifierClass)

| 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceClass Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
maxDidToRead PositiveInteger 0..1 attr This attribute represents the maximum number of allowed DIDs in a single instance of DiagnosticReadDataBy Identifier.

请注意,可以从不同的 DiagnosticServiceInstance 创建对同一个具体 DiagnosticDataIdentifier 的引用。

表4.76:DiagnosticValueNeeds(DiagnosticValueNeeds)

| 包 | M2::AUTOSARTemplates::CommonStructure::ServiceNeeds | | 说明 | Specifies the general needs on the configuration of the Diagnostic Communication Manager (DCM) which are not related to a particular item (e.g. a PID). The main use case is the mapping of service ports to the DCM which are not related to a particular item. In the case of using a sender receiver communicated value, the related value shall be taken via assigned Data in the role "signalBasedDiagnostics". In case of using a client/server communicated value, the related value shall be communicated via the port referenced by assignedPort. The details of this communication (e.g. appropriate naming conventions) are specified in the related software specifications (SWS). | | 基类 | ARObject , DiagnosticCapabilityElement , Identifiable , MultilanguageReferrable , Referrable , Service Needs | | 聚合于 | BswServiceDependency.serviceNeeds, SwcServiceDependency.serviceNeeds |

属性 类型 多重性 种类 备注
dataLength PositiveInteger 0..1 attr This attribute is applicable only if the DiagnosticValue Needs is aggregated within a BswModuleDependency. This attribute represents the length of data (in bytes) provided for this particular PID signal.
diagnosticValue Access DiagnosticValueAccess Enum 0..1 attr This attribute is applicable only if the DiagnosticValue Needs is aggregated within a BswModuleDependency. This attribute controls whether the data can be read and written or whether it is to be handled read-only.
fixedLength Boolean 0..1 attr This attribute is applicable only if the DiagnosticValue Needs is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed.
processingStyle DiagnosticProcessing StyleEnum 0..1 attr This attribute controls whether interaction requires the software-component to react synchronously on a request or whether it processes the request in background but still the DCM has to issue the call again to eventually obtain the result of the request.

| Enumeration | DiagnosticValueAccessEnum |

| Package | M2::AUTOSARTemplates::CommonStructure::ServiceNeeds | | Note | Defines the access of the configured diagnostic current values which will be used by the Dem or Dcm module. |

| Enumeration | DiagnosticValueAccessEnum |

| Aggregated by | DiagnosticValueNeeds.diagnosticValueAccess | | Literal | Description | | readOnly | The access to the data element is limited to read-only. This is typically used to read-out diagnostic information (e.g. current values). Tags: atp.EnumerationLiteralIndex=0 | | readWrite | The value of the diagnostic data element is classified as configurable (read and write access is possible). Tags: atp.EnumerationLiteralIndex=1 | | writeOnly | The access to the data element is limited to write-only. This supports the use case where the Dcm just writes data to the application software without the intention to read it back, Tags: atp.EnumerationLiteralIndex=2 |

| Enumeration | DiagnosticProcessingStyleEnum |

| Package | M2::AUTOSARTemplates::CommonStructure::ServiceNeeds | | Note | This meta-class represents the ability to define the processing style of diagnostic requests. | | Aggregated by | DiagnosticValueNeeds.processingStyle | | Literal | Description | | processingStyle Asynchronous | The software-component processes the request in background but still the Dcm has to issue the call again to eventually obtain the result of the request. Tags: atp.EnumerationLiteralIndex=0 | | processingStyle AsynchronousWith Error | The software-component processes the request in background but still the Dcm has to issue the call again to eventually obtain the result of the request or handle error code. Tags: atp.EnumerationLiteralIndex=1 | | processingStyle Synchronous | The software-component is supposed to react synchronously on the request. Tags: atp.EnumerationLiteralIndex=2 |

[TPS_DEXT_01146] 对服务 ReadScalingDataByIdentifier(0x24)的支持

对 DiagnosticReadScalingDataByIdentifier.dataIdentifier 的限制:

该规则应在 DEXT 完成时施加。

DiagnosticDataElement . scalingInfoSize 的存在性:

该规则应在 DEXT 完成时施加。

表4.77:DiagnosticReadScalingDataByIdentifier(DiagnosticReadScalingDataByIdentifier)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::DataByIdentifier | | 说明 | This represents an instance of the "Read Scaling Data by Identifier" diagnostic service. Tags: atp.recommendedPackage=DiagnosticDataByIdentifiers | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticDataByIdentifier , DiagnosticServiceInstance , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
readScaling DataClass DiagnosticReadScaling DataByIdentifierClass 0..1 ref This reference substantiates that abstract reference in the role serviceClass for this specific concrete class. Thereby, the reference represents the ability to access shared attributes among all DiagnosticReadScalingData ByIdentifier in the given context.

表4.78:DiagnosticReadScalingDataByIdentifierClass(DiagnosticReadScalingDataByIdentifierClass)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::DataByIdentifier | | 说明 | This meta-class contains attributes shared by all instances of the "Read Scaling Data by Identifier" diagnostic service. Tags: atp.recommendedPackage=DiagnosticDataByIdentifiers | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceClass , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

4.3.8.8. IOControl

本章描述诊断服务 InputOutput Control(0x2F)的建模。该服务的目的是为测试仪提供覆盖与 AUTOSAR 硬件抽象交换的值的能力。

DiagnosticIOControl 属性的含义:

returnControlToEcu 能力:

DiagnosticIOControl.dataIdentifier 的含义:

但是,在某些情况下 dataIdentifier 建模请求消息的载荷(DiagnosticIOControl.shortTermAdjustment 设置为 true),在某些情况下它表示响应消息的载荷。

请注意,被引用的 dataIdentifier 本身可以聚合若干 DiagnosticDataElement。

在运行时,对于服务 InputOutput Control 的特定执行,可能只有某些 DiagnosticDataElement 是相关的。为此,诊断消息包含所谓的 ControlEnableMaskRecord(更多信息请参见 [SWS_DCM_00581])。

DiagnosticIOControl 标识符的定义:

表4.79:DiagnosticIOControl(DiagnosticIOControl)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::IOControl | | 说明 | This represents an instance of the "I/O Control" diagnostic service. Tags: atp.recommendedPackage=DiagnosticIoControls | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceInstance , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
controlEnable MaskBit DiagnosticControl EnableMaskBit * aggr This aggregation represents the control mask record consisting of single bits.
dataIdentifier DiagnosticDataIdentifier 0..1 ref This represents the corresponding DiagnosticData Identifier
freezeCurrent State Boolean 0..1 attr Setting this attribute to true represents the ability of the Dcm to execute a freezeCurrentState.
ioControlClass DiagnosticIoControl Class 0..1 ref This reference substantiates that abstract reference in the role serviceClass for this specific concrete class. Thereby, the reference represents the ability to access shared attributes among all DiagnosticIOControl in the given context.
resetToDefault Boolean 0..1 attr Setting this attribute to true represents the ability of the Dcm to execute a resetToDefault.
shortTerm Adjustment Boolean 0..1 attr Setting this attribute to true represents the ability of the Dcm to execute a shortTermAdjustment.

表4.80:DiagnosticIoControlClass(DiagnosticIoControlClass)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::IOControl | | 说明 | This meta-class contains attributes shared by all instances of the "IO Control" diagnostic service. Tags: atp.recommendedPackage=DiagnosticIoControls | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceClass , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

InputOutput Control 不定义任何子功能:

DiagnosticControlEnableMaskBit 的语义:

引用 DiagnosticControlEnableMaskBit.controlledDataElement 标识属于控制掩码记录中该位所表示的 I/O 控制通道的所有 DiagnosticDataElement。

表4.81:DiagnosticIoControlNeeds(DiagnosticIoControlNeeds)

| 包 | M2::AUTOSARTemplates::CommonStructure::ServiceNeeds | | 说明 | Specifies the general needs on the configuration of the Diagnostic Communication Manager (DCM) which are not related to a particular item (e.g. a PID). The main use case is the mapping of service ports to the Dcm which are not related to a particular item. | | 基类 | ARObject , DiagnosticCapabilityElement , Identifiable , MultilanguageReferrable , Referrable , Service Needs | | 聚合于 | BswServiceDependency.serviceNeeds, SwcServiceDependency.serviceNeeds |

属性 类型 多重性 种类 备注
currentValue DiagnosticValueNeeds 0..1 ref Reference to the DiagnosticValueNeeds indicating the access to the current value via signalBasedDiagnostics.
freezeCurrent StateSupported Boolean 0..1 attr This attribute determines, if the referenced port supports temporary freezing of I/O value. The temporary freeze is not supported if the enclosing DiagnosticIoControlNeeds is aggregated by a Swc ServiceDependency, see [constr_1364].
resetToDefault Supported Boolean 0..1 attr This represents a flag for the existence of the ResetTo Default operation in the service interface.
shortTerm Adjustment Supported Boolean 0..1 attr This attribute determines, if the referenced port supports temporarily setting of I/O value to a specific value provided by the diagnostic tester. The short term adjustment is not supported if the enclosing DiagnosticIoControlNeeds is aggregated by a SwcServiceDependency, see [constr_1364].

表4.82:DiagnosticControlEnableMaskBit(DiagnosticControlEnableMaskBit)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::IOControl | | 说明 | This meta-class has the ability to represent one bit in the control enable mask record. | | 基类 | ARObject | | 聚合于 | DiagnosticIOControl.controlEnableMaskBit |

属性 类型 多重性 种类 备注
bitNumber PositiveInteger 0..1 attr This attribute represents the bit number of the bit in the control mask record. Bit number 0 is the most significant bit (MSB) in the first byte of the CEMR in the network presentation.
controlledData Element DiagnosticDataElement * ref This reference represents the collection of Diagnostic DataElements that are controlled by this bit of the control mask record.

请注意,controlEnableMaskBit 的建模有意不使用 ordered 注解为聚合的 DiagnosticControlEnableMaskBit 指派位编号。

控制掩码记录不一定必须从顶到底无间隙地使用。

位 3 可以不使用,但 0、1 和 4 可以使用。

DiagnosticControlEnableMaskBit.bitNumber 应唯一:

该规则应在 DEXT 完成时施加。

请注意,在 DiagnosticIOControl 的上下文中,不要求聚合的 DiagnosticIOControl.controlEnableMaskBit.bitNumber 的最低值为 0。

引用 DiagnosticIOControl.dataIdentifier 与属性 DiagnosticIOControl.controlEnableMaskBit 之间的关系:

该规则应在 DEXT 完成时施加。

4.3.8.9. RoutineControl

本章描述诊断服务 RoutineControl(0x31)的建模。该诊断服务的目的是应测试仪的请求在诊断栈上执行一段代码,即诊断例程(Diagnostic Routine)。

诊断例程由最多三个可能的组成部分:

  • 启动例程(Start Routine)

  • 停止例程(Stop Routine)

  • 请求例程结果(Request Routine Results)

该架构对元模型的影响由 [TPS_DEXT_01077] 描述:

DiagnosticRoutine 的建模:

  • DiagnosticStartRoutine

  • DiagnosticStopRoutine

  • DiagnosticRequestRoutineResults

表4.83:DiagnosticRoutineSubfunction(DiagnosticRoutineSubfunction)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::CommonDiagnostics | | 说明 | This meta-class acts as an abstract base class to routine subfunctions. | | 基类 | ARObject , Identifiable , MultilanguageReferrable , Referrable | | 子类 | DiagnosticRequestRoutineResults, DiagnosticStartRoutine, DiagnosticStopRoutine |

属性 类型 多重性 种类 备注
access Permission DiagnosticAccess Permission 0..1 ref This reference represents the access permission of the owning routine subfunction.

DiagnosticRoutine.id 的语义:

不能使用属性 category 来标识诊断服务 RoutineControl 的子功能:

子功能实际上具有不同的属性,即 DiagnosticRoutine 的实参,需要为此目的进行专门的建模。

DiagnosticRoutine 实参的建模:

  • DiagnosticStartRoutine.request

  • DiagnosticStartRoutine.response

  • DiagnosticStopRoutine.request

  • DiagnosticStopRoutine.response

  • DiagnosticRequestRoutineResults.response

  • DiagnosticRequestRoutineResults.request

  • DiagnosticRequestRoutineResults.response

而 DiagnosticParameter 又在角色 dataElement 中聚合一个 DiagnosticDataElement(见第 4.2.1 节)。

诊断例程需要被启动:

DiagnosticRoutine . start 的存在性:

该规则应在 DEXT 完成时施加。

DiagnosticRoutine . stop and DiagnosticRoutine . requestResult 的存在性:

DiagnosticServiceSwMapping 关于同步调用 DiagnosticRoutine 的一致性:

该规则应在 DEXT 完成时施加。

DiagnosticServiceSwMapping 关于异步调用 DiagnosticRoutine 的一致性:

该规则应在 DEXT 完成时施加。

DiagnosticRoutineControl 服务是唯一同时具有子功能和标识符的 UDS 服务。ISO 14229-1 [17] 在会话和安全方面将该服务视为带标识符的服务。

换言之,针对同一标识符的 DiagnosticRoutine——带有其三个子功能 start、stop 和 requestResult——只能具有引用相同 DiagnosticSession 和 DiagnosticSecurityLevel 的 DiagnosticAccessPermission。

但是,对于具有相同标识符(DiagnosticRoutine.id)的 DiagnosticRoutine 的子功能,可以存在不同的 DiagnosticEnvironmentalCondition。

具有相同标识符的诊断例程的唯一 DiagnosticSession 和 DiagnosticSecurityLevel:

该规则应在 DEXT 完成时施加。

为此,存在从抽象基类 DiagnosticRoutineSubfunction 到角色 accessPermission 中 DiagnosticAccessPermission 的引用(见图 4.31)。

因此,从元类 DiagnosticRoutineControl(通过其抽象基类 DiagnosticServiceInstance)到元类 DiagnosticAccessPermission 的引用没有意义。

从 DiagnosticRoutineControl 到 DiagnosticAccessPermission 的引用没有意义:

7 即元类 DiagnosticStartRoutine、DiagnosticStopRoutine 和 DiagnosticRequestRoutineResults 的(抽象基类)。

(即)到元类 DiagnosticAccessPermission 的角色 accessPermission 不应使用。

该规则应在 DEXT 完成时施加。

表4.84:DiagnosticRoutine(DiagnosticRoutine)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::CommonDiagnostics | | 说明 | This meta-class represents the ability to define a diagnostic routine. Tags: atp.recommendedPackage=DiagnosticRoutines | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
id PositiveInteger 0..1 attr This is the numerical identifier used to identify the DiagnosticRoutine in the scope of diagnostic workflow Stereotypes: atpVariation Tags: vh.latestBindingTime=preCompileTime
requestResult DiagnosticRequest RoutineResults 0..1 aggr This represents the ability to request the result of a running routine.
routineInfo PositiveInteger 0..1 attr This represents the routine info byte. The info byte contains a manufacturer-specific value (for the identification of record identifiers) that is reported to the tester. Other use cases for this attribute are mentioned in ISO 27145 and ISO 26021.
start DiagnosticStartRoutine 0..1 aggr This represents the ability to start a routine
stop DiagnosticStopRoutine 0..1 aggr This represents the ability to stop a running routine.

DiagnosticRoutine . id 属性的存在性:

表4.85:DiagnosticStartRoutine(DiagnosticStartRoutine)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::CommonDiagnostics | | 说明 | This represents the ability to start a diagnostic routine. | | 基类 | ARObject , DiagnosticRoutineSubfunction , Identifiable , MultilanguageReferrable , Referrable | | 聚合于 | DiagnosticRoutine.start | | 包 | M2::AUTOSARTemplates::DiagnosticExtract::CommonDiagnostics | | 说明 | This represents the ability to stop a diagnostic routine. | | 基类 | ARObject , DiagnosticRoutineSubfunction , Identifiable , MultilanguageReferrable , Referrable | | 聚合于 | DiagnosticRoutine.stop |

属性 类型 多重性 种类 备注
request DiagnosticParameter * aggr This represents the request parameters.
response DiagnosticParameter * aggr This represents the response parameters.
Class DiagnosticStopRoutine
request DiagnosticParameter * aggr This represents the request parameters.
response DiagnosticParameter * aggr This represents the response parameters.

表4.86:DiagnosticRequestRoutineResults(DiagnosticRequestRoutineResults)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::CommonDiagnostics | | 说明 | This meta-class represents the ability to define the result of a diagnostic routine execution. | | 基类 | ARObject , DiagnosticRoutineSubfunction , Identifiable , MultilanguageReferrable , Referrable | | 聚合于 | DiagnosticRoutine.requestResult |

属性 类型 多重性 种类 备注
request DiagnosticParameter * aggr This represents the request parameters.
response DiagnosticParameter * aggr This represents the response parameters.

表4.87:DiagnosticRoutineControl(DiagnosticRoutineControl)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::RoutineControl | | 说明 | This represents an instance of the "Routine Control" diagnostic service. Tags: atp.recommendedPackage=DiagnosticRoutineControls | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceInstance , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
routine DiagnosticRoutine 0..1 ref This refers to the applicable DiagnosticRoutine.
routineControl Class DiagnosticRoutine ControlClass 0..1 ref This reference substantiates that abstract reference in the role serviceClass for this specific concrete class. Thereby, the reference represents the ability to access shared attributes among all DiagnosticRoutineControl in the given context.

DiagnosticRoutineControl . routine 的存在性:

表4.88:DiagnosticRoutineControlClass(DiagnosticRoutineControlClass)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::RoutineControl | | 说明 | This meta-class contains attributes shared by all instances of the "Routine Control" diagnostic service. Tags: atp.recommendedPackage=DiagnosticRoutineControls | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceClass , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
Class DiagnosticRoutineControlClass

表4.89:DiagnosticRoutineNeeds(DiagnosticRoutineNeeds)

| 包 | M2::AUTOSARTemplates::CommonStructure::ServiceNeeds | | 说明 | Specifies the general needs on the configuration of the Diagnostic Communication Manager (Dcm) which are not related to a particular item (e.g. a PID). The main use case is the mapping of service ports to the Dcm which are not related to a particular item. | | 基类 | ARObject , DiagnosticCapabilityElement , Identifiable , MultilanguageReferrable , Referrable , Service Needs | | 聚合于 | BswServiceDependency.serviceNeeds, SwcServiceDependency.serviceNeeds |

属性 类型 多重性 种类 备注
diagRoutine Type DiagnosticRoutineType Enum 0..1 attr This denotes the type of diagnostic routine which is implemented by the referenced server port.

| Enumeration | DiagnosticRoutineTypeEnum |

| Package | M2::AUTOSARTemplates::CommonStructure::ServiceNeeds | | Note | This enumerator specifies the different types of diagnostic routines. | | Aggregated by | DiagnosticRoutineNeeds.diagRoutineType | | Literal | Description | | asynchronous | This indicates that the diagnostic server is not blocked while the diagnostic routine is running. Tags: atp.EnumerationLiteralIndex=0 | | synchronous | This indicates that the diagnostic routine blocks the diagnostic server in the ECU while the routine is running. Tags: atp.EnumerationLiteralIndex=1 |

4.3.8.10. DynamicallyDefineDataIdentifier

本章描述诊断服务 DynamicallyDefineDataIdentifier(0x2C)的建模。该服务的目的是允许在运行时定义数据标识符(DID)。

借此可以将现有诊断数据组合成单个 DID。

这一语义反映在元类 DiagnosticDynamicallyDefineDataIdentifier 的建模中,它在角色 dataIdentifier 中引用 DiagnosticDynamicDataIdentifier。

此外,DiagnosticDynamicallyDefineDataIdentifier 从 DiagnosticServiceInstance 继承了对 accessPermission 的引用。

DiagnosticDynamicallyDefineDataIdentifierClass.subfunction 的一致性:

该规则应在 DEXT 完成时施加。

表4.90:DiagnosticDynamicallyDefineDataIdentifier(DiagnosticDynamicallyDefineDataIdentifier)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::DynamicallyDefineDataIdentifier | | 说明 | This represents an instance of the "Dynamically Define Data Identifier" diagnostic service. Tags: atp.recommendedPackage=DiagnosticDynamicallyDefineDataIdentifiers | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceInstance , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
dataIdentifier DiagnosticDynamicData Identifier 0..1 ref This represents the applicable DiagnosticDynamicData Identfier.
dynamically DefineData IdentifierClass DiagnosticDynamically DefineDataIdentifier Class 0..1 ref This reference substantiates that abstract reference in the role serviceClass for this specific concrete class. Thereby, the reference represents the ability to access shared attributes among all DiagnosticDynamicallyDefine DataIdentifier in the given context.
maxSource Element PositiveInteger 0..1 attr This represents the maximum number of source elements of the dynamically created DID.

reference DiagnosticDynamicallyDefineDataIdentifier . dataIdentifier 的存在性:

表4.91:DiagnosticDynamicallyDefineDataIdentifierClass(DiagnosticDynamicallyDefineDataIdentifierClass)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::DynamicallyDefineDataIdentifier | | 说明 | This meta-class contains attributes shared by all instances of the "Dynamically Define Data Identifier" diagnostic service. Tags: atp.recommendedPackage=DiagnosticDynamicallyDefineDataIdentifiers | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceClass , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
checkPer SourceId Boolean 0..1 attr If set to TRUE, the Dcm module shall check the session, security and mode dependencies per source DIDs with a ReadDataByIdentifier (0x22) with DID in the range 0x F200 to 0xF3FF. If set to FALSE. the Dcm module shall not check the session, security and mode dependencies per source DIDs with a ReadDataByIdentifier (0x22) with DID in the range 0xF200 to 0xF3FF.
configuration Handling DiagnosticHandleDDDI ConfigurationEnum 0..1 attr This configuration switch defines whether DDDID definition is handled as non-volatile information or not.
subfunction DiagnosticDynamically DefineDataIdentifier SubfunctionEnum * attr This attribute contains a list of applicable subfunctions for all DiagnosticDynamicallyDefineDataIdentifier that reference the DiagnosticDynamicallyDefineDataIdentifier Class.

| Enumeration | DiagnosticHandleDDDIConfigurationEnum |

| Package | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::DynamicallyDefineData Identifier | | Note | This meta-class represents the options for controlling how the configuration of the DynamicallyDefine DataIdentifiers is done in the given context. | | Aggregated by | DiagnosticDynamicallyDefineDataIdentifierClass.configurationHandling | | Literal | Description | | nonVolatile | This indicates that the configuration of DynamicallyDefineDataIdentifier shall be stored as non-volatile data. Tags: atp.EnumerationLiteralIndex=0 | | volatile | This indicates that the configuration of DynamicallyDefineDataIdentifier shall be handled as volatile data. Tags: atp.EnumerationLiteralIndex=1 |

| Enumeration | DiagnosticDynamicallyDefineDataIdentifierSubfunctionEnum |

| Package | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::DynamicallyDefineData Identifier | | Note | This meta-class contains a list of possible subfunctions for the UDS service 0x2C. | | Aggregated by | DiagnosticDynamicallyDefineDataIdentifierClass.subfunction | | Literal | Description | | clearDynamically DefineDataIdentifier | Clear the specified dynamic data identifier. Tags: atp.EnumerationLiteralIndex=0 | | defineByIdentifier | The definition of dynamic data identifier shall be done via a reference to a diagnostic data identifier. Tags: atp.EnumerationLiteralIndex=1 | | defineByMemory Address | The definition of dynamic data identifier shall be done via a reference to a memory address. Tags: atp.EnumerationLiteralIndex=2 |

4.3.8.11. ReadDataByPeriodicIdentifier

本章描述诊断服务 ReadDataByPeriodicIdentifier(0x2A)的建模。

聚合的 DiagnosticReadDataByPeriodicIDClass.periodicRate 的最大数量:

该规则应在 DEXT 完成时施加。

表4.92:DiagnosticReadDataByPeriodicID(DiagnosticReadDataByPeriodicID)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::ReadDataByPeriodicID | | 说明 | This represents an instance of the "Read Data by periodic Identifier" diagnostic service. Tags: atp.recommendedPackage=DiagnosticReadDataByPeriodicIds |

表4.93:DiagnosticReadDataByPeriodicID(DiagnosticReadDataByPeriodicID)

| 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceInstance , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
readDataClass DiagnosticReadDataBy PeriodicIDClass 0..1 ref This reference substantiates that abstract reference in the role serviceClass for this specific concrete class. Thereby, the reference represents the ability to access shared attributes among all DiagnosticReadDataBy PeriodicID in the given context.

表4.94:DiagnosticReadDataByPeriodicIDClass(DiagnosticReadDataByPeriodicIDClass)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::ReadDataByPeriodicID | | 说明 | This meta-class contains attributes shared by all instances of the "Read Data by periodic Identifier" diagnostic service. Tags: atp.recommendedPackage=DiagnosticReadDataByPeriodicIds | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceClass , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
maxPeriodicDid ToRead PositiveInteger 0..1 attr This represents the maximum number of data identifiers that can be included in one request.
periodicRate DiagnosticPeriodicRate * aggr This represents the description of a collection of periodic rates in which the service can be executed.
schedulerMax Number PositiveInteger 0..1 attr This represents the maximum number of periodic data identifiers that can be scheduled in parallel.

aggregation DiagnosticReadDataByPeriodicIDClass . periodicRate 的存在性:

DiagnosticReadDataByPeriodicIDClass . maxPeriodicDidToRead 属性的存在性:

DiagnosticReadDataByPeriodicIDClass . schedulerMaxNumber 属性的存在性:

表4.95:DiagnosticPeriodicRate(DiagnosticPeriodicRate)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::ReadDataByPeriodicID | | 说明 | This represents the ability to define a periodic rate for the specification of the "read data by periodic ID" diagnostic service. | | 基类 | ARObject | | 聚合于 | DiagnosticReadDataByPeriodicIDClass.periodicRate |

属性 类型 多重性 种类 备注
period TimeValue 0..1 attr This represents the period of the DiagnosticPeriodicRate in seconds.
periodicRate Category DiagnosticPeriodicRate CategoryEnum 0..1 attr This attribute represents the category of the periodic rate.

DiagnosticPeriodicRate . periodicRateCategory 属性的存在性:

| Enumeration | DiagnosticPeriodicRateCategoryEnum |

| Package | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::ReadDataByPeriodicID | | Note | This meta-class provides possible values for the setting of the periodic rate. | | Aggregated by | DiagnosticPeriodicRate.periodicRateCategory | | Literal | Description | | periodicRateFast | This value represents a fast periodic rate. Tags: atp.EnumerationLiteralIndex=0 | | periodicRate Medium | This value represents a medium periodic rate. Tags: atp.EnumerationLiteralIndex=1 | | periodicRateSlow | This value represents a slow periodic rate. Tags: atp.EnumerationLiteralIndex=2 |

DiagnosticPeriodicRateCategoryEnum 中定义的值的含义在相应的 ISO 文档 [17] 中描述。

4.3.8.12. ResponseOnEvent

本章描述诊断服务 ResponseOnEvent(0x86)的建模。该服务的目的是就针对特定事件向测试仪发送响应的启动或停止对 AUTOSAR 诊断栈作出指示。

表4.96:DiagnosticResponseOnEvent(DiagnosticResponseOnEvent)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::ResponseOnEvent | | 说明 | This represents an instance of the "Response on Event" diagnostic service. Tags: atp.recommendedPackage=DiagnosticResponseOnEvents | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceInstance , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
eventWindow DiagnosticEventWindow * aggr This represents the applicable DiagnosticEventWindows
responseOn EventAction DiagnosticResponseOn EventActionEnum 0..1 attr Defines sub-functions of the service ResponseOnEvent.
responseOn EventClass DiagnosticResponseOn EventClass 0..1 ref This reference substantiates that abstract reference in the role serviceClass for this specific concrete class. Thereby, the reference represents the ability to access shared attributes among all DiagnosticResponseOnEvent in the given context.

表4.97:DiagnosticResponseOnEvent(DiagnosticResponseOnEvent)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::ResponseOnEvent | | 说明 | This represents the ability to define common properties for all instances of the "Response on Event" diagnostic service. Tags: atp.recommendedPackage=DiagnosticResponseOnEvents | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceClass Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
Class DiagnosticResponseOnEventClass
maxNumberOf Stored DTCStatus ChangedEvents PositiveInteger 0..1 attr The maximum number of DTCs that can be stored as DTCs with change status within one ResponseOnEvent SchedulerRate interval.
maxNum ChangeOfData IdentfierEvents PositiveInteger 0..1 attr The maximum number of events that can be simultaneously configured with sub function onChangeOf DataIdentifier.
maxNum ComparisionOf ValueEvents PositiveInteger 0..1 attr The maximum number of events that can be simultaneously configured with sub function on ComparisonOfValues.
maxSupported DIDLength PositiveInteger 0..1 attr The maximum number of measurable data bytes allowed for each DID that is used for comparison or data change.
responseOn EventScheduler Rate TimeValue 0..1 attr The call rate of the periodic scheduler to compare the values of the DataIdentifier (DID) or to detect DTC status changes.
storeEvent Enabled Boolean 0..1 attr Specifies if the storeEvent functionality of the Response OnEvent diagnostic service shall be supported or not. If set to true, the storeEvent functionality is available. If set to false the storeEvent functionality is not available.

表4.98:DiagnosticEventWindow(DiagnosticEventWindow)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::ResponseOnEvent | | 说明 | This represents the ability to define the characteristics of the applicable event window | | 基类 | ARObject | | 聚合于 | DiagnosticResponseOnEvent.eventWindow |

属性 类型 多重性 种类 备注
eventWindow Time DiagnosticEventWindow TimeEnum 0..1 attr This attribute clarifies the validity of the eventWindow

| Enumeration | DiagnosticEventWindowTimeEnum |

| Package | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::ResponseOnEvent | | Note | This represents the ability to define the semantics of the event window. | | Aggregated by | DiagnosticEventWindow.eventWindowTime | | Literal | Description | | infiniteTimeTo Response | This value specifies that the event window shall stay active for an infinite amount of time (e.g. open window until power off). Tags: atp.EnumerationLiteralIndex=3 | | powerWindowTime | This enumeration value specifies that the server shall send response on event messages until the server is powered down. The server stops sending response on event messages with the power down and will send no more response on event messages after server is up again. Tags: atp.EnumerationLiteralIndex=4 |

| Enumeration | DiagnosticResponseOnEventActionEnum |

| Package | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::ResponseOnEvent | | Note | This meta-class has the ability to define sub-functions of the UDS service ResponseOnEvent. | | Aggregated by | DiagnosticResponseOnEvent.responseOnEventAction | | Literal | Description | | clear | Clears the configured events. Tags: atp.EnumerationLiteralIndex=2 | | onChangeOfData Identifier | Reports based on change of data identifier. Tags: atp.EnumerationLiteralIndex=6 | | onComparisonOf Values | Triggered if data condition is met (e.g. RPM over 5000 1/min). Tags: atp.EnumerationLiteralIndex=8 | | onDTCStatus Change | Reports based on change of DTC status. Tags: atp.EnumerationLiteralIndex=7 | | report | Reports the activated events. Tags: atp.EnumerationLiteralIndex=3 | | reportDTCRecord InformationOnDtc StatusChange | Reports the DTC record-related information based on a DTC status change. (Subfunction 0x09) Tags: atp.EnumerationLiteralIndex=5 | | reportMostRecent DtcOnStatus Change | Triggers the report of the most recent failed or confirmed DTC (Subfunction 0x08). Tags: atp.EnumerationLiteralIndex=4 | | start | Starts the response on event service. Tags: atp.EnumerationLiteralIndex=1 | | stop | Stops the response on event service. Tags: atp.EnumerationLiteralIndex=0 |

4.3.8.13. ReadDTCInformation

本章描述诊断服务 ReadDTCInformation(0x19)的建模。该服务的目的是使测试仪能够从 AUTOSAR Dcm [11](它又从 AUTOSAR Dem [12] 获取信息)读取诊断故障码。

{重定义 serviceClass}

服务 ReadDTCInformation 的子功能:

这些子功能未被显式建模,但可以通过定义一个 DiagnosticReadDTCInformation 并将 DiagnosticReadDTCInformation.category 设置为相应子功能的标识符来规定。

就 AUTOSAR 标准而言,可能的值由 [TPS_DEXT_01060] 定义。

DiagnosticReadDTCInformation.category 的适用值:

  • REPORT_NUMBER_OF_DTC_BY_STATUS_MASK

  • REPORT_DTC_BY_STATUS_MASK

  • REPORT_NUMBER_OF_EMISSIONS_OBD_DTC_BY_STATUS_MASK

  • REPORT_EMISSIONS_OBD_DTC_BY_STATUS_MASK

  • REPORT_DTC_SNAPSHOT_IDENTIFICATION

  • REPORT_DTC_SNAPSHOT_RECORD_BY_DTC_NUMBER

  • REPORT_DTC_STORED_DATA_BY_RECORD_NUMBER

  • REPORT_DTC_EXT_DATA_RECORD_BY_DTC_NUMBER

  • REPORT_NUMBER_OF_DTC_BY_SEVERITY_MASK_RECORD

  • REPORT_DTC_BY_SEVERITY_MASK_RECORD

  • REPORT_SEVERITY_INFORMATION_OF_DTC

  • REPORT_SUPPORTED_DTC

  • REPORT_FIRST_TEST_FAILED_DTC

  • REPORT_FIRST_CONFIRMED_DTC

  • REPORT_MOST_RECENT_TEST_FAILED_DTC

  • REPORT_MOST_RECENT_CONFIRMED_DTC

  • REPORT_DTC_FAULT_DETECTION_COUNTER

  • REPORT_DTC_WITH_PERMANENT_STATUS

  • REPORT_DTC_EXT_DATA_RECORD_BY_RECORD_NUMBER

  • REPORT_USER_DEF_MEMORY_DTC_BY_STATUS_MASK

  • REPORT_USER_DEF_MEMORY_DTC_SNAPSHOT_RECORD_BY_DTC_NUMBER

  • REPORT_USER_DEF_MEMORY_DTC_EXT_DATA_RECORD_BY_DTC_NUMBER

  • REPORT_WWH_OBD_DTC_BY_MASK_RECORD

  • REPORT_WWH_OBD_DTC_WITH_PERMANENT_STATUS

  • REPORT_SUPPORTED_DTC_EXT_DATA_RECORD

  • REPORT_DTC_INFORMATION_BY_DTC_READINESS_GROUP_IDENTIFIER

这些值的含义在相应的 ISO 文档(ISO 14229-1)[17] 中描述。

请注意,对于 DiagnosticReadDTCInformation,除其存在之外没有可配置的内容。

表4.99:DiagnosticReadDTCInformation(DiagnosticReadDTCInformation)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::ReadDTCInformation | | 说明 | This represents an instance of the "Read DTC Information" diagnostic service. Tags: atp.recommendedPackage=DiagnosticReadDtcInformations | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceInstance , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
read DTCInformation Class DiagnosticReadDTC InformationClass 0..1 ref This reference substantiates that abstract reference in the role serviceClass for this specific concrete class. Thereby, the reference represents the ability to access shared attributes among all DiagnosticRead DTCInformation in the given context.

表4.100:DiagnosticReadDTCInformationClass(DiagnosticReadDTCInformationClass)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::ReadDTCInformation | | 说明 | This meta-class contains attributes shared by all instances of the "ReadDTCInformation" diagnostic service. Tags: atp.recommendedPackage=DiagnosticReadDtcInformations | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceClass , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

4.3.8.14. ClearDiagnosticInformation

本章描述诊断服务 ClearDiagnosticInformation(0x14)的建模。顾名思义,该服务的目的是清除 AUTOSAR 诊断栈中的诊断信息。

请注意,对于 DiagnosticClearDiagnosticInformation,除其存在之外没有可配置的内容。

表4.101:DiagnosticClearDiagnosticInformation(DiagnosticClearDiagnosticInformation)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::ClearDiagnosticInfo | | 说明 | This represents an instance of the "Clear Diagnostic Information" diagnostic service. Tags: atp.recommendedPackage=DiagnosticClearDiagnosticInformations | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceInstance , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
clearDiagnostic Information Class DiagnosticClear DiagnosticInformation Class 0..1 ref This reference substantiates that abstract reference in the role serviceClass for this specific concrete class. Thereby, the reference represents the ability to access shared attributes among all DiagnosticClearDiagnostic Information in the given context.

表4.102:DiagnosticClearDiagnosticInformationClass(DiagnosticClearDiagnosticInformationClass)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::ClearDiagnosticInfo | | 说明 | This meta-class contains attributes shared by all instances of the "Clear Diagnostic Information" diagnostic service. Tags: atp.recommendedPackage=DiagnosticClearDiagnosticInformations | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceClass , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

ClearDiagnosticInformation 不定义任何子功能:

4.3.8.15. 内存服务

本章描述内存访问诊断服务(0x23、0x3D、0x34-0x37)的建模。这些服务的目的是应测试仪的请求访问诊断栈上的内存。

用于诊断目的的内存访问服务描述由抽象元类 DiagnosticMemoryByAddress 建模。它应提供与内存访问相关的所有模型属性。

内存访问的描述在某种程度上需要对要考虑的内存段进行正式描述。为此引入了元类 DiagnosticMemoryIdentifier,并由 DiagnosticMemoryAddressableRangeAccess 在角色 memoryRange 中引用。

这种建模的意图不是提供通用的内存模型,而是允许就诊断所涉及的范围规定内存属性。

在 DiagnosticMemoryByAddress 处聚合 DiagnosticMemoryIdentifier 对 OEM 可能相关也可能不相关。但是,将这一信息添加到从一级供应商返回给 OEM 的 DiagnosticExtract 中,作为诊断配置的某种文档,确实存在用例。

由于 DiagnosticMemoryByAddress 表示所有类型诊断内存访问的通用基类,还需要对针对诊断内存访问特定用例的具体子类建模。

这些子类在概念上与其他 DiagnosticServiceInstance 子类处于同一层级。

换言之,内存访问的情形偏离了其他诊断服务的建模,涉及又一个抽象基类。

attributes of meta-class DiagnosticMemoryIdentifier 的存在性:

  • memoryLowAddress

  • memoryLowAddressLabel

  • memoryHighAddress

  • memoryHighAddressLabel

  • accessPermission

对于被引用的 DiagnosticMemoryIdentifier,在 DEXT 完成时不应存在。

DiagnosticMemoryIdentifier . memoryHighAddressLabel vs. DiagnosticMemoryIdentifier . memoryHighAddress 属性的存在性:

  • DiagnosticMemoryIdentifier.memoryHighAddressLabel

  • DiagnosticMemoryIdentifier.memoryHighAddress

DiagnosticMemoryIdentifier . memoryLowAddressLabel vs. DiagnosticMemoryIdentifier . memoryLowAddress 的存在性:

  • DiagnosticMemoryIdentifier.memoryLowAddressLabel

  • DiagnosticMemoryIdentifier.memoryLowAddress

请注意,在此上下文中同时以数值和符号方式描述内存地址没有意义。如果地址有描述(见 [constr_1333]),则应以符号方式或数值方式进行。这就是 [constr_1411] 和 [constr_1412] 存在的动机。

表4.103:DiagnosticMemoryByAddress(DiagnosticMemoryByAddress)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::MemoryByAddress | | 说明 | This represents an abstract base class for diagnostic services that deal with accessing memory by address. | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceInstance , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 子类 | DiagnosticDataTransfer, DiagnosticMemoryAddressableRangeAccess , DiagnosticTransferExit | | 聚合于 | ARPackage.element | | 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::MemoryByAddress | | 说明 | This abstract base class | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMemoryByAddress , DiagnosticServiceInstance , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 子类 | DiagnosticReadMemoryByAddress, DiagnosticRequestDownload, DiagnosticRequestUpload, Diagnostic WriteMemoryByAddress | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
Class DiagnosticMemoryAddressableRangeAccess (abstract)
memoryRange DiagnosticMemory Identifier * ref This represents the formal description of the memory segment to which the DiagnosticMemoryByAddress applies.

表4.104:DiagnosticMemoryAddressableRangeAccess(DiagnosticMemoryAddressableRangeAccess)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::MemoryByAddress | | 说明 | This meta-class represents the ability to define memory properties from the diagnostics point of view. Tags: atp.recommendedPackage=DiagnosticMemoryByAdresss | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
access Permission DiagnosticAccess Permission 0..1 ref This represents that access permission defined for the specific DiagnosticMemoryIdentifier. Stereotypes: atpSplitable Tags: atp.Splitkey=accessPermission
id PositiveInteger 0..1 attr This represents the identification of the memory segment.
memoryHigh Address PositiveInteger 0..1 attr This represents the upper bound for addresses of the memory segment.
memoryHigh AddressLabel String 0..1 attr This represents a symbolic label for the upper bound for addresses of the memory segment.
memoryLow Address PositiveInteger 0..1 attr This represents the lower bound for addresses of the memory segment.
memoryLow AddressLabel String 0..1 attr This represents a symbolic label for the lower bound for addresses of the memory segment.

表4.105:DiagnosticMemoryIdentifier(DiagnosticMemoryIdentifier)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::MemoryByAddress | | 说明 | This represents an instance of the "Write Memory by Address" diagnostic service. Tags: atp.recommendedPackage=DiagnosticMemoryByAdresss | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMemory AddressableRangeAccess , DiagnosticMemoryByAddress , DiagnosticServiceInstance , Identifiable MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

表4.106:DiagnosticWriteMemoryByAddress(DiagnosticWriteMemoryByAddress)

属性 类型 多重性 种类 备注
writeClass DiagnosticWriteMemory ByAddressClass 0..1 ref This reference substantiates that abstract reference in the role serviceClass for this specific concrete class. Thereby, the reference represents the ability to access shared attributes among all DiagnosticWritememoryBy Address in the given context.

表4.107:DiagnosticWriteMemoryByAddressClass(DiagnosticWriteMemoryByAddressClass)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::MemoryByAddress | | 说明 | This meta-class contains attributes shared by all instances of the "Write Memory by Address" diagnostic service. Tags: atp.recommendedPackage=DiagnosticMemoryByAdresss | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceClass , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

WriteMemoryByAddress 不定义任何子功能:

表4.108:DiagnosticReadMemoryByAddress(DiagnosticReadMemoryByAddress)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::MemoryByAddress | | 说明 | This represents an instance of the "Read Memory by Address" diagnostic service. Tags: atp.recommendedPackage=DiagnosticMemoryByAdresss | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMemory AddressableRangeAccess , DiagnosticMemoryByAddress , DiagnosticServiceInstance , Identifiable MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

表4.109:DiagnosticReadMemoryByAddress(DiagnosticReadMemoryByAddress)

属性 类型 多重性 种类 备注
readClass DiagnosticReadMemory ByAddressClass 0..1 ref This reference substantiates that abstract reference in the role serviceClass for this specific concrete class. Thereby, the reference represents the ability to access shared attributes among all DiagnosticReadMemoryBy Addresst in the given context.

表4.110:DiagnosticReadMemoryByAddressClass(DiagnosticReadMemoryByAddressClass)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::MemoryByAddress | | 说明 | This meta-class contains attributes shared by all instances of the "Read Memory by Address" diagnostic service. Tags: atp.recommendedPackage=DiagnosticMemoryByAdresss | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceClass , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

ReadMemoryByAddress 不定义任何子功能:

表4.111:DiagnosticTransferExit(DiagnosticTransferExit)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::MemoryByAddress | | 说明 | This represents an instance of the "Transfer Exit" diagnostic service. Tags: atp.recommendedPackage=DiagnosticMemoryByAdresss | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMemoryByAddress DiagnosticServiceInstance , Identifiable , MultilanguageReferrable , PackageableElement | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
Class DiagnosticTransferExit
transferExit Class DiagnosticTransferExit Class 0..1 ref This reference substantiates that abstract reference in the role serviceClass for this specific concrete class. Thereby, the reference represents the ability to access shared attributes among all DiagnosticTransferExit in the given context.

表4.112:DiagnosticTransferExitClass(DiagnosticTransferExitClass)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::MemoryByAddress | | 说明 | This meta-class contains attributes shared by all instances of the "Transfer Exit" diagnostic service. Tags: atp.recommendedPackage=DiagnosticMemoryByAdresss | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceClass , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

TransferExit 不定义任何子功能:

表4.113:DiagnosticDataTransfer(DiagnosticDataTransfer)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::MemoryByAddress | | 说明 | This represents an instance of the "Data Transfer" diagnostic service. Tags: atp.recommendedPackage=DiagnosticMemoryByAdresss | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMemoryByAddress , DiagnosticServiceInstance , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
dataTransfer Class DiagnosticDataTransfer Class 0..1 ref This reference substantiates that abstract reference in the role serviceClass for this specific concrete class. Thereby, the reference represents the ability to access shared attributes among all DiagnosticDataTransfer in the given context.

表4.114:DiagnosticDataTransferClass(DiagnosticDataTransferClass)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::MemoryByAddress | | 说明 | This meta-class contains attributes shared by all instances of the "Data Transfer" diagnostic service. Tags: atp.recommendedPackage=DiagnosticMemoryByAdresss | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceClass Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

DataTransfer 不定义任何子功能:

表4.115:DiagnosticRequestDownload(DiagnosticRequestDownload)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::MemoryByAddress | | 说明 | This represents an instance of the "Request Download" diagnostic service. Tags: atp.recommendedPackage=DiagnosticMemoryByAdresss | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMemory AddressableRangeAccess , DiagnosticMemoryByAddress , DiagnosticServiceInstance , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
request DownloadClass DiagnosticRequest DownloadClass 0..1 ref This reference substantiates that abstract reference in the role serviceClass for this specific concrete class. Thereby, the reference represents the ability to access shared attributes among all DiagnosticRequestDownload in the given context.

表4.116:DiagnosticRequestDownload(DiagnosticRequestDownload)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::MemoryByAddress | | 说明 | This meta-class contains attributes shared by all instances of the "Request Download" diagnostic service. Tags: atp.recommendedPackage=DiagnosticMemoryByAdresss | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceClass , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

表4.117:DiagnosticRequestDownloadClass(DiagnosticRequestDownloadClass)

RequestDownload 不定义任何子功能:

表4.118:DiagnosticRequestUpload(DiagnosticRequestUpload)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::MemoryByAddress | | 说明 | This represents an instance of the "Request Upload" diagnostic service. Tags: atp.recommendedPackage=DiagnosticMemoryByAdresss | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMemory AddressableRangeAccess , DiagnosticMemoryByAddress , DiagnosticServiceInstance , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
requestUpload Class DiagnosticRequest UploadClass 0..1 ref This reference substantiates that abstract reference in the role serviceClass for this specific concrete class. Thereby, the reference represents the ability to access shared attributes among all DiagnosticRequestUpload in the given context.

表4.119:DiagnosticRequestUploadClass(DiagnosticRequestUploadClass)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::MemoryByAddress | | 说明 | This meta-class contains attributes shared by all instances of the "Request Upload" diagnostic service. Tags: atp.recommendedPackage=DiagnosticMemoryByAdresss | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceClass Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

RequestUpload 不定义任何子功能:

4.3.8.16. RequestFileTransfer

本章描述诊断服务 RequestFileTransfer(0x38)的建模。该服务的目的是触发从 AUTOSAR 诊断栈传输文件或向其传输文件。

请注意,对于 DiagnosticRequestFileTransfer,除其存在之外没有可配置的内容。

诊断服务 RequestFileTransfer 不定义任何子功能:

表4.120:DiagnosticRequestFileTransfer(DiagnosticRequestFileTransfer)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::RequestFileTransfer | | 说明 | This diagnostic service instance implements the UDS service 0x38. |

属性 类型 多重性 种类 备注
Tags: atp.recommendedPackage=DiagnosticRequestFileTransfers

表4.121:DiagnosticRequestFileTransfer(DiagnosticRequestFileTransfer)

| 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceInstance , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
requestFile TransferClass DiagnosticRequestFile TransferClass 0..1 ref This reference substantiates that abstract reference in the role serviceClass for this specific concrete class. Thereby, the reference represents the ability to access shared attributes among all DiagnosticRequestFile Transfer in the given context.

表4.122:DiagnosticRequestFileTransferClass(DiagnosticRequestFileTransferClass)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::DiagnosticService::RequestFileTransfer | | 说明 | This meta-class contains attributes shared by all instances of the "Request File transfer" diagnostic service. Tags: atp.recommendedPackage=DiagnosticRequestFileTransfers | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceClass Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

4.3.9. AUTOSAR 支持的 OBD 诊断服务

对车载诊断(OBD)[19] 诊断服务的支持需要定义进一步的元类,类似于例如 DiagnosticDataIdentifier 或 DiagnosticRoutine。

DiagnosticParameterIdentifier 的语义:

  • 每个 DiagnosticParameterIdentifier 获得一个由属性 DiagnosticParameterIdentifier.id 携带的数字 ID。

  • DiagnosticParameterIdentifier 还可以包含一个所谓的支持信息字节(Support Info Byte),建模为 DiagnosticSupportInfoByte。

  • DiagnosticParameterIdentifier 的定义还包含与该 PID 关联的数据列表。该列表建模为 DiagnosticParameter 的聚合。

如 [TPS_DEXT_01092] 中已经提到的,不应将 DiagnosticParameterIdentifier 与 DiagnosticParameter 混淆。后者在 DiagnosticParameterIdentifier 的定义 “内部” 使用,也在 DiagnosticDataIdentifier 或 DiagnosticRoutine 中使用,以定义 DiagnosticParameterIdentifier 范围内保存的一段(可能许多段中的一段)信息。

DiagnosticParameterIdentifier.id 值的限制:

该规则应在 DEXT 完成时施加。

DiagnosticParameterIdentifier.id 的区间:

关于角色 DiagnosticParameterIdentifier.dataElement 的限制:

该规则应在 DEXT 完成时施加。

[constr_10370] 的依据是:在 DiagnosticParameterIdentifier 上下文中 DiagnosticParameter 的使用通常限于少数原始值,不需要嵌套的结构化 DiagnosticParameter。

PID 应只携带固定长度的数据集合:

该规则应在 DEXT 完成时施加。

DiagnosticParameterIdentifier . pidSize 属性的存在性:

在 DiagnosticParameterIdentifier 的结尾存在间隙。如果该间隙不存在,则可以计算 DiagnosticParameterIdentifier 的大小。

该规则应在 DEXT 完成时施加。

表4.123:DiagnosticParameterIdentifier(DiagnosticParameterIdentifier)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::CommonDiagnostics | | 说明 | This meta-class represents the ability to model a diagnostic parameter identifier (PID) for the purpose of executing on-board diagnostics (OBD). Tags: atp.recommendedPackage=DiagnosticParameterIdentifiers | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
dataElement DiagnosticParameter * aggr This represents the data carried by the Diagnostic ParameterIdentifier. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=dataElement.bitOffset, data Element.ident.shortName, dataElement.variation Point.shortLabel vh.latestBindingTime=postBuild
id PositiveInteger 0..1 attr This is the numerical identifier used to identify the DiagnosticParameterIdentifier in the scope of diagnostic workflow (see SAE J1979-DA).
pidSize PositiveInteger 0..1 attr The size of the entire PID can be greater than the sum of the data elements because padding might be applied. Unit: byte.
supportInfoByte DiagnosticSupportInfo Byte 0..1 aggr This represents the supported information associated with the DiagnosticParameterIdentifier.

DiagnosticParameterIdentifier . id 属性的存在性:

表4.124:DiagnosticParameterSupportInfo(DiagnosticParameterSupportInfo)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::CommonDiagnostics | | 说明 | This represents a way to define which bit of the supportInfo is representing this part of the PID | | 基类 | ARObject | | 聚合于 | DiagnosticParameter.supportInfo |

属性 类型 多重性 种类 备注
supportInfoBit PositiveInteger 0..1 attr defines the bit in the SupportInfo byte, which represents the PID DataElement pidSize / position / size. Unit: byte.

表4.125:DiagnosticSupportInfoByte(DiagnosticSupportInfoByte)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::CommonDiagnostics | | 说明 | This meta-class defines the support information (typically byte A) to declare the usability of the Data Elements within the so-called packeted PIDs (e.g. PID$68). | | 基类 | ARObject | | 聚合于 | DiagnosticDataIdentifier.supportInfoByte, DiagnosticParameterIdentifier.supportInfoByte |

属性 类型 多重性 种类 备注
position PositiveInteger 0..1 attr This represents the position of the supportInfo in the PID. Unit: byte.
size PositiveInteger 0..1 attr This represents the size of the supportInfo within the PID. Unit: byte.
4.3.9.1. OBD 模式 0x01(RequestCurrentPowertrainDiagnosticData)

服务 RequestCurrentPowertrainDiagnosticData 在图 4.46 中建模。

对诊断服务 RequestCurrentPowertrainDiagnosticData 的支持:

表4.126:DiagnosticRequestCurrentPowertrainData(DiagnosticRequestCurrentPowertrainData)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::ObdService::Mode_0x01_RequestCurrentPowertrain DiagnosticData | | 说明 | This meta-class represents the ability to model an instance of the OBD mode 0x01 service. Tags: atp.recommendedPackage=DiagnosticRequestCurrentPowertrainDatas | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceInstance Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

表4.127:DiagnosticRequestCurrentPowertrainData(DiagnosticRequestCurrentPowertrainData)

属性 类型 多重性 种类 备注
pid DiagnosticParameter Identifier 0..1 ref This represents the PID associated with this instance of the OBD mode 0x01 service.
requestCurrent Powertrain DiagnosticData Class DiagnosticRequest CurrentPowertrainData Class 0..1 ref This reference substantiates that abstract reference in the role serviceClass for this specific concrete class. Thereby, the reference represents the ability to access shared attributes among all DiagnosticRequestCurrent PowertrainData in the given context.

reference DiagnosticRequestCurrentPowertrainData . pid 的存在性:

表4.128:DiagnosticRequestCurrentPowertrainDataClass(DiagnosticRequestCurrentPowertrainDataClass)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::ObdService::Mode_0x01_RequestCurrentPowertrain DiagnosticData | | 说明 | This meta-class represents the ability to define common properties for all instances of the "Request current Powertrain Data" OBD diagnostic service. Tags: atp.recommendedPackage=DiagnosticRequestCurrentPowertrainDatas | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceClass , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

4.3.9.2. OBD 模式 0x02(RequestPowertrainFreezeFrameData)

服务 RequestPowertrainFreezeFrameData 在图 4.47 中建模。

对 OBD 服务 RequestPowertrainFreezeFrameData 的支持:

表4.129:DiagnosticRequestPowertrainFreezeFrameData(DiagnosticRequestPowertrainFreezeFrameData)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::ObdService::Mode_0x02_RequestPowertrainFreeze FrameData | | 说明 | This meta-class represents the ability to model an instance of the OBD mode 0x02 service. Tags: atp.recommendedPackage=DiagnosticPowertrainFreezeFrames | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceInstance , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
freezeFrame DiagnosticPowertrain FreezeFrame 0..1 ref This represents the associated freeze-frame.
request Powertrain FreezeFrame Data DiagnosticRequest PowertrainFreezeFrame DataClass 0..1 ref This reference substantiates that abstract reference in the role serviceClass for this specific concrete class. Thereby, the reference represents the ability to access shared attributes among all DiagnosticRequestPowertrain FreezeFrameData in the given context.

reference DiagnosticRequestPowertrainFreezeFrameData . freezeFrame 的存在性:

表4.130:DiagnosticRequestPowertrainFreezeFrameDataClass(DiagnosticRequestPowertrainFreezeFrameDataClass)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::ObdService::Mode_0x02_RequestPowertrainFreeze FrameData | | 说明 | This meta-class represents the ability to define common properties for all instances of the "Request Powertrain Freeze Frame Data" OBD diagnostic service. Tags: atp.recommendedPackage=DiagnosticPowertrainFreezeFrames | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceClass , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

表4.131:DiagnosticPowertrainFreezeFrame(DiagnosticPowertrainFreezeFrame)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::ObdService::Mode_0x02_RequestPowertrainFreeze FrameData | | 说明 | This meta-class represents a powertrain-related freeze-frame. In theory, this meta-class would need an additional id attribute. However, legal regulations requires only a single value for this attribute anyway. Tags: atp.recommendedPackage=DiagnosticPowertrainFreezeFrames | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
pid DiagnosticParameter Identifier * ref This represents the PID associated with this instance of the OBD mode 0x02 service.
4.3.9.3. OBD 模式 0x03 / 0x07(RequestEmissionRelatedDiagnosticTroubleCodes)

DiagnosticRequestEmissionRelatedDTC 的语义:

该建模勾勒于图 4.48。

表4.132:DiagnosticRequestEmissionRelatedDTC(DiagnosticRequestEmissionRelatedDTC)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::ObdService::Mode_0x03_0x07_RequestEmission RelatedDTC | | 说明 | This meta-class represents the ability to model an instance of the OBD mode 0x03/0x07 Tags: atp.recommendedPackage=DiagnosticRequestEmissionRelatedDTCs | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceInstance Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

表4.133:DiagnosticRequestEmissionRelatedDTC(DiagnosticRequestEmissionRelatedDTC)

属性 类型 多重性 种类 备注
request Emission RelatedDtc Class DiagnosticRequest EmissionRelatedDTC Class 0..1 ref This reference substantiates that abstract reference in the role serviceClass for this specific concrete class. Thereby, the reference represents the ability to access shared attributes among all DiagnosticRequestEmission RelatedDTC in the given context.

表4.134:DiagnosticRequestEmissionRelatedDTCClass(DiagnosticRequestEmissionRelatedDTCClass)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::ObdService::Mode_0x03_0x07_RequestEmission RelatedDTC | | 说明 | This meta-class represents the ability to define common properties for all instances of the "Request Emission Related DTC" OBD diagnostic service. Tags: atp.recommendedPackage=DiagnosticRequestEmissionRelatedDTCs | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceClass , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

4.3.9.4. OBD 模式 0x04(ClearResetEmissionRelatedDiagnosticInformation)

DiagnosticClearResetEmissionRelatedInfo 的语义:

该建模勾勒于图 4.49。

表4.135:DiagnosticClearResetEmissionRelatedInfo(DiagnosticClearResetEmissionRelatedInfo)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::ObdService::Mode_0x04_ClearResetEmission RelatedInfo | | 说明 | This meta-class represents the ability to model an instance of the OBD mode 0x04 service. Tags: atp.recommendedPackage=DiagnosticClearResetEmissionRelatedInfos | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceInstance , Identifiable , MultilanguageReferrable , PackageableElement , Referrable |

表4.136:DiagnosticClearResetEmissionRelatedInfo(DiagnosticClearResetEmissionRelatedInfo)

| 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
clearReset Emission Related DiagnosticInfo Class DiagnosticClearReset EmissionRelatedInfo Class 0..1 ref This reference substantiates that abstract reference in the role serviceClass for this specific concrete class. Thereby, the reference represents the ability to access shared attributes among all DiagnosticClearReste EmissionRelatedInfo in the given context.

表4.137:DiagnosticClearResetEmissionRelatedInfoClass(DiagnosticClearResetEmissionRelatedInfoClass)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::ObdService::Mode_0x04_ClearResetEmission RelatedInfo | | 说明 | This meta-class represents the ability to define common properties for all instances of the "Clear Reset Emission Related Data" OBD diagnostic service. Tags: atp.recommendedPackage=DiagnosticClearResetEmissionRelatedInfos | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceClass , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

4.3.9.5. OBD 模式 0x06(RequestOnBoardMonitoringTestResults)

对 OBD 诊断服务 RequestOnBoardMonitoringTestResults 的支持:

该建模勾勒于图 4.50。

一般而言,模式 0x06 支持从给定服务器查询支持的测试标识符。但该功能在 AUTOSAR 中不受支持,因此存在 [constr_1462]。

DiagnosticTestResult.testIdentifier.id 值的限制:

该规则应在 DEXT 完成时施加。

测试结果集合的定义:

为此,DiagnosticRequestOnBoardMonitoringTestResults 应在角色 diagnosticTestResult 中引用多个 DiagnosticTestResult,而后者又在角色 monitoredIdentifier 中引用相同的 DiagnosticMeasurementIdentifier(作为诊断提取下游处理中相关测试结果的标识)。

表4.138:DiagnosticRequestOnBoardMonitoringTestResults(DiagnosticRequestOnBoardMonitoringTestResults)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::ObdService::Mode_0x06_RequestOnBoard MonitoringTestResults | | 说明 | This meta-class represents the ability to model an instance of the OBD mode 0x06 service. Tags: atp.recommendedPackage=DiagnosticRequestOnBoardMonitoringTestResultss | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceInstance , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
diagnosticTest Result DiagnosticTestResult * ref This reference identifies the applicable collection of test identifiers for setting up a request message for mode 0x06.
requestOn Board MonitoringTest ResultsClass DiagnosticRequestOn BoardMonitoringTest ResultsClass 0..1 ref This reference substantiates that abstract reference in the role serviceClass for this specific concrete class. Thereby, the reference represents the ability to access shared attributes among all DiagnosticRequestOnBoard MonitoringTestResults in the given context.

表4.139:DiagnosticRequestOnBoardMonitoringTestResults(DiagnosticRequestOnBoardMonitoringTestResults)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::ObdService::Mode_0x06_RequestOnBoard MonitoringTestResults | | 说明 | This meta-class represents the ability to define common properties for all instances of the "Request On-Board Monitoring Test Results" OBD diagnostic service. Tags: atp.recommendedPackage=DiagnosticRequestOnBoardMonitoringTestResultss | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceClass , Identifiable , MultilanguageReferrable , PackageableElement , Referrable |

表4.140:DiagnosticRequestOnBoardMonitoringTestResultsClass(DiagnosticRequestOnBoardMonitoringTestResultsClass)

| 聚合于 | ARPackage.element |

4.3.9.6. OBD 模式 0x08(RequestControlOfOnBoardDevice)

对 OBD 诊断服务 RequestControlOfOnBoardDevice 的支持:

该建模勾勒于图 4.51。

一般而言,模式 0x06 支持从给定服务器查询支持的测试例程标识符。但该功能在 AUTOSAR 中不受支持,因此存在 [constr_1461]。

DiagnosticTestRoutineIdentifier.id 值的限制:

该规则应在 DEXT 完成时施加。

表4.141:DiagnosticRequestControlOfOnBoardDevice(DiagnosticRequestControlOfOnBoardDevice)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::ObdService::Mode_0x08_RequestControlOfOnBoard Device | | 说明 | This meta-class represents the ability to model an instance of the OBD mode 0x08 service. Tags: atp.recommendedPackage=DiagnosticRequestControlOfOnBoardDevices | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceInstance , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
requestControl OfOnBoard DeviceClass DiagnosticRequest ControlOfOnBoard DeviceClass 0..1 ref This reference substantiates that abstract reference in the role serviceClass for this specific concrete class. Thereby, the reference represents the ability to access shared attributes among all DiagnosticRequestControlOf OnBoardDevice in the given context.
testId DiagnosticTestRoutine Identifier 0..1 ref This represents the test Id for the mode 0x08.

reference DiagnosticRequestControlOfOnBoardDevice . testId 的存在性:

角色 testId 中对 DiagnosticParameterIdentifier 的引用应在 DEXT 完成时存在。

表4.142:DiagnosticRequestControlOfOnBoardDeviceClass(DiagnosticRequestControlOfOnBoardDeviceClass)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::ObdService::Mode_0x08_RequestControlOfOnBoard Device | | 说明 | This meta-class represents the ability to define common properties for all instances of the "Request Control Of On-Board Device" OBD diagnostic service. Tags: atp.recommendedPackage=DiagnosticRequestControlOfOnBoardDevices | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceClass Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

表4.143:DiagnosticTestRoutineIdentifier(DiagnosticTestRoutineIdentifier)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::ObdService::Mode_0x08_RequestControlOfOnBoard Device | | 说明 | This represents the test id of the DiagnosticTestIdentifier. Tags: atp.recommendedPackage=DiagnosticTestRoutineIdentifier | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
id PositiveInteger 0..1 attr This represents the numerical id of the DiagnosticTest Identifier (see SAE J1979-DA).
requestData Size PositiveInteger 0..1 attr This represents the specified data size for the request message. Unit: byte.
responseData Size PositiveInteger 0..1 attr This represents the specified data size for the response message. Unit:byte.

DiagnosticTestRoutineIdentifier . id 属性的存在性:

DiagnosticTestRoutineIdentifier . requestDataSize 属性的存在性:

DiagnosticTestRoutineIdentifier . responseDataSize 属性的存在性:

4.3.9.7. OBD 模式 0x09(RequestVehicleInformation)

对 OBD 诊断服务 RequestVehicleInformation 的支持:

该建模勾勒于图 4.52。

DiagnosticInfoType.id 值的限制:

该规则应在 DEXT 完成时施加。

DiagnosticInfoType . dataElement 的存在性:

表4.144:DiagnosticRequestVehicleInfo(DiagnosticRequestVehicleInfo)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::ObdService::Mode_0x09_RequestVehicleInformation | | 说明 | This meta-class represents the ability to model an instance of the OBD mode 0x09 service. Tags: atp.recommendedPackage=DiagnosticRequestVehicleInfos | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceInstance , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
infoType DiagnosticInfoType 0..1 ref This represents the info type associated with the mode 0x09 service.
requestVehicle Information Class DiagnosticRequest VehicleInfoClass 0..1 ref This reference substantiates that abstract reference in the role serviceClass for this specific concrete class. Thereby, the reference represents the ability to access shared attributes among all DiagnosticRequesVehicleInfo in the given context.

reference DiagnosticRequestVehicleInfo . infoType 的存在性:

表4.145:DiagnosticRequestVehicleInfoClass(DiagnosticRequestVehicleInfoClass)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::ObdService::Mode_0x09_RequestVehicleInformation | | 说明 | This meta-class represents the ability to define common properties for all instances of the "Request Vehicle Info" OBD diagnostic service. Tags: atp.recommendedPackage=DiagnosticRequestVehicleInfos | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceClass , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

表4.146:DiagnosticInfoType(DiagnosticInfoType)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::CommonDiagnostics | | 说明 | This meta-class represents the ability to model an OBD info type. Tags: atp.recommendedPackage=DiagnosticInfoTypes | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
dataElement DiagnosticParameter * aggr This represents the data associated with the enclosing DiagnosticInfoType. Stereotypes: atpSplitable Tags: atp.Splitkey=dataElement.bitOffset, data Element.ident.shortName
id PositiveInteger 0..1 attr This attribute represents the value of InfoType (see SAE J1979-DA).

DiagnosticInfoType . id 属性的存在性:

4.3.9.8. OBD 模式 0x0A(RequestEmissionRelatedDiagnosticTroubleCodesPermanentStatus)

对 OBD 诊断服务 RequestEmissionRelatedDiagnosticTroubleCodesPermanentStatus 的支持:

该建模勾勒于图 4.54。

表4.147:DiagnosticRequestEmissionRelatedDTCPermanentStatus(DiagnosticRequestEmissionRelatedDTCPermanentStatus)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::ObdService::Mode_0x0A_RequestEmissionRelated DTCPermanentStatus | | 说明 | This meta-class represents the ability to model an instance of the OBD mode 0x0A service. Tags: atp.recommendedPackage=DiagnosticRequestEmissionRelatedDTCPermanentStatuss | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceInstance , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
request Emission RelatedDtc Class Permanent Status DiagnosticRequest EmissionRelatedDTC PermanentStatusClass 0..1 ref This reference substantiates that abstract reference in the role serviceClass for this specific concrete class. Thereby, the reference represents the ability to access shared attributes among all DiagnosticRequestEmission RelatedDTCPermanentStatus in the given context.

表4.148:DiagnosticRequestEmissionRelatedDTCPermanentStatus(DiagnosticRequestEmissionRelatedDTCPermanentStatus)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dcm::ObdService::Mode_0x0A_RequestEmissionRelated DTCPermanentStatus | | 说明 | This meta-class represents the ability to define common properties for all instances of the "Request Emission Related DTC Permanent Status" OBD diagnostic service. Tags: atp.recommendedPackage=DiagnosticRequestEmissionRelatedDTCPermanentStatuss |

表4.149:DiagnosticRequestEmissionRelatedDTCPermanentStatusClass(DiagnosticRequestEmissionRelatedDTCPermanentStatusClass)

| 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticServiceClass , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

4.3.10. 支持 WWH-OBD 的 UDS 诊断服务

诊断提取内对 WWH-OBD 的支持:

DiagnosticReadDataByIdentifier(0x22),其中属性 DiagnosticDataIdentifier.id 的值位于 OBD 范围定义的区间内,即:

  • F400-F4FF

  • F600-F6FF

  • F800-F8FF

请注意,在 WWH-OBD 的实现中使用该诊断服务对应于与该诊断服务交互的 AtomicSwComponentType 一侧存在 DiagnosticValueNeeds。

  • DiagnosticRoutineControl(0x31),其中属性 DiagnosticRoutine.id 的值位于 OBD 范围定义的区间内,即 E000-E0FF。请注意,在 WWH-OBD 的实现中使用该诊断服务对应于实现在诊断服务内执行的例程的 AtomicSwComponentType 一侧存在 DiagnosticRoutineNeeds。

DiagnosticClearDiagnosticInformation(0x14)

带子功能(0x4、0x6、0x42)的 DiagnosticReadDTCInformation(0x19)

在 WWH-OBD 环境中使用时,元类 DiagnosticRoutine 利用属性 routineInfo 支持诊断响应的配置。在纯 UDS 环境中(除 ISO 26021 [18] 的应用外),该属性没有语义。

4.4. 诊断事件处理

4.4.1. 简介

本子章描述定义诊断事件的处理及其相关功能的元模型元素。

在标准的 AUTOSAR 基础软件架构中,基于本子章所述模型元素的定义由诊断事件管理器(Dem)模块实现。

下图给出与诊断事件功能相关的模型元素的概览。

为定义诊断事件功能,若干模型元素派生自 DiagnosticCommonElement。这些元素在以下子章中描述。

4.4.2. DiagnosticEvent

4.4.2.1. 概述

DiagnosticEvent 的语义:

图 4.56 描绘了 DiagnosticEvent 的定义及其属性。

DiagnosticExtract 允许定义任意数量的 DiagnosticEvent。

虽然公司之间交换 DiagnosticExtract 通常涉及与 SWC 功能相关的 DiagnosticEvent,但也支持事件种类 BSW,以便能够定义 BSW 事件的处理(例如相关 DiagnosticTroubleCode 的定义)。

DiagnosticEvent 的清除请求:

对这个回调接口的期望可以使用属性 eventClearAllowed 表达:

  • always 表示对 DiagnosticEvent 的清除请求应无条件执行。

  • requiresCallbackExecution 的情况下,由回调的执行决定是否允许清除。

换言之,这一决定的实现取决于相应 AtomicSwComponentType 的开发者。

后者应定义一个带有适当 DiagnosticEventNeeds 的 SwcServiceDependency 和一个 RoleBasedPortAssignment,其中属性 role 的值设置为 CallbackClearEventAllowed。

表4.150:DiagnosticEvent(DiagnosticEvent)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticEvent | | 说明 | This element is used to configure DiagnosticEvents. |

属性 类型 多重性 种类 备注
Tags: atp.recommendedPackage=DiagnosticEvents

表4.151:DiagnosticEvent(DiagnosticEvent)

| 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
associated Event Identification PositiveInteger 0..1 attr This attribute represents the identification number that is associated with the enclosing DiagnosticEvent and allows to identify it when placed into a snapshot record or extended data record storage. This value can be reported as internal data element in snapshot records or extended data records.
clearEvent Allowed Behavior DiagnosticClearEvent AllowedBehaviorEnum 0..1 attr This attribute defines the resulting UDS status byte for the related event, which shall not be cleared according to the ClearEventAllowed callback
confirmation Threshold PositiveInteger 0..1 attr This attribute defines the number of operation cycles with a failed result before a confirmed DTC is set to 1. The semantic of this attribute is a by "1" increased value compared to the confirmation threshold of the "trip counter" mentioned in ISO 14229-1 in figure D.4. A value of "1" defines the immediate confirmation of the DTC along with the first reported failed. This is also sometimes called "zero trip DTC". A value of "2" defines a DTC confirmation in the operation cycle after the first occurred failed. A value of "2" is typically used in the US for OBD DTC confirmation. Stereotypes: atpVariation Tags: vh.latestBindingTime=preCompileTime
connected Indicator DiagnosticConnected Indicator * aggr Event specific description of Indicators. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=connectedIndicator.shortName, connected Indicator.variationPoint.shortLabel vh.latestBindingTime=postBuild
eventClear Allowed DiagnosticEventClear AllowedEnum 0..1 attr This attribute defines whether the Dem has access to a "ClearEventAllowed" callback.
eventKind DiagnosticEventKind Enum 0..1 attr This attribute is used to distinguish between SWC and BSW events.
prestorage FreezeFrame Boolean 0..1 attr This attribute describes whether the Prestorage of Freeze Frames is supported by the assigned event or not. true: Prestorage of FreezeFrames is supported fFalse: Prestorage of FreezeFrames is not supported
prestored Freezeframe StoredInNvm Boolean 0..1 attr If the Event uses a prestored freeze-frame (using the operations PrestoreFreezeFrame and ClearPrestored FreezeFrame of the service interface DiagnosticMonitor) this attribute indicates if the Event requires the data to be stored in non-volatile memory. TRUE = Dem shall store the prestored data in non-volatile memory, FALSE = Data can be lost at shutdown (not stored in Nvm)
recoverableIn SameOperation Cycle Boolean 0..1 attr If the attribute is set to true then reporting PASSED will reset the indication of a failed test in the current operation cycle. If the attribute is set to false then reporting PASSED will be ignored and not lead to a reset of the indication of a failed test.

| Enumeration | DiagnosticClearEventAllowedBehaviorEnum |

| Package | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticEvent | | Note | This enumeration defines the possible behavior for clear event allowed | | Aggregated by | DiagnosticEvent.clearEventAllowedBehavior | | Literal | Description | | noStatusByte Change | The event status byte keeps unchanged. Tags: atp.EnumerationLiteralIndex=0 | | onlyThisCycleAnd Readiness | The OperationCycle and readiness bits of the event status byte are reset. Tags: atp.EnumerationLiteralIndex=1 |

表4.152:RoleBasedPortAssignment(RoleBasedPortAssignment)

| 包 | M2::AUTOSARTemplates::SWComponentTemplate::SwcInternalBehavior::ServiceMapping | | 说明 | This class specifies an assignment of a role to a particular service port (RPortPrototype or PPort Prototype) of an AtomicSwComponentType. With this assignment, the role of the service port can be mapped to a specific ServiceNeeds element, so that a tool is able to create the correct connector. | | 基类 | ARObject | | 聚合于 | NvBlockDescriptor.clientServerPort, SwcServiceDependency.assignedPort |

属性 类型 多重性 种类 备注
portPrototype PortPrototype 0..1 ref Service PortPrototype used in the assigned role. This PortPrototype shall either belong to the same AtomicSw ComponentType as the SwcInternalBehavior which owns the ServiceDependency or to the same NvBlockSw ComponentType as the NvBlockDescriptor.
role Identifier 0..1 attr This is the role of the assigned Port in the given context. The value shall be a shortName of the Blueprint of a Port Interface as standardized in the Software Specification of the related AUTOSAR Service.

DiagnosticEvent 可以连接到一个或多个指示器:

表4.153:DiagnosticConnectedIndicator(DiagnosticConnectedIndicator)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticEvent | | 说明 | Description of indicators that are defined per DiagnosticEvent. | | 基类 | ARObject , Identifiable , MultilanguageReferrable , Referrable | | 聚合于 | DiagnosticEvent.connectedIndicator |

属性 类型 多重性 种类 备注
behavior DiagnosticConnected IndicatorBehaviorEnum 0..1 attr Behavior of the linked indicator.
healingCycle DiagnosticOperation Cycle 0..1 ref The deactivation of indicators per event is defined as healing of a diagnostic event. The operation cycle in which the warning indicator will be switched off is defined here.

表4.154:DiagnosticConnectedIndicator(DiagnosticConnectedIndicator)

属性 类型 多重性 种类 备注
healingCycle Counter Threshold PositiveInteger 0..1 attr This attribute defines the number of healing cycles for the WarningIndicatorOffCriteria Stereotypes: atpVariation Tags: vh.latestBindingTime=preCompileTime
indicator DiagnosticIndicator 0..1 ref Reference to the used indicator.
indicatorFailure CycleCounter Threshold PositiveInteger 0..1 attr This attribute defines the number of failure cycles for the WarningIndicatorOnCriteria. Please note that this attribute is not relevant for the Adaptive Platform.

reference DiagnosticConnectedIndicator . indicator 的存在性:

DiagnosticConnectedIndicator . healingCycle 属性的存在性:

该规则应在 DEXT 完成时施加。

| Enumeration | DiagnosticEventClearAllowedEnum |

| Package | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticEvent | | Note | Denotes whether clearing of events is allowed. | | Aggregated by | DiagnosticEvent.eventClearAllowed | | Literal | Description | | always | The clearing is allowed unconditionally. Tags: atp.EnumerationLiteralIndex=0 | | requiresCallback Execution | In case the clearing of a Diagnostic Event has to be allowed or prohibited through the SWC interface CallbackClearEventAllowed, the SWC has to indicate this by defining appropriate ServiceNeeds (i.e. DiagnosticEventNeeds). Tags: atp.EnumerationLiteralIndex=2 |

| Enumeration | DiagnosticEventKindEnum |

| Package | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticEvent | | Note | Applicability of the diagnostic event. | | Aggregated by | DiagnosticEvent.eventKind | | Literal | Description | | bsw | The event is assigned to a BSW module. Tags: atp.EnumerationLiteralIndex=0 | | swc | The event is assigned to a SWC. Tags: atp.EnumerationLiteralIndex=1 |

| Enumeration | DiagnosticConnectedIndicatorBehaviorEnum |

| Package | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticEvent | | Note | Behavior of the indicator. | | Aggregated by | DiagnosticConnectedIndicator.behavior | | Literal | Description | | blinkMode | The indicator blinks when the event has status FAILED. Tags: atp.EnumerationLiteralIndex=0 | | blinkOrContinuous OnMode | The indicator is active and blinks when the event has status FAILED. Tags: atp.EnumerationLiteralIndex=1 | | continuousOnMode | The indicator is active when the event has status FAILED. Tags: atp.EnumerationLiteralIndex=2 | | fastFlashingMode | Flash Indicator Lamp should be set to "Fast Flash". Tags: atp.EnumerationLiteralIndex=3 | | slowFlashingMode | Flash Indicator Lamp should be set to "Slow Flash". Tags: atp.EnumerationLiteralIndex=4 |

4.4.2.2. 文本描述

附加到 DiagnosticEvent 的文本表述内容:

该内容的目的是例如定义与特定 DiagnosticEvent 相关的成熟条件。

关于 DiagnosticEvent 的文本描述:

表4.155:StructuredReq(StructuredReq)

| 包 | M2::MSR::Documentation::BlockElements::RequirementsTracing | | 说明 | This represents a structured requirement. This is intended for a case where specific requirements for features are collected. Note that this can be rendered as a labeled list. | | 基类 | ARObject , DocumentViewSelectable , Identifiable , MultilanguageReferrable , Paginateable , Referrable , Traceable | | 聚合于 | DocumentationBlock.structuredReq |

属性 类型 多重性 种类 备注
appliesTo StandardNameEnum * attr This attribute represents the platform the requirement is assigned to. Tags: xml.namePlural=APPLIES-TO-DEPENDENCIES xml.sequenceOffset=25
Class StructuredReq
conflicts DocumentationBlock 0..1 aggr This represents an informal specification of conflicts. Tags: xml.sequenceOffset=40
date DateTime 1 attr This represents the date when the requirement was initiated. Tags: xml.sequenceOffset=5
dependencies DocumentationBlock 0..1 aggr This represents an informal specification of dependencies. Note that upstream tracing should be formalized in the property trace provided by the superclass Traceable. Tags: xml.sequenceOffset=30
description DocumentationBlock 0..1 aggr This represents the general description of the requirement. Tags: xml.sequenceOffset=10
importance String 1 attr This allows to represent the importance of the requirement. Tags: xml.sequenceOffset=8
issuedBy String 1 attr This represents the person, organization or authority which issued the requirement. Tags: xml.sequenceOffset=6
rationale DocumentationBlock 0..1 aggr This represents the rationale of the requirement. Tags: xml.sequenceOffset=20
remark DocumentationBlock 0..1 aggr This represents an informal remark. Note that this is not modeled as annotation, since these remark is still essential part of the requirement. Tags: xml.sequenceOffset=60
supporting Material DocumentationBlock 0..1 aggr This represents an informal specification of the supporting material. Tags: xml.sequenceOffset=50
testedItem Traceable * ref This association represents the ability to trace on the same specification level. This supports for example the of acceptance tests. Tags: xml.sequenceOffset=70
type String 1 attr This attribute allows to denote the type of requirement to denote for example is it an "enhancement", "new feature" etc. Tags: xml.sequenceOffset=7
useCase DocumentationBlock 0..1 aggr This describes the relevant use cases. Note that formal references to use cases should be done in the trace relation. Tags: xml.sequenceOffset=35

| Enumeration | StandardNameEnum |

| Package | M2::AUTOSARTemplates::GenericStructure::DocumentationOnM1 | | Note | This enumeration lists all allowed standard abbreviations. | | Aggregated by | AppliedStandard.appliesTo, StructuredReq.appliesTo | | Literal | Description |

| Enumeration | StandardNameEnum |

| AP | This values represents the Adaptive Platform. Tags: atp.EnumerationLiteralIndex=0 | | CP | This Value represents the Classic Platform. Tags: atp.EnumerationLiteralIndex=1 | | FO | This values represents the Foundation. Tags: atp.EnumerationLiteralIndex=2 | | TA | This Values represents the Testing of the Adaptive Platform. Tags: atp.EnumerationLiteralIndex=3 | | TC | This values represents the Testing of the Classic Platform. Tags: atp.EnumerationLiteralIndex=4 |

关于半形式化文本建模的更多细节请参见图 4.4。

DiagnosticEvent.introduction.structuredReq 的标准化值:

  • DIAG_EVENT_MON_COND:该值描述相应 DiagnosticEvent 的监视条件。

  • DIAG_EVENT_MON_TYPE:该值描述相应 DiagnosticEvent 的监视类型。

  • DIAG_EVENT_MON_RATE:该值描述相应 DiagnosticEvent 的监视速率。

  • DIAG_EVENT_MAT_COND:该值描述 DiagnosticEvent 的成熟条件。

  • DIAG_EVENT_DEMAT_COND:该值描述 DiagnosticEvent 的去成熟条件。

  • DIAG_EVENT_AGING:该值描述 DiagnosticEvent 关于老化的行为。

  • DIAG_EVENT_LIMP_IN_ACT:该值描述 DiagnosticEvent 的关联跛行回家动作。

  • DIAG_EVENT_MAT_TIME:该值描述相应 DiagnosticEvent 的成熟时间,即故障必须存在多久或多频繁。

  • DIAG_EVENT_DEMAT_TIME:该值描述相应 DiagnosticEvent 的去成熟时间,即 OK 条件必须满足多久或多频繁。

成熟条件的示例定义见第 B.3 节。

4.4.2.3. 关联事件的标识

DiagnosticEvent . associatedEventIdentification 的语义:

为此,测试仪必须能够通过属性 DiagnosticEvent.associatedEventIdentification 的值来标识 DiagnosticEvent 的发生。

DiagnosticEvent . associatedEventIdentification 属性的存在性:

  • 引用 DiagnosticTroubleCodeUds.dtcProps.snapshotRecordContent 存在,且被引用的 DiagnosticDataIdentifierSet 至少引用一个 dataIdentifier.dataElement.dataElement,该元素也被一个属性 dataProvider 设置为值 DEM_EVENT_ASSOCIATED_IDENTIFICATION 的 DiagnosticDemProvidedDataMapping 引用。

  • 引用 DiagnosticTroubleCodeUds.dtcProps.extendedDataRecord 存在,且被引用的 DiagnosticExtendedDataRecord 至少聚合一个 recordElement.dataElement,该元素也被一个属性 dataProvider 设置为值 DEM_EVENT_ASSOCIATED_IDENTIFICATION 的 DiagnosticDemProvidedDataMapping 引用。

该规则应在 DEXT 完成时施加。

[TPS_DEXT_01151] 和 [constr_1768] 所描述的用例描绘于图 4.57。

请注意,[constr_1768] 只描述了使用属性 DiagnosticEvent.associatedEventIdentification 的最小可行场景。

也可能存在不止一个被 DiagnosticDemProvidedDataMapping 引用的 DiagnosticDataElement,其中属性 dataProvider 设置为值 DEM_EVENT_ASSOCIATED_IDENTIFICATION。

4.4.3. DiagnosticTroubleCode

DiagnosticTroubleCode(即 ECU 对诊断事件的外部视图)与它们的属性一起定义,并使用 DiagnosticEventToTroubleCodeUdsMapping 映射到 DiagnosticEvent。

三种 DTC:

  • 非 OBD 相关 DTC(DiagnosticTroubleCodeUds)

  • OBD 相关 DTC(DiagnosticTroubleCodeObd)

  • J1939 [21] 相关 DTC(DiagnosticTroubleCodeJ1939)

这种 DTC 特化各自独有的属性分别建模为 DiagnosticTroubleCodeUds、DiagnosticTroubleCodeObd 和 DiagnosticTroubleCodeJ1939 的属性。

表4.156:DiagnosticTroubleCodeUds(DiagnosticTroubleCodeUds)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticTroubleCode | | 说明 | This element is used to describe non OBD-relevant DTCs. Tags: atp.recommendedPackage=DiagnosticTroubleCodes | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticTroubleCode , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
considerPto Status Boolean 0..1 attr This attribute describes the affection of the event by the Dem PTO handling. true: the event is affected by the Dem PTO handling. false: the event is not affected by the Dem PTO handling. Stereotypes: atpVariation Tags: vh.latestBindingTime=preCompileTime
dtcProps DiagnosticTroubleCode Props 0..1 ref Defined properties associated with the DemDTC.
eventReadiness Group EventObdReadiness Group 0..1 aggr This attribute specifies the Event OBD Readiness group for PID $01 and PID $41 computation. This attribute is only applicable for emission-related ECUs. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=eventReadinessGroup.eventObdReadiness Group, eventReadinessGroup.variationPoint.shortLabel vh.latestBindingTime=postBuild

表4.157:DiagnosticTroubleCodeUds(DiagnosticTroubleCodeUds)

属性 类型 多重性 种类 备注
functionalUnit PositiveInteger 0..1 attr This attribute specifies a 1-byte value which identifies the corresponding basic vehicle / system function which reports the DTC. This parameter is necessary for the report of severity information. Stereotypes: atpVariation Tags: vh.latestBindingTime=preCompileTime
obdDtc Value3Byte PositiveInteger 0..1 attr 3 Byte OBD DTC value based on the definition from SAE J2012. The existence of this attribute is only required if separated UDS and OBD DTC values are used for SAE J1979-2. If this attribute does not exist, then UDS DTC values are used with J1979-2. Stereotypes: atpVariation Tags: vh.latestBindingTime=preCompileTime
severity DiagnosticUdsSeverity Enum 0..1 attr DTC severity according to ISO 14229-1. Stereotypes: atpVariation Tags: vh.latestBindingTime=preCompileTime
udsDtcValue PositiveInteger 0..1 attr Unique Diagnostic Trouble Code value for UDS. Stereotypes: atpVariation Tags: vh.latestBindingTime=preCompileTime
wwhObdDtc Class DiagnosticWwhObdDtc ClassEnum 0..1 attr This attribute is used to identify (if applicable) the corresponding severity class of an WWH-OBD DTC. Stereotypes: atpVariation Tags: vh.latestBindingTime=preCompileTime

DiagnosticTroubleCodeUds . udsDtcValue 属性的存在性:

表4.158:DiagnosticTroubleCodeObd(DiagnosticTroubleCodeObd)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticTroubleCode | | 说明 | This element is used to define OBD-relevant DTCs. Tags: atp.recommendedPackage=DiagnosticTroubleCodes | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticTroubleCode , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
considerPto Status Boolean 0..1 attr This attribute describes the affection of the event by the Dem PTO handling. true: the event is affected by the Dem PTO handling. false: the event is not affected by the Dem PTO handling. Stereotypes: atpVariation Tags: vh.latestBindingTime=preCompileTime
dtcProps DiagnosticTroubleCode Props 0..1 ref Defined properties associated with the DemDTC.

表4.159:DiagnosticTroubleCodeObd(DiagnosticTroubleCodeObd)

属性 类型 多重性 种类 备注
eventReadiness Group EventObdReadiness Group 0..1 aggr This aggregation allows for the variant definition of the attribute eventObdReadinessGroup. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=eventReadinessGroup.eventObdReadiness Group, eventReadinessGroup.variationPoint.shortLabel vh.latestBindingTime=postBuild
obdDTCValue PositiveInteger 0..1 attr Unique Diagnostic Trouble Code value for OBD. Stereotypes: atpVariation Tags: vh.latestBindingTime=preCompileTime

不带事件组合的事件与 DTC 之间的关系:

已配置,则所有在角色 dtcProps 中引用 DiagnosticTroubleCodeProps(该属性又在角色 diagnosticMemory 中引用 DiagnosticMemoryDestination)的 DiagnosticTroubleCodeUds 应最多只被一个 DiagnosticEventToTroubleCodeUdsMapping 引用。

该规则应在 DEXT 完成时施加。

DTC 的公共属性:

表4.160:EventObdReadinessGroup(EventObdReadinessGroup)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticTroubleCode | | 说明 | This meta-class represents the ability to define the value of attribute eventObdReadinessGroup. It is only introduced to allow for a variant modeling of this attribute. | | 基类 | ARObject | | 聚合于 | DiagnosticTroubleCodeObd.eventReadinessGroup, DiagnosticTroubleCodeUds.eventReadinessGroup |

属性 类型 多重性 种类 备注
eventObd Readiness Group NameToken 0..1 attr This attribute specifies the Event OBD Readiness group for PID $01 and PID $41 computation. This attribute is only applicable for emission-related ECUs. Stereotypes: atpIdentityContributor

DiagnosticTroubleCodeObd . obdDTCValue 属性的存在性:

udsDtcValue 的值应唯一:

该规则应在 DEXT 完成时施加。

表4.161:DiagnosticTroubleCode(DiagnosticTroubleCode)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticTroubleCode | | 说明 | A diagnostic trouble code defines a unique identifier that is shown to the diagnostic tester. | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 子类 | DiagnosticTroubleCodeJ1939, DiagnosticTroubleCodeObd, DiagnosticTroubleCodeUds | | 聚合于 | ARPackage.element |

DiagnosticTroubleCodeGroup 的语义:

组合在一起。每个 DiagnosticTroubleCodeGroup 都指派有自己的 groupNumber 值。

表4.162:DiagnosticTroubleCodeGroup(DiagnosticTroubleCodeGroup)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticTroubleCode | | 说明 | The diagnostic trouble code group defines the DTCs belonging together and thereby forming a group. Tags: atp.recommendedPackage=DiagnosticTroubleCodes | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
dtc DiagnosticTroubleCode * ref This represents the collection of DiagnosticTroubleCodes defined by this DiagnosticTroubleCodeGroup. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=dtc.diagnosticTroubleCode, dtc.variation Point.shortLabel vh.latestBindingTime=postBuild
groupNumber PositiveInteger 0..1 attr This represents the base number of the DTC group. Stereotypes: atpVariation Tags: vh.latestBindingTime=preCompileTime

DiagnosticTroubleCodeGroup . groupNumber 的存在性:

DiagnosticTroubleCodeGroup.groupNumber 的值应唯一:

该规则应在 DEXT 完成时施加。

DiagnosticTroubleCodeGroup.groupNumber 的值:

该规则应在 DEXT 完成时施加。

ISO 14229-1 保留 DiagnosticTroubleCodeGroup.groupNumber 的值:

maxNumberFreezeFrameRecords vs. freezeFrame 的存在性:

该规则应在 DEXT 完成时施加。

[constr_1352] 的适用性:

该规则应在 DEXT 完成时施加。

DiagnosticTroubleCodeProps . snapshotRecordContent 属性的存在性:

该规则应在 DEXT 完成时施加。

附加到 DiagnosticTroubleCode 的文本表述内容:

该内容的目的是例如定义与特定 DiagnosticTroubleCode 相关的错误文本或可能原因。

为 DiagnosticTroubleCode 附加半形式化文本内容的不同方法:

  • 具有 DiagnosticTroubleCode 描述性质的文本描述应通过元类 TraceableText 提供,即通过 introduction.trace。

  • 就 ODX 长名称表征 DiagnosticTroubleCode 的文本描述应通过属性 longName 提供。

表4.163:TraceableText(TraceableText)

| 包 | M2::MSR::Documentation::BlockElements::RequirementsTracing | | 说明 | This meta-class represents the ability to denote a traceable text item such as requirements etc. The following approach applies: • shortName represents the tag for tracing • longName represents the head line • category represents the kind of the tagged text (see [constr_2540]) | | 基类 | ARObject , DocumentViewSelectable , Identifiable , MultilanguageReferrable , Paginateable , Referrable Traceable | | 聚合于 | DocumentationBlock.trace |

属性 类型 多重性 种类 备注
Class TraceableText
text DocumentationBlock 1 aggr This represents the text to which the tag applies. Tags: xml.roleElement=false xml.roleWrapperElement=false xml.sequenceOffset=30 xml.typeElement=false xml.typeWrapperElement=false

表4.164:TraceableText(TraceableText)

| 包 | M2::AUTOSARTemplates::GenericStructure::GeneralTemplateClasses::Identifiable | | 说明 | Instances of this class can be referred to by their identifier (while adhering to namespace borders). They also may have a longName. But they are not considered to contribute substantially to the overall structure of an AUTOSAR description. In particular it does not contain other Referrables. | | 基类 | ARObject , Referrable | | 子类 | Caption, DefItem, DocumentationContext, Identifiable , SdgCaption, TraceReferrable , Traceable |

属性 类型 多重性 种类 备注
longName MultilanguageLong Name 0..1 aggr This specifies the long name of the object. Long name is targeted to human readers and acts like a headline.

表4.165:MultilanguageReferrable(MultilanguageReferrable)

| 包 | M2::MSR::Documentation::TextModel::MultilanguageData | | 说明 | This meta-class represents the ability to specify a long name which acts in the role of a headline. It is intended for human readers. Per language it should be around max 80 characters. | | 基类 | ARObject | | 聚合于 | AliasNameAssignment.label, GeneralAnnotation .label, MultilanguageReferrable .longName, Note.label, Prms.label, ValueGroup.label |

属性 类型 多重性 种类 备注
l4 LLongName 1..* aggr This is the long name in one particular language. Tags: xml.roleElement=true xml.roleWrapperElement=false xml.sequenceOffset=20 xml.typeElement=false xml.typeWrapperElement=false

表4.166:MultilanguageLongName(MultilanguageLongName)

| 包 | M2::MSR::Documentation::TextModel::LanguageDataModel | | 说明 | MixedContentForLongNames in one particular language. The language is denoted in the | | 基类 | ARObject , LanguageSpecific , MixedContentForLongName | | 聚合于 | MultilanguageLongName.l4 |

表4.167:LLongName(LLongName)

属性 类型 多重性 种类 备注
blueprintValue String 0..1 attr This represents a description that documents how the value shall be defined when deriving objects from the blueprint. Tags: atp.Status=draft xml.attribute=true

关于半形式化文本建模的更多细节请参见图 4.4。

仅使用 TraceableText 和 StructuredReq 并不能算作半形式化的文本附加。有必要将 category 的值标准化,以获得一定程度的半形式化文本描述。

DiagnosticTroubleCode.introduction.trace 的标准化值:

  • DIAG_DTC_ERROR_TEXT:该值应用于描述错误文本。

  • DIAG_DTC_REP_ACT:该值描述相应 DiagnosticTroubleCode 的关联维修措施。

  • DIAG_DTC_CUS_PER_SYMP:该值描述相应 DiagnosticTroubleCode 可能的用户感知症状。

  • DIAG_DTC_POSS_CAUSE:该值描述相应 DiagnosticTroubleCode 的可能原因。

通过 TraceableText 定义半形式化文本描述的示例见第 B.4 节。

DiagnosticMemoryDestinationUserDefined.memoryId 的值:

该规则应在 DEXT 完成时施加。

换言之,属性 DiagnosticMemoryDestinationUserDefined.memoryId 的值在任何给定的 DiagnosticExtract 内应是唯一的。

表4.168:DiagnosticMemoryDestination(DiagnosticMemoryDestination)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticMemoryDestination | | 说明 | This abstract meta-class represents a possible memory destination for a diagnostic event. | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 子类 | DiagnosticMemoryDestinationPrimary, DiagnosticMemoryDestinationUserDefined | | 聚合于 | ARPackage.element |

表4.169:DiagnosticMemoryDestination(DiagnosticMemoryDestination)

属性 类型 多重性 种类 备注
agingRequires TestedCycle Boolean 0..1 attr Defines whether the aging cycle counter is processed every aging cycles or else only tested aging cycle are considered. If the attribute is set to TRUE: only tested aging cycle are considered for aging cycle counter. If the attribute is set to FALSE: aging cycle counter is processed every aging cycle. On the classic platform, the value of this attribute has to be identical for each DiagnosticMemoryDestination.
clearDtc Limitation DiagnosticClearDtc LimitationEnum 0..1 attr Defines the scope of the DEM_ClearDTC Api. On the classic platform, the value of this attribute has to be identical for each DiagnosticMemoryDestination.
dtcStatus AvailabilityMask PositiveInteger 0..1 attr Mask for the supported DTC status bits by the Dem.
event Displacement Strategy DiagnosticEvent DisplacementStrategy Enum 0..1 attr This attribute defines, whether support for event displacement is enabled or not, and which displacement strategy is followed.
maxNumberOf EventEntries PositiveInteger 0..1 attr This attribute fixes the maximum number of event entries in the fault memory.
memoryEntry StorageTrigger DiagnosticMemoryEntry StorageTriggerEnum 0..1 attr Describes the trigger to allocate an event memory entry.
statusBit HandlingTest FailedSinceLast Clear DiagnosticStatusBit HandlingTestFailed SinceLastClearEnum 0..1 attr This attribute defines, whether the aging and displacement mechanism shall be applied to the "Test FailedSinceLastClear" status bits. On the classic platform, the value of this attribute has to be identical for each DiagnosticMemoryDestination.
statusBit StorageTest Failed Boolean 0..1 attr This parameter is used to activate/deactivate the permanent storage of the "TestFailed" status bits. true: storage activated false: storage deactivated
typeOfFreeze FrameRecord Numeration DiagnosticTypeOf FreezeFrameRecord NumerationEnum 0..1 attr This attribute defines the type of assigning freeze frame record numbers for event-specific freeze frame records.

DiagnosticMemoryDestination . dtcStatusAvailabilityMask 属性的存在性:

DiagnosticMemoryDestination . eventDisplacementStrategy 属性的存在性:

DiagnosticMemoryDestination . maxNumberOfEventEntries 属性的存在性:

| Enumeration | DiagnosticMemoryEntryStorageTriggerEnum |

| Package | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticMemoryDestination | | Note | Trigger types to allocate an event memory entry. | | Aggregated by | DiagnosticMemoryDestination .memoryEntryStorageTrigger | | Literal | Description | | confirmed | Status information of UDS DTC status bit 3 Tags: atp.EnumerationLiteralIndex=0 | | fdcThreshold | Threshold to allocate an event memory entry and to capture the Freeze Frame. Tags: atp.EnumerationLiteralIndex=1 | | testFailed | Status information of UDS DTC status bit 0. Tags: atp.EnumerationLiteralIndex=3 |

| Enumeration | DiagnosticClearDtcLimitationEnum |

| Package | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticMemoryDestination | | Note | Scope of the DEM_ClearDTC Api. | | Aggregated by | DiagnosticMemoryDestination .clearDtcLimitation | | Literal | Description | | allSupportedDtcs | DEM_ClearDtc API accepts all supported DTC values. Tags: atp.EnumerationLiteralIndex=0 | | clearAllDtcs | DEM_ClearDtc API accepts ClearAllDTCs only. Tags: atp.EnumerationLiteralIndex=1 |

| Enumeration | DiagnosticEventDisplacementStrategyEnum |

| Package | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticMemoryDestination | | Note | Defines the displacement strategy. | | Aggregated by | DiagnosticMemoryDestination .eventDisplacementStrategy | | Literal | Description | | full | Event memory entry displacement is enabled, by consideration of priority active/passive status, and occurrence. Tags: atp.EnumerationLiteralIndex=0 | | none | Event memory entry displacement is disabled. Tags: atp.EnumerationLiteralIndex=1 | | prioOcc | Event memory entry displacement is enabled, by consideration of priority and occurrence (but without active/passive status). Tags: atp.EnumerationLiteralIndex=2 |

| Enumeration | DiagnosticStatusBitHandlingTestFailedSinceLastClearEnum |

| Package | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticTroubleCode | | Note | This enumeration controls whether the aging and displacement mechanism shall be applied to the 'TestFailedSinceLastClear' status bits. | | Aggregated by | DiagnosticMemoryDestination .statusBitHandlingTestFailedSinceLastClear | | Enumeration | DiagnosticStatusBitHandlingTestFailedSinceLastClearEnum | | Literal | Description | | statusBitAgingAnd Displacement | The "TestFailedSinceLastClear" status bits are reset to 0, if aging or displacement applies. Tags: atp.EnumerationLiteralIndex=0 | | statusBitNormal | Aging and displacement has no impact on the "TestFailedSinceLastClear" status bits. Tags: atp.EnumerationLiteralIndex=1 |

| Enumeration | DiagnosticTypeOfFreezeFrameRecordNumerationEnum |

| Package | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticMemoryDestination | | Note | FreezeFrame record numeration type | | Aggregated by | DiagnosticMemoryDestination .typeOfFreezeFrameRecordNumeration | | Literal | Description | | calculated | Freeze frame records will be numbered consecutive starting by 1 in their chronological order. Tags: atp.EnumerationLiteralIndex=0 | | configured | Freeze frame records will be numbered based on the given configuration in their chronological order. Tags: atp.EnumerationLiteralIndex=1 |

表4.170:DiagnosticTypeOfFreezeFrameRecordNumerationEnum(DiagnosticTypeOfFreezeFrameRecordNumerationEnum)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticMemoryDestination | | 说明 | This represents a primary memory for a diagnostic event. Tags: atp.recommendedPackage=DiagnosticMemoryDestinations | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMemory Destination , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
typeOfDtc Supported DiagnosticTypeOfDtc SupportedEnum 0..1 attr This attribute defines the format returned by Dem_Dcm GetTranslationType and does not relate to/influence the supported Dem functionality.

表4.171:DiagnosticMemoryDestinationPrimary(DiagnosticMemoryDestinationPrimary)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticMemoryDestination | | 说明 | This represents a user-defined memory for a diagnostic event. Tags: atp.recommendedPackage=DiagnosticMemoryDestinations | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMemory Destination , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

表4.172:DiagnosticMemoryDestinationUserDefined(DiagnosticMemoryDestinationUserDefined)

属性 类型 多重性 种类 备注
authRole DiagnosticAuthRole * ref This reference identifies the collection of applicable DiagnosticAuthRole Stereotypes: atpSplitable Tags: atp.Splitkey=authRole
memoryId PositiveInteger 0..1 attr This represents the identifier of the user-defined memory.

DiagnosticMemoryDestinationPrimary 的存在性:

DiagnosticTroubleCodeUdsToTroubleCodeObdMapping 的语义:

表4.173:DiagnosticTroubleCodeProps(DiagnosticTroubleCodeProps)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticTroubleCode | | 说明 | This element defines common Dtc properties that can be reused by different non OBD-relevant DTCs. Tags: atp.recommendedPackage=DiagnosticTroubleCodePropss | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
aging DiagnosticAging 0..1 ref Reference to an aging algorithm in case that an aging/ unlearning of the event is allowed. Stereotypes: atpSplitable Tags: atp.Splitkey=aging
diagnostic Memory DiagnosticMemory Destination 0..1 ref Reference to the applicable DiagnosticMemory Destination. Stereotypes: atpSplitable Tags: atp.Splitkey=diagnosticMemory

表4.174:DiagnosticTroubleCodeProps(DiagnosticTroubleCodeProps)

属性 类型 多重性 种类 备注
extendedData Record DiagnosticExtended DataRecord * ref Defines the links to an extended data class sampler. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=extendedDataRecord.diagnosticExtended DataRecord, extendedDataRecord.variationPoint.short Label vh.latestBindingTime=preCompileTime
freezeFrame DiagnosticFreezeFrame * ref Define the links to a freeze frame class sampler. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=freezeFrame.diagnosticFreezeFrame, freeze Frame.variationPoint.shortLabel vh.latestBindingTime=preCompileTime
immediateNv DataStorage Boolean 0..1 attr Change description for Class immediateNvDataStorage in table "Table A.111: DiagnosticTroubleCodeProps": Switch to enable immediate storage triggering of an according event memory entry persistently to NVRAM. true: immediate non-volatile storage triggering on first occurrence and shutdown. false: immediate non-volatile storage triggering on shutdown.
legislated FreezeFrame ContentUdsObd DiagnosticDataIdentifier Set 0..1 ref This reference identifies the layout of legislated freeze frames used for emission related diagnostics over the UDS protocol such as OBDonUDS or WWH-OBD. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=legislatedFreezeFrameContentUds Obd.diagnosticDataIdentifierSet, legislatedFreezeFrame ContentUdsObd.variationPoint.shortLabel vh.latestBindingTime=preCompileTime
maxNumber FreezeFrame Records PositiveInteger 0..1 attr This attribute defines the number of according freeze frame records, which can maximal be stored for this event. Therefore all these freeze frame records have the same freeze frame class.
priority PositiveInteger 0..1 attr Priority of the event, in view of full event buffer. A lower value means higher priority. Stereotypes: atpVariation Tags: vh.latestBindingTime=preCompileTime
significance DiagnosticSignificance Enum 0..1 attr Significance of the event, which indicates additional information concerning fault classification and resolution.
snapshot RecordContent DiagnosticDataIdentifier Set 0..1 ref This represents the freeze frame layout as a set of DIDs. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=snapshotRecordContent.diagnosticData IdentifierSet, snapshotRecordContent.variationPoint.short Label vh.latestBindingTime=preCompileTime

DiagnosticTroubleCodeProps . priority 的存在性:

| Enumeration | DiagnosticSignificanceEnum |

| Package | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticTroubleCode | | Note | Significance level of a diagnostic event. | | Aggregated by | DiagnosticTroubleCodeProps.significance | | Literal | Description | | fault | Failure, which affects the component/ECU itself. Tags: atp.EnumerationLiteralIndex=0 | | occurence | Issue, which indicates additional information concerning insufficient system behavior. Tags: atp.EnumerationLiteralIndex=1 |

| Enumeration | DiagnosticUdsSeverityEnum |

| Package | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticTroubleCode | | Note | Severity types for a DTC according to ISO 14229-1. | | Aggregated by | DiagnosticTroubleCodeUds.severity | | Literal | Description | | checkAtNextHalt | Check at next halt. Tags: atp.EnumerationLiteralIndex=0 | | immediately | Check immediately. Tags: atp.EnumerationLiteralIndex=1 | | maintenanceOnly | Maintenance required. Tags: atp.EnumerationLiteralIndex=2 | | noSeverity | No severity information available. Tags: atp.EnumerationLiteralIndex=3 |

表4.175:DiagnosticUdsSeverityEnum(DiagnosticUdsSeverityEnum)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticTroubleCode | | 说明 | This represents the ability to define a list of DiagnosticDataIdentifiers that can be reused in different contexts. Tags: atp.recommendedPackage=DiagnosticDataIdentifierSets | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
dataIdentifier (ordered) DiagnosticDataIdentifier * ref Reference to an ordered list of Data Identifiers.

| Enumeration | DiagnosticWwhObdDtcClassEnum |

| Package | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticTroubleCode | | Note | This meta-class represents the ability to model severity classes of an WWH-OBD DTC. | | Aggregated by | DiagnosticTroubleCodeUds.wwhObdDtcClass | | Literal | Description |

| Enumeration | DiagnosticWwhObdDtcClassEnum |

| demDtcWwhObd ClassA | This attribute represents the severity class A. Tags: atp.EnumerationLiteralIndex=0 | | demDtcWwhObd ClassB1 | This attribute represents the severity class B1. Tags: atp.EnumerationLiteralIndex=1 | | demDtcWwhObd ClassB2 | This attribute represents the severity class B2. Tags: atp.EnumerationLiteralIndex=2 | | demDtcWwhObd ClassC | This attribute represents the severity class C. Tags: atp.EnumerationLiteralIndex=3 | | demDtcWwhObd ClassNoInformation | This attribute represents the option to intentionally not describe a dedicated severity class of an WWH-OBD DTC. Tags: atp.EnumerationLiteralIndex=4 |

表4.176:DiagnosticTroubleCodeUdsToTroubleCodeObdMapping(DiagnosticTroubleCodeUdsToTroubleCodeObdMapping)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticMapping | | 说明 | This meta-class represents the ability to associate a UDS trouble code to an OBD trouble code. Tags: atp.recommendedPackage=DiagnosticMappings | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMapping , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
troubleCode Obd DiagnosticTroubleCode Obd 0..1 ref This represents the OBD DTC referenced in the mapping between UDS and OBD DTCs.
troubleCodeUds DiagnosticTroubleCode Uds 0..1 ref This represents the UDS DTC referenced in the mapping between UDS and OBD DTCs.

4.4.4. DiagnosticExtendedDataRecord

DiagnosticExtendedDataRecord 的语义:

extendedDataRecord.recordNumber 的值:

该规则应在 DEXT 完成时施加。

extendedDataRecord.recordNumber 的值在主故障存储器内应唯一:

该规则应在 DEXT 完成时施加。

extendedDataRecord.recordNumber 的值在用户自定义故障存储器内应唯一:

该规则应在 DEXT 完成时施加。

由 DiagnosticExtendedDataRecord 拥有的 DiagnosticDataElement:

此外,各个元素之间(由单个 DiagnosticDataElement 的开始——由 DiagnosticParameter.bitOffset 指示——与所聚合 DiagnosticDataElement 的长度定义)不应存在间隙。

DiagnosticExtendedDataRecord 中包含的(通过角色 recordElement 中 DiagnosticParameter 的聚合)各个 DiagnosticDataElement 应满足以下条件之一:

  • DiagnosticDataElement 完全不定义属性 maxNumberOfElements。

  • 属性 DiagnosticDataElement.maxNumberOfElements 的建模应遵循 [TPS_DEXT_01001] 中的描述。

该规则应在 DEXT 完成时施加。

[constr_10371] 的依据是:在 DiagnosticExtendedDataRecord 上下文中 DiagnosticParameter 的使用通常限于少数原始值,不需要嵌套的结构化 DiagnosticParameter。

扩展数据记录的自定义触发器的定义:

一个触发器。因此,AUTOSAR 只能提供一种手段来口头描述自定义触发器应如何运作。

为此定义了属性 DiagnosticExtendedDataRecord.customTrigger。

DiagnosticExtendedDataRecord . customTrigger 属性的存在性:

该规则应在 DEXT 完成时施加。

表4.177:DiagnosticExtendedDataRecord(DiagnosticExtendedDataRecord)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticExtendedDataRecord | | 说明 | Description of an extended data record. Tags: atp.recommendedPackage=DiagnosticExtendedDataRecords | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
customTrigger String 0..1 attr This attribute shall be taken to verbally describe the nature of the custom trigger.
recordElement DiagnosticParameter * aggr Defined DataElements in the extended record element. Stereotypes: atpSplitable Tags: atp.Splitkey=recordElement.bitOffset, record Element.ident.shortName
recordNumber PositiveInteger 0..1 attr This attribute specifies an unique identifier for an extended data record.
trigger DiagnosticRecord TriggerEnum 0..1 attr This attribute specifies the primary trigger to allocate an event memory entry.
update Boolean 0..1 attr This attribute defines when an extended data record is captured. true: This extended data record is captured every time. false: This extended data record is only captured for new event memory entries.

attributes DiagnosticExtendedDataRecord . trigger and update 的存在性:

该规则应在 DEXT 完成时施加。

DiagnosticExtendedDataRecord . recordElement 的存在性:

DiagnosticExtendedDataRecord . recordNumber 的存在性:

DiagnosticRecordTriggerEnum.testFailedThisOperationCycle 的使用:

该规则应在 DEXT 完成时施加。

DiagnosticRecordTriggerEnum.testPassed 的使用:

[constr_10364] 的含义是:在 DiagnosticFreezeFrame 中显式不允许使用 DiagnosticRecordTriggerEnum.testPassed。

| Enumeration | DiagnosticRecordTriggerEnum |

| Package | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticFreezeFrame | | Note | Triggers to allocate an event memory entry. | | Aggregated by | DiagnosticExtendedDataRecord.trigger, DiagnosticFreezeFrame.trigger | | Literal | Description | | confirmed | capture on "Confirmed" Tags: atp.EnumerationLiteralIndex=0 | | custom | implement custom capture Tags: atp.EnumerationLiteralIndex=4 | | fdcThreshold | capture on "FDC Threshold" Tags: atp.EnumerationLiteralIndex=1 | | pending | capture on "Pending" Tags: atp.EnumerationLiteralIndex=2 | | testFailed | capture on "Test Failed" Tags: atp.EnumerationLiteralIndex=3 | | testFailedThis OperationCycle | Test Failed This Operation Cycle. Tags: atp.EnumerationLiteralIndex=5 | | testPassed | Capture on testFailed bit transition 1 -> 0. Tags: atp.EnumerationLiteralIndex=6 |

4.4.5. DiagnosticFreezeFrame

DiagnosticFreezeFrame 的语义:

更多细节请参见图 4.58。

freezeFrame.recordNumber 的值:

该规则应在 DEXT 完成时施加。

freezeFrame.recordNumber 在主故障存储器内应唯一:

该规则应在 DEXT 完成时施加。

freezeFrame.recordNumber 在用户自定义故障存储器内应唯一:

该规则应在 DEXT 完成时施加。

表4.178:DiagnosticFreezeFrame(DiagnosticFreezeFrame)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticFreezeFrame | | 说明 | This element describes combinations of DIDs for a non OBD relevant freeze frame. Tags: atp.recommendedPackage=DiagnosticFreezeFrames | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
customTrigger String 0..1 attr This attribute shall be taken to verbally describe the nature of the custom trigger.
recordNumber PositiveInteger 0..1 attr This attribute defines a record number for a freeze frame record. Stereotypes: atpVariation Tags: vh.latestBindingTime=preCompileTime
trigger DiagnosticRecord TriggerEnum 0..1 attr This attribute defines the primary trigger to allocate an event memory entry.
update Boolean 0..1 attr This attribute defines the approach when the freeze frame record is stored/updated. true: FreezeFrame record is captured every time. false: FreezeFrame record is only captured for new event memory entries.

冻结帧的自定义触发器的定义:

为此定义了属性 DiagnosticFreezeFrame.customTrigger。

DiagnosticFreezeFrame . customTrigger 属性的存在性:

该规则应在 DEXT 完成时施加。

DiagnosticFreezeFrame . trigger 的存在性:

4.4.6. DiagnosticCondition

DiagnosticCondition 组合为 DiagnosticConditionGroup:

不同类型的条件:

  • 只要 DiagnosticEnableCondition 未满足,事件报告就无效,因此不会被接受。

  • 只要 DiagnosticStorageCondition 未满足,事件就不会存储在事件存储器中。

表4.179:DiagnosticCondition(DiagnosticCondition)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticCondition | | 说明 | Abstract element for StorageConditions and EnableConditions. | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 子类 | DiagnosticEnableCondition, DiagnosticStorageCondition | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
initValue Boolean 0..1 attr Defines the initial status for enable or disable of acceptance/storage of event reports of a diagnostic event. The value is the initialization after power up (before this condition is reported the first time). true: acceptance/storage of a diagnostic event enabled false: acceptance/storage of a diagnostic event disabled

DiagnosticCondition . initValue 的存在性:

表4.180:DiagnosticEnableCondition(DiagnosticEnableCondition)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticCondition | | 说明 | Specification of an enable condition. Tags: atp.recommendedPackage=DiagnosticConditions | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticCondition , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

表4.181:DiagnosticStorageCondition(DiagnosticStorageCondition)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticCondition | | 说明 | Specification of a storage condition. Tags: atp.recommendedPackage=DiagnosticConditions | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticCondition , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

4.4.7. 诊断防抖

诊断事件防抖的实际算法:

换言之,诊断事件的防抖可以用三种不同的方式表述:

  • DiagEventDebounceCounterBased 表示实现基于计数器的防抖的能力。

  • DiagEventDebounceTimeBased 表示实现基于时间的防抖的能力。

  • DiagEventDebounceMonitorInternal 表示在诊断监视器自身的实现内部实现防抖的能力。

属性 DiagnosticDebounceAlgorithmProps.debounceCounterStorage 的存在条件:

该规则应在 DEXT 完成时施加。

表4.182:DiagnosticDebounceAlgorithmProps(DiagnosticDebounceAlgorithmProps)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticDebouncingAlgorithm | | 说明 | Defines properties for the debounce algorithm class. | | 基类 | ARObject , Identifiable , MultilanguageReferrable , Referrable | | 聚合于 | DiagnosticCommonProps.debounceAlgorithmProps |

表4.183:DiagnosticDebounceAlgorithmProps(DiagnosticDebounceAlgorithmProps)

属性 类型 多重性 种类 备注
debounce Algorithm DiagEventDebounce Algorithm 0..1 aggr This represents the actual debounce algorithm.
debounce Behavior DiagnosticDebounce BehaviorEnum 0..1 attr This attribute defines how the event debounce algorithm will behave, if a related enable condition is not fulfilled or ControlDTCSetting of the related event is disabled. Stereotypes: atpVariation Tags: vh.latestBindingTime=preCompileTime
debounce CounterStorage Boolean 0..1 attr Switch to store the debounce counter value non-volatile or not. true: debounce counter value shall be stored non-volatile false: debounce counter value is volatile Please note that this attribute is not relevant for the adaptive platform.

DiagnosticDebounceAlgorithmProps . debounceAlgorithm 属性的存在性:

表4.184:DiagEventDebounceAlgorithm(DiagEventDebounceAlgorithm)

| 包 | M2::AUTOSARTemplates::CommonStructure::ServiceNeeds | | 说明 | This class represents the ability to specify the pre-debounce algorithm which is selected and/or required by the particular monitor. This class inherits from Identifiable in order to allow further documentation of the expected or implemented debouncing and to use the category for the identification of the expected / implemented debouncing. | | 基类 | ARObject , Identifiable , MultilanguageReferrable , Referrable | | 子类 | DiagEventDebounceCounterBased, DiagEventDebounceMonitorInternal, DiagEventDebounceTime Based | | 聚合于 | DiagnosticDebounceAlgorithmProps.debounceAlgorithm, DiagnosticEventNeeds.diagEventDebounce Algorithm |

表4.185:DiagEventDebounceAlgorithm(DiagEventDebounceAlgorithm)

| 包 | M2::AUTOSARTemplates::CommonStructure::ServiceNeeds | | 说明 | This meta-class represents the ability to indicate that the counter-based debounce algorithm shall be used by the DEM for this diagnostic monitor. This is related to set the ECUC choice container DemDebounceAlgorithmClass to DemDebounce CounterBased. | | 基类 | ARObject , DiagEventDebounceAlgorithm , Identifiable , MultilanguageReferrable , Referrable | | 聚合于 | DiagnosticDebounceAlgorithmProps.debounceAlgorithm, DiagnosticEventNeeds.diagEventDebounce Algorithm |

表4.186:DiagEventDebounceCounterBased(DiagEventDebounceCounterBased)

属性 类型 多重性 种类 备注
counterBased FdcThreshold StorageValue Integer 0..1 attr Threshold to allocate an event memory entry and to capture the Freeze Frame.
counter DecrementStep Size Integer 0..1 attr This value shall be taken to decrement the internal debounce counter. Stereotypes: atpVariation Tags: vh.latestBindingTime=preCompileTime
counterFailed Threshold Integer 0..1 attr This value defines the event-specific limit that indicates the "failed" counter status. Stereotypes: atpVariation Tags: vh.latestBindingTime=preCompileTime
counter IncrementStep Size Integer 0..1 attr This value shall be taken to increment the internal debounce counter. Stereotypes: atpVariation Tags: vh.latestBindingTime=preCompileTime
counterJump Down Boolean 0..1 attr This value activates or deactivates the counter jump-down behavior. Stereotypes: atpVariation Tags: vh.latestBindingTime=preCompileTime
counterJump DownValue Integer 0..1 attr This value represents the initial value of the internal debounce counter if the counting direction changes from incrementing to decrementing. Stereotypes: atpVariation Tags: vh.latestBindingTime=preCompileTime
counterJumpUp Boolean 0..1 attr This value activates or deactivates the counter jump-up behavior. Stereotypes: atpVariation Tags: vh.latestBindingTime=preCompileTime
counterJumpUp Value Integer 0..1 attr This value represents the initial value of the internal debounce counter if the counting direction changes from decrementing to incrementing. Stereotypes: atpVariation Tags: vh.latestBindingTime=preCompileTime
counterPassed Threshold Integer 0..1 attr This value defines the event-specific limit that indicates the "passed" counter status. Stereotypes: atpVariation Tags: vh.latestBindingTime=preCompileTime

DiagEventDebounceCounterBased . counterDecrementStepSize 的存在性:

DiagEventDebounceCounterBased . counterIncrementStepSize 的存在性:

DiagEventDebounceCounterBased . counterFailedThreshold 的存在性:

counterFailedThreshold 应在 DEXT 完成时存在。

DiagEventDebounceCounterBased . counterPassedThreshold 的存在性:

DiagEventDebounceCounterBased . counterJumpDownValue 的存在性:

DiagEventDebounceCounterBased . counterJumpUpValue 的存在性:

表4.187:DiagEventDebounceTimeBased(DiagEventDebounceTimeBased)

| 包 | M2::AUTOSARTemplates::CommonStructure::ServiceNeeds | | 说明 | This meta-class represents the ability to indicate that the time-based pre-debounce algorithm shall be used by the Dem for this diagnostic monitor. This is related to set the EcuC choice container DemDebounceAlgorithmClass to DemDebounceTime Base. | | 基类 | ARObject , DiagEventDebounceAlgorithm , Identifiable , MultilanguageReferrable , Referrable | | 聚合于 | DiagnosticDebounceAlgorithmProps.debounceAlgorithm, DiagnosticEventNeeds.diagEventDebounce Algorithm |

属性 类型 多重性 种类 备注
timeBasedFdc Threshold StorageValue TimeValue 0..1 attr Threshold to allocate an event memory entry and to capture the Freeze Frame. Stereotypes: atpVariation Tags: vh.latestBindingTime=preCompileTime
timeFailed Threshold TimeValue 0..1 attr This value represents the event-specific delay indicating the "failed" status. Stereotypes: atpVariation Tags: vh.latestBindingTime=preCompileTime
timePassed Threshold TimeValue 0..1 attr This value represents the event-specific delay indicating the "passed" status. Stereotypes: atpVariation Tags: vh.latestBindingTime=preCompileTime

DiagEventDebounceTimeBased . timeFailedThreshold 属性的存在性:

DiagEventDebounceTimeBased . timePassedThreshold 属性的存在性:

表4.188:DiagEventDebounceMonitorInternal(DiagEventDebounceMonitorInternal)

| 包 | M2::AUTOSARTemplates::CommonStructure::ServiceNeeds | | 说明 | This meta-class represents the ability to indicate that no Dem pre-debounce algorithm shall be used for this diagnostic monitor. The SWC might implement an internal debouncing algorithm and report qualified (debounced) results to the Dem/DM. | | 基类 | ARObject , DiagEventDebounceAlgorithm , Identifiable , MultilanguageReferrable , Referrable | | 聚合于 | DiagnosticDebounceAlgorithmProps.debounceAlgorithm, DiagnosticEventNeeds.diagEventDebounce Algorithm |

| Enumeration | DiagnosticDebounceBehaviorEnum |

| Package | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticDebouncingAlgorithm | | Note | Event debounce algorithm behavior options. | | Aggregated by | DiagnosticDebounceAlgorithmProps.debounceBehavior | | Literal | Description | | freeze | The event debounce counter will be frozen with the current value and will not change while a related enable condition is not fulfilled or ControlDTCSetting of the related event is disabled. After all related enable conditions are fulfilled and ControlDTCSetting of the related event is enabled again, the event qualification will continue with the next report of the event (i.e. SetEventStatus). Tags: atp.EnumerationLiteralIndex=0 | | reset | The event debounce counter will be reset to initial value if a related enable condition is not fulfilled or ControlDTCSetting of the related event is disabled. The qualification of the event will be restarted with the next valid event report. Tags: atp.EnumerationLiteralIndex=1 |

4.4.8. DiagnosticConditionGroup

DiagnosticConditionGroup 的语义:

表4.189:DiagnosticConditionGroup(DiagnosticConditionGroup)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticConditionGroup | | 说明 | Abstract element for StorageConditionGroups and EnableConditionGroups. | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 子类 | DiagnosticEnableConditionGroup, DiagnosticStorageConditionGroup | | 聚合于 | ARPackage.element |

表4.190:DiagnosticEnableConditionGroup(DiagnosticEnableConditionGroup)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticConditionGroup | | 说明 | Enable condition group which includes one or several enable conditions. Tags: atp.recommendedPackage=DiagnosticConditions | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticConditionGroup , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
enableCondition DiagnosticEnable Condition * ref Reference to enableConditions that are part of the Enable ConditionGroup. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=enableCondition.diagnosticEnableCondition, enableCondition.variationPoint.shortLabel vh.latestBindingTime=postBuild

DiagnosticEnableConditionGroup . enableCondition 的存在性:

表4.191:DiagnosticStorageConditionGroup(DiagnosticStorageConditionGroup)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticConditionGroup | | 说明 | Storage condition group which includes one or several storage conditions. Tags: atp.recommendedPackage=DiagnosticConditions | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticConditionGroup , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
storage Condition DiagnosticStorage Condition * ref Reference to storageConditions that are part of the StorageConditionGroup. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=storageCondition.diagnosticStorage Condition, storageCondition.variationPoint.shortLabel vh.latestBindingTime=postBuild

DiagnosticStorageConditionGroup . storageCondition 的存在性:

4.4.9. DiagnosticOperationCycle

DiagnosticOperationCycle 的语义:

«枚举»

DiagnosticOperationCycleTypeEnum ignition

obdDrivingCycle warmup

other

表4.192:DiagnosticOperationCycle(DiagnosticOperationCycle)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticOperationCycle | | 说明 | Definition of an operation cycle that is the base of the event qualifying and for Dem scheduling. Tags: atp.recommendedPackage=DiagnosticOperationCycles | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
type DiagnosticOperation CycleTypeEnum 0..1 attr Operation cycles types for the Dem.

| Enumeration | DiagnosticOperationCycleTypeEnum |

| Package | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticOperationCycle | | Note | Operation cycles types used to identify certain Operation cycles with a certain semantics. | | Aggregated by | DiagnosticOperationCycle.type | | Literal | Description | | ignition | Ignition ON / OFF cycle Tags: atp.EnumerationLiteralIndex=0 | | obdDrivingCycle | OBD Driving cycle Tags: atp.EnumerationLiteralIndex=1 | | other | further operation cycle Tags: atp.EnumerationLiteralIndex=2 | | warmup | OBD Warm up cycle Tags: atp.EnumerationLiteralIndex=5 |

4.4.10. DiagnosticAging

老化:

这一语义通过元类 DiagnosticAging 形式化。

表4.193:DiagnosticAging(DiagnosticAging)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticAging | | 说明 | Defines the aging algorithm. Tags: atp.recommendedPackage=DiagnosticAgings | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
agingCycle DiagnosticOperation Cycle 0..1 ref This represents the applicable aging cycle. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=agingCycle.diagnosticOperationCycle, aging Cycle.variationPoint.shortLabel vh.latestBindingTime=preCompileTime
threshold PositiveInteger 0..1 attr Number of aging cycles needed to unlearn/delete the event. Stereotypes: atpVariation Tags: vh.latestBindingTime=preCompileTime

DiagnosticAging . agingCycle 属性的存在性:

DiagnosticAging . threshold 属性的存在性:

4.4.11. DiagnosticIndicator

不同种类的 DiagnosticIndicator:

表4.194:DiagnosticIndicator(DiagnosticIndicator)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticIndicator | | 说明 | Definition of an indicator. Tags: atp.recommendedPackage=DiagnosticIndicators | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
type DiagnosticIndicatorType Enum 0..1 attr Defines the type of the indicator. Stereotypes: atpVariation Tags: vh.latestBindingTime=preCompileTime

| Enumeration | DiagnosticIndicatorTypeEnum |

| Package | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticIndicator | | Note | Type of an indicator. | | Aggregated by | DiagnosticIndicator.type, IndicatorStatusNeeds.type | | Literal | Description | | amberWarning | Amber Warning Lamp Tags: atp.EnumerationLiteralIndex=0 | | malfunction | Malfunction Indicator Lamp Tags: atp.EnumerationLiteralIndex=1 | | protectLamp | Protect Lamp Tags: atp.EnumerationLiteralIndex=2 | | redStopLamp | Red Stop Lamp Tags: atp.EnumerationLiteralIndex=3 | | warning | Warning Tags: atp.EnumerationLiteralIndex=4 |

4.4.12. DiagnosticTestResult

元类 DiagnosticTestResult 允许对诊断测试结果进行正式定义。

该元类的目的是支持将最新测试结果报告给客户端。这对 OBD 服务模式 0x06 特别重要,见第 4.3.9.5 章。

表4.195:DiagnosticTestResult(DiagnosticTestResult)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticTestResult | | 说明 | This meta-class represents the ability to define diagnostic test results. Tags: atp.recommendedPackage=DiagnosticTestResults | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
diagnosticEvent DiagnosticEvent 0..1 ref This attribute represents the diagnostic event that is related to the diagnostic test result. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=diagnosticEvent.diagnosticEvent, diagnostic Event.variationPoint.shortLabel vh.latestBindingTime=preCompileTime
monitored Identifier Diagnostic MeasurementIdentifier 0..1 ref This attribute represents the related diagnostic monitored identifier.
testIdentifier DiagnosticTestIdentifier 0..1 aggr This attribute represents the applicable test identifier.
updateKind DiagnosticTestResult UpdateEnum 0..1 attr This attribute controls the update behavior of the enclosing DiagnosticTestResult. Stereotypes: atpVariation Tags: vh.latestBindingTime=preCompileTime

aggregation DiagnosticTestResult . testIdentifier 的存在性:

reference DiagnosticTestResult . monitoredIdentifier 的存在性:

| Enumeration | DiagnosticTestResultUpdateEnum |

| Package | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticTestResult | | Note | This meta-class represents the ability to define the update behavior of a DiagnosticTestResult. | | Aggregated by | DiagnosticTestResult.updateKind | | Literal | Description | | always | Any DTR result reported by the monitor is used by the Dem. Tags: atp.EnumerationLiteralIndex=0 | | steady | The Dem accepts reported DTRs only when the configured debouncing mechanism is stable at the FAIL or PASS limit. Tags: atp.EnumerationLiteralIndex=1 |

表4.196:DiagnosticTestIdentifier(DiagnosticTestIdentifier)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticTestResult | | 说明 | This meta-class represents the ability to create a diagnostic test identifier. | | 基类 | ARObject | | 聚合于 | DiagnosticTestResult.testIdentifier |

属性 类型 多重性 种类 备注
id PositiveInteger 0..1 attr This represents the numerical id associated with the diagnostic test identifier. Stereotypes: atpVariation Tags: vh.latestBindingTime=preCompileTime
uasId PositiveInteger 0..1 attr This represents the unit and scaling Id of the diagnostic test result. Stereotypes: atpVariation Tags: vh.latestBindingTime=preCompileTime

DiagnosticTestIdentifier . id 属性的存在性:

DiagnosticTestIdentifier . uasId 属性的存在性:

表4.197:DiagnosticMeasurementIdentifier(DiagnosticMeasurementIdentifier)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticTestResult | | 说明 | This meta-class represents the ability to describe a measurement identifier. Tags: atp.recommendedPackage=DiagnosticMeasurementIdentifiers |

表4.198:DiagnosticMeasurementIdentifier(DiagnosticMeasurementIdentifier)

| 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
obdMid PositiveInteger 0..1 attr This represents the numerical measurement Id Stereotypes: atpVariation Tags: vh.latestBindingTime=preCompileTime

DiagnosticMeasurementIdentifier . obdMid 属性的存在性:

请注意,在 TPS 软件组件模板 [9] 的上下文中存在非常类似的建模,形式为 ObdMonitorServiceNeeds.updateKind。

软件组件的实现者了解软件组件使用防抖的方式以及它如何调用 Dem。

软件组件的实现者拥有为属性 ObdMonitorServiceNeeds.updateKind 设置合适值所需的全部信息。

另一方面,DEXT 模型的作者可能注意到一个诊断软件组件有问题,并可能使用 DEXT 模型作为变通手段,通过 DiagnosticTestResult.updateKind 修正 ObdMonitorServiceNeeds.updateKind 的错误设置。

4.4.13. Dem 配置的 OBD 相关方面

对 OBD 相关 [19] 建模的支持需要添加一些相当全局的(即整个 ECU 层级)属性,它们本可以添加到 EcuInstance。

然而,这与诊断栈分散式配置的想法不一致——在那种想法下,信息是在实际的 EcuInstance 尚不可用的时点添加的。

因此,适用于 ECU 层级的属性被添加到元类 DiagnosticEcuInstanceProps。

指示 EcuInstance 是否支持 OBD:

表4.199:DiagnosticEcuInstanceProps(DiagnosticEcuInstanceProps)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticContribution | | 说明 | This meta-class represents the ability to model properties that are specific for a given EcuInstance but on the other hand represent purely diagnostic-related information. In the spirit of decentralized configuration it is therefore possible to specify the diagnostic-related information related to a given EcuInstance even if the EcuInstance does not yet exist. Tags: atp.recommendedPackage=DiagnosticEcuInstancePropss | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
ecuInstance EcuInstance * ref This represents the actual EcuInstance to which the information contained in the DiagnosticEcuInstance contribute. Stereotypes: atpSplitable Tags: atp.Splitkey=ecuInstance
obdSupport DiagnosticObdSupport Enum 0..1 attr This attribute is used to specify the role (if applicable) in which the DiagnosticEcuInstance supports OBD.

DiagnosticEcuInstanceProps . obdSupport 属性的存在性:

| Enumeration | DiagnosticObdSupportEnum |

| Package | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticContribution | | Note | This meta-class represents the ability to model the roles in which a participation in OBD is foreseen. At the moment, this applies exclusively to the Dem. However, future extension of the Dcm may require this setting as well. | | Aggregated by | DiagnosticEcuInstanceProps.obdSupport | | Literal | Description | | masterEcu | This represent the role "master ECU". Tags: atp.EnumerationLiteralIndex=0 | | noObdSupport | This represents the ability to explicitly specify that no participation in OBD is foreseen. Tags: atp.EnumerationLiteralIndex=1 | | primaryEcu | This represents the role "primary ECU". Tags: atp.EnumerationLiteralIndex=2 | | secondaryEcu | This represents the role "secondary ECU". Tags: atp.EnumerationLiteralIndex=3 |

Dem 的另一个 OBD 相关特性是支持使用中监视器性能比(IUMPR)的计算。可以定义一个所谓的 DiagnosticIumprGroup,它封装一组 DiagnosticEvent 的计算。

DiagnosticIumprDenominatorGroup 的建模支持配置应应用于 IUMPR 分母递增的附加环境条件。

从建模的角度来看,DiagnosticIumprGroup 和 DiagnosticIumprDenominatorGroup 都不直接引用关联的 DiagnosticEvent。

但由于角色 iumpr 中引用的 DiagnosticIumpr 又最多引用一个 DiagnosticEvent,所得关系实际上归结为 DiagnosticIumprGroup 和 DiagnosticIumprDenominatorGroup 能够精确定义受影响 DiagnosticEvent 的集合。

DiagnosticIumprGroup.category 的标准化值:

属性 DiagnosticIumprGroup.category 的标准化值为:

DiagnosticIumprDenominatorGroup.category 的标准化值:

属性 DiagnosticIumprDenominatorGroup.category 的标准化值为:

DiagnosticIumpr 语义的进一步定义:

表4.200:DiagnosticIumpr(DiagnosticIumpr)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticEvent | | 说明 | This meta-class represents the ability to model the in-use monitor performance ratio. The latter computes to the number of times a fault could have been found divided by the number of times the vehicle conditions have been properly fulfilled. Tags: atp.recommendedPackage=DiagnosticIumprs | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
event DiagnosticEvent 0..1 ref This reference represents the DiagnosticEvent that corresponds to the IUMPR computation.
ratioKind DiagnosticIumprKind Enum 0..1 attr This attribute controls the behavior of how the ratio is calculated.

| Enumeration | DiagnosticIumprKindEnum |

| Package | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticEvent | | Note | This enumeration is used to control the ratio calculation behavior. | | Aggregated by | DiagnosticIumpr.ratioKind | | Literal | Description | | apiBased | The calculation is based on the usage of an API. Tags: atp.EnumerationLiteralIndex=0 | | observerBased | The calculation is based on the usage of an observer. Tags: atp.EnumerationLiteralIndex=1 |

表4.201:DiagnosticIumprGroup(DiagnosticIumprGroup)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticEvent | | 说明 | This meta-class represents the ability to model a IUMPR groups. Tags: atp.recommendedPackage=DiagnosticIumprGroups | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
iumpr DiagnosticIumpr * ref This reference collects DiagnosticIumpr to a Diagnostic IumprGroup. Stereotypes: atpSplitable Tags: atp.Splitkey=iumpr
iumprGroup Identifier DiagnosticIumprGroup Identifier 0..1 aggr This aggregation allows for the variant modeling of the groupIdentifier. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=iumprGroupIdentifier.groupId, iumprGroup Identifier.variationPoint.shortLabel vh.latestBindingTime=postBuild

DiagnosticIumprGroup . iumprGroupIdentifier 属性的存在性:

表4.202:DiagnosticIumprGroupIdentifier(DiagnosticIumprGroupIdentifier)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticEvent | | 说明 | This meta-class provides the ability to the define the group identifier for an IumprGroup. | | 基类 | ARObject | | 聚合于 | DiagnosticIumprGroup.iumprGroupIdentifier |

属性 类型 多重性 种类 备注
groupId NameToken 0..1 attr This attribute shall be taken to define an identifier for the IUMPR group. Please note that the value of this identifier is driven by regulations outside the scope of AUTOSAR and can therefore not be limited to the set of characters suitable for a shortName. Stereotypes: atpIdentityContributor

DiagnosticIumprGroupIdentifier . groupId 属性的存在性:

表4.203:DiagnosticIumprDenominatorGroup(DiagnosticIumprDenominatorGroup)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticEvent | | 说明 | This meta-class represents the ability to model a IUMPR denominator groups. Tags: atp.recommendedPackage=DiagnosticIumprDenominatorGroup | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
iumpr DiagnosticIumpr * ref This reference collects DiagnosticIumpr to a Diagnostic IumprDenominatorGroup. Stereotypes: atpSplitable Tags: atp.Splitkey=iumpr
4.4.13.1. OBD-II 的 Dem 配置

OBD-II 用例的 DTC 建模与 UDS 用例的 DTC 建模非常相似。换言之,DiagnosticTroubleCodeObd 以与从 DiagnosticTroubleCodeUds 引用该元类相同的方式引用 DiagnosticTroubleCodeProps。

请注意,元类 DiagnosticTroubleCodeObd 只适用于 OBD-II 的实现。

OBD-II 情形的法规冻结帧:

attributes of DiagnosticTroubleCodeProps 的存在性:

  • freezeFrame

  • snapshotRecordContent

  • diagnosticMemory

  • extendedDataRecord

  • aging

4.4.13.2. WWH-OBD 的 Dem 配置

用于实现 WWH-OBD 的诊断故障码的定义:

WWH-OBD 的法规冻结帧的定义:

可选地,支持角色 DiagnosticTroubleCodeProps.extendedDataRecord 中存在属性 recordNumber 设置为值 90 的引用。

4.5. 功能禁用

4.5.1. 简介

在概念上,FiM [14] 与 Dem 密切相关,因为它处理功能(通过所谓的功能标识符 Function Identifier,简称 Fid,表达)与关联 DiagnosticEvent 之间的关系。

关于功能禁用的配置概览描绘于图 4.74。与功能禁用相关的映射类(例如 DiagnosticFimAliasEventMapping)的描述见第 5.4 节。

4.5.2. 别名事件

FiM 与 Dem 的紧密关系可能在分布式配置中产生后果:可能无法在配置 Dem 之前配置 FiM,因为建模 FiM 配置需要来自 Dem 配置的模型元素(尤其是 DiagnosticEvent)。

这引出了 DiagnosticFimAliasEvent 的定义,即使 Dem 配置尚不存在、或最终项目要考虑具有不同 Dem 事件名称的配置,也可以用它来建模 FiM 配置。

但是请注意,DiagnosticFimAliasEvent 的定义对 FiM 的配置不是强制的。可以直接考虑 DiagnosticEvent 的存在,从而绕过 DiagnosticFimAliasEvent 的定义。

表4.204:DiagnosticFimAliasEvent(DiagnosticFimAliasEvent)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Fim | | 说明 | This meta-class is used to represent a given event semantics. However, the name of the actual events used in a specific project is sometimes not defined yet, not known or not in the responsibility of the author. Therefore, the DiagnosticFimAliasEvent has a reference to the actual DiagnosticEvent and by this the final connection is created. Tags: atp.recommendedPackage=DiagnosticFimAliasEvents | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticAbstractAliasEvent , DiagnosticCommonElement Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

表4.205:DiagnosticAbstractAliasEvent(DiagnosticAbstractAliasEvent)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticEvent | | 说明 | This meta-class represents an abstract base class for all diagnostic alias events. | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 子类 | DiagnosticFimAliasEvent, DiagnosticFimAliasEventGroup | | 聚合于 | ARPackage.element |

4.5.3. 功能标识符

作为 Dem 元模型扩展的 FiM 支持需要对附加元类建模,以描述 DiagnosticEvent 与 Fid(在元模型术语中即 DiagnosticFunctionIdentifier)之间可能的多种映射方式。

DiagnosticFunctionIdentifier 的语义:

事件(Event):这对应于 DiagnosticEvent。

FiM 事件组(Fim Event Group):这表示在 FiM 范围内定义的一组事件(在 FiM 术语中也称为汇总事件)。在元模型中,FiM 事件组通过元类 DiagnosticFimEventGroup 表示。

为强调其局部性,相应的元类被命名为 DiagnosticFimEventGroup。DiagnosticFimEventGroup 能够在角色 event 中引用 0..* 个 DiagnosticEvent。

这样,就表达了 DiagnosticEvent 在由 DiagnosticFimEventGroup 形成的假设事件组中的成员关系。

请注意,DiagnosticEvent 在第 4.4.2 章中讨论。最终所有来源都将引用 DiagnosticEvent。

表4.206:DiagnosticFunctionIdentifier(DiagnosticFunctionIdentifier)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Fim | | 说明 | This meta-class represents a diagnostic function identifier (a.k.a. FID). Tags: atp.recommendedPackage=DiagnosticFunctionIdentifiers | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

表4.207:DiagnosticFunctionIdentifier(DiagnosticFunctionIdentifier)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Fim | | 说明 | This meta-class represents the ability to define the inhibition of a specific function identifier within the Fim configuration. Tags: atp.recommendedPackage=DiagnosticFunctionIdentifierInhibits | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable |

表4.208:DiagnosticFunctionIdentifierInhibit(DiagnosticFunctionIdentifierInhibit)

| 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
function Identifier DiagnosticFunction Identifier 0..1 ref This represents the corresponding function identifier.
inhibitionMask DiagnosticInhibition MaskEnum 0..1 attr This represents the value of the inhibition mask behavior.
inhibitSource DiagnosticFunction InhibitSource * aggr This represents a collection of DiagnosticFunctionInhibit Source that contribute to the configuration of the enclosing DiagnosticFunctionIdentiferInhibit.

DiagnosticFunctionIdentifierInhibit . inhibitionMask 属性的存在性:

表4.209:DiagnosticFunctionInhibitSource(DiagnosticFunctionInhibitSource)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Fim | | 说明 | This meta-class represents the ability to define an inhibition source in the context of the Fim configuration. | | 基类 | ARObject , Identifiable , MultilanguageReferrable , Referrable | | 聚合于 | DiagnosticFunctionIdentifierInhibit.inhibitSource |

属性 类型 多重性 种类 备注
event DiagnosticFimAlias Event 0..1 ref This represents the alias event applicable for the referencing inhibition source.
eventGroup DiagnosticFimAlias EventGroup 0..1 ref This represents the event group applicable for the referencing inhibition source.

| Enumeration | DiagnosticInhibitionMaskEnum |

| Package | M2::AUTOSARTemplates::DiagnosticExtract::Fim | | Note | This meta-class represents the ability to define different kinds of inhibition mask behavior. | | Aggregated by | DiagnosticFunctionIdentifierInhibit.inhibitionMask | | Literal | Description | | lastFailed | This represents the inhibition mask behavior "last failed". Tags: atp.EnumerationLiteralIndex=0 | | notTested | This represents the inhibition mask behavior "not tested". Tags: atp.EnumerationLiteralIndex=1 | | tested | This represents the inhibition mask behavior "tested". Tags: atp.EnumerationLiteralIndex=3 | | testedAndFailed | This represents the inhibition mask behavior "tested and failed". Tags: atp.EnumerationLiteralIndex=2 |

DiagnosticFunctionInhibitSource 的语义:

DiagnosticFunctionInhibitSource 继承自 Identifiable,以便能够利用 desc、adminData 和 introduction 等属性来以文本方式解释定义某个禁用源的原因。

用于 DiagnosticFunctionInhibitSource 建模的 StructuredReq.category 标准化值:

来自 DiagnosticFunctionInhibitSource 的引用:

  • 角色 event 中的 DiagnosticFimAliasEventMapping

  • 角色 eventGroup 中的 DiagnosticFimAliasEventGroupMapping

该规则应在 DEXT 完成时施加。

元类 DiagnosticFimAliasEventMapping 和 DiagnosticFimAliasEventGroupMapping 的语义在第 5.4.2 节中描述。

表4.210:DiagnosticFimEventGroup(DiagnosticFimEventGroup)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Fim | | 说明 | This meta-class represents the ability to model a Fim event group, also known as a summary event in Fim terminology. This represents a group of single diagnostic events. Tags: atp.recommendedPackage=DiagnosticFimEventGroups | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
event DiagnosticEvent * ref This reference represents the way of grouping diagnostic events into a summary event in the context of the Fim.

DiagnosticFunctionInhibitSource . event 的语义:

DiagnosticFunctionInhibitSource . eventGroup 的语义:

由在 FiM 范围内定义实际分组的 DiagnosticEvent 组成。

4.6. J1939 上的诊断

4.6.1. 简介

J1939 上的诊断在某种程度上与 “世界其他部分” 相似。换言之,J1939 与其他通信网络一样使用 Dcm 和 Dem。

另一方面,J1939 与 “世界其他部分” 之间存在显著差异,因此有必要创建一个完全聚焦于 J1939 的诊断提取应是什么样子的单独章节。

话虽如此,对 J1939 的 Dcm 相关模型元素的支持主要发生在 AUTOSAR 系统模板 [6] 的领域,而不是本文档的范围内。

J1939Dcm 所支持服务的实际配置通过在系统描述中指派 DMx 消息来完成。

J1939DcmIPdu 到 J1939 Dcm 诊断服务的映射发生在向 EcuC 派生的过程中。

在以下各节中,本文档聚焦于解释与 Dem 相关的建模。

J1939 诊断配置的概览描绘于图 4.75。与 J1939 相关的映射类(例如 DiagnosticJ1939SpnMapping)的描述见第 5.5 节。

4.6.2. 可疑参数编号

在 J1939 术语中,可疑参数编号(SPN)表示一个信号标识符。该信号标识符的数值存储在属性 DiagnosticJ1939Spn.spn 中。

在概念上,可疑参数编号绑定到 SystemSignal,即通过将可疑参数编号附加到一个 SystemSignal 上创建一个 J1939 信号。

乍一看,把 spn 属性附加到 SystemSignal 本身似乎是个好主意。然而,这会把非常特定的 J1939 相关模型语义放在一个非常显眼的位置。

这看起来就是不对的。幸好存在元类 DiagnosticJ1939SpnMapping(见第 5.5.1 节),可以在不实际改动 SystemSignal 的情况下将 J1939 信号标识符 “注入” 到 SystemSignal 中。

表4.211:DiagnosticJ1939Spn(DiagnosticJ1939Spn)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::J1939 | | 说明 | This meta-class represents the ability to model a J1939 Suspect Parameter Number (SPN). Tags: atp.recommendedPackage=DiagnosticJ1939Spns | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
spn PositiveInteger 0..1 attr This attribute represents the concrete numerical identification for the enclosing SPN.

DiagnosticJ1939Spn . spn 属性的存在性:

4.6.3. J1939Dcm 相关建模

诊断提取内 J1939Dcm 相关配置的建模延伸到元类 J1939Cluster 的一个新属性的定义。后者提供一个名为 networkId 的属性。更多信息请参见 [6]。

The actual configuration of the services supported by J1939Dcm is done by assigning DMx messages in the System Description.

4.6.4. Dem 相关建模

针对 J1939 的 Dem 相关支持的建模围绕 DiagnosticJ1939Node 展开。该元类实际上充当所有与 Dem 相关的模型元素的某种 “倒置” 枢纽。DiagnosticJ1939Node 表示一个特定的功能,或者用 J1939 术语来说,一个控制器应用(Controller Application)。

这一方面在图 4.75 中得到强调。

由于按照 J1939 概念,每个控制器应用在网络管理方面代表一个独立的实体,因此适用以下约束:

DiagnosticJ1939Node 与 J1939NmNode 的关系:

该规则应在 DEXT 完成时施加。

J1939 支持类似于 DiagnosticFreezeFrame 定义的信息捕获,如第 4.4.5 章所解释。但在 J1939 的情况下,可以定义两种不同类型的冻结帧:

DiagnosticJ1939FreezeFrame 与 DiagnosticJ1939ExpandedFreezeFrame 的区别:

DiagnosticJ1939Spn 与 DiagnosticJ1939FreezeFrame 和 DiagnosticJ1939ExpandedFreezeFrame 的关系:

换言之,可疑参数编号既可以是一个普通冻结帧的一部分,同时也可以是一个扩展冻结帧的一部分。

表4.212:DiagnosticJ1939FreezeFrame(DiagnosticJ1939FreezeFrame)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::J1939 | | 说明 | This meta-class represents the ability to model a J1939 Freeze Frame. Tags: atp.recommendedPackage=DiagnosticJ1939FreezeFrames | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
node DiagnosticJ1939Node 0..1 ref This represents the DiagnosticJ1939Node to which the J1939 freeze frame is associated.
spn (ordered) DiagnosticJ1939Spn * ref This represents the collection of SPNs that make the J1939 Freeze Frame.

8 意为:若干元类都引用 DiagnosticJ1939Node。

表4.213:DiagnosticJ1939ExpandedFreezeFrame(DiagnosticJ1939ExpandedFreezeFrame)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::J1939 | | 说明 | This meta-class represents the ability to model an expanded J1939 Freeze Frame. Tags: atp.recommendedPackage=DiagnosticJ1939ExpandedFreezeFrames | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
node DiagnosticJ1939Node 0..1 ref This represents the DiagnosticJ1939Node to which the J1939 expanded freeze frame is associated.
spn (ordered) DiagnosticJ1939Spn * ref This represents the collection of SPNs that make the expanded J1939 Freeze Frame.

| Enumeration | DiagnosticTroubleCodeJ1939DtcKindEnum |

| Package | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticTroubleCode | | Note | This meta-class represents the ability to further specify a J1939 DTC in terms of its semantics. | | Aggregated by | DiagnosticTroubleCodeJ1939.kind | | Literal | Description | | serviceOnly | this represents a DTC that is only relevant for service in a garage, reported by e.g. DM53. Tags: atp.EnumerationLiteralIndex=0 | | standard | This represents a non-specific DTC reported by e.g. DM1. Tags: atp.EnumerationLiteralIndex=1 |

属性 DiagnosticTroubleCodeJ1939.fmi 的有效区间:

该规则应在 DEXT 完成时施加。

请注意,[constr_1456] 存在的依据以及属性 fmi 各个值的含义可以在相应的 SAE J1939 [21] 规范中找到。

表4.214:DiagnosticTroubleCodeJ1939(DiagnosticTroubleCodeJ1939)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticTroubleCode | | 说明 | This meta-class represents the ability to model specific trouble-code related properties for J1939. Tags: atp.recommendedPackage=DiagnosticTroubleCodes | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticTroubleCode , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
dtcProps DiagnosticTroubleCode Props 0..1 ref Defined properties associated with the J1939 DTC.
fmi PositiveInteger 0..1 attr This attribute represents the behavior of the Failure Mode Indicator.

表4.215:DiagnosticTroubleCodeJ1939(DiagnosticTroubleCodeJ1939)

属性 类型 多重性 种类 备注
kind DiagnosticTroubleCode J1939DtcKindEnum 0..1 attr This attribute further specifies the DTC in terms of its semantics.
node DiagnosticJ1939Node 0..1 ref This represents the related DiagnosticJ1939Node.
spn DiagnosticJ1939Spn 0..1 ref This represents the releated SPN.

DiagnosticTroubleCodeJ1939 . fmi 属性的存在性:

DiagnosticTroubleCodeJ1939 . spn 属性的存在性:

仅服务 DTC 的定义:

[TPS_DEXT_01107] 所作的陈述需要由两个约束来保障:

仅服务 DTC 应引用一个公共内存区段:

该规则应在 DEXT 完成时施加。

到 DiagnosticMemoryDestination 的引用:

该规则应在 DEXT 完成时施加。

5. 诊断映射

5.1. 简介

本章描述如何将特定诊断资源关联

  • 彼此关联以形成一种新的模型语义,它超越受组合影响的各个诊断资源各自的意义,通常通过 DiagnosticMapping 的专用子类实现;或

  • 与应用软件或基础软件栈中其他位置的模型元素关联。在这种情况下,连接通常通过 DiagnosticSwMapping 的子类创建。

DiagnosticExtract 模板的映射概念被设计为支持诊断需求的分散且独立的定义,这些定义可以在开发过程的后期才链接在一起。

它还支持使用从各种来源收集的映射贡献,以减少 ECU 集成者的手动映射工作。

表5.1:DiagnosticMapping(DiagnosticMapping)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticMapping | | 说明 | Abstract element for different kinds of diagnostic mappings. | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 子类 | CpSwClusterResourceToDiagDataElemMapping, CpSwClusterResourceToDiagFunctionIdMapping, Cp SwClusterToDiagEventMapping, CpSwClusterToDiagRoutineSubfunctionMapping, DiagnosticAuth TransmitCertificateMapping, DiagnosticDemProvidedDataMapping, DiagnosticEventToDebounce AlgorithmMapping, DiagnosticEventToEnableConditionGroupMapping, DiagnosticEventToOperation CycleMapping, DiagnosticEventToSecurityEventMapping, DiagnosticEventToStorageConditionGroup Mapping, DiagnosticEventToTroubleCodeJ1939Mapping, DiagnosticEventToTroubleCodeUdsMapping, DiagnosticFimAliasEventGroupMapping, DiagnosticFimAliasEventMapping, DiagnosticInhibitSource EventMapping, DiagnosticIumprToFunctionIdentifierMapping, DiagnosticJ1939SpnMapping, Diagnostic MasterToSlaveEventMapping, DiagnosticSecureCodingMapping, DiagnosticSecurityEventReporting ModeMapping, DiagnosticSwMapping , DiagnosticTroubleCodeUdsToTroubleCodeObdMapping | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
provider SoftwareCluster CpSoftwareCluster 0..1 ref This reference can be used in an early design phase to associate an element of a diagnostic extract with an existing provided CPSoftwareCluster. Tags: atp.Status=draft
requester SoftwareCluster CpSoftwareCluster 0..1 ref This reference can be used in an early design phase to associate an element of a diagnostic extract with an existing requested CPSoftwareCluster. Tags: atp.Status=draft

诊断资源建模的描述可以粗略分为五个部分:

  • 一个专门用于诊断服务映射的部分,见第 5.2 节。

  • 一个专门用于事件处理上下文中映射的部分,见第 5.3 节。

  • 一个专门用于功能禁用上下文中映射的部分,见第 5.4 节。

  • 一个专门用于 J1939 诊断上下文中映射的部分,见第 5.5 节。

  • 一个专门用于 AUTOSAR 经典平台上软件集群上下文中映射的部分,见第 5.6 节。

5.2. 诊断服务的映射

汽车诊断以可以用 AUTOSAR 元模型形式化的多种方式与应用软件和基础软件交互。本章包含这种交互的形式化描述以及适用的约束。

DiagnosticExtract 引用软件组件的用例:

  • DiagnosticExtract 在由 rootSoftwareComposition 创建的层级结构中所嵌入的 AtomicSwComponentType 的上下文中引用 PortPrototype(用于访问 dataElement)或 SwcServiceDependency。

  • DiagnosticExtract 在由一个(暂时)未被任何地方聚合的 CompositionSwComponentType 所创建的层级结构中所嵌入的 AtomicSwComponentType 的上下文中引用 PortPrototype(用于访问 dataElement)或 SwcServiceDependency。

  • DiagnosticExtract 在一个 AtomicSwComponentType 的上下文中引用 PortPrototype(用于访问 dataElement)或 SwcServiceDependency。

  • DiagnosticExtract 引用一个 BswServiceDependency。

表5.2:SwcServiceDependency(SwcServiceDependency)

| 包 | M2::AUTOSARTemplates::SWComponentTemplate::SwcInternalBehavior::ServiceMapping | | 说明 | Specialization of ServiceDependency in the context of an SwcInternalBehavior. It allows to associate ports, port groups and (in special cases) data defined for an atomic software component to a given ServiceNeeds element. | | 基类 | ARObject , AtpClassifier , AtpFeature , AtpStructureElement , Identifiable , MultilanguageReferrable , Referrable , ServiceDependency | | 聚合于 | AdaptiveSwcInternalBehavior.serviceDependency, AtpClassifier .atpFeature, SwcInternalBehavior. serviceDependency |

属性 类型 多重性 种类 备注
Class SwcServiceDependency
assignedData RoleBasedData Assignment * aggr Defines the role of an associated data object of the same component. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=assignedData, assignedData.variation Point.shortLabel vh.latestBindingTime=preCompileTime
assignedPort RoleBasedPort Assignment * aggr Defines the role of an associated port of the same component. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=assignedPort, assignedPort.variation Point.shortLabel vh.latestBindingTime=preCompileTime
representedPort Group PortGroup 0..1 ref This reference specifies an association between the ServiceNeeeds and a PortGroup, for example to request a communication mode which applies for communication via these ports. The referred PortGroup shall be local to this atomic SWC, but via the links between the Port Groups, a tool can evaluate this information such that all the ports linked via this port group on the same ECU can be found.
serviceNeeds ServiceNeeds 0..1 aggr The associated ServiceNeeds.

表5.3:SwcServiceDependency(SwcServiceDependency)

| 包 | M2::AUTOSARTemplates::BswModuleTemplate::BswBehavior | | 说明 | Specialization of ServiceDependency in the context of an BswInternalBehavior. It allows to associate BswModuleEntries and data defined for a BSW module or cluster to a given ServiceNeeds element. | | 基类 | ARObject , ServiceDependency | | 聚合于 | BswInternalBehavior.serviceDependency |

属性 类型 多重性 种类 备注
assignedData RoleBasedData Assignment * aggr Defines the role of an associated data object (owned by this module or cluster) in the context of the ServiceNeeds element. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=assignedData, assignedData.variation Point.shortLabel vh.latestBindingTime=preCompileTime
assignedEntry Role RoleBasedBswModule EntryAssignment * aggr Defines the role of an associated BswModuleEntry in the context of the ServiceNeeds element. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=assignedEntryRole, assignedEntry Role.variationPoint.shortLabel vh.latestBindingTime=preCompileTime

表5.4:BswServiceDependency(BswServiceDependency)

属性 类型 多重性 种类 备注
ident BswService DependencyIdent 0..1 aggr This adds the ability to become referrable to BswService Dependency. Stereotypes: atpIdentityContributor Tags: xml.sequenceOffset=-100
serviceNeeds ServiceNeeds 0..1 aggr The associated ServiceNeeds.

图 5.1 给出与诊断服务相关的映射类的概览。

请注意,以下角色中的引用

  • DiagnosticServiceDataMapping.diagnosticParameter

  • DiagnosticServiceDataMapping.diagnosticDataElement

  • DiagnosticServiceSwMapping.diagnosticParameter

  • DiagnosticServiceSwMapping.diagnosticDataElement

由于以下可变聚合,在技术上必须成为可变的:

  • DiagnosticDataIdentifier.dataElement,以及

  • DiagnosticParameterIdentifier.dataElement,最后还有

  • DiagnosticAbstractParameter.dataElement。

然而,这样的更改无法以向后兼容的方式实现,而现有的、不够优雅的机制是通过引用以下元素来实现变体点(如适用):

  • DiagnosticServiceDataMapping 和

  • DiagnosticServiceSwMapping

即从 DiagnosticContributionSet 在角色 element 中引用它们,在这个特定情况下被认为危害较小。

换言之,上述引用中缺失的可变性应通过创建附加的 DiagnosticServiceDataMapping 和 DiagnosticServiceSwMapping、并从这些新的映射类实例创建对 DiagnosticDataElement 或 DiagnosticParameterIdent 的引用来补偿。

5.2.1. 诊断服务数据映射

请注意,Dcm 通常既有权读取也有权写入 dataElement。即使相应的 PortPrototype 是 PPortPrototype,这也适用。这意味着诊断服务数据映射仅限于 SenderReceiverInterface。

0..1

DiagnosticServiceDataMapping.parameterElementAccess 的语义:

因此,元类 DiagnosticParameterElementAccess 利用以下引用:

  • contextElement 覆盖在嵌套的数组形状 DiagnosticParameterElement 中提供对数组元素的引用的能力

  • targetElement 定义对最终目标 DiagnosticParameterElement 的引用。

为澄清起见,这意味着对 DiagnosticParameterElement 深度嵌套结构内部的 DiagnosticParameterElement 的引用只需要

targetElement(如果嵌套的 DiagnosticParameterElement 的任何中间层级都不存在数组语义)。

角色 contextElement 中的引用只需要用来标识嵌套结构中间层级上的数组元素。

DiagnosticServiceDataMapping . diagnosticDataElement 的语义:

  • 由 SenderReceiverInterface 定义类型的 PortPrototype 中的一个 dataElement,或

  • 由 NvDataInterface 定义类型的 PortPrototype 中的一个 nvData。

这种数据访问类型适用于诊断服务 ReadDataByIdentifier(0x22)、WriteDataByIdentifier(0x2E)和 InputOutputControl(0x2F)。

表5.5:DiagnosticServiceDataMapping(DiagnosticServiceDataMapping)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticMapping::ServiceMapping | | 说明 | This represents the ability to define a mapping of a diagnostic service to a software-component. This kind of service mapping is applicable for the usage of SenderReceiverInterfaces or event/notifier semantics in ServiceInterfaces on the adaptive platform. Tags: atp.recommendedPackage=DiagnosticServiceMappings | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMapping , DiagnosticSwMapping , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
diagnosticData Element DiagnosticDataElement 0..1 ref This represents the applicable payload that corresponds to the referenced DataPrototype in the role mappedData Element or (in case of a usage on the adaptive platform) mappedApDataElement.
diagnostic Parameter DiagnosticParameter Ident 0..1 ref This represents the applicable payload that corresponds to the referenced DataPrototype in the role mappedData Element. Tags: xml.sequenceOffset=20
mappedData Element DataPrototype 0..1 iref This represents the dataElement in the application software that is accessed for diagnostic purpose. This role is applicable on the classic platform. InstanceRef implemented by: DataPrototypeInSystem InstanceRef
parameter ElementAccess DiagnosticParameter ElementAccess 0..1 aggr This aggregation represents the single point of access to the reference to one specific DiagnosticParameter Element.

表5.6:DiagnosticParameterElementAccess(DiagnosticParameterElementAccess)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticMapping::ServiceMapping | | 说明 | This meta-class acts as a single point for defining structured references to a specific Diagnostic ParameterElement. | | 基类 | ARObject | | 聚合于 | DiagnosticServiceDataMapping.parameterElementAccess, DiagnosticServiceSwMapping.parameter ElementAccess |

属性 类型 多重性 种类 备注
contextElement (ordered) DiagnosticParameter Element * ref This represents the context of an applicable payload that corresponds to the referenced DataPrototype in the role mappedDataElement. Tags: xml.sequenceOffset=10
targetElement DiagnosticParameter Element 0..1 ref This represents the target reference of an applicable payload that corresponds to the referenced Data Prototype in the role mappedDataElement. Tags: xml.sequenceOffset=20

referenced from DiagnosticServiceDataMapping 的存在性:

  • 对 DiagnosticServiceMappingDiagTarget 的引用,即以下之一:

  • 角色 diagnosticDataElement 中对 DiagnosticDataElement 的引用;

  • 角色 diagnosticParameter 中对 DiagnosticParameterIdent 的引用;

  • 以下角色中对 DiagnosticParameterElement 的引用:

  • ∗ contextElement(可选)

  • ∗ targetElement

(来自 parameterElementAccess 内部)

  • 角色 mappedDataElement 中对 DataPrototype 的引用

属性 DiagnosticServiceDataMapping.diagnosticDataElement 与 DiagnosticDataByIdentifier.dataIdentifier 的同时存在:

该规则应在 DEXT 完成时施加。

请注意,[constr_1343] 应只适用于方法论中认为 DiagnosticExtract 已完整到可以派生 Dcm 和 Dem 配置的那个步骤。任何中间步骤(例如从 OEM 交给一级供应商)实际上不强制 [constr_1343]。

换言之,[constr_1343] 确保 DiagnosticServiceDataMapping 与相应的 DiagnosticReadDataByIdentifier 或 DiagnosticWriteDataByIdentifier 之间存在连接。

只有这样,诊断服务才变得完全可用。

引用 DiagnosticServiceDataMapping.mappedDataElement 的建模只支持目标 DataPrototype 由 ApplicationDataType 定义类型的情况。

表5.7:ApplicationPrimitiveDataType(ApplicationPrimitiveDataType)

| 包 | M2::AUTOSARTemplates::SWComponentTemplate::Datatype::Datatypes | | 说明 | A primitive data type defines a set of allowed values. Tags: atp.recommendedPackage=ApplicationDataTypes | | 基类 | ARElement , ARObject , ApplicationDataType , AtpBlueprint , AtpBlueprintable , AtpClassifier , AtpType , AutosarDataType , CollectableElement , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

表5.8:ApplicationPrimitiveDataType(ApplicationPrimitiveDataType)

| 包 | M2::AUTOSARTemplates::CommonStructure::ImplementationDataTypes | | 说明 | Describes a reusable data type on the implementation level. This will typically correspond to a typedef in C-code. Tags: atp.recommendedPackage=ImplementationDataTypes | | 基类 | ARElement , ARObject , AbstractImplementationDataType , AtpBlueprint , AtpBlueprintable , AtpClassifier , AtpType , AutosarDataType , CollectableElement , Identifiable , MultilanguageReferrable , Packageable Element , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
dynamicArray SizeProfile String 0..1 attr Specifies the profile which the array will follow in case this data type is a variable size array.
isStructWith Optional Element Boolean 0..1 attr This attribute is only valid if the attribute category is set to STRUCTURE. If set to true, this attribute indicates that the ImplementationDataType has been created with the intention to define at least one element of the structure as optional.
subElement (ordered) ImplementationData TypeElement * aggr Specifies an element of an array, struct, or union data type. The aggregation of ImplementionDataTypeElement is subject to variability with the purpose to support the conditional existence of elements inside a Implementation DataType representing a structure. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=subElement.shortName, sub Element.variationPoint.shortLabel vh.latestBindingTime=preCompileTime

表5.9:ImplementationDataType(ImplementationDataType)

属性 类型 多重性 种类 备注
symbolProps SymbolProps 0..1 aggr This represents the SymbolProps for the Implementation DataType. Stereotypes: atpSplitable Tags: atp.Splitkey=symbolProps.shortName
typeEmitter NameToken 0..1 attr This attribute is used to control which part of the AUTOSAR toolchain is supposed to trigger data type definitions.

关于数据类型 category 的值的含义的详细解释请参见 [9]。

DiagnosticDataElement 不应(最终)被 DiagnosticRoutine 聚合:

该规则应在 DEXT 完成时施加。

Dem 使用 DiagnosticServiceDataMapping:

因此,[constr_1345] 有意不排除在 DiagnosticServiceDataMapping 上下文中 DiagnosticExtendedDataRecord 对 DiagnosticDataElement 的聚合。

表5.10:ApplicationSwComponentType(ApplicationSwComponentType)

| 包 | M2::AUTOSARTemplates::SWComponentTemplate::Components | | 说明 | The ApplicationSwComponentType is used to represent the application software. Tags: atp.recommendedPackage=SwComponentTypes | | 基类 | ARElement , ARObject , AtomicSwComponentType , AtpBlueprint , AtpBlueprintable , AtpClassifier , Atp Type , CollectableElement , Identifiable , MultilanguageReferrable , PackageableElement , Referrable , Sw ComponentType | | 聚合于 | ARPackage.element |

DiagnosticDataElement 在 I/O 控制实例中不应被使用多于一次:

该规则应在 DEXT 完成时施加。

reference to DiagnosticParameterIdent in the role diagnosticParameter 的存在性:

这意味着组合 DataPrototype 的元素将从被引用 DiagnosticParameter 的 bitOffset 开始依次放置。

将 DiagnosticServiceDataMapping 应用于 DiagnosticParameter 嵌套定义的示例见第 B.2 节。

5.2.2. 面向 OBD 的诊断服务数据映射

OBD 模式 0x01 的 DiagnosticParameterIdentifier 服务映射:

  • 被同一 DiagnosticServiceSwMapping 或 DiagnosticServiceDataMapping 引用的 SwcServiceDependency 应在角色 serviceNeeds 中聚合一个 ObdPidServiceNeeds。

  • 被同一 DiagnosticServiceSwMapping 引用的 BswServiceDependencyIdent 应在角色 serviceNeeds 中聚合一个 ObdPidServiceNeeds。

该规则应在 DEXT 完成时施加。

OBD 模式 0x09 的 DiagnosticInfoType 服务映射:

  • 被同一 DiagnosticServiceSwMapping 引用的 SwcServiceDependency 应在角色 serviceNeeds 中聚合一个 ObdInfoServiceNeeds。

  • 被同一 DiagnosticServiceSwMapping 引用的 BswServiceDependencyIdent 应在角色 serviceNeeds 中聚合一个 ObdInfoServiceNeeds。

该规则应在 DEXT 完成时施加。

OBD 模式 0x08 的 DiagnosticInfoType 服务映射:

该规则应在 DEXT 完成时施加。

表5.11:ObdInfoServiceNeeds(ObdInfoServiceNeeds)

| 包 | M2::AUTOSARTemplates::CommonStructure::ServiceNeeds | | 说明 | Specifies the abstract needs of a component or module on the configuration of OBD Services in relation to a given InfoType (OBD Service 09) which is supported by this component or module. | | 基类 | ARObject , DiagnosticCapabilityElement , Identifiable , MultilanguageReferrable , Referrable , Service Needs | | 聚合于 | BswServiceDependency.serviceNeeds, SwcServiceDependency.serviceNeeds |

表5.12:ObdPidServiceNeeds(ObdPidServiceNeeds)

| 包 | M2::AUTOSARTemplates::CommonStructure::ServiceNeeds | | 说明 | Specifies the abstract needs of a component or module on the configuration of OBD Services in relation to a particular PID (parameter identifier) which is supported by this component or module. In case of using a client/server communicated value, the related value shall be communicated via the port referenced by assignedPort. The details of this communication (e.g. appropriate naming conventions) are specified in the related software specifications (SWS). | | 基类 | ARObject , DiagnosticCapabilityElement , Identifiable , MultilanguageReferrable , Referrable , Service Needs | | 聚合于 | BswServiceDependency.serviceNeeds, SwcServiceDependency.serviceNeeds |

表5.13:ObdControlServiceNeeds(ObdControlServiceNeeds)

| 包 | M2::AUTOSARTemplates::CommonStructure::ServiceNeeds | | 说明 | Specifies the abstract needs of a component or module on the configuration of OBD Service 08 (request control of on-board system) in relation to a particular test-Identifier (TID) supported by this component or module. | | 基类 | ARObject , DiagnosticCapabilityElement , Identifiable , MultilanguageReferrable , Referrable , Service Needs | | 聚合于 | BswServiceDependency.serviceNeeds, SwcServiceDependency.serviceNeeds |

DiagnosticServiceMappingDiagTarget 的用途:

为了便于处理和描述这种关系,定义了抽象类 DiagnosticServiceMappingDiagTarget。

DiagnosticServiceMappingDiagTarget 的建模勾勒于图 5.3。

表5.14:DiagnosticServiceMappingDiagTarget(DiagnosticServiceMappingDiagTarget)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticMapping::ServiceMapping | | 说明 | This meta-class serves as a base class for diagnostics-related targets of subclasses of DiagnosticSw Mapping | | 基类 | ARObject | | 子类 | DiagnosticDataElement, DiagnosticParameterElement, DiagnosticParameterIdent |

利用 DiagnosticServiceMappingDiagTarget 的概念,在该映射的配置中必须根据通信的方向考虑不同的情况。

第一种情况影响从应用读取数据到 DID。这种情况下创建 DiagnosticServiceSwMapping 和 DiagnosticServiceDataMapping 的适用建模选项由 [TPS_DEXT_01184] 描述。

在 [TPS_DEXT_01184] 中,标记为 “Symmetric Read/Write possible” 的列指示是否可以将接收到的信息写回应用。

[TPS_DEXT_01184] 从应用读取数据的用例

| Source mappedDataElement / accessedDataPrototype | Target DiagnosticServiceMappingDiagTarget |

| primitive or flat array | DiagnosticDataElement | | composite | DiagnosticParameterIdent | | element of composite | DiagnosticDataElement | | element of composite | DiagnosticParameterElement |

第二种情况影响从 DID 向应用写入数据。这种情况下创建 DiagnosticServiceSwMapping 和 DiagnosticServiceDataMapping 的适用建模选项由 [TPS_DEXT_01185] 描述。

向应用写入数据的用例:

| Source DiagnosticServiceMappingDiagTarget | Target mappedDataElement / accessedDataPrototype |

| DiagnosticDataElement | primitive or flat array | | DiagnosticParameterIdent | composite | | DiagnosticParameterElement | Element of composite | | DiagnosticParameterElement | primitive |

在 [TPS_DEXT_01185] 中,标记为 “Symmetric Read/Write possible” 的列指示是否可以从应用读回接收到的信息。

5.2.3. 诊断服务软件映射

诊断服务软件映射仅限于 ClientServerInterface 或直接函数调用(在基础软件或复杂驱动程序的情况下)。

表5.15:ClientServerInterface(ClientServerInterface)

| 包 | M2::AUTOSARTemplates::SWComponentTemplate::PortInterface | | 说明 | A client/server interface declares a number of operations that can be invoked on a server by a client. Tags: atp.recommendedPackage=PortInterfaces | | 基类 | ARElement , ARObject , AtpBlueprint , AtpBlueprintable , AtpClassifier , AtpType , CollectableElement Identifiable , MultilanguageReferrable , PackageableElement , PortInterface , Referrable | | 聚合于 | ARPackage.element |

表5.16:ClientServerInterface(ClientServerInterface)

属性 类型 多重性 种类 备注
operation ClientServerOperation * aggr ClientServerOperation(s) of this ClientServerInterface. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=operation.shortName, operation.variation Point.shortLabel vh.latestBindingTime=blueprintDerivationTime
possibleError ApplicationError * aggr Application errors that are defined as part of this interface.

以下约束只适用于通过 sender-receiver 通信实现 I/O 控制的情况(见 [TPS_SWCT_01654])

DiagnosticServiceSwMapping 的目的:

需要根据外围 AtomicSwComponentType 的上下文使用适用形式的对目标 SwcServiceDependency 的引用。

对应用中数据的访问使用 client/server 通信实现,即信息通过由 ClientServerOperation 拥有的 ArgumentDataPrototype 传递。

原则上,从应用获得的信息可以由任意结构的组合数据类型定义类型。在应用上下文中定义的组合数据类型可能与相应 DiagnosticAbstractDataIdentifier(或 DiagnosticRoutineSubfunction)内部的嵌套结构相关联,并且可能只有组合数据类型的一个子集与 DiagnosticAbstractDataIdentifier / DiagnosticRoutineSubfunction 嵌套定义的 DiagnosticParameterElement 相关联。

因此,在从复杂类型到嵌套 DID 结构的映射的情况下,DiagnosticServiceSwMapping 的目的不仅是标识 DiagnosticParameterElement,还要标识组合 ArgumentDataPrototype 内部的 DataPrototype。

references to subclasses of DiagnosticServiceMappingDiagTarget 的存在性:

diagnosticDataElement:如果映射影响一个原始 DataPrototype 或一个表示原始 AutosarDataType 数组的 DataPrototype(它被映射到一个不属于嵌套 DiagnosticParameter 成员的 DiagnosticDataElement),则该引用是首选方法。

parameterElementAccess:该聚合保留用于 DataPrototype 被映射到 DiagnosticParameter 嵌套定义内部的一个层级的情况,即如果 DiagnosticParameter.ident.subElement 存在。

在这种情况下,引用 accessedDataPrototype 也应存在,以定义组合 AutosarDataType 中与被引用的 parameterElementAccess.targetElement 对应的元素。

  • diagnosticParameter:如果一个 DataPrototype 应被映射到根 DiagnosticParameter(它定义一个嵌套子结构,即在这种情况下 DiagnosticParameter.ident.subElement 应存在),则该选项适用。

在这种情况下,组合 DataPrototype 的结构应与 DiagnosticParameter 的嵌套结构匹配,且 DiagnosticParameterElement 的放置不应有任何间隙。

引用 DiagnosticServiceSwMapping.accessedDataPrototype 存在的用例:

  • 被引用的 diagnosticDataElement(即映射到外围 DiagnosticAbstractDataIdentifier / DiagnosticRoutineSubfunction 的扁平原始元素),或

  • 被引用的 parameterElementAccess.targetElement(即映射到外围 DiagnosticAbstractDataIdentifier / DiagnosticRoutineSubfunction 内部嵌套结构的一个元素)。

表5.17:DiagnosticSwMapping(DiagnosticSwMapping)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticMapping | | 说明 | This represents the ability to define a mapping between a diagnostic information (at this point there is no way to become more specific about the semantics) to a software-component. | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMapping , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 子类 | DiagnosticEnableConditionPortMapping, DiagnosticEventPortMapping, DiagnosticFimFunctionMapping, DiagnosticJ1939SwMapping, DiagnosticOperationCyclePortMapping, DiagnosticServiceDataMapping, DiagnosticServiceSwMapping, DiagnosticStorageConditionPortMapping | | 聚合于 | ARPackage.element |

表5.18:DiagnosticSwMapping(DiagnosticSwMapping)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticMapping::ServiceMapping | | 说明 | This represents the ability to define a mapping of a diagnostic service to a software-component or a basic-software module. If the former is used then this kind of service mapping is applicable for the usage of ClientServerInterfaces. Tags: atp.recommendedPackage=DiagnosticServiceMappings | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMapping , DiagnosticSwMapping , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
accessedData Prototype DataPrototype 0..1 iref Thi instanceRef identifies the DataPrototype that is supposed to be accessed in the context of the operation argument. InstanceRef implemented by: DataPrototypeInClient ServerInterfaceInstanceRef
diagnosticData Element DiagnosticDataElement 0..1 ref This represents a DiagnosticDataElement required to execute the respective diagnostic service in the context of the diagnostic service mapping,
diagnostic Parameter DiagnosticParameter Ident 0..1 ref This represents the applicable payload that corresponds to the referenced DataPrototype in the role mappedData Element.
mappedBsw Service Dependency BswService DependencyIdent 0..1 ref This is supposed to represent a reference to a Bsw ServiceDependency. the latter is not derived from Referrable and therefore this detour needs to be implemented to still let BswServiceDependency become the target of a reference.

表5.19:DiagnosticServiceSwMapping(DiagnosticServiceSwMapping)

属性 类型 多重性 种类 备注
mappedFlatSwc Service Dependency SwcService Dependency 0..1 ref This represents the ability to refer to an AtomicSw ComponentType that is available without the definition of how it will be embedded into the component hierarchy.
mappedSwc Service DependencyIn System SwcService Dependency 0..1 iref This represents the ability to point into the component hierarchy (under possible consideration of the root SoftwareComposition) InstanceRef implemented by: SwcServiceDependency InSystemInstanceRef
parameter ElementAccess DiagnosticParameter ElementAccess 0..1 aggr This aggregation represents the single point of access to the reference to one specific DiagnosticParameter Element.
serviceInstance DiagnosticService Instance 0..1 ref This represents the service instance that needs to be considered in this diagnostics service mapping.

BswServiceDependency 需要充当引用的目标:

然而,BswServiceDependency 不是派生自元类 Referrable,因此永远无法成为像 DiagnosticServiceSwMapping.mappedBswServiceDependency 这样的引用的目标。

针对该问题的补救办法是定义元类 BswServiceDependencyIdent,它继承自 IdentCaption,而 IdentCaption 又继承自 Referrable。

然后,通过在 BswServiceDependency 的角色 ident 中聚合 BswServiceDependencyIdent,BswServiceDependency 事实上的确可以成为引用的目标,从而 DiagnosticServiceSwMapping.mappedBswServiceDependency 的最初想法变得可行。

更多细节见图 5.4。

请注意,[TPS_DEXT_01044] 的引入虽然非常接近于一种取巧(hack),但对于保持 AUTOSAR XML 模式完全向后兼容是必要的。

换言之,如果更新 BswServiceDependency 使其继承自 Referrable,后果将是:所有包含 BswServiceDependency 实例的现有 AUTOSAR 模型会突然失效,因为 Referrable.shortName 是 AUTOSAR XML 模式中的强制属性。

表5.20:BswServiceDependencyIdent(BswServiceDependencyIdent)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticMapping::ServiceMapping | | 说明 | This meta-class is created to add the ability to become the target of a reference to the non-Referrable BswServiceDependency. |

表5.21:BswServiceDependencyIdent(BswServiceDependencyIdent)

| 基类 | ARObject , AtpClassifier , AtpFeature , AtpStructureElement , IdentCaption , Identifiable , Multilanguage Referrable , Referrable | | 聚合于 | AtpClassifier .atpFeature, BswServiceDependency.ident |

DiagnosticServiceSwMapping.serviceInstance 的允许值:

按照 AUTOSAR 标准的规定,DiagnosticServiceSwMapping.serviceInstance 应只指向 DiagnosticServiceInstance 的以下子类:

  • DiagnosticRoutine

  • DiagnosticSecurityAccess

  • DiagnosticReadDataByIdentifier

  • DiagnosticWriteDataByIdentifier

  • DiagnosticIOControl

该规则应在 DEXT 完成时施加。

attributes of DiagnosticServiceSwMapping 的存在性:

  • DiagnosticServiceSwMapping.mappedFlatSwcServiceDependency

  • DiagnosticServiceSwMapping.mappedSwcServiceDependencyInSystem

  • DiagnosticServiceSwMapping.mappedBswServiceDependency

该规则应在 DEXT 完成时施加。

5.2.4. 诊断安全编码

术语 “安全编码(secure coding)” 描述一种向 ECU 的非易失性内存写入数据的过程,该数据经车辆制造商认证,因此阻止未经授权者的写访问。

编码数据通常包含车辆配置信息,可用于激活 ECU 软件中的功能或改变其行为。

配置信息被持久化,ECU 应用动态读取该信息以使行为适应各个配置。

为使车辆制造商控制谁在写入哪些数据,ECU 应只接受由车辆制造商私钥签名的编码数据。在这一序列中,在写入安全数据之前需要一个包含公钥的车辆制造商证书。

下一步,配置数据被写入临时内存,只有当签名与证书的公钥匹配有效时,数据才被接受并持久化。

从 DiagnosticSecureCodingMapping 到 DiagnosticRoutine 的引用:

终结(finalization)主要包括对该过程的验证以及在成功验证后编码信息的持久存储。

5.2.5. 诊断认证发送证书映射

DiagnosticAuthTransmitCertificateMapping 的语义:

表5.22:DiagnosticAuthTransmitCertificateMapping(DiagnosticAuthTransmitCertificateMapping)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticMapping | | 说明 | This meta-class represents the ability to associate a CryptoServiceCertificate with a DiagnosticAuth CertificateEvaluation with the purpose to configure the evaluation of the certificate. Tags: atp.recommendedPackage=DiagnosticMappings | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMapping , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
cryptoService Certificate CryptoService Certificate * ref This reference identifies the description of the applicable crypto certificate.
serviceInstance DiagnosticAuthTransmit CertificateEvaluation 0..1 ref This reference identifies the applicable DiagnosticAuth TransmitCertificate service instance (via the aggregation in the role certificateEvaluation).

5.2.6. 安全事件报告模式映射

特定安全事件(见 [22])的报告模式可以通过诊断服务更新。

元类 DiagnosticSecurityEventReportingModeMapping 的语义:

从建模的角度来看,这一关系通过元类 DiagnosticSecurityEventReportingModeMapping 创建。

必须理解,该映射用于将两个基础软件模块之间的关系形式化。这种关系不涉及任何应用软件。

表5.23:DiagnosticSecurityEventReportingModeMapping(DiagnosticSecurityEventReportingModeMapping)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticMapping::ServiceMapping | | 说明 | This meta-class represents the ability to associate a location in a DID with a security event. The purpose of this mapping is that the location in the DID contains the setting of the reporting mode for the specific security event. This means that the reporting mode of the security event can be set via the diagnostic service WriteDataByIdentifier. Tags: atp.Status=candidate atp.recommendedPackage=DiagnosticMappings | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMapping , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
dataElement DiagnosticDataElement 0..1 ref This reference identifies the data element that carries the information about the reporting mode. Tags: atp.Status=candidate
securityEvent SecurityEventContext Props 0..1 ref This reference identifies the mapped security event. Tags: atp.Status=candidate

角色 DiagnosticSecurityEventReportingModeMapping.dataElement 中引用的存在性:

角色 DiagnosticSecurityEventReportingModeMapping.securityEvent 中引用的存在性:

5.3. 事件相关的诊断映射

本章描述诊断事件描述上下文中的各种映射(见图 5.7)。

两种映射:

  • DiagnosticEvent 与另一个诊断资源之间的映射。为此使用 DiagnosticMapping 的一个子类。

  • DiagnosticEvent 与 SWC 服务端口之间的映射。为此使用 DiagnosticSwMapping 的一个子类。

图 5.7 给出可用于诊断事件处理的不同映射类型的概览。

5.3.1. DiagnosticEvent 到 DtcUds 的映射

DiagnosticEventToTroubleCodeUdsMapping 的语义:

在 n:1 的情况下,必须定义多个 DiagnosticEventToTroubleCodeUdsMapping 实例,它们具有相同的角色 troubleCodeUds 引用但不同的角色 diagnosticEvent 引用。

表5.24:DiagnosticEventToTroubleCodeUdsMapping(DiagnosticEventToTroubleCodeUdsMapping)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticMapping | | 说明 | Defines which UDS Diagnostic Trouble Code is applicable for a DiagnosticEvent. Tags: atp.recommendedPackage=DiagnosticMappings | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMapping , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
diagnosticEvent DiagnosticEvent 0..1 ref Reference to a DiagnosticEvent to which a UDS Diagnostic Trouble Code is assigned.
troubleCodeUds DiagnosticTroubleCode Uds 0..1 ref Reference to an UDS Diagnostic Trouble Code assigned to a DiagnosticEvent.

5.3.2. DiagnosticEvent 到 DiagnosticOperationCycle 的映射

表5.25:DiagnosticEventToOperationCycleMapping(DiagnosticEventToOperationCycleMapping)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticMapping | | 说明 | Defines which OperationCycle is applicable for a DiagnosticEvent. Tags: atp.recommendedPackage=DiagnosticMappings | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMapping , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
diagnosticEvent DiagnosticEvent 0..1 ref Reference to a DiagnosticEvent to which an Operation Cycle is assigned.
operationCycle DiagnosticOperation Cycle 0..1 ref Reference to an OperationCycle assigned to a Diagnostic Event.

5.3.3. DiagnosticEvent 到防抖算法的映射

DiagnosticEvent 与 DiagnosticDebounceAlgorithmProps:

DiagnosticEventToDebounceAlgorithmMapping 的存在性:

表5.26:DiagnosticEventToDebounceAlgorithmMapping(DiagnosticEventToDebounceAlgorithmMapping)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticMapping | | 说明 | Defines which Debounce Algorithm is applicable for a DiagnosticEvent. Tags: atp.recommendedPackage=DiagnosticMappings | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMapping , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
debounce Algorithm DiagnosticDebounce AlgorithmProps 0..1 ref Reference to a DebounceAlgorithm assigned to a DiagnosticEvent.
diagnosticEvent DiagnosticEvent 0..1 ref Reference to a DiagnosticEvent to which a Debounce Algorithm is assigned.

关于防抖行为形式化的细节描绘于图 4.65。

特别是,DiagnosticCommonProps 在角色 debounceAlgorithmProps 中聚合 DiagnosticDebounceAlgorithmProps。DiagnosticDebounceAlgorithmProps 本身实际上不代表防抖算法,而是提供与实际防抖算法相关的属性。

5.3.4. DiagnosticEvent 到使能条件组的映射

EnableCondition 必须放入 DiagnosticEnableConditionGroup:

每个 DiagnosticEvent 的 DiagnosticEventToEnableConditionGroupMapping 元素数量:

如果定义了多个引用同一 DiagnosticEvent 的 DiagnosticEventToEnableConditionGroupMapping 元素,则使能条件组映射应被视为有缺陷。

该规则应在 DEXT 完成时施加。

表5.27:DiagnosticEventToEnableConditionGroupMapping(DiagnosticEventToEnableConditionGroupMapping)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticMapping | | 说明 | Defines which EnableConditionGroup is applicable for a DiagnosticEvent. Tags: atp.recommendedPackage=DiagnosticMappings | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMapping , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
diagnosticEvent DiagnosticEvent 0..1 ref Reference to a DiagnosticEvent to which an Enable ConditionGroup is assigned.
enableCondition Group DiagnosticEnable ConditionGroup 0..1 ref Reference to an EnableConditionGroup assigned to a DiagnosticEvent.

5.3.5. DiagnosticEvent 到存储条件组的映射

StorageCondition 必须放入 DiagnosticStorageConditionGroup:

每个 DiagnosticEvent 的 DiagnosticEventToStorageConditionGroupMapping 元素数量:

如果定义了多个引用同一 DiagnosticEvent 的 DiagnosticEventToStorageConditionGroupMapping 元素,则存储条件组映射应被视为有缺陷。

该规则应在 DEXT 完成时施加。

各个 DiagnosticStorageCondition 的值:

为此应实现的算法记录在 [SWS_Dem_00459] 中。

表5.28:DiagnosticEventToStorageConditionGroupMapping(DiagnosticEventToStorageConditionGroupMapping)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticMapping | | 说明 | Defines which StorageConditionGroup is applicable for a DiagnosticEvent. Tags: atp.recommendedPackage=DiagnosticMappings | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMapping , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
diagnosticEvent DiagnosticEvent 0..1 ref Reference to a DiagnosticEvent to which a Storage ConditionGroup is assigned.
storage ConditionGroup DiagnosticStorage ConditionGroup 0..1 ref Reference to a StorageConditionGroup assigned to a DiagnosticEvent.

5.3.6. DiagnosticEvent 到端口的映射

DiagnosticEventPortMapping 的语义:

This is realized by defining a DiagnosticEventPortMapping referencing a DiagnosticEvent and (using glyph[lessmuch] instanceRef glyph[greatermuch] ) an instance of SwcServiceDependency (or BswServiceDependency ). glyph[floorright] (RS_DEXT_00023, RS_DEXT_00052)

如果这样的实例尚不可用,也可以改为给出对 SwcServiceDependency 的普通引用(即不指定特定实例)。

这样,ECU 集成者能够在 ECU 配置期间直接派生 SWC(或 BSW)服务端口与服务组件端口之间的实际映射。

0..1

[constr_1435] 存在 DiagnosticEventPortMapping 时的防抖

假定引用 DiagnosticEventPortMapping.swcServiceDependencyInSystem 或 swcFlatServiceDependency 的目标聚合一个 DiagnosticEventNeeds。

该规则应在 DEXT 完成时施加。

表5.29:DiagnosticEventPortMapping(DiagnosticEventPortMapping)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticMapping | | 说明 | Defines to which SWC service ports the DiagnosticEvent is mapped. Tags: atp.recommendedPackage=DiagnosticMappings | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMapping , DiagnosticSwMapping , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
bswService Dependency BswService DependencyIdent 0..1 ref Reference to a BswServiceDependency that links Service Needs to BswModuleEntries.
diagnosticEvent DiagnosticEvent 0..1 ref Reference to the DiagnosticEvent that is assigned to SWC service ports.
swcFlatService Dependency SwcService Dependency 0..1 ref Reference to a SwcServiceDependencyType that links ServiceNeeds to SWC service ports.
swcService DependencyIn System SwcService Dependency 0..1 iref Instance reference to a SwcServiceDependency that links ServiceNeeds to SWC service ports. InstanceRef implemented by: SwcServiceDependency InSystemInstanceRef

reference DiagnosticEventPortMapping . diagnosticEvent 的存在性:

references owned by DiagnosticEventPortMapping 的存在性:

  • 到角色 bswServiceDependency 中的 BswServiceDependency

  • 到角色 swcFlatServiceDependency 中的 SwcServiceDependency

  • 到角色 swcServiceDependencyInSystem 中的 SwcServiceDependency

应在 DEXT 完成时存在。

5.3.7. DiagnosticOperationCycle 到端口的映射

DiagnosticOperationCyclePortMapping 的语义:

这通过定义一个引用 DiagnosticOperationCycle 和一个 SwcServiceDependency 实例的 DiagnosticOperationCyclePortMapping 来实现。

如果这样的实例尚不可用,也可以改为给出对 SwcServiceDependency 的普通引用(即不指定特定实例)。

表5.30:DiagnosticOperationCyclePortMapping(DiagnosticOperationCyclePortMapping)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticMapping | | 说明 | Defines to which SWC service ports the DiagnosticOperationCycle is mapped. Tags: atp.recommendedPackage=DiagnosticMappings | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMapping , DiagnosticSwMapping , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
operationCycle DiagnosticOperation Cycle 0..1 ref Reference to the DiagnosticOperationCycle that is assigned to SWC service ports.
swcFlatService Dependency SwcService Dependency 0..1 ref Reference to a SwcServiceDependencyType that links ServiceNeeds to SWC service ports.
swcService DependencyIn System SwcService Dependency 0..1 iref Instance reference to a SwcServiceDependency that links ServiceNeeds to SWC service ports. InstanceRef implemented by: SwcServiceDependency InSystemInstanceRef

reference DiagnosticOperationCyclePortMapping . operationCycle 的存在性:

角色 operationCycle 中对 DiagnosticOperationCycle 的引用应在 DEXT 完成时存在。

references owned by DiagnosticOperationCyclePortMapping 的存在性:

  • 到角色 swcFlatServiceDependency 中的 SwcServiceDependency

  • 到角色 swcServiceDependencyInSystem 中的 SwcServiceDependency

应在 DEXT 完成时存在。

5.3.8. DiagnosticEnableCondition 到端口的映射

DiagnosticEnableConditionPortMapping 的语义:

如果这样的实例尚不可用,也可以改为给出对 SwcServiceDependency 的普通引用(即不指定特定实例)。

references owned by DiagnosticEnableConditionPortMapping 的存在性:

  • 到角色 swcFlatServiceDependency 中的 SwcServiceDependency

  • 到角色 swcServiceDependencyInSystem 中的 SwcServiceDependency

可在 DEXT 完成时存在。

表5.31:DiagnosticEnableConditionPortMapping(DiagnosticEnableConditionPortMapping)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticMapping | | 说明 | Defines to which SWC service ports the DiagnosticEnableCondition is mapped. Tags: atp.recommendedPackage=DiagnosticMappings | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMapping , DiagnosticSwMapping , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

表5.32:DiagnosticEnableConditionPortMapping(DiagnosticEnableConditionPortMapping)

属性 类型 多重性 种类 备注
enableCondition DiagnosticEnable Condition 0..1 ref Reference to the EnableCondition which is mapped to a SWC service port.
swcFlatService Dependency SwcService Dependency 0..1 ref Reference to a SwcServiceDependencyType that links ServiceNeeds to SWC service ports. This reference can be used in early stages of the development in order to identify the SwcServiceDependency without a full System Context.
swcService DependencyIn System SwcService Dependency 0..1 iref Instance reference to a SwcServiceDependency that links ServiceNeeds to SWC service ports. InstanceRef implemented by: SwcServiceDependency InSystemInstanceRef

reference DiagnosticEnableConditionPortMapping . enableCondition 的存在性:

5.3.9. DiagnosticStorageCondition 到端口的映射

DiagnosticStorageConditionPortMapping 的语义:

如果这样的实例尚不可用,也可以改为给出对 SwcServiceDependency 的普通引用(即不指定特定实例)。

references owned by DiagnosticStorageConditionPortMapping 的存在性:

  • 到角色 swcFlatServiceDependency 中的 SwcServiceDependency

  • 到角色 swcServiceDependencyInSystem 中的 SwcServiceDependency

可在 DEXT 完成时存在。

表5.33:DiagnosticStorageConditionPortMapping(DiagnosticStorageConditionPortMapping)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticMapping | | 说明 | Defines to which SWC service ports with DiagnosticStorageConditionNeeds the DiagnosticStorage Condition is mapped. Tags: atp.recommendedPackage=DiagnosticMappings | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMapping , DiagnosticSwMapping , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
diagnostic Storage Condition DiagnosticStorage Condition 0..1 ref Reference to the StorageCondition which is mapped to a SWC service port with DiagnosticStorageCondition Needs.
swcFlatService Dependency SwcService Dependency 0..1 ref Reference to a SwcServiceDependencyType that links ServiceNeeds to SWC service ports.
swcService DependencyIn System SwcService Dependency 0..1 iref Instance reference to a SwcServiceDependency that links ServiceNeeds to SWC service ports. InstanceRef implemented by: SwcServiceDependency InSystemInstanceRef

reference DiagnosticStorageConditionPortMapping . diagnosticStorageCondition 的存在性:

5.3.10. Dem 提供的数据映射

DiagnosticDemProvidedDataMapping 的语义:

然而,该映射的特殊之处在于:映射中应出现的第二个元素(DiagnosticDemProvidedDataMapping.dataProvider)无法精确地建模为单个元类。

因此,没有比用 NameToken 建模 DiagnosticDemProvidedDataMapping.dataProvider 更好的办法了。

该映射的语义是进一步限定 Dem 内部对角色 dataElement 中引用的 DiagnosticDataElement 的访问。

[TPS_DEXT_01142] 属性 DiagnosticDemProvidedDataMapping.dataProvider 的标准化值:

| Standardized value | Description |

| DEM_AGINGCTR_DOWNCNT | Map down-counting Dem-internal aging counter. | | DEM_AGINGCTR_UPCNT | Map up-counting Dem-internal aging counter. | | DEM_AGINGCTR_UPCNT_FIRST_ACTIVE | Map up-counting Dem-internal aging counter, starting at 1 when aging starts. | | DEM_CLR_DIST | Distance since diagnostic trouble codes cleared. | | DEM_CLR_TIME | Time since diagnostic trouble codes cleared. | | DEM_CURRENT_FDC | Map Dem-internal fault detection counter. | | DEM_CYCLES_SINCE_FIRST_FAILED | Map Dem-internal Operation Cycle Counter - cycles since first failed. | | DEM_CYCLES_SINCE_LAST_FAILED | Map Dem-internal Operation Cycle Counter - cycles since last failed. | | DEM_DTC_PRIORITY | DTC priority statically assigned to this DTC. | | DEM_FAILED_CYCLES | Map Dem-internal Operation Cycle Counter - failed cycles. | | DEM_MAX_FDC_DURING_CURRENT_CYCLE | Map Dem-internal DTC Fault Detection Counter maximum value during current operation cycle. | | DEM_MAX_FDC_SINCE_LAST_CLEAR | Map Dem-internal DTC Fault Detection Counter maximum value since last clear. | | DEM_MIL_DIST | Distance traveled While MIL is activated. | | DEM_MIL_TIME | Time run by the engine while MIL is activated. | | DEM_OCCCTR | Map Dem-internal occurrence counter. | | DEM_OVFLIND | Map Dem-internal overflow indication. | | DEM_SIGNIFICANCE | Map (static) Dem-internal event significance. | | DEM_WARM_UPS | Number of warm-ups since diagnostic trouble codes cleared. | | DEM_J1939LAMP_STATUS | Current state of applicable lamp(s) for this DTC in SAE J1939 DM31 format. | | DEM_EVENT_ASSOCIATED_IDENTIFICATION | Static event identification value associated to an event, see [TPS_DEXT_01151]. | | IN_USE_MONITOR_PERFORMANCE_RATIO | IUMPR ratio according to SAE J1979-2 [24]. | | DIAGNOSTIC_TEST_RESULT | DTR test values according to SAE J1979-2 [24]. | | MONITOR_ACTIVITY_DATA | Monitor activity data according to SAE J1979-2 [24]. |

请注意,如适用,AUTOSAR 允许使用属性 DiagnosticDemProvidedDataMapping.dataProvider 的 [TPS_DEXT_01142] 标准化值以外的值。

但是在这种情况下,属性 DiagnosticDemProvidedDataMapping.dataProvider 的专有值应加上公司特定的名称片段前缀,以避免 AUTOSAR 标准自身声称的可能值列表将来扩展时可能发生的冲突。

内部数据元素仅用于扩展数据记录:

该规则应在 DEXT 完成时施加。

表5.34:DiagnosticDemProvidedDataMapping(DiagnosticDemProvidedDataMapping)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticMapping::ServiceMapping | | 说明 | This represents the ability to define the nature of a data access for a DiagnosticDataElement in the Dem. Tags: atp.recommendedPackage=DiagnosticServiceMappings | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMapping , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
dataElement DiagnosticDataElement 0..1 ref This represents the DiagnosticDataElement for which the access is further qualified by the DiagnosticDemProvided DataMapping.
dataProvider NameToken 0..1 attr This represents the ability to further specify the access within the Dem.

reference DiagnosticDemProvidedDataMapping . dataElement 的存在性:

5.3.11. 主到从事件映射

AUTOSAR 提供将多个诊断事件关联起来的能力:来自诊断监视器的一个事件(也称主事件,master event)的报告自动触发一个或多个其他诊断事件(也称从事件,slave event)以相同测试结果的报告。

请注意,DiagnosticMasterToSlaveEventMapping 的存在主要源于需要将事件报告的结果同时存储在受影响 ECU 内的不同故障存储器中。

因此,将给定 DiagnosticEvent 同时引用为 masterEvent 和 slaveEvent 的模型应被视为损坏的模型,[constr_1590] 进一步阐明了这一点。

同理,一个特定 DiagnosticEvent 在角色 masterEvent 或角色 slaveEvent 中被引用多于一次的模型也被视为损坏的模型。

在角色 masterEvent 或 slaveEvent 中引用的 DiagnosticEvent:

该规则应在 DEXT 完成时施加。

诊断从事件绝不应由诊断监视器直接报告。从事件只在 Dem 内部报告。这一重要方面由 [constr_1591] 涵盖。

被引用为 slaveEvent 的 DiagnosticEvent 不应由诊断监视器报告:

该规则应在 DEXT 完成时施加。

表5.35:DiagnosticMasterToSlaveEventMapping(DiagnosticMasterToSlaveEventMapping)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticMapping | | 说明 | This meta-class provides the ability to map a master diagnostic event with a slave diagnostic event such that reporting of the master event with a given value also reports the slave event with the same value Tags: atp.recommendedPackage=DiagnosticMappings | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMapping , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
masterEvent DiagnosticEvent 0..1 ref This represents the master diagnostic event.
slaveEvent DiagnosticEvent 0..1 ref This represents the slave diagnostic event.

5.3.12. 诊断事件到安全事件的映射

AUTOSAR 提供定义所谓安全事件(security event)(由元类 SecurityEventDefinition 形式化)的能力,以指示对 AUTOSAR 系统的可能入侵。

细节在 TPS Security Extract Template 规范 [22] 中描述。

元类 DiagnosticEventToSecurityEventMapping 的语义:

在技术上,该机制归结为响应安全事件的发生而报告一个诊断事件。

这种方法之所以可能,是因为存在 DiagnosticEventToSecurityEventMapping。

表5.36:DiagnosticEventToSecurityEventMapping(DiagnosticEventToSecurityEventMapping)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticMapping | | 说明 | This meta-class represents the ability to map a security event that is defined in the context of the Security Extract to a diagnostic event defined on the context of the DiagnosticExtract. Tags: atp.Status=candidate atp.recommendedPackage=DiagnosticMappings | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMapping , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
diagnosticEvent DiagnosticEvent 0..1 ref This reference identifies the applicable diagnostic event. Tags: atp.Status=candidate
securityEvent Props SecurityEventContext Props 0..1 ref This reference identifies the qualification of the applicable security event Tags: atp.Status=candidate

角色 DiagnosticEventToSecurityEventMapping.diagnosticEvent 中引用的存在性:

角色 DiagnosticEventToSecurityEventMapping.securityEventProps 中引用的存在性:

必须理解,到安全事件的映射不是指向 SecurityEventDefinition 的。该元类表示一个高层设计对象,需要更多上下文才能在具体项目中被考虑。

这一附加上下文由 SecurityEventContextProps 提供,因此后者成为角色 DiagnosticEventToSecurityEventMapping.securityEventProps 中引用的目标。

乍一看,DiagnosticEventToSecurityEventMapping 的定义与属性 SecurityEventContextProps.persistentStorage 的存在似乎造成了一定程度的冗余。但事实并非如此。

这特别意味着,SecurityEventContextProps.persistentStorage 的存在可用于指示需要持久化相应的安全事件。

相应的 DiagnosticEventToSecurityEventMapping 可以在工作流的后期创建,那时哪个安全事件应被持久化的正式信息构成工作流的重要输入。

表5.37:SecurityEventContextProps(SecurityEventContextProps)

| 包 | M2::AUTOSARTemplates::SecurityExtractTemplate | | 说明 | This meta-class specifies the SecurityEventDefinition to be mapped to an IdsmInstance and adds mapping-dependent properties of this security event valid only for this specific mapping. Tags: atp.Status=candidate | | 基类 | ARObject , Identifiable , MultilanguageReferrable , Referrable | | 聚合于 | SecurityEventContextMapping .mappedSecurityEvent |

属性 类型 多重性 种类 备注
contextData SecurityEventContext Data 0..1 aggr This aggregation represents the definition of optional context data for security events. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=contextData, contextData.variation Point.shortLabel atp.Status=candidate vh.latestBindingTime=systemDesignTime
default ReportingMode SecurityEventReporting ModeEnum 0..1 attr This attribute defines the default reporting mode for the referenced security event. Tags: atp.Status=candidate
persistent Storage Boolean 0..1 attr This attribute controls whether qualified reportings of the referenced security event shall be stored persistently by the mapped IdsmInstance or not. Tags: atp.Status=candidate
securityEvent SecurityEventDefinition 0..1 ref This reference defines the security event that is mapped and enriched by SecurityEventMappingProps with mapping dependent properties. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=securityEvent.securityEventDefinition, securityEvent.variationPoint.shortLabel atp.Status=candidate vh.latestBindingTime=systemDesignTime
sensorInstance Id PositiveInteger 0..1 attr This attribute defines the ID of the security sensor that detects the referenced security event. Tags: atp.Status=candidate

表5.38:SecurityEventContextProps(SecurityEventContextProps)

属性 类型 多重性 种类 备注
severity PositiveInteger 0..1 attr This attribute defines how critical/severe the referenced security event is. Please note that currently, the severity level meanings of specific integer values is not specified by AUTOSAR but left to the party responsible for the IDS system design (e.g. the OEM). Tags: atp.Status=candidate

表5.39:SecurityEventDefinition(SecurityEventDefinition)

| 包 | M2::AUTOSARTemplates::SecurityExtractTemplate | | 说明 | This meta-class defines a security-related event as part of the intrusion detection system. Tags: atp.Status=candidate atp.recommendedPackage=SecurityEventDefinitions | | 基类 | ARElement , ARObject , CollectableElement , Identifiable , IdsCommonElement , MultilanguageReferrable , PackageableElement , Referrable , UploadableDesignElement , UploadablePackageElement | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
eventSymbol Name SymbolProps 0..1 aggr This aggregation defines optionally an alternative Event Name for the SecurityEventDefinition in case there is a collision of shortNames. Stereotypes: atpSplitable Tags: atp.Splitkey=eventSymbolName.shortName atp.Status=candidate
id PositiveInteger 0..1 attr This attribute represents the numerical identification of the defined security event. The identification shall be unique within the scope of the IDS. Tags: atp.Status=candidate

5.4. 功能禁用的映射

功能禁用上下文中的相关映射描绘于图 5.20。

功能禁用上下文中映射建模的描述可以粗略分为以下各节:

  • 禁用源与诊断事件之间的映射在第 5.4.1 节描述。

  • 别名事件映射在第 5.4.2 节描述。

  • 功能标识符与诊断监视器之间的映射在第 5.4.3 节描述。

  • 功能标识符与 IUMPR 之间的映射在第 5.4.4 节描述。

5.4.1. 禁用源与诊断事件之间的映射

FiM 的配置需要澄清特定禁用源(建模为 DiagnosticFunctionInhibitSource)与一个或多个诊断事件(建模为 DiagnosticEvent)之间的关系。

提供该信息的最简单方式是使用 DiagnosticInhibitSourceEventMapping,它能够在 DiagnosticFunctionInhibitSource 与 DiagnosticEvent 或 DiagnosticFimEventGroup 之间创建关联。

只有在 DiagnosticInhibitSourceEventMapping 所引用的 DiagnosticEvent 已经存在时这才可能。这种存在取决于开发工作流,可能成立也可能不成立。更多细节请参见图 4.74。

表5.40:DiagnosticInhibitSourceEventMapping(DiagnosticInhibitSourceEventMapping)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticMapping::FimMapping | | 说明 | This meta-class represents the ability to map a DiagnosticFunctionInhibitSource directly to alternatively one DiagnosticEvent or one DiagnosticFimSummaryEvent. This model element shall be used if the approach via the alias events is not applicable, i.e. when diagnostic events defined by the Dem are already available at the time the Fim configuration within the diagnostic extract is created. Tags: atp.recommendedPackage=DiagnosticInhibitSourceEventMappings | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMapping , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
diagnosticEvent DiagnosticEvent 0..1 ref This represents the reference to the diagnostic event.

表5.41:DiagnosticInhibitSourceEventMapping(DiagnosticInhibitSourceEventMapping)

属性 类型 多重性 种类 备注
eventGroup DiagnosticFimEvent Group 0..1 ref This represents the reference to the event group
inhibitionSource DiagnosticFunction InhibitSource 0..1 ref This represents the reference to the inhibition source.

5.4.2. 别名事件映射

在诊断提取中为创建 FiM 配置而定义 “别名” 诊断事件:

  • DiagnosticFimAliasEventMapping:在这种情况下,“别名” 诊断事件的定义对应于单个 DiagnosticEvent;

DiagnosticFimAliasEventGroupMapping:在这种情况下,“别名” 诊断事件组的定义对应于一组单个 DiagnosticEvent。

归根结底,FiM 的建模方法始于通过元类 DiagnosticFunctionIdentifier 对功能概念本身的定义。

DiagnosticFimAliasEventMapping 存在的后果:

  • 仅存在 actualEvent:在这种情况下没有可用的 DiagnosticFimAliasEvent,可以直接使用实际 DiagnosticEvent 创建 FiM 配置。

  • 仅存在 aliasEvent:在这种情况下配置被视为不完整,只从 FiM 预配置的角度定义了预期语义。

  • actualEvent 和 aliasEvent 都存在:在这种情况下,显然配置已经历了使用 DiagnosticFimAliasEvent 的预配置步骤。但由于角色 actualEvent 中的 DiagnosticEvent 存在,诊断提取在 FiM 配置的这个方面被视为完整。

表5.42:DiagnosticFimAliasEventMapping(DiagnosticFimAliasEventMapping)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Dem::DiagnosticEvent | | 说明 | This meta-class represents the ability to model the mapping of a DiagnosticEvent to a DiagnosticAlias Event. By this means the "preliminary" modeling by way of a DiagnosticAliasEvent is further substantiated. Tags: atp.recommendedPackage=DiagnosticFimEventMappings | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMapping , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
actualEvent DiagnosticEvent 0..1 ref This represents the reference to the actual diagnostic event.
aliasEvent DiagnosticFimAlias Event 0..1 ref This represents the reference to the alias event.

DiagnosticFimAliasEventGroupMapping 存在的后果:

仅存在 actualEvent:在这种情况下没有可用的 DiagnosticFimAliasEventGroup,可以直接使用实际 DiagnosticFimEventGroup 创建 FiM 配置。

仅存在 aliasEvent:在这种情况下配置被视为不完整,只从 FiM 预配置的角度定义了预期语义。

actualEvent 和 aliasEvent 都存在:在这种情况下,显然配置已经历了使用 DiagnosticFimAliasEventGroup 的预配置步骤。但由于角色 actualEvent 中的 DiagnosticFimEventGroup 存在,诊断提取在 FiM 配置的这个方面被视为完整。

表5.43:DiagnosticFimAliasEventGroup(DiagnosticFimAliasEventGroup)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::Fim | | 说明 | This meta-class represents the ability to define an alias for a Fim summarized event. This alias can be used in early phases of the configuration process until a further refinement is possible. Tags: atp.recommendedPackage=DiagnosticFimAliasEventGroups | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticAbstractAliasEvent , DiagnosticCommonElement , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
groupedAlias Event DiagnosticFimAlias Event * ref By means of this reference the grouping of Diagnostic AliasEvents within the DiagnosticFimSummaryEvent can be specified.

表5.44:DiagnosticFimAliasEventGroupMapping(DiagnosticFimAliasEventGroupMapping)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticMapping::FimMapping | | 说明 | This meta-class represents the ability to map a DiagnosticFimEventGroup to a DiagnosticFimAliasEvent Group. By this means the "preliminary" modeling by way of a DiagnosticFimAliasEventGroup is further substantiated. Tags: atp.recommendedPackage=DiagnosticFimAliasEventGroupMappings | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMapping , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
actualEvent DiagnosticFimEvent Group 0..1 ref This represents the reference to the actual summary event.
aliasEvent DiagnosticFimAlias EventGroup 0..1 ref This represents the reference to the alias summary event.

5.4.3. 功能标识符到相应监视器的映射

除了对功能禁用本身建模的能力之外,同样重要的是能够将此禁用连接到适用的监视器。

这种关系可以通过 DiagnosticFimFunctionMapping 表达。细节勾勒于图 5.24。

DiagnosticFimFunctionMapping 的语义:

DiagnosticFimFunctionMapping 应只引用聚合 FunctionInhibitionNeeds 的 SwcServiceDependency:

该规则应在 DEXT 完成时施加。

该映射的建模与诊断提取上下文中涉及 SwcServiceDependency 的已有映射建模密切相关。

表5.45:DiagnosticFimFunctionMapping(DiagnosticFimFunctionMapping)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticMapping::ServiceMapping | | 说明 | This meta-class represents the ability to define a mapping between a function identifier (FID) and the corresponding SwcServiceDependency in the application software resp. basic software. Tags: atp.recommendedPackage=DiagnosticFimFunctionMappings | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMapping , DiagnosticSwMapping , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
mappedBsw Service Dependency BswService DependencyIdent 0..1 ref This is supposed to represent a reference to a Bsw ServiceDependency. the latter is not derived from Referrable and therefore this detour needs to be implemented to still let BswServiceDependency become the target of a reference.
mappedFlatSwc Service Dependency SwcService Dependency 0..1 ref This represents the ability to refer to an AtomicSw ComponentType that is available without the definition of how it will be embedded into the component hierarchy.
mapped Function DiagnosticFunction Identifier 0..1 ref This represents the mapped FID.

表5.46:DiagnosticFimFunctionMapping(DiagnosticFimFunctionMapping)

属性 类型 多重性 种类 备注
mappedSwc Service Dependency SwcService Dependency 0..1 iref This represents the ability to point into the component hierarchy (under possible consideration of the root SoftwareComposition). InstanceRef implemented by: SwcServiceDependency InSystemInstanceRef

表5.47:FunctionInhibitionNeeds(FunctionInhibitionNeeds)

| 包 | M2::AUTOSARTemplates::CommonStructure::ServiceNeeds | | 说明 | Specifies the abstract needs on the configuration of the Function Inhibition Manager for one Function Identifier (FID). This class currently contains no attributes. Its name can be regarded as a symbol identifying the FID from the viewpoint of the component or module which owns this class. | | 基类 | ARObject , Identifiable , MultilanguageReferrable , Referrable , ServiceNeeds | | 聚合于 | BswServiceDependency.serviceNeeds, SwcServiceDependency.serviceNeeds |

5.4.4. 诊断 IUMPR 到功能标识符的映射

DiagnosticIumprToFunctionIdentifierMapping 的语义:

表5.48:DiagnosticIumprToFunctionIdentifierMapping(DiagnosticIumprToFunctionIdentifierMapping)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticMapping | | 说明 | This meta-class represents the ability to associate a DiagnosticFunctionIdentifier with a DiagnosticIumpr. Tags: atp.recommendedPackage=DiagnosticMappings | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMapping , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
function Identifier DiagnosticFunction Identifier 0..1 ref This reference identifies the applicable Diagnostic FunctionIdentifier.
iumpr DiagnosticIumpr 0..1 ref This reference identifies the applicable DiagnosticIumpr.

DiagnosticIumprToFunctionIdentifierMapping . iumpr 的存在性:

DiagnosticIumprToFunctionIdentifierMapping . functionIdentifier 的存在性:

5.5. J1939 相关的 DiagnosticMapping

J1939 诊断上下文中的相关映射描绘于图 5.26。

功能禁用上下文中映射建模的描述可以粗略分为以下各节:

  • SPN 映射在第 5.5.1 节描述。

  • 软件组件与控制器应用之间的映射在第 5.5.2 节描述。

  • 诊断事件与 J1939 DTC 之间的映射在第 5.5.3 节描述。

5.5.1. SPN 映射

DiagnosticJ1939SpnMapping 的语义:

请注意,DiagnosticJ1939SpnMapping 的建模还意味着同一个 SPN 可以由不同的 J1939NmNode 发送。这一能力得到明确支持。

控制器应用与 SPN 的关系:

针对 J1939 方法的这一特定特征,引用 DiagnosticJ1939SpnMapping.sendingNode 的多重性被设置为 0..*。

表5.49:DiagnosticJ1939SpnMapping(DiagnosticJ1939SpnMapping)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticMapping::DiagnosticJ1939Mapping | | 说明 | This meta-class represents the ability to define a mapping between an SPN and a SystemSignal. The existence of a mapping means that neither the SPN nor the SystemSignal need to be updated if the relation between the two changes. Tags: atp.recommendedPackage=DiagnosticJ1939SpnMappings | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMapping , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
sendingNode DiagnosticJ1939Node * ref This additional reference has a supporting role in that it identifies all sending nodes of a given SPN. It is positively possible that a given SPN is sent by more than one node. Even tough the reference targets the Diagnostic J1939Node the semantics of the reference is bound to the J1939NmNode that is in turn referenced by the DiagnosticJ1939Node.
spn DiagnosticJ1939Spn 0..1 ref This reference goes to the SPN that shall be associated with a SystemSignal.
systemSignal SystemSignal 0..1 ref This reference goes to the SystemSignal that shall be associated with an SPN.

表5.50:DiagnosticJ1939Node(DiagnosticJ1939Node)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::J1939 | | 说明 | This meta-class represents the diagnostic configuration of a J1939 Nm node, which in turn represents a "virtual Ecu" on the J1939 communication bus. Tags: atp.recommendedPackage=DiagnosticJ1939Nodes | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
nmNode J1939NmNode 0..1 ref This represents the reference to the "virtual Ecu" to which the enclosing DiagnosticJ1939Node is associated.

5.5.2. 软件组件与控制器应用之间的映射

J1939 诊断建模的另一个方面是:需要在 DiagnosticJ1939Node(它正式表示一个控制器应用)与 AUTOSAR 规定 “功能” 的方式(通过元类 SwComponentPrototype)之间建立映射。

这引出了 DiagnosticJ1939SwMapping 的定义。

DiagnosticJ1939SwMapping 的目的:

请注意,该映射的基础是 CompositionSwComponentType 而非 System 的存在。因此该映射可以(这也是这种建模的主要动机)独立于到具体项目的部署而完成。

表5.51:DiagnosticJ1939SwMapping(DiagnosticJ1939SwMapping)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticMapping::DiagnosticJ1939Mapping | | 说明 | This meta-class represents the ability to map a piece of application software to a J1939DiagnosticNode. By this means the diagnostic configuration can be associated with the application software. Tags: atp.recommendedPackage=DiagnosticJ1939SwMappings | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMapping , DiagnosticSwMapping , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
node DiagnosticJ1939Node 0..1 ref This represents the mapped DiagnosticJ1939Node.
swComponent Prototype SwComponent Prototype 0..1 iref This represents the mapped SwComponentPrototype. InstanceRef implemented by: ComponentIn CompositionInstanceRef

5.5.3. DiagnosticEvent 与 J1939 DTC 之间的映射

DiagnosticEventToTroubleCodeJ1939Mapping 的语义:

在 n:1 映射的情况下,必须定义多个 DiagnosticEventToTroubleCodeJ1939Mapping 实例,它们具有相同的角色 troubleCodeJ1939 引用但不同的角色 diagnosticEvent 引用。

表5.52:DiagnosticEventToTroubleCodeJ1939Mapping(DiagnosticEventToTroubleCodeJ1939Mapping)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticMapping::DiagnosticJ1939Mapping | | 说明 | By means of this meta-class it is possible to associate a DiagnosticEvent to a DiagnosticTroubleCode J1939. Tags: atp.recommendedPackage=DiagnosticMappings | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMapping , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
diagnosticEvent DiagnosticEvent 0..1 ref Reference to a DiagnosticEvent to which a J1939 Diagnostic Trouble Code is assigned.
troubleCode J1939 DiagnosticTroubleCode J1939 0..1 ref Reference to a J1939 Diagnostic Trouble Code to which a DiagnosticEvent is assigned.

the reference DiagnosticEventToTroubleCodeJ1939Mapping . diagnosticEvent 的存在性:

the attribute DiagnosticEventToTroubleCodeJ1939Mapping . troubleCodeJ1939 的存在性:

5.6. CP 软件集群的诊断配置

在 AUTOSAR 经典平台上,所谓的 “CP 软件集群”(由元类 CpSoftwareCluster 形式化)提供了一种把 ECU 模块化分解为可独立开发和测试的组件的方法。

凭借其模块化和分散的特性,诊断提取能够支持 CP 软件集群的诊断配置。

然而,在 CP 软件集群与相应诊断提取的开发和集成方面,有些地方可以改进。这些方面在本章中描述。

CP 软件集群上下文中映射建模的描述可以粗略分为以下各节:

  • 诊断映射与 CP 软件集群的关联在第 5.6.1 节描述。

  • DEXT 元素与软件集群资源之间的映射在第 5.6.2 节描述。

  • 诊断事件与软件集群资源之间的映射在第 5.6.3 节描述。

  • 诊断数据元素与软件集群资源之间的映射在第 5.6.4 节描述。

  • 诊断例程与软件集群资源之间的映射在第 5.6.5 节描述。

  • 功能标识符与软件集群资源之间的映射在第 5.6.6 节描述。

5.6.1. 诊断映射与 CP 软件集群的关联

引用 DiagnosticMapping.providerSoftwareCluster 的语义:

为此,角色 DiagnosticMapping.providerSoftwareCluster 中的引用可用于引用以提供角色出现的 CP 软件集群。

Conversely, the reference in the role DiagnosticMapping . requesterSoftwareCluster can be used to refer to a CP Software Cluster in a requesting role. glyph[floorright] ()

0..1

5.6.2. DEXT 元素与 CP 软件集群资源之间的映射

元类 CpSoftwareClusterResource 在 TPS 系统模板 [6] 中描述。它表示内存中预留的一个位置,例如用于在 CP 软件集群之间传递信息。

通过在诊断提取的元素与 CpSoftwareClusterResource 之间创建映射,甚至可以在 CpSoftwareCluster 内的 SwComponentType 和 SwComponentPrototype 被完整规定之前,就为诊断信息的通信指定特定的 CpSoftwareClusterResource,即完整 DiagnosticMapping 的创建成为可能。

表5.53:CpSoftwareClusterResource(CpSoftwareClusterResource)

| 包 | M2::AUTOSARTemplates::SystemTemplate::SoftwareCluster | | 说明 | Represents a single resource required or provided by a CP Software Cluster. Tags: atp.recommendedPackage=Resources | | 基类 | ARObject , Identifiable , MultilanguageReferrable , Referrable | | 子类 | CpSoftwareClusterCommunicationResource, CpSoftwareClusterServiceResource | | 聚合于 | CpSoftwareClusterResourcePool.resource |

属性 类型 多重性 种类 备注
dependent Resource RoleBasedResource Dependency * aggr Link to a resource which depends on this resource to implement them.
globalResource Id PositiveInteger 0..1 attr A unique identifiers per resource used for the connection process. The identifier is required to be unique in the scope of a single machine. If software clusters are designed to be reused on multiple machines the uniqueness requirements applies for all the intended machines.
isMandatory Boolean 0..1 attr This attribute indicates, that the resource is mandatory to operate the Software Cluster. If the resource is not provided on the machine the connection process of any Software Cluster requiring this resource gets aborted.

表5.54:RoleBasedResourceDependency(RoleBasedResourceDependency)

| 包 | M2::AUTOSARTemplates::SystemTemplate::SoftwareCluster | | 说明 | This class specifies a dependency between CpSoftwareClusterResources. | | 基类 | ARObject | | 聚合于 | CpSoftwareClusterResource .dependentResource |

属性 类型 多重性 种类 备注
resource CpSoftwareCluster Resource 0..1 ref Reference to resource for which the dependency is depicted.
role Identifier 0..1 attr This is attributes characterizes the kind of dependency

5.6.3. 诊断事件与 CP 软件集群资源之间的映射

DiagnosticEvent 与 CpSoftwareClusterResource 之间的映射:

表5.55:CpSwClusterToDiagEventMapping(CpSwClusterToDiagEventMapping)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticMapping::CpSoftwareCluster | | 说明 | This meta-class represents the ability to associate a CpSoftwareClusterResource with a Diagnostic Event. This allows for indicating that the CpSoftwareClusterResource is used to convey the reporting or status query of the mapped DiagnosticEvent. Tags: atp.Status=draft atp.recommendedPackage=CpSoftwareClusterToDiagMappings | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMapping , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
cpSoftware Cluster Resource CpSoftwareCluster Resource 0..1 ref This reference identifies the mapped CpSoftwareCluster Resource. Tags: atp.Status=draft
diagnosticEvent DiagnosticEvent 0..1 ref This reference identifies the mapped DiagnosticEvent. Tags: atp.Status=draft

5.6.4. 诊断数据元素与 CP 软件集群资源之间的映射

DiagnosticDataElement 与 CpSoftwareClusterResource 之间的映射:

表5.56:CpSwClusterResourceToDiagDataElemMapping(CpSwClusterResourceToDiagDataElemMapping)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticMapping::CpSoftwareCluster | | 说明 | This meta-class represents the ability to associate a CpSoftwareClusterResource with a DiagnosticData Element. This allows for indicating that the CpSoftwareClusterResource is used to convey the Diagnostic DataElement. Tags: atp.Status=draft atp.recommendedPackage=CpSoftwareClusterToDiagMappings | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMapping , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
cpSoftware Cluster Resource CpSoftwareCluster Resource 0..1 ref This represents the affected CpSoftwareClusterResource. Tags: atp.Status=draft
diagnosticData Element DiagnosticDataElement 0..1 ref This reference represents the affected DiagnosticData Element. Tags: atp.Status=draft

5.6.5. 诊断例程与 CP 软件集群资源之间的映射

DiagnosticRoutineSubfunction 与 CpSoftwareClusterResource 之间的映射:

表5.57:CpSwClusterToDiagRoutineSubfunctionMapping(CpSwClusterToDiagRoutineSubfunctionMapping)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticMapping::CpSoftwareCluster | | 说明 | This meta-class represents the ability to associate a CpSoftwareClusterResource with a subfunction of a DiagnosticRoutine. This allows for indicating that the CpSoftwareClusterResource is used to convey the calling or result return of the mapped DiagnosticRoutine. Tags: atp.Status=draft atp.recommendedPackage=CpSoftwareClusterToDiagMappings | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMapping , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
cpSoftware Cluster Resource CpSoftwareCluster Resource 0..1 ref This reference identifies the mapped CpSoftwareCluster Resource. Tags: atp.Status=draft
routine Subfunction DiagnosticRoutine Subfunction 0..1 ref This reference identifies the mapped subfunction of a DiagnosticRoutine. Tags: atp.Status=draft

5.6.6. 诊断功能标识符与 CP 软件集群资源之间的映射

DiagnosticFunctionIdentifier 与 CpSoftwareClusterResource 之间的映射:

表5.58:CpSwClusterResourceToDiagFunctionIdMapping(CpSwClusterResourceToDiagFunctionIdMapping)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticMapping::CpSoftwareCluster | | 说明 | This meta-class represents the ability to associate a CpSoftwareClusterResource with a subfunction of a DiagnosticFunctionIdentifier. This allows for indicating that the CpSoftwareClusterResource is used to convey the execution permission associated with the mapped function identifier. Tags: atp.Status=draft atp.recommendedPackage=CpSoftwareClusterToDiagMappings | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMapping , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
cpSoftware Cluster Resource CpSoftwareCluster Resource 0..1 ref This reference identifies the mapped CpSoftwareCluster Resource. Tags: atp.Status=draft
function Identifier DiagnosticFunction Identifier 0..1 ref This reference identifies the mapped DiagnosticFunction Identifier. Tags: atp.Status=draft

A. 参考资料

本章包含本规范的一些相关参考资料。

A.1. 缩略语

The following table contains a list of abbreviations used in the scope of this document along with the spelled-out meaning of each of the abbreviations.

| Abbreviation | meaning |

| API | Application Programming Interface | | BSW | Basic Software | | BswM | Basic Software Manager | | CAN | Controller Area Network | | CSE | Codes for Scaling Units | | DCM | Diagnostics Communication Manager | | DCY | Driving Cycle | | DEM | Diagnostics Event Manager | | DID | Diagnostic Identifier | | DTC | Diagnostic Trouble Code | | DTR | Diagnostic Test Result | | DoIP | Diagnostics over IP | | ECU | Electrical Control Unit | | ECUC | ECU Configuration | | FID | Function Identifier | | FIM | Function Inhibition Manager | | GID | Group Identifier | | ID | Identifier | | IO | Input/Output | | IP | Internet Protocol | | IUMPR | In-Use Monitor Performance Ratio | | ISO | International Organization for Standardization | | LIN | Local Interconnect Network | | NRC | Negative Response Code | | OBD | On-Board Diagnostic | | ODX | Open Diagnostic Data Exchange | | OEM | Original Equipment Manufacturer | | PDU | Protocol Data Unit | | PID | Parameter Identifier | | PKI | Public-Key Infrastructure | | PTO | Power Take Off | | RA | Routing Activation | | RAM | Random Access Memory | | RID | Routine Identifier | | ROE | Response on Event | | ROM | Read-Only Memory |

| Abbreviation | meaning |

| RTE | Run-TIme Environment | | RS | Requirements Specification | | RX | Receive | | SPN | Suspect Parameter Number | | SW | Software | | SWC | Software Component | | SWCD | Software Component Description | | TID | Test Identifier | | TPS | Template Specification | | TX | Transmit | | SWS | Software Specification | | UDS | Unified Diagnostic Services | | UML | Unified Modeling Language | | VFB | Virtual Functional Bus | | VIN | Vehicle Identification Number | | WWH-OBD | World-Wide Harmonized On-Board Diagnostics | | XML | Extensible Markup Language | | XSD | XML Schema Definition |

B. 示例(Examples)

本节包含本文档所讨论的选定建模方面的示例集。

请注意,并不预期为本文档所讨论的模型元素使用的每一个方面都创建示例。

B.1. Examples of the Definition of nested Diagnostic Parameters

本节包含嵌套 DiagnosticParameter 定义的示例。其背景在第 4.2.4 节中解释。

B.1.1. 简单嵌套示例

嵌套 DiagnosticParameter 的最简单示例勾勒于图 B.1。它只包含一个嵌套层级,以及被聚合的、依次位于名为 “A” 的外围 DiagnosticParameter 开头的 DiagnosticParameterElement “X” 和 “Y”。

如图 B.1 所勾勒,嵌套的 DiagnosticParameterElement 并未覆盖外围 DiagnosticParameter 预留的整个槽。

未分配给嵌套 DiagnosticParameterElement 的空闲空间不能被其他 DiagnosticParameter 占用,它保留给外围 DiagnosticParameter “A” 的未来扩展。

图 B.1 所勾勒的 DiagnosticDataIdentifier(对 DiagnosticRoutineSubfunction 的建模看起来也类似)的简化(即精简到最低限度)建模包含在清单 B.1 中。

&lt;DIAGNOSTIC-DATA-IDENTIFIER&gt;
&lt;SHORT-NAME&gt; NestedAligned &lt;/SHORT-NAME&gt;
&lt;DATA-ELEMENTS&gt; &lt;DIAGNOSTIC-PARAMETER&gt; &lt;BIT-OFFSET&gt; 32 &lt;/BIT-OFFSET&gt; &lt;PARAMETER-SIZE&gt; 128 &lt;/PARAMETER-SIZE&gt; &lt;IDENT&gt; &lt;SHORT-NAME&gt; A &lt;/SHORT-NAME&gt; &lt;SUB-ELEMENTS&gt; &lt;DIAGNOSTIC-PARAMETER-ELEMENT&gt; &lt;SHORT-NAME&gt; X &lt;/SHORT-NAME&gt; &lt;CATEGORY&gt; LEAF &lt;/CATEGORY&gt; &lt;BIT-OFFSET&gt; 32 &lt;/BIT-OFFSET&gt; &lt;DATA-ELEMENTS&gt; &lt;DIAGNOSTIC-DATA-ELEMENT&gt; &lt;SHORT-NAME&gt; X &lt;/SHORT-NAME&gt; &lt;/DIAGNOSTIC-DATA-ELEMENT&gt; &lt;/DATA-ELEMENTS&gt; &lt;/DIAGNOSTIC-PARAMETER-ELEMENT&gt; &lt;DIAGNOSTIC-PARAMETER-ELEMENT&gt; &lt;SHORT-NAME&gt; Y &lt;/SHORT-NAME&gt; &lt;CATEGORY&gt; LEAF &lt;/CATEGORY&gt; &lt;BIT-OFFSET&gt; 64 &lt;/BIT-OFFSET&gt; &lt;DATA-ELEMENTS&gt; &lt;DIAGNOSTIC-DATA-ELEMENT&gt; &lt;SHORT-NAME&gt; Y &lt;/SHORT-NAME&gt; &lt;/DIAGNOSTIC-DATA-ELEMENT&gt; &lt;/DATA-ELEMENTS&gt; &lt;/DIAGNOSTIC-PARAMETER-ELEMENT&gt; &lt;/SUB-ELEMENTS&gt; &lt;/IDENT&gt; &lt;/DIAGNOSTIC-PARAMETER&gt; &lt;/DATA-ELEMENTS&gt; &lt;/DIAGNOSTIC-DATA-IDENTIFIER&gt;

B.1.2. 带间隙的简单嵌套示例

另一个稍复杂的示例勾勒于图 B.2。与图 B.1 所描绘的示例相反,所勾勒的两个 DiagnosticParameterElement “X” 和 “Y” 既不与外围 DiagnosticParameter 的起始位置对齐,也不彼此对齐。

在这个特定情况下,外围 DiagnosticParameter 的未来扩展可以在起始处的空闲空间、“X” 与 “Y” 之间以及直至外围 DiagnosticParameter “A” 所占槽尾部的空间中进行。

图 B.2 所勾勒的 DiagnosticDataIdentifier(对 DiagnosticRoutineSubfunction 的建模看起来也类似)的简化(即精简到最低限度)建模包含在清单 B.2 中。


32 128 A X LEAF 48 X Y LEAF 96 Y

B.1.3. 两级嵌套示例

正如图 B.3 中的示例所强调的,可以在 DiagnosticParameter 内部规定一个带间隙的结构:

  • 在起始处,即 DiagnosticParameter 的开始与第一个 DiagnosticParameterElement 之间;

  • 在 DiagnosticParameterElement 的放置之间;

  • 在尾部,即最后一个 DiagnosticParameterElement 的放置与 DiagnosticParameter 的尾部之间。

换言之,不要求子元素在其各自的上下文中一个紧接一个地放置。类似地,承载 DiagnosticParameter 的 DID 也可能有间隙:

  • 在起始处,即 DiagnosticAbstractDataIdentifier 或 DiagnosticRoutineSubfunction 的开始与第一个 DiagnosticParameter 之间;

  • 在 DiagnosticParameter 的放置之间;

  • 在尾部,即最后一个 DiagnosticParameter 的放置与 DiagnosticAbstractDataIdentifier / DiagnosticRoutineSubfunction 的尾部之间。

如图 4.2 所指示,嵌套定义通过利用以下角色实现:

  • DiagnosticParameter.ident.subElement,以及

  • DiagnosticParameterElement.subElement。

在 DiagnosticParameter 定义内部嵌套结构定义的示例见图 B.3。

该示例假定在给定 DiagnosticDataIdentifier(也可以是 DiagnosticRoutineSubfunction)的定义内部存在一个名为 “A” 的 DiagnosticParameter。

名为 “A” 的 DiagnosticParameter 定义两个名为 “X” 和 “Y” 的 subElement。“X” 又定义两个名为 “K” 和 “L” 的 subElement。相反,“Y” 有两个名为 “G” 和 “H” 的 subElement。


NestedMapping 32 128 A X STRUCTURE 48 32 K LEAF 48 K L LEAF 64 L Y STRUCTURE 96 32

&lt;SHORT-NAME&gt; G &lt;/SHORT-NAME&gt;
&lt;CATEGORY&gt; LEAF &lt;/CATEGORY&gt; &lt;BIT-OFFSET&gt; 96 &lt;/BIT-OFFSET&gt; &lt;DATA-ELEMENTS&gt; &lt;DIAGNOSTIC-DATA-ELEMENT&gt; &lt;SHORT-NAME&gt; G &lt;/SHORT-NAME&gt; &lt;/DIAGNOSTIC-DATA-ELEMENT&gt; &lt;/DATA-ELEMENTS&gt; &lt;/DIAGNOSTIC-PARAMETER-ELEMENT&gt; &lt;DIAGNOSTIC-PARAMETER-ELEMENT&gt; &lt;SHORT-NAME&gt; H &lt;/SHORT-NAME&gt; &lt;CATEGORY&gt; LEAF &lt;/CATEGORY&gt; &lt;BIT-OFFSET&gt; 104 &lt;/BIT-OFFSET&gt; &lt;DATA-ELEMENTS&gt; &lt;DIAGNOSTIC-DATA-ELEMENT&gt; &lt;SHORT-NAME&gt; H &lt;/SHORT-NAME&gt; &lt;/DIAGNOSTIC-DATA-ELEMENT&gt; &lt;/DATA-ELEMENTS&gt; &lt;/DIAGNOSTIC-PARAMETER-ELEMENT&gt; &lt;/SUB-ELEMENTS&gt; &lt;/DIAGNOSTIC-PARAMETER-ELEMENT&gt; &lt;/SUB-ELEMENTS&gt; &lt;/IDENT&gt; &lt;/DIAGNOSTIC-PARAMETER&gt; &lt;/DATA-ELEMENTS&gt; &lt;/DIAGNOSTIC-DATA-IDENTIFIER&gt;

B.1.4. 结构体数组示例

该示例(如图 B.4 所描绘)假定 DiagnosticParameter 表示一个 RGB 颜色值数组,这些值存储在一个三元素的结构中(表示 R、G 和 B 值)。

该示例还表明,可以把数组元素的大小(本例中为 32 位)定义为大于上述结构在每个数组元素中实际占用的数据空间(本例中为 24 位)。

图 B.4 所描绘的模型也在清单 B.4 中以最小方式勾勒。

&lt;DIAGNOSTIC-DATA-IDENTIFIER&gt;


DidArrayOfStruct 32 128 A X ARRAY 32 32 3 R LEAF 32 R

&lt;DIAGNOSTIC-PARAMETER-ELEMENT&gt;
&lt;SHORT-NAME&gt; G &lt;/SHORT-NAME&gt; &lt;CATEGORY&gt; LEAF &lt;/CATEGORY&gt; &lt;BIT-OFFSET&gt; 40 &lt;/BIT-OFFSET&gt; &lt;DATA-ELEMENTS&gt; &lt;DIAGNOSTIC-DATA-ELEMENT&gt; &lt;SHORT-NAME&gt; G &lt;/SHORT-NAME&gt; &lt;/DIAGNOSTIC-DATA-ELEMENT&gt; &lt;/DATA-ELEMENTS&gt; &lt;/DIAGNOSTIC-PARAMETER-ELEMENT&gt; &lt;DIAGNOSTIC-PARAMETER-ELEMENT&gt; &lt;SHORT-NAME&gt; B &lt;/SHORT-NAME&gt; &lt;CATEGORY&gt; LEAF &lt;/CATEGORY&gt; &lt;BIT-OFFSET&gt; 48 &lt;/BIT-OFFSET&gt; &lt;DATA-ELEMENTS&gt; &lt;DIAGNOSTIC-DATA-ELEMENT&gt; &lt;SHORT-NAME&gt; B &lt;/SHORT-NAME&gt; &lt;/DIAGNOSTIC-DATA-ELEMENT&gt; &lt;/DATA-ELEMENTS&gt; &lt;/DIAGNOSTIC-PARAMETER-ELEMENT&gt; &lt;/SUB-ELEMENTS&gt; &lt;/DIAGNOSTIC-PARAMETER-ELEMENT&gt; &lt;/SUB-ELEMENTS&gt; &lt;/IDENT&gt; &lt;/DIAGNOSTIC-PARAMETER&gt; &lt;/DATA-ELEMENTS&gt; &lt;/DIAGNOSTIC-DATA-IDENTIFIER&gt;

B.2. Examples of Diagnostic Service Data Mapping

本节提供映射场景的示例,这些场景针对由 DiagnosticParameter 和 DiagnosticParameterElement 定义的、或多或少先复杂的数据对象以及相应的组合 AutosarDataPrototype 定义。

其背景在第 5.2.1 节中解释。

B.2.1. 简单结构

图 B.5 给出应用 [TPS_DEXT_01179] 的简单示例情形的勾勒。

如示例所示,被映射的 DiagnosticParameter 大于所需,因此为以后扩展被映射的数据结构留出了空间,而无需更新 DiagnosticDataIdentifier 的布局。

reference to DiagnosticParameterElement in the role diagnosticParameter 的存在性:

这意味着组合 DataPrototype 的元素将不必从被引用 DiagnosticParameter 的 bitOffset 开始依次放置。明确支持间隙。

[TPS_DEXT_01180] 的后果在非对齐 DiagnosticParameterElement 简单嵌套的情况下勾勒于图 B.6。

B.2.2. 嵌套结构

更复杂的情况勾勒于图 B.7。在这种情况下,映射被配置为映射名为 “K” 和 “L” 的 “叶” 元素,还描绘了中间层级(名为 “Y” 的 DiagnosticParameterElement)上映射的样子。

请注意(如图 B.7 所描绘的勾勒所示),在外围 DiagnosticParameter 或 DiagnosticParameterElement 上下文中 DiagnosticParameterElement 的放置存在间隙的情况下,需要单独的映射。

B.2.3. 结构体数组

下一个示例(如图 B.8 所描绘)解释到组合数据对象数组的映射如何工作。

更具体地说,该映射示例对应于第 B.1.4 节(即图 B.4)中讨论的示例。

在本例中,示例中第一个数组元素(X[0])的内容已被逐元素映射(即 “R”、“G” 和 “B”),仅用于诊断目的。

也可以映射整个数组元素,如 X[1] 和 X[2] 的映射所示。

结构中一个元素的单独映射在图 B.8 中有更详细的解释。


R0ToR0 /SwComponentTypes/MySwc/ RgbArrayPort /ApplicationDataTypes/ArrayOfRgbStructType/arrayElement / ApplicationDataTypes/RgbStructType/R / DiagnosticDataElements/DidArrayOfStruct/A/X / DiagnosticDataElements/DidArrayOfStruct/A/X/R

请注意,在这个特定情况下,需要两个对 DiagnosticParameterElement 的引用才能正确标识被映射的 DiagnosticParameterElement。

1 请注意,用于标识应用软件中 DataPrototype 的 InstanceRef 有意从 PortPrototype 层级开始,以保持简单,并把示例模型的复杂度保持在本目的所需的最低程度。

第一个引用(在角色 DiagnosticServiceDataMapping.parameterElementAccess.contextElement 中)用于标识数组元素(注意 index XML 属性的出现)。

第二个引用(在角色 DiagnosticServiceDataMapping.parameterElementAccess.targetElement 中)标识结构的元素。

整个数组元素的映射勾勒于清单 B.6。

显然,在这种情况下,只需要一个对 DiagnosticParameterElement 的单一引用(在角色 DiagnosticServiceDataMapping.parameterElementAccess.targetElement 中)——包括 index XML 属性,本例中设置为 “1”。


X1toArray1 /SwComponentTypes/MySwc/ RgbArrayPort / ApplicationDataTypes/ArrayOfRgbStructType/arrayElement / DiagnosticDataElements/DidArrayOfStruct/A/X

B.3. Examples of the Definition of Mature and De-Mature Condition

以下 ARXML 片段示例说明了按照 [TPS_DEXT_01069],如何将 StructuredReq 与属性 category 的标准化值一起使用,把一个示例性成熟条件和一个去成熟条件的半形式化文本描述附加到 DiagnosticEvent。


ExampleEvent_0001 MatureCondition DIAG_EVENT_MAT_COND

This DTC is set if System Voltage is below 9 Volts

DematureCondition DIAG_EVENT_DEMAT_COND

This DTC is set if System Voltage is above 10 Volts < XFILE> Requirement_Specification http://autosar.org



ONLY-THIS-CYCLE-AND-READINESS ALWAYS 100 SWC false

B.4. Examples of the Definition of semi-formal Textual Description

以下 ARXML 片段示例说明了如何将 TraceableText 与属性 category 的标准化值一起使用,把半形式化文本描述附加到 DiagnosticTroubleCodeUds。更多信息请参见 [TPS_DEXT_01066]。


ExampleDTC_0001 My little ODX long name This DTC is a System Error DTC MyErrorText DIAG_DTC_ERROR_TEXT

Lorem ipsum dolor sit amet, consectetur adipisicing elit

/AUTOSAR/UseCase_230/ ExampleDTC_0001_Props 1 CHECK-AT-NEXT-HALT 0x000001

B.5. Examples of the Definition of Pre- and Run-Condition

以下 ARXML 片段示例说明了如何将 StructuredReq 与属性 category 的标准化值一起使用,把半形式化文本描述附加到 DiagnosticAccessPermission。更多信息请参见 [TPS_DEXT_01071]。


exampleAccessPermission precondition DIAG_ACCESS_PERM_PRE_COND

This is a textual description of a pre-condition

runcondition DIAG_ACCESS_PERM_RUN_COND

This is a textual description of a run-condition

/AUTOSAR/UseCase_230/ ExampleSession /AUTOSAR/ UseCase_230/ExampleSecurityLevel

&lt;/DIAGNOSTIC-ACCESS-PERMISSION&gt;

C. 本文档提及的类表

为完整起见,本章收录一组类表,表示本文档上下文中提及、但不直接属于描述特定元模型语义范围的元类。

表C.1:ARElement(ARElement)

| 包 | M2::AUTOSARTemplates::GenericStructure::GeneralTemplateClasses::ARPackage | | 说明 | An element that can be defined stand-alone, i.e. without being part of another element (except for packages of course). | | 基类 | ARObject , CollectableElement , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 子类 | AclObjectSet, AclOperation, AclPermission, AclRole, AliasNameSet, ApplicabilityInfoSet, Application Partition, AutosarDataType , BaseType , BlueprintMappingSet, BswEntryRelationshipSet, BswModule Description, BswModuleEntry, BuildActionManifest, CalibrationParameterValueSet, ClientIdDefinitionSet, ClientServerInterfaceToBswModuleEntryBlueprintMapping, Collection, CompuMethod, Consistency NeedsBlueprintSet, ConstantSpecification, ConstantSpecificationMappingSet, CpSoftwareCluster, Cp SoftwareClusterBinaryManifestDescriptor, CpSoftwareClusterMappingSet, CpSoftwareClusterResource Pool, CryptoEllipticCurveProps, CryptoServiceCertificate, CryptoServiceKey, CryptoServicePrimitive, CryptoServiceQueue, CryptoSignatureScheme, DataConstr, DataExchangePoint, DataTransformation Set, DataTypeMappingSet, DdsCpConfig, DiagnosticCommonElement , DiagnosticConnection, DiagnosticContributionSet, DltContext, DltEcu, Documentation, E2EProfileCompatibilityProps, Ecuc DefinitionCollection, EcucDestinationUriDefSet, EcucModuleConfigurationValues, EcucModuleDef, Ecuc ValueCollection, EndToEndProtectionSet, EthIpProps, EthTcpIpIcmpProps, EthTcpIpProps, Evaluated VariantSet, FMFeature, FMFeatureMap, FMFeatureModel, FMFeatureSelectionSet, FirewallRule, Flat Map, GeneralPurposeConnection, HwCategory, HwElement, HwType, IEEE1722TpConnection , IPSec ConfigProps, IPv6ExtHeaderFilterSet, IdsCommonElement , IdsDesign, Implementation , ImpositionTime DefinitionGroup, InterpolationRoutineMappingSet, J1939ControllerApplication, KeywordSet, LifeCycle InfoSet, LifeCycleStateDefinitionGroup, LogAndTraceMessageCollectionSet, MacSecGlobalKayProps, MacSecParticipantSet, McFunction, McGroup, ModeDeclarationGroup, ModeDeclarationMappingSet, Os TaskProxy, PhysicalDimension, PhysicalDimensionMappingSet, PortInterface , PortInterfaceMappingSet, PortPrototypeBlueprint, PostBuildVariantCriterion, PostBuildVariantCriterionValueSet, PredefinedVariant, RapidPrototypingScenario, SdgDef, SignalServiceTranslationPropsSet, SomeipSdClientEventGroup TimingConfig, SomeipSdClientServiceInstanceConfig, SomeipSdServerEventGroupTimingConfig, SomeipSdServerServiceInstanceConfig, SwAddrMethod, SwAxisType, SwComponentMapping Constraints, SwComponentType , SwRecordLayout, SwSystemconst, SwSystemconstantValueSet, Swc BswMapping, System, SystemSignal, SystemSignalGroup, TDCpSoftwareClusterMappingSet, Tcp OptionFilterSet, TimingExtension , TlsConnectionGroup, TlvDataIdDefinitionSet, TransformationProps | | 聚合于 | ARPackage.element |

表C.2:ARElement(ARElement)

| 包 | M2::AUTOSARTemplates::GenericStructure::GeneralTemplateClasses::ARPackage | | 说明 | AUTOSAR package, allowing to create top level packages to structure the contained ARElements. ARPackages are open sets. This means that in a file based description system multiple files can be used to partially describe the contents of a package. This is an extended version of MSR's SW-SYSTEM. | | 基类 | ARObject , AtpBlueprint , AtpBlueprintable , CollectableElement , Identifiable , MultilanguageReferrable Referrable | | 聚合于 | ARPackage.arPackage, AUTOSAR.arPackage |

属性 类型 多重性 种类 备注
Class ARPackage
arPackage ARPackage * aggr This represents a sub package within an ARPackage, thus allowing for an unlimited package hierarchy. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=arPackage.shortName, arPackage.variation Point.shortLabel vh.latestBindingTime=blueprintDerivationTime xml.sequenceOffset=30
element PackageableElement * aggr Elements that are part of this package Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=element.shortName, element.variation Point.shortLabel vh.latestBindingTime=systemDesignTime xml.sequenceOffset=20
referenceBase ReferenceBase * aggr This denotes the reference bases for the package. This is the basis for all relative references within the package. The base needs to be selected according to the base attribute within the references. Stereotypes: atpSplitable Tags: atp.Splitkey=referenceBase.shortLabel xml.sequenceOffset=10

表C.3:ARPackage(ARPackage)

| 包 | M2::AUTOSARTemplates::AutosarTopLevelStructure | | 说明 | Root element of an AUTOSAR description, also the root element in corresponding XML documents. Tags: xml.globalElement=true | | 基类 | ARObject |

属性 类型 多重性 种类 备注
adminData AdminData 0..1 aggr This represents the administrative data of an Autosar file. Stereotypes: atpSplitable Tags: atp.Splitkey=adminData xml.sequenceOffset=10
arPackage ARPackage * aggr This is the top level package in an AUTOSAR model. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=arPackage.shortName, arPackage.variation Point.shortLabel vh.latestBindingTime=blueprintDerivationTime xml.sequenceOffset=30
fileInfo Comment FileInfoComment 0..1 aggr This represents a possibility to provide a structured comment in an AUTOSAR file. Stereotypes: atpStructuredComment Tags: xml.roleElement=true xml.sequenceOffset=-10 xml.typeElement=false
Class AUTOSAR
introduction DocumentationBlock 0..1 aggr This represents an introduction on the Autosar file. It is intended for example to represent disclaimers and legal notes. Tags: xml.sequenceOffset=20

表C.4:AUTOSAR(AUTOSAR)

| 包 | M2::AUTOSARTemplates::SWComponentTemplate::Datatype::Datatypes | | 说明 | ApplicationDataType defines a data type from the application point of view. Especially it should be used whenever something "physical" is at stake. An ApplicationDataType represents a set of values as seen in the application model, such as measurement units. It does not consider implementation details such as bit-size, endianess, etc. It should be possible to model the application level aspects of a VFB system by using ApplicationData Types only. | | 基类 | ARElement , ARObject , AtpBlueprint , AtpBlueprintable , AtpClassifier , AtpType , AutosarDataType , CollectableElement , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 子类 | ApplicationCompositeDataType , ApplicationPrimitiveDataType | | 聚合于 | ARPackage.element |

表C.5:ApplicationDataType(ApplicationDataType)

| 包 | M2::AUTOSARTemplates::CommonStructure::Constants | | 说明 | This meta-class represents values for DataPrototypes typed by ApplicationDataTypes (this includes in particular compound primitives). For further details refer to ASAM CDF 2.0. This meta-class corresponds to some extent with SW-INSTANCE in ASAM CDF 2.0. | | 基类 | ARObject , CompositeRuleBasedValueArgument , ValueSpecification | | 聚合于 | ApplicationAssocMapElementValueSpecification.key, ApplicationAssocMapElementValueSpecification. value, ArrayValueSpecification.element, CalibrationParameterValue.applInitValue, CalibrationParameter Value.implInitValue, CompositeRuleBasedValueSpecification.compoundPrimitiveArgument, Constant Specification.valueSpec, CryptoServiceKey.developmentValue, DiagnosticEnvDataCondition.compare Value, DiagnosticEnvDataElementCondition.compareValue, FieldSenderComSpec.initValue, ISignal.init Value, ISignal.timeoutSubstitutionValue, NonqueuedReceiverComSpec.initValue, NonqueuedReceiver ComSpec.timeoutSubstitutionValue, NonqueuedSenderComSpec.initValue, NvProvideComSpec.ram BlockInitValue, NvProvideComSpec.romBlockInitValue, NvRequireComSpec.initValue, ParameterData Prototype.initValue, ParameterProvideComSpec.initValue, ParameterRequireComSpec.initValue, PersistencyDataRequiredComSpec.initValue, PersistencyKeyValuePair.initValue, PortDefinedArgument Value.value, PortPrototypeBlueprintInitValue.value, RecordValueSpecification.field, SomeipEvent Deployment.eventReceptionDefaultValue, StateManagementCompareCondition .compareValue, SwData DefProps.invalidValue, VariableDataPrototype.initValue |

属性 类型 多重性 种类 备注
category Identifier 0..1 attr Specifies to which category of ApplicationDataType this ApplicationValueSpecification can be applied (e.g. as an initial value), thus imposing constraints on the structure and semantics of the contained values, see [constr_1006] and [constr_2051].
Class ApplicationValueSpecification
swAxisCont (ordered) SwAxisCont * aggr This represents the axis values of a Compound Primitive Data Type (curve or map). The first swAxisCont describes the x-axis, the second sw AxisCont describes the y-axis, the third swAxisCont describes the z-axis. In addition to this, the axis can be denoted in swAxisIndex.
swValueCont SwValueCont 0..1 aggr This represents the values of a Compound Primitive Data Type.

表C.6:ApplicationValueSpecification(ApplicationValueSpecification)

| 包 | M2::AUTOSARTemplates::SWComponentTemplate::PortInterface | | 说明 | An argument of an operation, much like a data element, but also carries direction information and is owned by a particular ClientServerOperation. | | 基类 | ARObject , AtpFeature , AtpPrototype , AutosarDataPrototype , DataPrototype , Identifiable , Multilanguage Referrable , Referrable | | 聚合于 | AtpClassifier .atpFeature, ClientServerOperation.argument |

属性 类型 多重性 种类 备注
direction ArgumentDirection Enum 0..1 attr This attribute specifies the direction of the argument prototype.
serverArgument ImplPolicy ServerArgumentImpl PolicyEnum 0..1 attr This defines how the argument type of the servers RunnableEntity is implemented. If the attribute is not defined this has the same semantics as if the attribute is set to the value useArgumentType for primitive arguments and structures.

表C.7:ArgumentDataPrototype(ArgumentDataPrototype)

| 包 | M2::AUTOSARTemplates::SWComponentTemplate::Components | | 说明 | An atomic software component is atomic in the sense that it cannot be further decomposed and distributed across multiple ECUs. | | 基类 | ARElement , ARObject , AtpBlueprint , AtpBlueprintable , AtpClassifier , AtpType , CollectableElement , Identifiable , MultilanguageReferrable , PackageableElement , Referrable , SwComponentType | | 子类 | ApplicationSwComponentType, ComplexDeviceDriverSwComponentType, EcuAbstractionSwComponent Type, NvBlockSwComponentType, SensorActuatorSwComponentType, ServiceProxySwComponent Type, ServiceSwComponentType | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
internalBehavior SwcInternalBehavior 0..1 aggr The SwcInternalBehaviors owned by an AtomicSw ComponentType can be located in a different physical file. Therefore the aggregation is <>. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=internalBehavior.shortName, internal Behavior.variationPoint.shortLabel vh.latestBindingTime=preCompileTime
Class AtomicSwComponentType (abstract)
symbolProps SymbolProps 0..1 aggr This represents the SymbolProps for the AtomicSw ComponentType. Stereotypes: atpSplitable Tags: atp.Splitkey=symbolProps.shortName

表C.8:AtpInstanceRef(AtpInstanceRef)

| 包 | M2::AUTOSARTemplates::GenericStructure::AbstractStructure | | 说明 | An M0 instance of a classifier may be represented as a tree rooted at that instance, where under each node come the sub-trees representing the instances which act as features under that node. An instance ref specifies a navigation path from any M0 tree-instance of the base (which is a classifier) to a leaf (which is an instance of the target). | | 基类 | ARObject | | 子类 | AnyInstanceRef, ApplicationCompositeElementInPortInterfaceInstanceRef, ComponentInComposition InstanceRef, ComponentInSystemInstanceRef, DataPrototypeInPortInterfaceInstanceRef , Data PrototypeInSystemInstanceRef, InnerDataPrototypeGroupInCompositionInstanceRef, InnerPortGroupIn CompositionInstanceRef, InnerRunnableEntityGroupInCompositionInstanceRef, InstanceEventIn CompositionInstanceRef, ModeDeclarationGroupPrototypeInSystemInstanceRef, ModeGroupInAtomic SwcInstanceRef , ModeInBswModuleDescriptionInstanceRef, ModeInSwcInstanceRef, Operation ArgumentInComponentInstanceRef, OperationInAtomicSwcInstanceRef , OperationInSystemInstance Ref, PModeInSystemInstanceRef, ParameterDataPrototypeInSystemInstanceRef, ParameterInAtomicS WCTypeInstanceRef, PortGroupInSystemInstanceRef, PortInCompositionTypeInstanceRef , RModeIn AtomicSwcInstanceRef, RteEventInCompositionInstanceRef, RteEventInEcuInstanceRef, RteEventIn SystemInstanceRef, RunnableEntityInCompositionInstanceRef, SwcServiceDependencyInSystem InstanceRef, TriggerInAtomicSwcInstanceRef , TriggerInSystemInstanceRef, VariableAccessInEcu InstanceRef, VariableDataPrototypeInCompositionInstanceRef, VariableDataPrototypeInSystemInstance Ref, VariableInAtomicSWCTypeInstanceRef, VariableInAtomicSwcInstanceRef , VariableInComponent |

属性 类型 多重性 种类 备注
atpBase AtpClassifier 1 ref This is the base from which the navigaion path starts. Stereotypes: atpAbstract; atpDerived
atpContext Element (ordered) AtpPrototype * ref This is one particular step in the navigation path. Stereotypes: atpAbstract
atpTarget AtpFeature 1 ref This is the target of the instance ref. In other words it is the terminal of the navigation path. Stereotypes: atpAbstract

表C.9:AutosarDataPrototype(AutosarDataPrototype)

| 包 | M2::AUTOSARTemplates::SWComponentTemplate::Datatype::DataPrototypes | | 说明 | Base class for prototypical roles of an AutosarDataType. | | 基类 | ARObject , AtpFeature , AtpPrototype , DataPrototype , Identifiable , MultilanguageReferrable , Referrable | | 子类 | ArgumentDataPrototype, ParameterDataPrototype, VariableDataPrototype | | 聚合于 | AtpClassifier .atpFeature | | 包 | M2::AUTOSARTemplates::SWComponentTemplate::Datatype::Datatypes | | 说明 | Abstract base class for user defined AUTOSAR data types for software. | | 基类 | ARElement , ARObject , AtpClassifier , AtpType , CollectableElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 子类 | AbstractImplementationDataType , ApplicationDataType | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
type AutosarDataType 0..1 tref This represents the corresponding data type. Stereotypes: isOfType
Class AutosarDataType (abstract)
swDataDef Props SwDataDefProps 0..1 aggr The properties of this AutosarDataType. Stereotypes: atpSplitable Tags: atp.Splitkey=swDataDefProps

表C.10:AutosarDataType(AutosarDataType)

| 包 | M2::MSR::AsamHdo::BaseTypes | | 说明 | This abstract meta-class represents the ability to specify a platform dependent base type. | | 基类 | ARElement , ARObject , CollectableElement , Identifiable , MultilanguageReferrable , Packageable Element , Referrable | | 子类 | SwBaseType | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
baseType Definition BaseTypeDefinition 1 aggr This is the actual definition of the base type. Tags: xml.roleElement=false xml.roleWrapperElement=false xml.sequenceOffset=20 xml.typeElement=false xml.typeWrapperElement=false

表C.11:BaseType(BaseType)

| 包 | M2::MSR::AsamHdo::BaseTypes | | 说明 | This BaseType is defined directly (as opposite to a derived BaseType) | | 基类 | ARObject , BaseTypeDefinition | | 聚合于 | BaseType .baseTypeDefinition |

属性 类型 多重性 种类 备注
baseType Encoding BaseTypeEncoding String 0..1 attr This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. Tags: xml.sequenceOffset=90
baseTypeSize PositiveInteger 0..1 attr Describes the length of the data type specified in the container in bits. Tags: xml.sequenceOffset=70
byteOrder ByteOrderEnum 0..1 attr This attribute specifies the byte order of the base type. Tags: xml.sequenceOffset=110
Class BaseTypeDirectDefinition
memAlignment PositiveInteger 0..1 attr This attribute describes the alignment of the memory object in bits. E.g. "8" specifies, that the object in question is aligned to a byte while "32" specifies that it is aligned four byte. If the value is set to "0" the meaning shall be interpreted as "unspecified". Tags: xml.sequenceOffset=100
native Declaration NativeDeclarationString 0..1 attr This attribute describes the declaration of such a base type in the native programming language, primarily in the Programming language C. This can then be used by a code generator to include the necessary declarations into a header file. For example BaseType with shortName: "MyUnsignedInt" native Declaration: "unsigned short" Results in typedef unsigned short MyUnsignedInt; If the attribute is not defined the referring Implementation DataTypes will not be generated as a typedef by RTE. If a nativeDeclaration type is given it shall fulfill the characteristic given by basetypeEncoding and baseType Size. This is required to ensure the consistent handling and interpretation by software components, RTE, COM and MCM systems. Tags: xml.sequenceOffset=120

表C.12:BaseTypeDirectDefinition(BaseTypeDirectDefinition)

| 包 | M2::AUTOSARTemplates::BswModuleTemplate::BswOverview | | 说明 | Root element for the description of a single BSW module or BSW cluster. In case it describes a BSW module, the short name of this element equals the name of the BSW module. Tags: atp.recommendedPackage=BswModuleDescriptions | | 基类 | ARElement , ARObject , AtpBlueprint , AtpBlueprintable , AtpClassifier , AtpFeature , AtpStructureElement , CollectableElement , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element, AtpClassifier .atpFeature |

属性 类型 多重性 种类 备注
bswModule Dependency BswModuleDependency * aggr Describes the dependency to another BSW module. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=bswModuleDependency.shortName, bsw ModuleDependency.variationPoint.shortLabel vh.latestBindingTime=preCompileTime xml.sequenceOffset=20
bswModule Documentation SwComponent Documentation 0..1 aggr This adds a documentation to the BSW module. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=bswModuleDocumentation, bswModule Documentation.variationPoint.shortLabel vh.latestBindingTime=preCompileTime xml.sequenceOffset=6
Class BswModuleDescription
expectedEntry BswModuleEntry * ref Indicates an entry which is required by this module. Replacement of outgoingCallback / requiredEntry. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=expectedEntry.bswModuleEntry, expected Entry.variationPoint.shortLabel vh.latestBindingTime=preCompileTime
implemented Entry BswModuleEntry * ref Specifies an entry provided by this module which can be called by other modules. This includes "main" functions, interrupt routines, and callbacks. Replacement of providedEntry / expectedCallback. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=implementedEntry.bswModuleEntry, implementedEntry.variationPoint.shortLabel vh.latestBindingTime=preCompileTime
internalBehavior BswInternalBehavior * aggr The various BswInternalBehaviors associated with a Bsw ModuleDescription can be distributed over several physical files. Therefore the aggregation is <>. Stereotypes: atpSplitable Tags: atp.Splitkey=internalBehavior.shortName
moduleId PositiveInteger 0..1 attr Refers to the BSW Module Identifier defined by the AUTOSAR standard. For non-standardized modules, a proprietary identifier can be optionally chosen.
providedClient ServerEntry BswModuleClientServer Entry * aggr Specifies that this module provides a client server entry which can be called from another partition or core.This entry is declared locally to this context and will be connected to the requiredClientServerEntry of another or the same module via the configuration of the BSW Scheduler. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=providedClientServerEntry.shortName, providedClientServerEntry.variationPoint.shortLabel vh.latestBindingTime=preCompileTime
providedData VariableDataPrototype * aggr Specifies a data prototype provided by this module in order to be read from another partition or core.The providedData is declared locally to this context and will be connected to the requiredData of another or the same module via the configuration of the BSW Scheduler. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=providedData.shortName, provided Data.variationPoint.shortLabel vh.latestBindingTime=preCompileTime xml.sequenceOffset=55
Class BswModuleDescription
providedMode Group ModeDeclarationGroup Prototype * aggr A set of modes which is owned and provided by this module or cluster. It can be connected to the required ModeGroups of other modules or clusters via the configuration of the BswScheduler. It can also be synchronized with modes provided via ports by an associated ServiceSwComponentType, EcuAbstraction SwComponentType or ComplexDeviceDriverSw ComponentType. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=providedModeGroup.shortName, provided ModeGroup.variationPoint.shortLabel vh.latestBindingTime=preCompileTime xml.sequenceOffset=25
releasedTrigger Trigger * aggr A Trigger released by this module or cluster. It can be connected to the requiredTriggers of other modules or clusters via the configuration of the BswScheduler. It can also be synchronized with Triggers provided via ports by an associated ServiceSwComponentType, Ecu AbstractionSwComponentType or ComplexDeviceDriver SwComponentType. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=releasedTrigger.shortName, released Trigger.variationPoint.shortLabel vh.latestBindingTime=preCompileTime xml.sequenceOffset=35
requiredClient ServerEntry BswModuleClientServer Entry * aggr Specifies that this module requires a client server entry which can be implemented on another partition or core.This entry is declared locally to this context and will be connected to the providedClientServerEntry of another or the same module via the configuration of the BSW Scheduler. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=requiredClientServerEntry.shortName, requiredClientServerEntry.variationPoint.shortLabel vh.latestBindingTime=preCompileTime xml.sequenceOffset=50
requiredData VariableDataPrototype * aggr Specifies a data prototype required by this module in oder to be provided from another partition or core.The required Data is declared locally to this context and will be connected to the providedData of another or the same module via the configuration of the BswScheduler. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=requiredData.shortName, required Data.variationPoint.shortLabel vh.latestBindingTime=preCompileTime xml.sequenceOffset=60

表C.13:BswModuleDescription(BswModuleDescription)

属性 类型 多重性 种类 备注
requiredMode Group ModeDeclarationGroup Prototype * aggr Specifies that this module or cluster depends on a certain mode group. The requiredModeGroup is local to this context and will be connected to the providedModeGroup of another module or cluster via the configuration of the BswScheduler. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=requiredModeGroup.shortName, required ModeGroup.variationPoint.shortLabel vh.latestBindingTime=preCompileTime xml.sequenceOffset=30
requiredTrigger Trigger * aggr Specifies that this module or cluster reacts upon an external trigger.This requiredTrigger is declared locally to this context and will be connected to the providedTrigger of another module or cluster via the configuration of the BswScheduler. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=requiredTrigger.shortName, required Trigger.variationPoint.shortLabel vh.latestBindingTime=preCompileTime xml.sequenceOffset=40

表C.14:ClientServerOperation(ClientServerOperation)

| 包 | M2::AUTOSARTemplates::SWComponentTemplate::PortInterface | | 说明 | An operation declared within the scope of a client/server interface. | | 基类 | ARObject , AtpClassifier , AtpFeature , AtpStructureElement , Identifiable , MultilanguageReferrable , Referrable | | 聚合于 | ApplicationInterface.command, AtpClassifier .atpFeature, ClientServerInterface.operation, Diagnostic DataElementInterface.read, DiagnosticDataIdentifierInterface.read, DiagnosticDataIdentifierInterface. write, DiagnosticRoutineInterface.requestResult, DiagnosticRoutineInterface.start, DiagnosticRoutine Interface.stop, PhmRecoveryActionInterface.recovery, ServiceInterface.method | | 包 | M2::AUTOSARTemplates::SWComponentTemplate::Composition | | 说明 | A CompositionSwComponentType aggregates SwComponentPrototype s (that in turn are typed by SwComponentTypes ) as well as SwConnector s for primarily connecting SwComponentPrototype s among each others and towards the surface of the CompositionSwComponentType . By this means, a hierarchical structures of software-components can be created. | | 基类 | Tags: atp.recommendedPackage=SwComponentTypes ARElement , ARObject , AtpBlueprint , AtpBlueprintable , AtpClassifier , AtpType , CollectableElement , Identifiable , MultilanguageReferrable , PackageableElement , Referrable , SwComponentType | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
argument (ordered) ArgumentDataPrototype * aggr An argument of this ClientServerOperation Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=argument.shortName, argument.variation Point.shortLabel vh.latestBindingTime=blueprintDerivationTime
diagArgIntegrity Boolean 0..1 attr This attribute shall only be used in the implementation of diagnostic routines to support the case where input and output arguments are allocated in a shared buffer and might unintentionally overwrite input arguments by tentative write operations to output arguments. This situation can happen during sliced execution or while output parameters are arrays (call by reference). The value true means that the ClientServerOperation is aware of the usage of a shared buffer and takes precautions to avoid unintentional overwrite of input arguments. If the attribute does not exist or is set to false the Client ServerOperation does not have to consider the usage of a shared buffer.
possibleError ApplicationError * ref Possible errors that may by raised by the referring operation.
Class CompositionSwComponentType
component SwComponent Prototype * aggr The instantiated components that are part of this composition. The aggregation of SwComponentPrototype is subject to variability with the purpose to support the conditional existence of a SwComponentPrototype . Please be aware: if the conditional existence of SwComponentPrototype s is resolved post-build, the deselected SwComponentPrototype s are still contained in the ECUs build but the instances are inactive in that they are not scheduled by the RTE. The aggregation is marked as atpSplitable in order to allow the addition of service components to the ECU extract during the ECU integration. The use case for having 0 components owned by the CompositionSwComponentType could be to deliver an empty CompositionSwComponentType to e.g. a supplier for filling the internal structure. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=component.shortName, component.variation
connector SwConnector * aggr SwConnector s have the principal ability to establish a connection among PortPrototype s. They can have many roles in the context of a CompositionSwComponentType . Details are refined by subclasses. The aggregation of SwConnector s is subject to variability with the purpose to support variant data flow. The aggregation is marked as atpSplitable in order to allow the extension of the ECU extract with AssemblySwConnector s between ApplicationSwComponentType s and ServiceSwComponentType s during the ECU integration. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=connector.shortName, connector.variation Point.shortLabel vh.latestBindingTime=postBuild
constantValue Mapping ConstantSpecification MappingSet * ref Reference to the ConstantSpecificationMapping to be applied for initValues of PPortComSpec s and RPortComSpec . Stereotypes: atpSplitable Tags: atp.Splitkey=constantValueMapping
Class CompositionSwComponentType
dataType Mapping DataTypeMappingSet * ref Reference to the DataTypeMappingSet to be applied for the used ApplicationDataType s in PortInterface s. Background: when developing subsystems it may happen that ApplicationDataType s are used on the surface of CompositionSwComponentType s. In this case it would be reasonable to be able to also provide the intended mapping to the ImplementationDataType s. However, this mapping shall be informal and not technically binding for the implementors mainly because the RTE generator is not concerned about the CompositionSwComponentType s. Rationale: if the mapping of ApplicationDataType s on the delegated and inner PortPrototype matches then the mapping to ImplementationDataType s is not impacting compatibility. Stereotypes: atpSplitable Tags: atp.Splitkey=dataTypeMapping
instantiation RTEEventProps InstantiationRTEEvent Props * aggr This allows to define instantiation specific properties for RTE Events, in particular for instance specific scheduling. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=instantiationRTEEventProps.shortLabel, instantiationRTEEventProps.variationPoint.shortLabel vh.latestBindingTime=codeGenerationTime
physical Dimension Mapping PhysicalDimension MappingSet 0..1 ref This reference identifies the PhysicalDimensionMappingSet that is applicable in the context of the enclosing CompositionSwComponentType . The PhysicalDimensionMapping s contained in the PhysicalDimensionMappingSet shall be taken into account for the assessment of the compatibility of PhysicalDimension s in the context of creation of a PortInterfaceMapping in the scope of the CompositionSwComponentType .

表C.15:CompositionSwComponentType(CompositionSwComponentType)

| 包 | M2::MSR::AsamHdo::ComputationMethod | | 说明 | This meta-class represents the ability to express the relationship between a physical value and the mathematical representation. Note that this is still independent of the technical implementation in data types. It only specifies the formula how the internal value corresponds to its physical pendant. Tags: atp.recommendedPackage=CompuMethods | | 基类 | ARElement , ARObject , AtpBlueprint , AtpBlueprintable , CollectableElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

表C.16:CompuMethod(CompuMethod)

属性 类型 多重性 种类 备注
compuInternal ToPhys Compu 0..1 aggr This specifies the computation from internal values to physical values. Stereotypes: atpSplitable Tags: atp.Splitkey=compuInternalToPhys xml.sequenceOffset=80
compuPhysTo Internal Compu 0..1 aggr This represents the computation from physical values to the internal values. Stereotypes: atpSplitable Tags: atp.Splitkey=compuPhysToInternal xml.sequenceOffset=90
displayFormat DisplayFormatString 0..1 attr This property specifies, how the physical value shall be displayed e.g. in documents or measurement and calibration tools. Tags: xml.sequenceOffset=20
unit Unit 0..1 ref This is the physical unit of the Physical values for which the CompuMethod applies. Tags: xml.sequenceOffset=30

表C.17:CpSoftwareCluster(CpSoftwareCluster)

| 包 | M2::AUTOSARTemplates::SystemTemplate::SoftwareCluster | | 说明 | This meta class provides the ability to define a CP Software Cluster. Each CP Software Cluster can be integrated and build individually. It defines the sub-set of hierarchical tree(s) of Software Components belonging to this CP Software Cluster. Resources required or provided by this CP Software Cluster are given in the according mappings. Tags: atp.recommendedPackage=CpSoftwareClusters | | 基类 | ARElement , ARObject , CollectableElement , Identifiable , MultilanguageReferrable , Packageable Element , Referrable | | 聚合于 | ARPackage.element | | 包 | M2::AUTOSARTemplates::SystemTemplate::SecureCommunication | | 说明 | This meta-class represents the ability to model a cryptographic certificate. Tags: atp.recommendedPackage=CryptoServiceCertificates | | 基类 | ARElement , ARObject , CollectableElement , Identifiable , MultilanguageReferrable , Packageable Element , Referrable , UploadableDesignElement , UploadablePackageElement | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
softwareCluster Id PositiveInteger 0..1 attr This attribute represents the value of the id of the corresponding CP software cluster.
swComponent Assignment SwComponent PrototypeAssignment * aggr This is the collection of SwComponentPrototype Assignments Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=swComponentAssignment, swComponent Assignment.variationPoint.shortLabel vh.latestBindingTime=postBuild
swComposition CompositionSw ComponentType * ref Software Components in the context of a CompositionSw ComponentType belonging to this CP Software Cluster. This reference can be used to describe the belonging SWCs when the CP Software Cluster is described out of the context of a System, e.g. reusable CP Software Cluster. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=swComposition.compositionSwComponent Type, swComposition.variationPoint.shortLabel vh.latestBindingTime=systemDesignTime
Class CryptoServiceCertificate
algorithmFamily CryptoCertificate AlgorithmFamilyEnum 0..1 attr This attribute represents a description of the family of crypto algorithm used to generate public key and signature of the cryptographic certificate.
format CryptoCertificateFormat Enum 0..1 attr This attribute can be used to provide information about the format used to create the certificate
maximum Length PositiveInteger 0..1 attr This attribute represents the ability to define the maximum length of the certificate in bytes.
nextHigher Certificate CryptoService Certificate 0..1 ref The reference identifies the next higher certificate in the certificate chain.
serverName Identification String 0..1 attr Server Name Indication (SNI) is needed if the IP address hosts multiple servers (on the same port), each of them using a different certificate. If the client sends the SNI to the Server in the client hello, the server looks the SNI up in its certificate list and uses the certificate identified by the SNI.

表C.18:CryptoServiceCertificate(CryptoServiceCertificate)

| 包 | M2::MSR::AsamHdo::Constraints::GlobalConstraints | | 说明 | This meta-class represents the ability to specify constraints on data. Tags: atp.recommendedPackage=DataConstrs | | 基类 | ARElement , ARObject , AtpBlueprint , AtpBlueprintable , CollectableElement , Identifiable , Multilanguage Referrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
dataConstrRule DataConstrRule * aggr This is one particular rule within the data constraints. Tags: xml.roleElement=true xml.roleWrapperElement=true xml.sequenceOffset=30 xml.typeElement=false xml.typeWrapperElement=false

表C.19:DataConstr(DataConstr)

| 包 | M2::AUTOSARTemplates::SWComponentTemplate::PortInterface | | 说明 | The purpose of this meta-class is to act as an abstract base class for subclasses that share the semantics of being concerned about data (as opposed to e.g. operations). | | 基类 | ARElement , ARObject , AtpBlueprint , AtpBlueprintable , AtpClassifier , AtpType , CollectableElement , Identifiable , MultilanguageReferrable , PackageableElement , PortInterface , Referrable | | 子类 | NvDataInterface, ParameterInterface, SenderReceiverInterface | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
Class DataInterface (abstract)

表C.20:DataInterface(DataInterface)

| 包 | M2::AUTOSARTemplates::SWComponentTemplate::Datatype::DataPrototypes | | 说明 | Base class for prototypical roles of any data type. | | 基类 | ARObject , AtpFeature , AtpPrototype , Identifiable , MultilanguageReferrable , Referrable | | 子类 | ApplicationCompositeElementDataPrototype , AutosarDataPrototype | | 聚合于 | AtpClassifier .atpFeature |

属性 类型 多重性 种类 备注
swDataDef Props SwDataDefProps 0..1 aggr This property allows to specify data definition properties which apply on data prototype level. Stereotypes: atpSplitable Tags: atp.Splitkey=swDataDefProps

表C.21:DataPrototype(DataPrototype)

| 包 | M2::AUTOSARTemplates::CommonStructure::ServiceNeeds | | 说明 | Specifies the abstract needs on the configuration of the Diagnostic Event Manager for one diagnostic event. Its shortName can be regarded as a symbol identifying the diagnostic event from the viewpoint of the component or module which owns this element. In case the diagnostic event specifies a production error, the shortName shall be the name of the production error. | | 基类 | ARObject , DiagnosticCapabilityElement , Identifiable , MultilanguageReferrable , Referrable , Service Needs | | 聚合于 | BswServiceDependency.serviceNeeds, SwcServiceDependency.serviceNeeds |

属性 类型 多重性 种类 备注
deferringFid FunctionInhibitionNeeds * ref This reference contains the link to a function identifier within the FiM which is used by the monitor before delivering a result.
diagEvent Debounce Algorithm DiagEventDebounce Algorithm 0..1 aggr Specifies the abstract need on the Debounce Algorithm applied by the Diagnostic Event Manager.
inhibitingFid FunctionInhibitionNeeds 0..1 ref This represents the primary Function Inhibition Identifier used for inhibition of the diagnostic monitor. The FID might either inhibit the monitoring of a symptom or the reporting of detected faults.
inhibiting SecondaryFid FunctionInhibitionNeeds * ref This represents the secondary Function Inhibition Identifier used for inhibition of the diagnostic monitor. Any of the FID inhibitions leads to an inhibition of the monitoring of a symptom or the reporting of detected faults.
Class DiagnosticEventNeeds
prestored Freezeframe StoredInNvm Boolean 0..1 attr If the Event uses a prestored freeze-frame (using the operations PrestoreFreezeFrame and ClearPrestored FreezeFrame of the service interface DiagnosticMonitor) this attribute indicates if the Event requires the data to be stored in non-volatile memory. TRUE = Dem shall store the prestored data in non-volatile memory, FALSE = Data can be lost at shutdown (not stored in Nvm).
usesMonitor Data Boolean 0..1 attr This attribute defines whether additional monitor data shall be added to the reporting of events.

表C.22:DiagnosticEventNeeds(DiagnosticEventNeeds)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::DiagnosticMapping | | 说明 | This meta-class acts a mapping element to select diagnostic service instances that are used in the secure coding procedure. Besides, there are already defined diagnostic capabilities they furthermore have a additional semantics that is used during the secure coding process. In particular, this class references write data by identifier instances that mandatory require a secure coding and this class references a diagnostic routine control that is used to provide the signature and to persist the data in non-volatile memory. Tags: atp.recommendedPackage=DiagnosticMappings | | 基类 | ARElement , ARObject , CollectableElement , DiagnosticCommonElement , DiagnosticMapping , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
dataIdentifier DiagnosticWriteDataBy Identifier * ref Refer to write data by identifier instances that have the semantics to be a secure coding DID.
validation DiagnosticStartRoutine 0..1 ref Refer to a routine control that is used to authenticate and persist the secure coding data.

表C.23:DiagnosticSecureCodingMapping(DiagnosticSecureCodingMapping)

| 包 | M2::AUTOSARTemplates::SystemTemplate::Fibex::FibexCore::CoreTopology | | 说明 | ECUInstances are used to define the ECUs used in the topology. The type of the ECU is defined by a reference to an ECU specified with the ECU resource description. Tags: atp.recommendedPackage=EcuInstances | | 基类 | ARObject , CollectableElement , FibexElement , Identifiable , MultilanguageReferrable , Packageable Element , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
associatedCom IPduGroup ISignalIPduGroup * ref With this reference it is possible to identify which ISignal IPduGroups are applicable for which Communication Connector/ ECU. Only top level ISignalIPduGroups shall be referenced by an EcuInstance. If an ISignalIPduGroup contains other ISignalIPduGroups than these contained ISignalIPdu Groups shall not be referenced by the EcuInstance. Contained ISignalIPduGroups are associated to an Ecu Instance via the top level ISignalIPduGroup.
Class EcuInstance
associated Consumed Provided ServiceInstance Group ConsumedProvided ServiceInstanceGroup * ref With this reference it is possible to identify which ConsumedProvidedServiceInstanceGroups are applicable for which ECUInstance. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=associatedConsumedProvidedService InstanceGroup.consumedProvidedServiceInstanceGroup, associatedConsumedProvidedServiceInstance Group.variationPoint.shortLabel vh.latestBindingTime=postBuild
associatedPdur IPduGroup PdurIPduGroup * ref With this reference it is possible to identify which PduR IPdu Groups are applicable for which Communication Connector/ ECU.
channel Synchronous Wakeup Boolean 0..1 attr If this parameter is available and set to true, then all available channels will be woken up as soon as at least one channel wakeup occurs. If PNCs are configured, then all PNCs will be requested upon a channel wakeup.
clientIdRange ClientIdRange 0..1 aggr Restriction of the Client Identifier for this Ecu to an allowed range of numerical values. The Client Identifier of the transaction handle is generated by the client RTE for inter-Ecu Client/Server communication.
com Configuration GwTimeBase TimeValue 0..1 attr The period between successive calls to Com_Main FunctionRouteSignals of the AUTOSAR COM module in seconds.
com ConfigurationRx TimeBase TimeValue 0..1 attr The period between successive calls to Com_Main FunctionRx of the AUTOSAR COM module in seconds.
com ConfigurationTx TimeBase TimeValue 0..1 attr The period between successive calls to Com_Main FunctionTx of the AUTOSAR COM module in seconds.
comEnable MDTForCyclic Transmission Boolean 0..1 attr Enables for the Com module of this EcuInstance the minimum delay time monitoring for cyclic and repeated transmissions (TransmissionModeTiming has cyclic Timing assigned or eventControlledTiming with numberOf Repetitions > 0).
commController Communication Controller * aggr CommunicationControllers of the ECU. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=commController.shortName, comm Controller.variationPoint.shortLabel vh.latestBindingTime=postBuild
connector Communication Connector * aggr All channels controlled by a single controller. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=connector.shortName, connector.variation Point.shortLabel vh.latestBindingTime=postBuild
dltConfig DltConfig 0..1 aggr Describes the Dlt configuration on this EcuInstance.
doIpConfig DoIpConfig 0..1 aggr DoIp configuration on this EcuInstance. Tags: atp.Status=draft
ecuTaskProxy OsTaskProxy * ref Reference to OsTaskProxies assigned to the Ecu Instance. Stereotypes: atpSplitable Tags: atp.Splitkey=ecuTaskProxy

表C.24:EcuInstance(EcuInstance)

属性 类型 多重性 种类 备注
ethSwitchPort Group Derivation Boolean 0..1 attr Defines whether the derivation of SwitchPortGroups based on VLAN and/or CouplingPort.pncMapping shall be performed for this EcuInstance. If not defined the derivation shall not be done.
firewallRule StateDependentFirewall * ref Firewall rules defined in the context of an EcuInstance. Tags: atp.Status=candidate
partition EcuPartition * aggr Optional definition of Partitions within an Ecu.
pncNmRequest Boolean 0..1 attr Defines if this EcuInstance shall request Nm on all its PhysicalChannels which have Nm variant set to FULL each time a PNC is requested.
pncPrepare SleepTimer TimeValue 0..1 attr Time in seconds the PNC state machine shall wait in PNC_PREPARE_SLEEP.
pnc Synchronous Wakeup Boolean 0..1 attr If this parameter is available and set to true then all available PNCs will be woken up as soon as a channel wakeup occurs. This is ensured by adding all PNCs to all channel wakeup sources during upstream mapping.
pnResetTime TimeValue 0..1 attr Specifies the runtime of the reset timer in seconds. This reset time is valid for the reset of PN requests in the EIRA and in the ERA.
sleepMode Supported Boolean 0..1 attr Specifies whether the ECU instance may be put to a "low power mode" • true: sleep mode is supported • false: sleep mode is not supported Note: This flag may only be set to "true" if the feature is supported by both hardware and basic software.
tcpIpIcmpProps EthTcpIpIcmpProps 0..1 ref EcuInstance specific ICMP (Internet Control Message Protocol) attributes
tcpIpProps EthTcpIpProps 0..1 ref EcuInstance specific TcpIp Stack attributes.
v2xSupported V2xSupportEnum 0..1 attr This attribute is used to control the existence of the V2X stack on the given EcuInstance.
wakeUpOver BusSupported Boolean 0..1 attr Driver support for wakeup over Bus.

表C.25:EthernetPhysicalChannel(EthernetPhysicalChannel)

| 包 | M2::AUTOSARTemplates::SystemTemplate::Fibex::Fibex4Ethernet::EthernetTopology | | 说明 | The EthernetPhysicalChannel represents a VLAN or an untagged channel. An untagged channel is modeled as an EthernetPhysicalChannel without an aggregated VLAN. | | 基类 | ARObject , Identifiable , MultilanguageReferrable , PhysicalChannel , Referrable | | 聚合于 | CommunicationCluster .physicalChannel | | 包 | M2::AUTOSARTemplates::SystemTemplate::Fibex::FibexCore::CoreCommunication | | 说明 | Signal of the Interaction Layer. The RTE supports a "signal fan-out" where the same System Signal is sent in different SignalIPdus to multiple receivers. To support the RTE "signal fan-out" each SignalIPdu contains ISignals. If the same System Signal is to be mapped into several SignalIPdus there is one ISignal needed for each ISignalToIPduMapping. ISignals describe the Interface between the Precompile configured RTE and the potentially Postbuild configured Com Stack (see ECUC Parameter Mapping). In case of the SystemSignalGroup an ISignal shall be created for each SystemSignal contained in the SystemSignalGroup. | | 基类 | ARElement , ARObject , CollectableElement , FibexElement , Identifiable , MultilanguageReferrable , PackageableElement , Referrable , UploadableDesignElement , UploadablePackageElement | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
network Endpoint NetworkEndpoint * aggr Collection of NetworkEndpoints that are used in the VLan. Stereotypes: atpSplitable Tags: atp.Splitkey=networkEndpoint.shortName
soAdConfig SoAdConfig 0..1 aggr SoAd Configuration for one specific Physical Channel. Stereotypes: atpSplitable Tags: atp.Splitkey=soAdConfig
vlan VlanConfig 0..1 aggr VLAN Configuration.
Class ISignal
data Transformation DataTransformation 0..1 ref Optional reference to a DataTransformation which represents the transformer chain that is used to transform the data that shall be placed inside this ISignal. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=dataTransformation.dataTransformation, dataTransformation.variationPoint.shortLabel vh.latestBindingTime=codeGenerationTime
dataTypePolicy DataTypePolicyEnum 0..1 attr With the aggregation of SwDataDefProps an ISignal specifies how it is represented on the network. This representation follows a particular policy. Note that this causes some redundancy which is intended and can be used to support flexible development methodology as well as subsequent integrity checks. If the policy "networkRepresentationFromComSpec" is chosen the network representation from the ComSpec that is aggregated by the PortPrototype shall be used. If the "override" policy is chosen the requirements specified in the PortInterface and in the ComSpec are not fulfilled by the networkRepresentationProps. In case the System Description doesn't use a complete Software Component Description (VFB View) the "legacy" policy can be chosen.
initValue ValueSpecification 0..1 aggr Optional definition of a ISignal's initValue in case the System Description doesn't use a complete Software Component Description (VFB View). This supports the inclusion of legacy system signals. This value can be used to configure the Signal's "Init Value". If a full DataMapping exist for the SystemSignal this information may be available from a configured Sender ComSpec and ReceiverComSpec. In this case the initvalues in SenderComSpec and/or ReceiverComSpec override this optional value specification. Further restrictions apply from the RTE specification.
iSignalProps ISignalProps 0..1 aggr Additional optional ISignal properties that may be stored in different files. Stereotypes: atpSplitable Tags: atp.Splitkey=iSignalProps
iSignalType ISignalTypeEnum 0..1 attr This attribute defines whether this iSignal is an array that results in a UINT8_N / UINT8_DYN ComSignalType in the COM configuration or a primitive type.
Class ISignal
length UnlimitedInteger 0..1 attr Size of the signal in bits. The size needs to be derived from the mapped VariableDataPrototype according to the mapping of primitive DataTypes to BaseTypes as used in the RTE. Indicates maximum size for dynamic length signals. The ISignal length of zero bits is allowed.
network Representation Props SwDataDefProps 0..1 aggr Specification of the actual network representation. The usage of SwDataDefProps for this purpose is restricted to the attributes compuMethod and baseType. The optional baseType attributes "memAllignment" and "byteOrder" shall not be used. The attribute "dataTypePolicy" in the SystemTemplate element defines whether this network representation shall be ignored and the information shall be taken over from the network representation of the ComSpec. If "override" is chosen by the system integrator the network representation can violate against the requirements defined in the PortInterface and in the network representation of the ComSpec. In case that the System Description doesn't use a complete Software Component Description (VFB View) this element is used to configure "ComSignalDataInvalid Value" and the Data Semantics. Stereotypes: atpSplitable Tags: atp.Splitkey=networkRepresentationProps
systemSignal SystemSignal 0..1 ref Reference to the System Signal that is supposed to be transmitted in the ISignal.
timeout Substitution Value ValueSpecification 0..1 aggr Defines and enables the ComTimeoutSubstituition for this ISignal.
transformation ISignalProps TransformationISignal Props * aggr A transformer chain consists of an ordered list of transformers. The ISignal specific configuration properties for each transformer are defined in the TransformationISignalProps class. The transformer configuration properties that are common for all ISignals are described in the TransformationTechnology class. Stereotypes: atpSplitable Tags: atp.Splitkey=transformationISignalProps

表C.26:ISignal(ISignal)

| 包 | M2::AUTOSARTemplates::SystemTemplate::Fibex::FibexCore::CoreCommunication | | 说明 | The AUTOSAR COM Layer is able to start and to stop sending and receiving configurable groups of I-Pdus during runtime. An ISignalIPduGroup contains either ISignalIPdus or ISignalIPduGroups. Tags: atp.recommendedPackage=ISignaliPduGroup | | 基类 | ARObject , CollectableElement , FibexElement , Identifiable , MultilanguageReferrable , Packageable Element , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
communication Direction Communication DirectionType 0..1 attr This attribute determines in which direction IPdus that are contained in this IPduGroup will be transmitted (communication direction can be either In or Out).
Class ISignalIPduGroup
communication Mode String 0..1 attr This attribute defines the use-case for this ISignalIPdu Group (e.g. diagnostic, debugging etc.). For example, in a diagnostic mode all IPdus - which are not involved in diagnostic - are disabled. The use cases are not limited to a fixed enumeration and can be specified as a string.
contained ISignalIPdu Group ISignalIPduGroup * ref An I-Pdu group can be included in other I-Pdu groups. Contained I-Pdu groups shall not be referenced by the EcuInstance.
iSignalIPdu ISignalIPdu * ref Reference to a set of Signal I-Pdus, which are contained in the ISignal I-Pdu Group. atpVariation: The content of a ISignal I-Pdu group can vary (->vehicle modes). Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=iSignalIPdu.iSignalIPdu, iSignal IPdu.variationPoint.shortLabel vh.latestBindingTime=postBuild
nmPdu NmPdu * ref Reference to a set of NmPdus with NmUserData, which are contained in the ISignalIPduGroup. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=nmPdu.nmPdu, nmPdu.variationPoint.short Label vh.latestBindingTime=postBuild

表C.27:ISignalIPduGroup(ISignalIPduGroup)

| 包 | M2::AUTOSARTemplates::SWComponentTemplate::RPTScenario | | 说明 | This meta-class represents the caption. This allows having some meta-classes optionally identifiable. | | 基类 | ARObject , AtpClassifier , AtpFeature , AtpStructureElement , Identifiable , MultilanguageReferrable Referrable | | 子类 | BswServiceDependencyIdent, DiagnosticParameterIdent, ExternalTriggeringPointIdent, ModeAccess PointIdent | | 聚合于 | AtpClassifier .atpFeature |

表C.28:IdentCaption(IdentCaption)

| 包 | M2::AUTOSARTemplates::GenericStructure::GeneralTemplateClasses::Identifiable | | 说明 | Instances of this class can be referred to by their identifier (within the namespace borders). In addition to this, Identifiables are objects which contribute significantly to the overall structure of an AUTOSAR description. In particular, Identifiables might contain Identifiables. | | 基类 | ARObject , MultilanguageReferrable , Referrable | | 子类 | ARPackage, AbstractDoIpLogicAddressProps , AbstractEvent , AbstractImplementationDataTypeElement , AbstractSecurityEventFilter , AbstractSecurityIdsmInstanceFilter , AbstractServiceInstance , AppOsTask ProxyToEcuTaskProxyMapping, ApplicationEndpoint, ApplicationError, ApplicationPartitionToEcuPartition Mapping, AppliedStandard, AsynchronousServerCallResultPoint, AtpBlueprint , AtpBlueprintable , Atp Classifier , AtpFeature , AutosarOperationArgumentInstance, AutosarVariableInstance, BinaryManifest AddressableObject , BinaryManifestItemDefinition, BinaryManifestResource , BinaryManifestResource Definition, BlockState, BswInternalTriggeringPoint, BswModuleDependency, BuildActionEntity , Build ActionEnvironment, CanTpAddress, CanTpChannel, CanTpNode, Chapter, ClassContentConditional, ClientIdDefinition, ClientServerOperation, Code, CollectableElement , ComManagementMapping, Comm ConnectorPort , CommunicationConnector , CommunicationController , Compiler, ConsistencyNeeds, ConsumedEventGroup, CouplingElementAbstractDetails , CouplingPort, CouplingPortAbstractShaper , CouplingPortStructuralElement , CpSoftwareClusterResource , CpSoftwareClusterResourceToApplication PartitionMapping, CpSoftwareClusterToApplicationPartitionMapping, CpSoftwareClusterToEcuInstance Mapping, CpSoftwareClusterToResourceMapping, CryptoServiceMapping , DataPrototypeGroup, Data Transformation, DdsCpDomain, DdsCpPartition, DdsCpQosProfile, DdsCpTopic, DependencyOnArtifact, DiagEventDebounceAlgorithm , DiagnosticAuthTransmitCertificateEvaluation, DiagnosticConnected Indicator, DiagnosticDataElement, DiagnosticDebounceAlgorithmProps, DiagnosticFunctionInhibit Source, DiagnosticParameterElement, DiagnosticRoutineSubfunction , DltApplication, DltArgument, Dlt LogChannel, DltMessage, DoIpInterface, DoIpLogicAddress, DoIpRoutingActivation, ECUMapping, EOC ExecutableEntityRefAbstract , EcuPartition, EcucContainerValue, EcucDefinitionElement , Ecuc DestinationUriDef, EcucEnumerationLiteralDef, EcucQuery, EcucValidationCondition, EndToEnd Protection, EthernetWakeupSleepOnDatalineConfig, EventHandler, ExclusiveArea, ExecutableEntity , ExecutionTime , FMAttributeDef, FMFeatureMapAssertion, FMFeatureMapCondition, FMFeatureMap Element, FMFeatureRelation, FMFeatureRestriction, FMFeatureSelection, FlatInstanceDescriptor, FlexrayArTpNode, FlexrayTpConnectionControl, FlexrayTpNode, FlexrayTpPduPool, FrameTriggering , GeneralParameter, GlobalTimeGateway, GlobalTimeMaster , GlobalTimeSlave , HeapUsage , HwAttribute Def, HwAttributeLiteralDef, HwPin, HwPinGroup, IEEE1722TpAcfBus , IEEE1722TpAcfBusPart , IPSec Rule, IPv6ExtHeaderFilterList, ISignalToIPduMapping, ISignalTriggering, IdentCaption , ImpositionTime, InternalTriggeringPoint, J1939SharedAddressCluster, J1939TpNode, Keyword, LifeCycleState, Lin ScheduleTable, LinTpNode, Linker, MacMulticastGroup, MacSecKayParticipant, McDataInstance, MemorySection, ModeDeclaration, ModeDeclarationMapping, ModeSwitchPoint, NetworkEndpoint, Nm Cluster , NmEcu, NmNode , NvBlockDescriptor, PackageableElement , ParameterAccess, PduActivation RoutingGroup, PduToFrameMapping, PduTriggering, PerInstanceMemory, PhysicalChannel , Port ElementToCommunicationResourceMapping, PortGroup, PortInterfaceMapping , PossibleErrorReaction, ResourceConsumption, RootSwCompositionPrototype, RptComponent, RptContainer, RptExecutable Entity, RptExecutableEntityEvent, RptExecutionContext, RptProfile, RptServicePoint, RteEventIn CompositionSeparation, RteEventInCompositionToOsTaskProxyMapping, RteEventInSystemSeparation, RteEventInSystemToOsTaskProxyMapping, RunnableEntityGroup, SdgAttribute , SdgClass, Secure CommunicationAuthenticationProps, SecureCommunicationFreshnessProps, SecurityEventContext Props, ServerCallPoint , ServiceNeeds , SignalServiceTranslationElementProps, SignalServiceTranslation EventProps, SignalServiceTranslationProps, SocketAddress, SomeipTpChannel, SpecElement Reference , StackUsage , StaticSocketConnection, StructuredReq, SwGenericAxisParamType, SwService Arg, SwcServiceDependency, SwcToApplicationPartitionMapping, SwcToEcuMapping, SwcToImpl Mapping, SwitchAsynchronousTrafficShaperGroupEntry, SwitchFlowMeteringEntry, SwitchStreamFilter ActionDestPortModification, SwitchStreamFilterEntry, SwitchStreamFilterRule, SwitchStreamGateEntry, SwitchStreamIdentification, SystemMapping, SystemSignalGroupToCommunicationResourceMapping, SystemSignalToCommunicationResourceMapping, TDCpSoftwareClusterMapping, TDCpSoftware ClusterResourceMapping, TcpOptionFilterList, TimingClock , TimingClockSyncAccuracy, Timing Condition, TimingConstraint , TimingDescription , TimingExtensionResource, TimingModeInstance, Tls CryptoCipherSuite, TlsCryptoCipherSuiteProps, Topic1, TpAddress, TraceableTable, TraceableText, TracedFailure , TransformationProps , TransformationTechnology, Trigger, VariableAccess, VariationPoint Proxy, ViewMap, VlanConfig, WaitPoint |

属性 类型 多重性 种类 备注
Class Identifiable (abstract)
adminData AdminData 0..1 aggr This represents the administrative data for the identifiable object. Stereotypes: atpSplitable Tags: atp.Splitkey=adminData xml.sequenceOffset=-40
Class Identifiable (abstract)
annotation Annotation * aggr Possibility to provide additional notes while defining a model element (e.g. the ECU Configuration Parameter Values). These are not intended as documentation but are mere design notes. Tags: xml.sequenceOffset=-25
category CategoryString 0..1 attr The category is a keyword that specializes the semantics of the Identifiable. It affects the expected existence of attributes and the applicability of constraints. Tags: xml.sequenceOffset=-50
desc MultiLanguageOverview Paragraph 0..1 aggr This represents a general but brief (one paragraph) description what the object in question is about. It is only one paragraph! Desc is intended to be collected into overview tables. This property helps a human reader to identify the object in question. More elaborate documentation, (in particular how the object is built or used) should go to "introduction". Tags: xml.sequenceOffset=-60
introduction DocumentationBlock 0..1 aggr This represents more information about how the object in question is built or is used. Therefore it is a DocumentationBlock. Tags: xml.sequenceOffset=-30
uuid String 0..1 attr The purpose of this attribute is to provide a globally unique identifier for an instance of a meta-class. The values of this attribute should be globally unique strings prefixed by the type of identifier. For example, to include a DCE UUID as defined by The Open Group, the UUID would be preceded by "DCE:". The values of this attribute may be used to support merging of different AUTOSAR models. The form of the UUID (Universally Unique Identifier) is taken from a standard defined by the Open Group (was Open Software Foundation). This standard is widely used, including by Microsoft for COM (GUIDs) and by many companies for DCE, which is based on CORBA. The method for generating these 128-bit IDs is published in the standard and the effectiveness and uniqueness of the IDs is not in practice disputed. If the id namespace is omitted, DCE is assumed. An example is "DCE:2fac1234-31f8-11b4-a222-08002b34c003". The uuid attribute has no semantic meaning for an AUTOSAR model and there is no requirement for AUTOSAR tools to manage the timestamp. Tags: xml.attribute=true

表C.29:Identifiable(Identifiable)

| 包 | M2::AUTOSARTemplates::CommonStructure::InternalBehavior | | 说明 | Common base class (abstract) for the internal behavior of both software components and basic software modules/clusters. | | 基类 | ARObject , AtpClassifier , AtpFeature , AtpStructureElement , Identifiable , MultilanguageReferrable Referrable | | 子类 | BswInternalBehavior, SwcInternalBehavior | | 聚合于 | AtpClassifier .atpFeature |

属性 类型 多重性 种类 备注
Class InternalBehavior (abstract)
constant Memory ParameterData Prototype * aggr Describes a read only memory object containing characteristic value(s) implemented by this Internal Behavior. The shortName of ParameterDataPrototype has to be equal to the 'C' identifier of the described constant. The characteristic value(s) might be shared between Sw ComponentPrototypes of the same SwComponentType. The aggregation of constantMemory is subject to variability with the purpose to support variability in the software component or module implementations. Typically different algorithms in the implementation are requiring different number of memory objects. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=constantMemory.shortName, constant Memory.variationPoint.shortLabel vh.latestBindingTime=preCompileTime
constantValue Mapping ConstantSpecification MappingSet * ref Reference to the ConstantSpecificationMapping to be applied for the particular InternalBehavior Stereotypes: atpSplitable Tags: atp.Splitkey=constantValueMapping
dataType Mapping DataTypeMappingSet * ref Reference to the DataTypeMapping to be applied for the particular InternalBehavior Stereotypes: atpSplitable Tags: atp.Splitkey=dataTypeMapping
exclusiveArea ExclusiveArea * aggr This specifies an ExclusiveArea for this InternalBehavior. The exclusiveArea is local to the component resp. module. The aggregation of ExclusiveAreas is subject to variability. Note: the number of ExclusiveAreas might vary due to the conditional existence of RunnableEntities or BswModuleEntities. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=exclusiveArea.shortName, exclusive Area.variationPoint.shortLabel
exclusiveArea NestingOrder ExclusiveAreaNesting Order * aggr This represents the set of ExclusiveAreaNestingOrder owned by the InternalBehavior. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=exclusiveAreaNestingOrder.shortName, exclusiveAreaNestingOrder.variationPoint.shortLabel vh.latestBindingTime=preCompileTime
Class InternalBehavior (abstract)
staticMemory VariableDataPrototype * aggr Describes a read and writeable static memory object representing measurerment variables implemented by this software component. The term "static" is used in the meaning of "non-temporary" and does not necessarily specify a linker encapsulation. This kind of memory is only supported if supportsMultipleInstantiation is FALSE. The shortName of the VariableDataPrototype has to be equal with the 'C' identifier of the described variable. The aggregation of staticMemory is subject to variability with the purpose to support variability in the software component's implementations. Typically different algorithms in the implementation are requiring different number of memory objects. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=staticMemory.shortName, static Memory.variationPoint.shortLabel vh.latestBindingTime=preCompileTime

表C.30:InternalBehavior(InternalBehavior)

| 包 | M2::AUTOSARTemplates::SystemTemplate::Fibex::Fibex4Can::CanTopology | | 说明 | J1939 specific cluster attributes. Tags: atp.recommendedPackage=CommunicationClusters | | 基类 | ARElement , ARObject , AbstractCanCluster , CollectableElement , CommunicationCluster , FibexElement , Identifiable , MultilanguageReferrable , PackageableElement , Referrable , UploadableDesignElement , UploadablePackageElement | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
networkId PositiveInteger 0..1 attr This represents the network ID for the J1939 cluster.
re- quest2Support Boolean 0..1 attr Enables support for the Request2 PGN (RQST2).
usesAddress Arbitration Boolean 0..1 attr Defines whether the nodes attached to this channel use an initial address claim, and whether they react to contending address claims of other nodes. True: The initial address claim is sent, and the node reacts to address claims of other nodes. False: The node only sends an address claim upon request, and does not care for contending address claims.

表C.31:J1939Cluster(J1939Cluster)

| 包 | M2::AUTOSARTemplates::SystemTemplate::Fibex::FibexCore::CoreCommunication | | 说明 | Represents the IPdus handled by J1939Dcm. Tags: atp.recommendedPackage=Pdus | | 基类 | ARElement , ARObject , CollectableElement , FibexElement , IPdu , Identifiable , MultilanguageReferrable , PackageableElement , Pdu , Referrable , UploadableDesignElement , UploadablePackageElement | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
Class J1939DcmIPdu
diagnostic MessageType PositiveInteger 0..1 attr This attribute is used to identify the actual DMx message, e.g 1 means DM01, etc.

表C.32:J1939DcmIPdu(J1939DcmIPdu)

| 包 | M2::AUTOSARTemplates::SystemTemplate::NetworkManagement | | 说明 | J1939 specific NM Node attributes. | | 基类 | ARObject , Identifiable , MultilanguageReferrable , NmNode , Referrable | | 聚合于 | NmCluster .nmNode |

属性 类型 多重性 种类 备注
address Configuration Capability J1939NmAddress ConfigurationCapability Enum 0..1 attr Defines the Address Configuration Capability of the J1939NmNode (corresponding to an SAE J1939 Controller Application, CA).
nodeName J1939NodeName 0..1 aggr NodeName configuration

表C.33:J1939NmNode(J1939NmNode)

| 包 | M2::AUTOSARTemplates::CommonStructure::ModeDeclaration | | 说明 | Declaration of one Mode. The name and semantics of a specific mode is not defined in the meta-model. | | 基类 | ARObject , AtpClassifier , AtpFeature , AtpStructureElement , Identifiable , MultilanguageReferrable , Referrable | | 聚合于 | AtpClassifier .atpFeature, ModeDeclarationGroup.modeDeclaration |

属性 类型 多重性 种类 备注
value PositiveInteger 0..1 attr The RTE shall take the value of this attribute for generating the source code representation of this Mode Declaration.

表C.34:ModeDeclaration(ModeDeclaration)

| 包 | M2::AUTOSARTemplates::CommonStructure::ModeDeclaration | | 说明 | A collection of Mode Declarations. Also, the initial mode is explicitly identified. Tags: atp.recommendedPackage=ModeDeclarationGroups | | 基类 | ARElement , ARObject , AtpBlueprint , AtpBlueprintable , AtpClassifier , AtpType , CollectableElement , Identifiable , MultilanguageReferrable , PackageableElement , Referrable , UploadableDesignElement , UploadablePackageElement | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
initialMode ModeDeclaration 0..1 ref The initial mode of the ModeDeclarationGroup. This mode is active before any mode switches occurred.
Class ModeDeclarationGroup
mode Declaration ModeDeclaration * aggr The ModeDeclarations collected in this ModeDeclaration Group. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=modeDeclaration.shortName, mode Declaration.variationPoint.shortLabel vh.latestBindingTime=blueprintDerivationTime
modeManager ErrorBehavior ModeErrorBehavior 0..1 aggr This represents the ability to define the error behavior expected by the mode manager in case of errors on the mode user side (e.g. terminated mode user).
modeTransition ModeTransition * aggr This represents the avaliable ModeTransitions of the ModeDeclarationGroup
modeUserError Behavior ModeErrorBehavior 0..1 aggr This represents the definition of the error behavior expected by the mode user in case of errors on the mode manager side (e.g. terminated mode manager).
onTransition Value PositiveInteger 0..1 attr The value of this attribute shall be taken into account by the RTE generator for programmatically representing a value used for the transition between two statuses.

表C.35:ModeDeclarationGroupPrototype(ModeDeclarationGroupPrototype)

| 包 | M2::AUTOSARTemplates::CommonStructure::ModeDeclaration | | 说明 | The ModeDeclarationGroupPrototype specifies a set of Modes (ModeDeclarationGroup) which is provided or required in the given context. | | 基类 | ARObject , AtpFeature , AtpPrototype , Identifiable , MultilanguageReferrable , Referrable | | 聚合于 | AtpClassifier .atpFeature, BswModuleDescription.providedModeGroup, BswModuleDescription.required ModeGroup, FirewallStateSwitchInterface.firewallStateMachine, FunctionGroupSet.functionGroup, Mode SwitchInterface.modeGroup, Process.processStateMachine, StateManagementStateNotification.state Machine |

属性 类型 多重性 种类 备注
swCalibration Access SwCalibrationAccess Enum 0..1 attr This allows for specifying whether or not the enclosing ModeDeclarationGroupPrototype can be measured at run-time.
type ModeDeclarationGroup 0..1 tref The "collection of ModeDeclarations" ( = ModeDeclaration Group) supported by a component Stereotypes: isOfType

表C.36:ModeInBswModuleDescriptionInstanceRef(ModeInBswModuleDescriptionInstanceRef)

| 包 | M2::AUTOSARTemplates::BswModuleTemplate::BswOverview::InstanceRefs | | 说明 | | | 基类 | ARObject , AtpInstanceRef | | 聚合于 | BswEvent .disabledInMode, BswModeSwitchEvent.mode, DiagnosticEnvBswModeElement.mode | | 包 | M2::AUTOSARTemplates::GenericStructure::GeneralTemplateClasses::PrimitiveTypes | | 说明 | This is an identifier as used in xml, e.g. xml-names. Typical usages are, for example, the names of type emitters, protocols, or profiles. For details see NMTOKEN definition on the W3C website (https://www.w3.org/TR/xml/#NT-Nmtoken). Note: Although NameToken supports a wide range of characters, the actually allowed patterns for a certain attribute typed by NameToken may be further restricted by the specification of that attribute. Tags: xml.xsd.customType=NMTOKEN-STRING xml.xsd.type=NMTOKEN |

属性 类型 多重性 种类 备注
base BswModuleDescription 0..1 ref Stereotypes: atpDerived Tags: xml.sequenceOffset=10
contextMode Declaration Group ModeDeclarationGroup Prototype 0..1 ref Tags: xml.sequenceOffset=20
targetMode ModeDeclaration 0..1 ref Tags: xml.sequenceOffset=30
Primitive NameToken

表C.37:NameToken(NameToken)

| 包 | M2::AUTOSARTemplates::SWComponentTemplate::PortInterface | | 说明 | A non volatile data interface declares a number of VariableDataPrototypes to be exchanged between non volatile block components and atomic software components. Tags: atp.recommendedPackage=PortInterfaces | | 基类 | ARElement , ARObject , AtpBlueprint , AtpBlueprintable , AtpClassifier , AtpType , CollectableElement , DataInterface , Identifiable , MultilanguageReferrable , PackageableElement , PortInterface , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
nvData VariableDataPrototype * aggr The VariableDataPrototype of this nv data interface.

表C.38:NvDataInterface(NvDataInterface)

| 包 | M2::AUTOSARTemplates::CommonStructure::ServiceNeeds | | 说明 | Specifies the abstract needs of a component or module on the configuration of OBD Services in relation to a particular on-board monitoring test supported by this component or module. (OBD Service 06). | | 基类 | ARObject , DiagnosticCapabilityElement , Identifiable , MultilanguageReferrable , Referrable , Service Needs | | 聚合于 | BswServiceDependency.serviceNeeds, SwcServiceDependency.serviceNeeds |

属性 类型 多重性 种类 备注
applicationData Type ApplicationDataType 0..1 ref reference to an ApplicationDataType that describes the scaling of the data reported by the software-component to the Dem.
eventNeeds DiagnosticEventNeeds 0..1 ref This reference identifies the corresponding diagnostic event.
unitAndScaling Id PositiveInteger 0..1 attr Unit and scaling ID according to ISO 15031-5.
updateKind DiagnosticMonitor UpdateKindEnum 0..1 attr This attribute indicates the settings for the acceptance of updates to the Dem.

表C.39:ObdMonitorServiceNeeds(ObdMonitorServiceNeeds)

| 包 | M2::AUTOSARTemplates::SWComponentTemplate::Components | | 说明 | Component port providing a certain port interface. | | 基类 | ARObject , AbstractProvidedPortPrototype , AtpBlueprintable , AtpFeature , AtpPrototype , Identifiable , MultilanguageReferrable , PortPrototype , Referrable | | 聚合于 | AtpClassifier .atpFeature, SwComponentType .port |

属性 类型 多重性 种类 备注
Class PPortPrototype
provided Interface PortInterface 0..1 tref The interface that this port provides. Stereotypes: isOfType

表C.40:PhysicalChannel(PhysicalChannel)

| 包 | M2::AUTOSARTemplates::SystemTemplate::Fibex::FibexCore::CoreTopology | | 说明 | A physical channel is the transmission medium that is used to send and receive information between communicating ECUs. Each CommunicationCluster has at least one physical channel. Bus systems like CAN and LIN only have exactly one PhysicalChannel. A FlexRay cluster may have more than one PhysicalChannels that may be used in parallel for redundant communication. An ECU is part of a cluster if it contains at least one controller that is connected to at least one channel of the cluster.# | | 基类 | ARObject , Identifiable , MultilanguageReferrable , Referrable | | 子类 | AbstractCanPhysicalChannel , EthernetPhysicalChannel, FlexrayPhysicalChannel, LinPhysicalChannel, UserDefinedPhysicalChannel | | 聚合于 | CommunicationCluster .physicalChannel |

属性 类型 多重性 种类 备注
comm Connector Communication Connector * ref Reference to the ECUInstance via a Communication Connector to which the channel is connected. atpVariation: Variable assignment of Physical Channels to different CommunicationConnectors is expressed with this variation. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=commConnector.communicationConnector, commConnector.variationPoint.shortLabel
frameTriggering FrameTriggering * aggr One frame triggering is defined for exactly one channel. Channels may have assigned an arbitrary number of frame triggerings. atpVariation: If signals/PDUs/frames are variable, the corresponding triggerings shall be variable, too. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=frameTriggering.shortName, frame Triggering.variationPoint.shortLabel vh.latestBindingTime=postBuild
iSignal Triggering ISignalTriggering * aggr One ISignalTriggering is defined for exactly one channel. Channels may have assigned an arbitrary number of ISignaltriggerings. atpVariation: If signals/PDUs/frames are variable, the corresponding triggerings shall be variable, too. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=iSignalTriggering.shortName, iSignal Triggering.variationPoint.shortLabel vh.latestBindingTime=postBuild
Class PhysicalChannel (abstract)
managed Physical Channel PhysicalChannel * ref Reference between a channel with role managing channel and a channel with role managed channel.
pduTriggering PduTriggering * aggr One PduTriggering is defined for exactly one channel. Channels may have assigned an arbitrary number of I-Pdu triggerings. atpVariation: If signals/PDUs/frames are variable, the corresponding triggerings shall be variable, too. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=pduTriggering.shortName, pdu Triggering.variationPoint.shortLabel vh.latestBindingTime=postBuild

表C.41:PhysicalChannel(PhysicalChannel)

| 包 | M2::AUTOSARTemplates::SWComponentTemplate::PortInterface | | 说明 | Abstract base class for an interface that is either provided or required by a port of a software component. | | 基类 | ARElement , ARObject , AtpBlueprint , AtpBlueprintable , AtpClassifier , AtpType , CollectableElement , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 子类 | ClientServerInterface, DataInterface , ModeSwitchInterface, TriggerInterface | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
isService Boolean 0..1 attr This flag is set if the PortInterface is to be used for communication between an • ApplicationSwComponentType or • ServiceProxySwComponentType or • SensorActuatorSwComponentType or • ComplexDeviceDriverSwComponentType • ServiceSwComponentType • EcuAbstractionSwComponentType and a ServiceSwComponentType (namely an AUTOSAR Service) located on the same ECU. Otherwise the flag is not set. Stereotypes: atpVariation Tags: vh.latestBindingTime=blueprintDerivationTime
serviceKind ServiceProviderEnum 0..1 attr This attribute provides further details about the nature of the applied service.

表C.42:PortInterface(PortInterface)

| 包 | M2::AUTOSARTemplates::SWComponentTemplate::Components | | 说明 | Base class for the ports of an AUTOSAR software component. The aggregation of PortPrototypes is subject to variability with the purpose to support the conditional existence of ports. | | 基类 | ARObject , AtpBlueprintable , AtpFeature , AtpPrototype , Identifiable , MultilanguageReferrable , Referrable | | 子类 | AbstractProvidedPortPrototype , AbstractRequiredPortPrototype |

表C.43:PortPrototype(PortPrototype)

| 聚合于 | AtpClassifier .atpFeature, SwComponentType .port |

属性 类型 多重性 种类 备注
clientServer Annotation ClientServerAnnotation * aggr Annotation of this PortPrototype with respect to client/ server communication.
delegatedPort Annotation DelegatedPort Annotation 0..1 aggr Annotations on this delegated port.
ioHwAbstraction Server Annotation IoHwAbstractionServer Annotation * aggr Annotations on this IO Hardware Abstraction port.
modePort Annotation ModePortAnnotation * aggr Annotations on this mode port.
nvDataPort Annotation NvDataPortAnnotation * aggr Annotations on this non voilatile data port.
parameterPort Annotation ParameterPort Annotation * aggr Annotations on this parameter port.
senderReceiver Annotation SenderReceiver Annotation * aggr Collection of annotations of this ports sender/receiver communication.
triggerPort Annotation TriggerPortAnnotation * aggr Annotations on this trigger port.

| Primitive | Ref |

| Package | M2::AUTOSARTemplates::GenericStructure::GeneralTemplateClasses::PrimitiveTypes | | Note | This primitive denotes a name based reference. For detailed syntax see the xsd.pattern. • first slash (relative or absolute reference) [optional] • Identifier [required] • a sequence of slashes and Identifiers [optional] This primitive is used by the meta-model tools to create the references. Tags: xml.xsd.customType=REF xml.xsd.pattern=/?[a-zA-Z][a-zA-Z0-9_]{0,127}(/[a-zA-Z][a-zA-Z0-9_]{0,127})* xml.xsd.type=string | | Attribute | Type | | base | Identifier | | blueprintValue | String | | index | PositiveInteger |

表C.44:Referrable(Referrable)

| 包 | M2::AUTOSARTemplates::GenericStructure::GeneralTemplateClasses::Identifiable | | 说明 | Instances of this class can be referred to by their identifier (while adhering to namespace borders). | | 基类 | ARObject | | 子类 | AtpDefinition , BswDistinguishedPartition, BswModuleCallPoint , BswModuleClientServerEntry, Bsw VariableAccess, CouplingPortTrafficClassAssignment, DiagnosticEnvModeElement , EthernetPriority Regeneration, ExclusiveAreaNestingOrder, HwDescriptionEntity , ImplementationProps , LinSlaveConfig Ident, ModeTransition, MultilanguageReferrable , PncMappingIdent, SingleLanguageReferrable , SoConI PduIdentifier, SocketConnectionBundle, TimeSyncServerConfiguration, TpConnectionIdent |

属性 类型 多重性 种类 备注
shortName Identifier 1 attr This specifies an identifying shortName for the object. It needs to be unique within its context and is intended for humans but even more for technical reference. Stereotypes: atpIdentityContributor Tags: xml.enforceMinMultiplicity=true xml.sequenceOffset=-100
shortName Fragment ShortNameFragment * aggr This specifies how the Referrable.shortName is composed of several shortNameFragments. Tags: xml.sequenceOffset=-90

表C.45:Sdg(Sdg)

| 包 | M2::MSR::AsamHdo::SpecialData | | 说明 | Sdg (SpecialDataGroup) is a generic model which can be used to keep arbitrary information which is not explicitly modeled in the meta-model. Sdg can have various contents as defined by sdgContentsType. Special Data should only be used moderately since all elements should be defined in the meta-model. Thereby SDG should be considered as a temporary solution when no explicit model is available. If an sdg Caption is available, it is possible to establish a reference to the sdg structure. | | 基类 | ARObject | | 聚合于 | AdminData.sdg, BuildActionEnvironment.sdg, BuildActionInvocator.sdg, BuildActionIoElement.sdg, File InfoComment.sdg, RptHook.sdg, SdgContents.sdg, VariationPoint.sdg | | 包 | M2::AUTOSARTemplates::SWComponentTemplate::PortInterface | | 说明 | A sender/receiver interface declares a number of data elements to be sent and received. Tags: atp.recommendedPackage=PortInterfaces | | 基类 | ARElement , ARObject , AtpBlueprint , AtpBlueprintable , AtpClassifier , AtpType , CollectableElement , DataInterface , Identifiable , MultilanguageReferrable , PackageableElement , PortInterface , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
gid NameToken 1 attr This attributes specifies an identifier. Gid comes from the SGML/XML-Term "Generic Identifier" which is the element name in XML. The role of this attribute is the same as the name of an XML - element. Tags: xml.attribute=true
sdgCaption SdgCaption 0..1 aggr This aggregation allows to assign the properties of Identifiable to the sdg. By this, a shortName etc. can be assigned to the Sdg. Stereotypes: atpIdentityContributor Tags: xml.sequenceOffset=20
sdgContents Type SdgContents 0..1 aggr This is the content of the Sdg. Tags: xml.roleElement=false xml.roleWrapperElement=false xml.sequenceOffset=30 xml.typeElement=false xml.typeWrapperElement=false
Class SenderReceiverInterface
dataElement VariableDataPrototype * aggr The data elements of this SenderReceiverInterface.
invalidation Policy InvalidationPolicy * aggr InvalidationPolicy for a particular dataElement
metaDataItem Set MetaDataItemSet * aggr This aggregation defines fixed sets of meta-data items associated with dataElements of the enclosing Sender ReceiverInterface

表C.46:ServiceNeeds(ServiceNeeds)

| 包 | M2::AUTOSARTemplates::CommonStructure::ServiceNeeds | | 说明 | This expresses the abstract needs that a Software Component or Basic Software Module has on the configuration of an AUTOSAR Service to which it will be connected. "Abstract needs" means that the model abstracts from the Configuration Parameters of the underlying Basic Software. | | 基类 | ARObject , Identifiable , MultilanguageReferrable , Referrable | | 子类 | BswMgrNeeds, ComMgrUserNeeds, CryptoKeyManagementNeeds, CryptoServiceJobNeeds, Crypto ServiceNeeds, DiagnosticCapabilityElement , DltUserNeeds, DoIpServiceNeeds , EcuStateMgrUser Needs, ErrorTracerNeeds, FunctionInhibitionAvailabilityNeeds, FunctionInhibitionNeeds, Global SupervisionNeeds, HardwareTestNeeds, IdsMgrCustomTimestampNeeds, IdsMgrNeeds, IndicatorStatus Needs, J1939DcmDm19Support, J1939RmIncomingRequestServiceNeeds, J1939RmOutgoingRequest ServiceNeeds, NvBlockNeeds, SecureOnBoardCommunicationNeeds, SupervisedEntityCheckpoint Needs, SupervisedEntityNeeds, SyncTimeBaseMgrUserNeeds, V2xDataManagerNeeds, V2xFacUser Needs, V2xMUserNeeds, VendorSpecificServiceNeeds | | 聚合于 | BswServiceDependency.serviceNeeds, SwcServiceDependency.serviceNeeds |

表C.47:SwBaseType(SwBaseType)

| 包 | M2::MSR::AsamHdo::BaseTypes | | 说明 | This meta-class represents a base type used within ECU software. Tags: atp.recommendedPackage=BaseTypes | | 基类 | ARElement , ARObject , AtpBlueprint , AtpBlueprintable , BaseType , CollectableElement , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 聚合于 | ARPackage.element |

表C.48:SwComponentPrototype(SwComponentPrototype)

| 包 | M2::AUTOSARTemplates::SWComponentTemplate::Composition | | 说明 | Role of a software component within a composition. | | 基类 | ARObject , AtpFeature , AtpPrototype , Identifiable , MultilanguageReferrable , Referrable | | 聚合于 | AtpClassifier .atpFeature, CompositionSwComponentType.component |

属性 类型 多重性 种类 备注
type SwComponentType 0..1 tref Type of the instance. Stereotypes: isOfType

表C.49:SwComponentType(SwComponentType)

| 包 | M2::AUTOSARTemplates::SWComponentTemplate::Components | | 说明 | Base class for AUTOSAR software components. | | 基类 | ARElement , ARObject , AtpBlueprint , AtpBlueprintable , AtpClassifier , AtpType , CollectableElement , Identifiable , MultilanguageReferrable , PackageableElement , Referrable | | 子类 | AtomicSwComponentType , CompositionSwComponentType, ParameterSwComponentType | | 聚合于 | ARPackage.element | | 包 | M2::AUTOSARTemplates::SystemTemplate | | 说明 | The top level element of the System Description. The System description defines five major elements: Topology, Software, Communication, Mapping and Mapping Constraints. The System element directly aggregates the elements describing the Software, Mapping and Mapping Constraints; it contains a reference to an ASAM FIBEX description specifying Communication and Topology. | | 基类 | ARElement , ARObject , AtpClassifier , AtpFeature , AtpStructureElement , CollectableElement , Identifiable , MultilanguageReferrable , PackageableElement , Referrable , UploadableDesignElement , UploadablePackageElement ARPackage.element, AtpClassifier .atpFeature |

属性 类型 多重性 种类 备注
consistency Needs ConsistencyNeeds * aggr This represents the collection of ConsistencyNeeds owned by the enclosing SwComponentType. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=consistencyNeeds.shortName, consistency Needs.variationPoint.shortLabel vh.latestBindingTime=preCompileTime
port PortPrototype * aggr The PortPrototypes through which this SwComponent Type can communicate. The aggregation of PortPrototype is subject to variability with the purpose to support the conditional existence of PortPrototypes. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=port.shortName, port.variationPoint.short Label vh.latestBindingTime=preCompileTime
portGroup PortGroup * aggr A port group being part of this component. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=portGroup.shortName, portGroup.variation Point.shortLabel vh.latestBindingTime=preCompileTime
swcMapping Constraint SwComponentMapping Constraints * ref Reference to constraints that are valid for this Sw ComponentType.
swComponent Documentation SwComponent Documentation 0..1 aggr This adds a documentation to the SwComponentType. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=swComponentDocumentation, sw ComponentDocumentation.variationPoint.shortLabel vh.latestBindingTime=preCompileTime xml.sequenceOffset=-10
unitGroup UnitGroup * ref This allows for the specification of which UnitGroups are relevant in the context of referencing SwComponentType.
Class System
Tags: atp.recommendedPackage=Systems
clientId DefinitionSet ClientIdDefinitionSet * ref Set of Client Identifiers that are used for inter-ECU client-server communication in the System.
containerIPdu HeaderByte Order ByteOrderEnum 0..1 attr Defines the byteOrder of the header in ContainerIPdus.
ecuExtract Version RevisionLabelString 0..1 attr Version number of the Ecu Extract.
fibexElement FibexElement * ref Reference to ASAM FIBEX elements specifying Communication and Topology. All Fibex Elements used within a System Description shall be referenced from the System Element. atpVariation: In order to describe a product-line, all Fibex Elements can be optional. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=fibexElement.fibexElement, fibex Element.variationPoint.shortLabel vh.latestBindingTime=postBuild
interpolation Routine MappingSet InterpolationRoutine MappingSet * ref This reference identifies the InterpolationRoutineMapping Sets that are relevant in the context of the enclosing System.
j1939Shared AddressCluster J1939SharedAddress Cluster * aggr Collection of J1939Clusters that share a common address space for the routing of messages. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=j1939SharedAddressCluster.shortName, j1939SharedAddressCluster.variationPoint.shortLabel vh.latestBindingTime=postBuild
mapping SystemMapping * aggr Aggregation of all mapping aspects (mapping of SW components to ECUs, mapping of data elements to signals, and mapping constraints). In order to support OEM / Tier 1 interaction and shared development for one common System this aggregation is atpSplitable and atpVariation. The content of System Mapping can be provided by several parties using different names for the SystemMapping. This element is not required when the System description is used for a network-only use-case. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=mapping.shortName, mapping.variation Point.shortLabel

表C.50:System(System)

属性 类型 多重性 种类 备注
pncVector Length PositiveInteger 0..1 attr Length of the partial networking request release information vector (in bytes).
pncVectorOffset PositiveInteger 0..1 attr Absolute offset (with respect to the NM-PDU) of the partial networking request release information vector that is defined in bytes as an index starting with 0.
rootSoftware Composition RootSwComposition Prototype 0..1 aggr Aggregation of the root software composition, containing all software components in the System in a hierarchical structure. This element is not required when the System description is used for a network-only use-case. atpVariation: The RootSwCompositionPrototype can vary. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=rootSoftwareComposition.shortName, root SoftwareComposition.variationPoint.shortLabel vh.latestBindingTime=systemDesignTime
swCluster CpSoftwareCluster * ref CP Software Clusters of this System Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=swCluster.cpSoftwareCluster, sw Cluster.variationPoint.shortLabel vh.latestBindingTime=systemDesignTime
system Documentation Chapter * aggr Possibility to provide additional documentation while defining the System. The System documentation can be composed of several chapters. Stereotypes: atpSplitable; atpVariation Tags: atp.Splitkey=systemDocumentation.shortName, system Documentation.variationPoint.shortLabel vh.latestBindingTime=systemDesignTime xml.sequenceOffset=-10
systemVersion RevisionLabelString 0..1 attr Version number of the System Description.

表C.51:SystemSignal(SystemSignal)

| 包 | M2::AUTOSARTemplates::SystemTemplate::Fibex::FibexCore::CoreCommunication | | 说明 | The system signal represents the communication system's view of data exchanged between SW components which reside on different ECUs. The system signals allow to represent this communication in a flattened structure, with exactly one system signal defined for each data element prototype sent and received by connected SW component instances. Tags: atp.recommendedPackage=SystemSignals | | 基类 | ARElement , ARObject , CollectableElement , Identifiable , MultilanguageReferrable , Packageable Element , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
dynamicLength Boolean 0..1 attr The length of dynamic length signals is variable in run-time. Only a maximum length of such a signal is specified in the configuration (attribute length in ISignal element).
physicalProps SwDataDefProps 0..1 aggr Specification of the physical representation. Stereotypes: atpSplitable Tags: atp.Splitkey=physicalProps

表C.52:Unit(Unit)

| 包 | M2::MSR::AsamHdo::Units | | 说明 | This is a physical measurement unit. All units that might be defined should stem from SI units. In order to convert one unit into another factor and offset are defined. For the calculation from SI-unit to the defined unit the factor (factorSiToUnit ) and the offset (offsetSiTo Unit ) are applied as follows: x [{unit}] := y * [{siUnit}] * factorSiToUnit [[unit]/{siUnit}] + offsetSiToUnit [{unit}] For the calculation from a unit to SI-unit the reciprocal of the factor (factorSiToUnit ) and the negation of the offset (offsetSiToUnit ) are applied. y {siUnit} := (x*{unit} - offsetSiToUnit [{unit}]) / (factorSiToUnit [[unit]/{siUnit}] Tags: atp.recommendedPackage=Units | | 基类 | ARElement , ARObject , CollectableElement , Identifiable , MultilanguageReferrable , Packageable Element , Referrable | | 聚合于 | ARPackage.element |

属性 类型 多重性 种类 备注
displayName SingleLanguageUnit Names 0..1 aggr This specifies how the unit shall be displayed in documents or in user interfaces of tools.The displayName corresponds to the Unit.Display in an ASAM MCD-2MC file. Tags: xml.sequenceOffset=20
factorSiToUnit Float 0..1 attr This is the factor for the conversion from SI Units to units. The inverse is used for conversion from units to SI Units. Tags: xml.sequenceOffset=30
offsetSiToUnit Float 0..1 attr This is the offset for the conversion from and to siUnits. Tags: xml.sequenceOffset=40
physical Dimension PhysicalDimension 0..1 ref This association represents the physical dimension to which the unit belongs to. Note that only values with units of the same physical dimensions might be converted. Tags: xml.sequenceOffset=50

表C.53:ValueSpecification(ValueSpecification)

| 包 | M2::AUTOSARTemplates::CommonStructure::Constants | | 说明 | Base class for expressions leading to a value which can be used to initialize a data object. | | 基类 | ARObject | | 子类 | AbstractRuleBasedValueSpecification , ApplicationValueSpecification, CompositeValueSpecification , ConstantReference, NotAvailableValueSpecification, NumericalValueSpecification, ReferenceValue Specification, TextValueSpecification | | 聚合于 | ApplicationAssocMapElementValueSpecification.key, ApplicationAssocMapElementValueSpecification. value, ArrayValueSpecification.element, CalibrationParameterValue.applInitValue, CalibrationParameter Value.implInitValue, ConstantSpecification.valueSpec, CryptoServiceKey.developmentValue, Diagnostic EnvDataCondition.compareValue, DiagnosticEnvDataElementCondition.compareValue, FieldSenderCom Spec.initValue, ISignal.initValue, ISignal.timeoutSubstitutionValue, NonqueuedReceiverComSpec.init Value, NonqueuedReceiverComSpec.timeoutSubstitutionValue, NonqueuedSenderComSpec.initValue, NvProvideComSpec.ramBlockInitValue, NvProvideComSpec.romBlockInitValue, NvRequireComSpec.init Value, ParameterDataPrototype.initValue, ParameterProvideComSpec.initValue, ParameterRequireCom Spec.initValue, PersistencyDataRequiredComSpec.initValue, PersistencyKeyValuePair.initValue, Port DefinedArgumentValue.value, PortPrototypeBlueprintInitValue.value, RecordValueSpecification.field, SomeipEventDeployment.eventReceptionDefaultValue, StateManagementCompareCondition .compare Value, SwDataDefProps.invalidValue, VariableDataPrototype.initValue |

属性 类型 多重性 种类 备注
shortLabel Identifier 0..1 attr This can be used to identify particular value specifications for human readers, for example elements of a record type.

D. 术语表

  • Artifact 这是一个工作产品定义,为有形的工作产品类型提供描述和定义。工件可以由其他工件组成([26])。

在高层上,一个工件表示为单个概念性的文件。

  • AUTOSAR Tool 这是一个软件工具,支持方法论中定义为一个或多个 AUTOSAR 任务的任务。根据所支持的任务,AUTOSAR 工具可以用作创作工具、转换工具、处理工具或它们的组合(见单独的定义)。

  • AUTOSAR Authoring Tool 用于创建和修改 AUTOSAR XML 描述的 AUTOSAR 工具。示例:系统描述编辑器。

  • AUTOSAR Converter Tool 用于通过转换来自其他 AUTOSAR XML 文件的信息来创建 AUTOSAR XML 文件的 AUTOSAR 工具。示例:ECU Flattener。

  • AUTOSAR Definition 这是可以取值的参数的定义。可以说参数值是定义的实例。但在 AUTOSAR 的元模型层次结构中,定义本身也是元模型的实例,因此被视为一种描述。AUTOSAR 定义的示例有:EcucParameterDef、PostBuildVariantCriterion、SwSystemconst。

  • AUTOSAR XML Description 在 AUTOSAR 中,这意味着 “已填写的模板”。实际上,AUTOSAR XML 描述是一个 AUTOSAR 模型的 XML 表示。

AUTOSAR XML 描述可以由多个文件组成。每个单独的文件表示一个 AUTOSAR 局部模型,并应能够针对 AUTOSAR XML 模式成功验证。

  • AUTOSAR Meta-Model 这是一个定义了描述 AUTOSAR 系统的语言的 UML 2.0 模型。AUTOSAR 元模型是 AUTOSAR 模板的 UML 表示。UML 2.0 类图用于描述属性及其相互关系。构造型、UML 标签和 OCL 表达式(对象约束语言)用于定义特定的语义和约束。

  • AUTOSAR Meta-Model Tool AUTOSAR 元模型工具是在 AUTOSAR 元模型上生成不同视图(类表、约束列表、图、XML 模式等)的工具。

  • AUTOSAR Model 这是 AUTOSAR 产品的一个表示。AUTOSAR 模型按照 AUTOSAR 方法论表示适合预期用途的方面。

严格来说,这是 AUTOSAR 元模型的一个实例。AUTOSAR 模型中包含的信息可以是任何可以按照 AUTOSAR 元模型表示的内容。

  • AUTOSAR Processor Tool 用于通过处理来自 AUTOSAR XML 文件的信息来创建非 AUTOSAR 文件的 AUTOSAR 工具。示例:RTE 生成器。

  • AUTOSAR Specification Element AUTOSAR 规范元素是 AUTOSAR 规范的一部分的命名元素。示例:需求、约束、规范项、元模型中的类或属性、方法论、交付物、方法论活动、模型元素、BSW 模块等。

  • AUTOSAR Template 术语 “模板” 在 AUTOSAR 中用于描述不同种类描述的格式。术语模板源于这样的想法:AUTOSAR 定义了一种表格,应当填写该表格以描述一个模型。填写后的表格称为描述。

实际上,AUTOSAR 模板现在被定义为一个元模型。

  • AUTOSAR Validation Tool 一种专门的 AUTOSAR 工具,能够根据某个 profile 定义的规则检查 AUTOSAR 模型。

  • AUTOSAR XML Schema 这是一个定义交换 AUTOSAR 模型的语言的 W3C XML 模式。该模式派生自 AUTOSAR 元模型。AUTOSAR XML 模式定义了 AUTOSAR 数据交换格式。

  • Blueprint 这是一个模型,其他模型可以通过复制和细化从它派生。注意,与元模型和类型相反,这一过程不是实例化。

  • Instance 通常这是模型或类型的一个特定样本。

  • Life Cycle 生命周期是模型元素在其生存期间的开发/演化阶段进程。

  • Meta-Model 元模型定义了模型的构建块。从这个意义上说,元模型表示构建模型的语言。

  • Meta-Data 这包括关于数据的相关信息,包括关于作者、版本、访问权限、时间戳等的信息。

  • Model 模型是对现实的简化表示。模型表示适合预期目的的方面。

  • Partial Model 局部模型是模型的一个部分,意图持久化在一个特定的工件中。

  • Pattern in GST 这是通过应用模型变换来简化元模型定义的一种方法。该变换从一个带注解的模型创建一个增强的模型。

  • Profile Authoring Support Data 用于高效创作 profile 的数据。例如:可引用的约束、元类、元属性或其他可复用模型资产(blueprint)的列表。

  • Profile Authoring Tool 专注于为数据交换点创作 profile 的专门的 AUTOSAR 工具。它例如提供从零创建 profile、修改现有 profile 或组合现有 profile 的支持。

  • Profile Compatibility Checker Tool 专注于检查数据交换 profile 兼容性的专门的 AUTOSAR 工具。注意,该兼容性检查既包括工程师的手动兼容性检查,也包括使用更形式化算法的自动化辅助。

  • Profile Consistency Checker Tool 专注于检查 profile 一致性的专门的 AUTOSAR 工具。

  • Property 属性是对象的结构特征。例如,“连接器” 具有 “接收端口” 和 “发送端口” 属性。

  • Prototype 这是另一个类型的定义中某个类型角色的实现。换句话说,一个类型可以包含 Prototype,而这些 Prototype 又由 “类型” 定义类型。当该类型被实例化时,这些原型中的每一个都成为一个实例。

  • Type 类型提供可以出现在该类型各种角色中的特征。

  • Value 这是赋给 “定义” 的特定值。

  • Variability 系统的可变性是它描述一组变体的品质。这些变体由变体特定的属性设置和/或选择来表征。例如,这样的系统属性选择体现在连接的特定 “接收端口” 上。

  • Variant 系统变体是系统的一个具体实现,其所有属性都已分别被设置或选择。就绑定时间而言,软件系统不再有可变性。

这通过 EvaluatedVariantSet 实现。

  • Variation Binding 变体是变体绑定过程的结果,该过程通过为系统的所有属性指派特定的值/选择来解析系统的可变性。

这通过 VariationPoint 实现。

  • Variation Binding Time 变体绑定时间决定方法论中解析一组可变属性所给可变性的步骤。

这通过相关属性上的 vh.LatestBindingtime 实现。

变体定义时间决定方法论中定义变体点的步骤。

变体点指示一个属性受变体支配。此外,它与一个条件和绑定时间相关联,条件和绑定时间定义选择/设置具体变体的系统上下文。

这通过 VariationPoint 实现。

E. AUTOSAR 可追溯项变更历史

E.1. 本文档 R4.2.1 版本的可追溯项变更历史

E.1.1. R4.2.1 中新增的规范项

| Number | Heading |

| [TPS_DEXT_01000] | AUTOSAR diagnostics supports two kinds of data identifiers | | [TPS_DEXT_01001] | Definition of a fixed-sized array | | [TPS_DEXT_01002] | Definition of a variable-sized array | | [TPS_DEXT_01003] | DiagnosticContributionSet is the central part of the DiagnosticEx- tract | | [TPS_DEXT_01004] | DiagnosticContributionSet defines the scope of the DiagnosticEx- tract | | [TPS_DEXT_01005] | DiagnosticContributionSet can exist independently | | [TPS_DEXT_01006] | The role of DiagnosticServiceTable s in the context of a Diagnostic- ContributionSet | | [TPS_DEXT_01007] | Common properties of a DiagnosticExtract | | [TPS_DEXT_01008] | DiagnosticContributionSet defines the scope for the application of the common diagnostic properties | | [TPS_DEXT_01009] | Limited support for the configuration of custom diagnostic services | | [TPS_DEXT_01010] | Configuration of custom diagnostic services | | [TPS_DEXT_01011] | Semantics of DiagnosticSession . id | | [TPS_DEXT_01012] | Rationale for the modeling of the multiplicity of DiagnosticAccessPermis- sion . securityLevel | | [TPS_DEXT_01013] | Specification of sub-functions by means of attribute DiagnosticService- Instance . category | | [TPS_DEXT_01014] | Possible values of the category attribute for diagnostic services | | [TPS_DEXT_01015] | Meaning of attributes of DiagnosticIOControl | | [TPS_DEXT_01016] | The capability returnControlToEcu | | [TPS_DEXT_01017] | Meaning of DiagnosticIOControl . dataIdentifier | | [TPS_DEXT_01018] | InputOutput Control does not define any sub-functions | | [TPS_DEXT_01019] | Correspondence of category values to numerical values mentioned in the ISO 14229-1 | | [TPS_DEXT_01020] | Manufacturer-specific values for sub-functions of service EcuReset | | [TPS_DEXT_01021] | Semantics of DiagnosticEcuReset . customSubFunctionNumber | | [TPS_DEXT_01022] | ClearDiagnosticInformation does not define any sub-functions | | [TPS_DEXT_01023] | WriteMemoryByAddress does not define any sub-functions | | [TPS_DEXT_01024] | ReadMemoryByAddress does not define any sub-functions | | [TPS_DEXT_01025] | TransferExit does not define any sub-functions | | [TPS_DEXT_01026] | DataTransfer does not define any sub-functions | | Number | Heading | | [TPS_DEXT_01027] | RequestDownload does not define any sub-functions | | [TPS_DEXT_01028] | RequestUpload does not define any sub-functions | | [TPS_DEXT_01029] | Correspondence of category values to numerical values mentioned in the ISO 14229-1 | | [TPS_DEXT_01030] | Manufacturer-specific values for sub-functions of service Communication- Control | | [TPS_DEXT_01031] | Semantics of DiagnosticComControl . customSubFunctionNumber | | [TPS_DEXT_01032] | Impact of the DiagnosticComControlClass on the state management for CommunicationCluster s | | [TPS_DEXT_01033] | Semantics of triggers in the context of a DiagnosticResponseOnEvent | | [TPS_DEXT_01034] | Sub-functions of the service ReadDTCInformation | | [TPS_DEXT_01035] | Existence of DiagnosticRoutine . stop and DiagnosticRoutine . re- questResult | | [TPS_DEXT_01036] | Work-flow within the execution of the diagnostic service SecurityAccess | | [TPS_DEXT_01037] | Semantics of DiagnosticSecurityAccess . requestSeedId | | [TPS_DEXT_01038] | Motivation for making the reference DiagnosticSecurityAccess . secu- rityLevel glyph[lessmuch] atpSplitable glyph[greatermuch] | | [TPS_DEXT_01039] | Identification of the sub-function of DiagnosticSessionControl | | [TPS_DEXT_01040] | Use case where the DiagnosticExtract refers to software-components | | [TPS_DEXT_01041] | Semantics of attribute DiagnosticServiceDataMapping . diagnostic- DataElement | | [TPS_DEXT_01042] | Dem uses DiagnosticServiceDataMapping | | [TPS_DEXT_01043] | Purpose of DiagnosticServiceSwMapping | | [TPS_DEXT_01044] | BswServiceDependency needs to act as the target of a reference | | [TPS_DEXT_01045] | Supported diagnostic services | | [TPS_DEXT_01046] | ECUconfiguration is not suitable to be exchanged between partners in anECU development project | | [TPS_DEXT_01047] | Differences in the development processes for diagnostics at automotive OEMs and ECU suppliers | | [TPS_DEXT_01048] | Actual algorithm for the diagnostic event debouncing | | [TPS_DEXT_01049] | Consistency of DiagnosticServiceSwMapping with respect to routine IDs | | [TPS_DEXT_01050] | Consistency of DiagnosticServiceSwMapping with respect to data IDs | | [TPS_DEXT_01051] | Consistency of DiagnosticServiceSwMapping with respect to data IDs | | [TPS_DEXT_01052] | Existence of attribute DiagnosticServiceInstance . accessPermission | | [TPS_DEXT_01053] | Existence of DiagnosticSecurityAccess . securityLevel | | [TPS_DEXT_01054] | Existence of DiagnosticDataByIdentifier . dataIdentifier | | [TPS_DEXT_01055] | Standardized values of DiagnosticContributionSet . category | | [TPS_DEXT_01056] | Applicable values for DiagnosticEcuReset . category | | [TPS_DEXT_01057] | Allowed values of DiagnosticComControl . category | | [TPS_DEXT_01058] | Standardized values for DiagnosticDynamicallyDefineDataIdenti- fier . category | | Number | Heading | | [TPS_DEXT_01059] | Applicable values for DiagnosticPeriodicRate . category | | [TPS_DEXT_01060] | Applicable values for DiagnosticReadDTCInformation . category | | [TPS_DEXT_01061] | Supported scenarios for the definition of access permission | | [TPS_DEXT_01062] | Existence of DiagnosticServiceClass . accessPermissionValidity in an incomplete model | | [TPS_DEXT_01063] | Existence of DiagnosticServiceClass . accessPermissionValidity in a complete model | | [TPS_DEXT_01064] | Textually formulated content attached to DiagnosticTroubleCode | | [TPS_DEXT_01065] | Different approaches to provide semi-formal textual content attached to a Di- agnosticTroubleCode | | [TPS_DEXT_01066] | Standardized values of DiagnosticTroubleCode . introduction . trace | | [TPS_DEXT_01067] | Textually formulated content attached to DiagnosticEvent | | [TPS_DEXT_01068] | Textual description with respect to the DiagnosticEvent | | [TPS_DEXT_01069] | Standardized values of DiagnosticEvent . introduction . structure- dReq | | [TPS_DEXT_01070] | Description of textually semi-formal formulated pre- and post-conditions for the validity of DiagnosticAccessPermission | | [TPS_DEXT_01071] | Standardized values of DiagnosticAccessPermission . introduction . structuredReq | | [TPS_DEXT_01072] | Purpose of attribute DiagnosticDataIdentifier . representsVin | | [TPS_DEXT_01073] | Diagnostic properties that are specific to an individual EcuInstance | | [TPS_DEXT_01074] | Difference between the attributes DiagnosticComControl . specificCha- nnel and DiagnosticComControl . subNodeChannel | | [TPS_DEXT_01075] | standardized values for the attribute DiagnosticControlDTCSetting . category | | [TPS_DEXT_01076] | Identification of sub-functions of diagnostic service ControlDTCSetting | | [TPS_DEXT_01077] | Modeling of DiagnosticRoutine | | [TPS_DEXT_01078] | Not possible to use the attribute category for the identification of the sub- function of diagnostic service RoutineControl | | [TPS_DEXT_01079] | Modeling of the arguments to a DiagnosticRoutine | | [TPS_DEXT_01080] | Diagnostic Routine needs to be started | | [TPS_DEXT_01081] | Modeling of DiagnosticSessionControl | | [TPS_DEXT_01082] | Existence of DiagnosticSessionControl . diagnosticSession | | [TPS_DEXT_01083] | Semantics of a DiagnosticEvent | | [TPS_DEXT_01084] | DiagnosticEvent can be connected to one or multiple indicators | | [TPS_DEXT_01085] | Semantics of DiagnosticConditionGroup s | | [TPS_DEXT_01086] | Reference to DiagnosticOperationCycle | | [TPS_DEXT_01087] | Semantics of DiagnosticOperationCycle | | [TPS_DEXT_01088] | Semantics of DiagnosticRoutine . id | | [TPS_DEXT_01089] | Definition of an identifier of a DiagnosticIOControl |

| Number | Heading |

| [TPS_DEXT_01090] | Diagnostic service RequestFileTransfer does not define any sub- functions | | [TPS_DEXT_03000] | ISO 14229-1 reserves values of DiagnosticTroubleCodeGroup . group- Number | | [TPS_DEXT_03001] | Different types of conditions | | [TPS_DEXT_03002] | Two kind of mappings | | [TPS_DEXT_03003] | Semantics of DiagnosticEventToTroubleCodeUdsMapping | | [TPS_DEXT_03004] | DiagnosticEvent and DiagnosticDebounceAlgorithmProps | | [TPS_DEXT_03005] | Existence of DiagnosticEventToDebounceAlgorithmMapping | | [TPS_DEXT_03006] | Values of the individual DiagnosticStorageCondition s | | [TPS_DEXT_03007] | Semantics of DiagnosticEventPortMapping | | [TPS_DEXT_03008] | Semantics of DiagnosticExtendedDataRecord | | [TPS_DEXT_03009] | Semantics of DiagnosticFreezeFrame | | [TPS_DEXT_03010] | Combination of DiagnosticCondition s to DiagnosticCondition- Group s | | [TPS_DEXT_03011] | Clearing request for a DiagnosticEvent | | [TPS_DEXT_03012] | Three kinds of DTCs | | [TPS_DEXT_03013] | Common properties of a DTC | | [TPS_DEXT_03014] | Semantics of DiagnosticTroubleCodeGroup | | [TPS_DEXT_03015] | EnableCondition s have to be put into a DiagnosticEnableCondition- Group | | [TPS_DEXT_03016] | StorageCondition s have to be put into a DiagnosticStorageCondi- tionGroup | | [TPS_DEXT_03017] | Semantics of DiagnosticOperationCyclePortMapping | | [TPS_DEXT_03018] | Semantics of DiagnosticEnableConditionPortMapping | | [TPS_DEXT_03019] | Semantics of DiagnosticStorageConditionPortMapping | | [TPS_DEXT_03020] | Semantics of DiagnosticDemProvidedDataMapping | | [TPS_DEXT_03021] | Aging | | [TPS_DEXT_03022] | Different kinds of DiagnosticIndicator s |

E.1.2. R4.2.1 中新增的约束

| Number | Heading |

| [constr_1324] | Existence of attribute DiagnosticDataIdentifier . representsVin | | [constr_1325] | Allowed attributes of SwDataDefProps for DiagnosticDataElement . sw- DataDefProps | | [constr_1326] | Existence of a variable-sized array | | Number | Heading | | [constr_1327] | Multiplicity of DiagnosticContributionSet . ecuInstance | | [constr_1328] | Consistency of DiagnosticContributionSet . ecuInstance and Diagnostic- ServiceTable . ecuInstance | | [constr_1329] | Existence of concrete sub-classes of DiagnosticServiceClass in the context cre- ated by a DiagnosticContributionSet | | [constr_1330] | Custom service identifier shall not overlap with standardized service identifiers | | [constr_1331] | Existence of DiagnosticEcuReset . customSubFunctionNumber | | [constr_1332] | Value range for DiagnosticEcuReset . customSubFunctionNumber | | [constr_1333] | Existence of DiagnosticMemoryIdentifier . memoryLowAddress and Diag- nosticMemoryIdentifier . memoryHighAddress | | [constr_1334] | Existence of DiagnosticComControl . customSubFunctionNumber | | [constr_1335] | Possible values for DiagnosticComControl . customSubFunctionNumber | | [constr_1336] | Applicable value range for DiagnosticComControlSpecificChannel . subnet- Number | | [constr_1337] | Allowed value range for attribute DiagnosticComControlSubNodeChannel . subNodeNumber | | [constr_1338] | Maximum number of aggregated DiagnosticReadDataByPeriodicIDClass . pe- riodicRate | | [constr_1339] | Existence of DiagnosticRoutine . start | | [constr_1340] | Consistency of DiagnosticServiceSwMapping with respect to synchronously called DiagnosticRoutine s | | [constr_1341] | Consistency of DiagnosticServiceSwMapping with respect to asynchronously called DiagnosticRoutine s | | [constr_1342] | Possible values for DiagnosticSecurityAccess . requestSeedId | | [constr_1343] | Simultaneous existence of the attributes DiagnosticServiceDataMapping . diagnosticDataElement and DiagnosticDataByIdentifier . dataIdenti- fier | | [constr_1344] | Condition for the identification of data types of attributes DiagnosticSer- viceDataMapping . mappedDataElement and DiagnosticServiceDataMap- ping . diagnosticDataElement | | [constr_1345] | DiagnosticDataElement shall not (finally) be aggregated by a DiagnosticRou- tine | | [constr_1346] | Allowed values of DiagnosticServiceSwMapping . serviceInstance | | [constr_1347] | Existence of attributes of DiagnosticServiceSwMapping | | [constr_1349] | Value of udsDtcValue shall be unique | | [constr_1350] | Value of DiagnosticTroubleCodeGroup . groupNumber shall be unique | | [constr_1351] | Value of DiagnosticTroubleCodeGroup . groupNumber | | [constr_1352] | Existence of maxNumberFreezeFrameRecords vs. freezeFrame | | [constr_1353] | Applicability of [constr_1352] | | [constr_1354] | Existence of attribute DiagnosticTroubleCodeProps . freezeFrameContent | | [constr_1355] | Value of recordNumber | | [constr_1356] | Value of recordNumber shall be unique | | [constr_1357] | Value of recordNumber |

| Number | Heading |

| [constr_1358] | Value of recordNumber shall be unique | | [constr_1359] | Existence of attribute DiagnosticDebounceAlgorithmProps . debounceCoun- terStorage | | [constr_1360] | Usage of DiagEventDebounceMonitorInternal is not supported in the context of DiagnosticDebounceAlgorithmProps | | [constr_1361] | Number of DiagnosticEventToEnableConditionGroupMapping elements per DiagnosticEvent | | [constr_1362] | Number of DiagnosticEventToStorageConditionGroupMapping elements per DiagnosticEvent | | [constr_1365] | Multiplicity of DiagnosticResponseOnEvent . event | | [constr_1366] | Event ID in the context of diagnostic service ResponseOnEvent shall be unique | | [constr_1376] | Multiplicity of reference DiagnosticTroubleCodeProps . memoryDestination | | [constr_1377] | Existence of reference DiagnosticTroubleCodeProps . memoryDestination | | [constr_1378] | Value of DiagnosticMemoryDestinationUserDefined . memoryId | | [constr_1379] | Existence of DiagnosticMemoryDestinationPrimary | | [constr_1380] | Existence of DiagnosticMemoryDestinationMirror |

E.2. 本文档 R4.2.2 版本的可追溯项变更历史

E.2.1. R4.2.2 中新增的可追溯项

无

E.2.2. R4.2.2 中变更的可追溯项

无

E.2.3. R4.2.2 中删除的可追溯项

无

E.2.4. R4.2.2 中新增的约束

| Number | Heading |

| [constr_1394] | Value of DiagnosticDataElement . maxNumberOfElements depending on its ex- istence |

E.2.5. R4.2.2 中变更的约束

无

E.2.6. R4.2.2 中删除的约束

无

E.3. 本文档 R4.3.0 版本的可追溯项变更历史

E.3.1. R4.3.0 中新增的可追溯项

| Number | Heading |

| [TPS_DEXT_01091] | Relation between a DiagnosticServiceTable and one or more Diagnos- ticConnection s | | [TPS_DEXT_01092] | Semantics of DiagnosticParameterIdentifier | | [TPS_DEXT_01093] | Definition of legislative freeze frame for WWWH-OBD | | [TPS_DEXT_01094] | Semantics of meta-class DiagnosticTroubleCodeUdsToTrouble- CodeObdMapping | | [TPS_DEXT_01095] | Definition of 'alias' diagnostic event for the creation of a Fim configuration in the diagnostic extract | | [TPS_DEXT_01096] | Semantics of DiagnosticFunctionInhibitSource | | [TPS_DEXT_01097] | Standardized value of StructuredReq . category for the modeling of Diag- nosticFunctionInhibitSource | | [TPS_DEXT_01098] | Semantics of attribute DiagnosticFunctionInhibitSource . event | | [TPS_DEXT_01099] | Semantics of attribute DiagnosticFunctionInhibitSource . event- Group | | [TPS_DEXT_01100] | Consequence of the existence of DiagnosticFimAliasEventMapping | | [TPS_DEXT_01101] | Consequence of the existence of DiagnosticFimAliasEventGroupMap- ping | | Number | Heading | | [TPS_DEXT_01102] | Semantics of DiagnosticFimFunctionMapping | | [TPS_DEXT_01103] | Semantics of meta-class DiagnosticJ1939SpnMapping | | [TPS_DEXT_01104] | Difference between DiagnosticJ1939FreezeFrame and Diagnos- ticJ1939ExpandedFreezeFrame | | [TPS_DEXT_01105] | Relation of DiagnosticJ1939Spn to DiagnosticJ1939FreezeFrame and DiagnosticJ1939ExpandedFreezeFrame | | [TPS_DEXT_01106] | Relation of Controller Application to SPN | | [TPS_DEXT_01107] | Definition of service-only DTC | | [TPS_DEXT_01108] | Purpose of the DiagnosticJ1939SwMapping | | [TPS_DEXT_01110] | Standardized values of DiagnosticIumprGroup . category | | [TPS_DEXT_01111] | Legislative freeze frame for the OBD-II case | | [TPS_DEXT_01112] | Definition of a diagnostic trouble code for the implementation of WWH-OBD | | [TPS_DEXT_01113] | Evaluation of a DiagnosticEnvConditionFormula | | [TPS_DEXT_01114] | DiagnosticEnvConditionFormula that has no part s | | [TPS_DEXT_01115] | DiagnosticEnvConditionFormula that has one part | | [TPS_DEXT_01116] | DiagnosticEnvConditionFormula that has more than one part | | [TPS_DEXT_01117] | Semantics of DiagnosticEnvConditionFormula . nrcValue | | [TPS_DEXT_01118] | Semantics of DiagnosticEnvDataCondition | | [TPS_DEXT_01119] | Semantics of DiagnosticEnvModeCondition | | [TPS_DEXT_01120] | Comparison of the value of a ModeDeclarationGroupPrototype with a ModeDeclaration | | [TPS_DEXT_01121] | Semantics of DiagnosticFunctionIdentifier | | [TPS_DEXT_01122] | Indication whether a EcuInstance supports OBD | | [TPS_DEXT_01124] | Semantics of meta-class DiagnosticProtocol | | [TPS_DEXT_01125] | Support for diagnostic service RequestCurrentPowertrainDiagnostic- Data | | [TPS_DEXT_01126] | Support of OBD service RequestPowertrainFreezeFrameData | | [TPS_DEXT_01127] | Semantics of meta-class DiagnosticRequestEmissionRelatedDTC | | [TPS_DEXT_01128] | Semantics of meta-class DiagnosticClearResetEmissionRelatedInfo | | [TPS_DEXT_01129] | Support for OBD diagnostic service RequestOnBoardMonitoringTestRe- sults | | [TPS_DEXT_01130] | Support of OBD diagnostic service RequestControlOfOnBoardDevice | | [TPS_DEXT_01131] | Support for OBD diagnostic service RequestVehicleInformation | | [TPS_DEXT_01132] | Support for OBD diagnostic service RequestEmissionRelatedDiagnos- ticTroubleCodesPermanentStatus | | [TPS_DEXT_01133] | Support for WWH-OBD within the diagnostic extract | | [TPS_DEXT_01134] | Definition of a DiagnosticDataElement used in the context of a DID ob- tained by sender-receiver communication | | [TPS_DEXT_01135] | Definition of a DiagnosticDataElement used in the context of a DID ob- tained by client/server communication | | [TPS_DEXT_01136] | Definition of a DiagnosticDataElement used in the context of a diagnostic routine |

| Number | Heading |

| [TPS_DEXT_01137] | Applicability of DiagnosticDataIdentifier . didSize | | [TPS_DEXT_01138] | Applicability of DiagnosticDataIdentifier . supportInfoByte | | [TPS_DEXT_01139] | Semantics of the references from DiagnosticAccessPermission |

E.3.2. R4.3.0 中变更的可追溯项

| Number | Heading |

| [TPS_DEXT_01006] | The role of DiagnosticServiceTable s | | [TPS_DEXT_01052] | Existence of attribute DiagnosticServiceInstance . accessPermission | | [TPS_DEXT_01060] | Applicable values for DiagnosticReadDTCInformation . category | | [TPS_DEXT_01074] | Difference between the attributes DiagnosticComControlClass . speci- ficChannel and DiagnosticComControlClass . subNodeChannel | | [TPS_DEXT_03003] | Semantics of DiagnosticEventToTroubleCodeUdsMapping |

E.3.3. R4.3.0 中删除的可追溯项

| Number | Heading |

| [TPS_DEXT_01058] | Standardized values for DiagnosticDynamicallyDefineDataIdenti- fier . category | | [TPS_DEXT_01059] | Applicable values for DiagnosticPeriodicRate . category |

E.3.4. R4.3.0 中新增的约束

| Number | Heading |

| [constr_1405] | Value of DiagnosticProtocol . serviceTable vs. DiagnosticServiceTable . protocolKind | | [constr_1406] | DiagnosticServiceTable . diagnosticConnection vs. DiagnosticProto- col . diagnosticConnection | | [constr_1411] | Existence of DiagnosticMemoryIdentifier . memoryHighAddressLabel vs. DiagnosticMemoryIdentifier . memoryHighAddress |

| Number | Heading |

| [constr_1412] | Existence of DiagnosticMemoryIdentifier . memoryLowAddressLabel vs. DiagnosticMemoryIdentifier . memoryLowAddress | | [constr_1419] | Value of DiagnosticSecurityLevel . accessDataRecordSize | | [constr_1421] | Consistency of DiagnosticDynamicallyDefineDataIdentifierClass . sub- function | | [constr_1435] | Debouncing in the presence of a DiagnosticEventPortMapping | | [constr_1447] | Restrictions for the value of DiagnosticParameterIdentifier . id | | [constr_1448] | Interval of DiagnosticParameterIdentifier . id | | [constr_1449] | PID shall only carry a fixed-length collection of data | | [constr_1450] | Service mapping for ODB mode 0x01 for DiagnosticParameterIdentifier | | [constr_1451] | Service mapping for OBD mode 0x09 for DiagnosticInfoType | | [constr_1452] | Service mapping for OBD mode 0x08 for DiagnosticInfoType | | [constr_1453] | References from DiagnosticFunctionInhibitSource | | [constr_1454] | DiagnosticFimFunctionMapping shall only reference a SwcServiceDepen- dency that aggregates FunctionInhibitionNeeds | | [constr_1455] | Relation of DiagnosticJ1939Node to J1939NmNode | | [constr_1456] | Valid interval for attribute DiagnosticTroubleCodeJ1939 . fmi | | [constr_1457] | Service-only DTCs shall refer to a common memory section | | [constr_1458] | Reference to DiagnosticMemoryDestination | | [constr_1459] | Existence of attributes of DiagnosticTroubleCodeProps | | [constr_1460] | Restrictions for the value of DiagnosticInfoType . id | | [constr_1461] | Restrictions for the value of DiagnosticTestRoutineIdentifier . id | | [constr_1462] | Restrictions for the value of DiagnosticTestResult . testIdentifier . id | | [constr_1464] | Allowed value range of DiagnosticEnvConditionFormula . nrcValue | | [constr_1465] | Allowed values of compareType in the context of a DiagnosticEnvDataCondi- tion | | [constr_1466] | Allowed values of compareType in the context of a DiagnosticEnvModeCondi- tion | | [constr_1467] | References in DiagnosticEnvModeCondition | | [constr_1470] | Value of DiagnosticParameter . bitOffset | | [constr_1471] | Existence of DiagnosticDataIdentifier . didSize | | [constr_1472] | Existence of DiagnosticDataIdentifier . supportInfoByte |

E.3.5. R4.3.0 中变更的约束

| Number | Heading |

| [constr_1325] | Allowed attributes of SwDataDefProps for DiagnosticDataElement . sw- DataDefProps | | [constr_1327] | Multiplicity of DiagnosticEcuInstanceProps . ecuInstance | | [constr_1328] | Consistency of DiagnosticEcuInstanceProps . ecuInstance and Diagnos- ticServiceTable . ecuInstance |

E.3.6. R4.3.0 中删除的约束

无

E.4. 本文档 R4.3.1 版本的可追溯项变更历史

E.4.1. 4.3.1 中新增的规范项

| Number | Heading |

| [TPS_DEXT_01140] | Values contained in DiagnosticExtract shall be taken for the derivation of basic software modules |

E.4.2. 4.3.1 中变更的规范项

| Number | Heading |

| [TPS_DEXT_01087] | Semantics of DiagnosticOperationCycle |

E.4.3. 4.3.1 中删除的规范项

| Number | Heading |

| [TPS_DEXT_01073] | Diagnostic properties that are specific to an individual EcuInstance |

E.4.4. 4.3.1 中新增的约束

| Number | Heading |

| [constr_1509] | extendedDataRecord . recordNumber shall be unique within primary fault mem- ory | | [constr_1510] | extendedDataRecord . recordNumber shall be unique within mirror fault memory | | [constr_1511] | extendedDataRecord . recordNumber shall be unique within user-defined fault memory | | [constr_1512] | freezeFrame . recordNumber shall be unique within primary fault memory | | [constr_1513] | freezeFrame . recordNumber shall be unique within mirror fault memory | | [constr_1514] | freezeFrame . recordNumber shall be unique within user-defined fault memory | | [constr_1515] | Reference from DiagnosticRoutineControl to DiagnosticAccessPermis- sion has no meaning |

E.4.5. 4.3.1 中变更的约束

| Number | Heading |

| [constr_1325] | Allowed attributes of SwDataDefProps for DiagnosticDataElement . sw- DataDefProps | | [constr_1450] | Service mapping for ODB mode 0x01 for DiagnosticParameterIdentifier | | [constr_1451] | Service mapping for OBD mode 0x09 for DiagnosticInfoType |

E.4.6. 4.3.1 中删除的约束

| Number | Heading |

| [constr_1356] | Value of recordNumber shall be unique | | [constr_1358] | Value of recordNumber shall be unique |

E.5. 本文档 R4.4.0 版本的可追溯项变更历史

E.5.1. 4.4.0 中新增的规范项

| Number | Heading |

| [TPS_DEXT_01141] | Definition of a collection of test results | | [TPS_DEXT_01142] | Standardized values for DiagnosticDemProvidedDataMapping . dat- aProvider | | [TPS_DEXT_01143] | Definition of a custom trigger for an extended data record | | [TPS_DEXT_01144] | Definition of a custom trigger for a freeze frame | | [TPS_DEXT_01145] | Semantics of meta-class DiagnosticEventToTrouble- CodeJ1939Mapping | | [TPS_DEXT_01146] | Support for service ReadScalingDataByIdentifier (0x24) |

E.5.2. 4.4.0 中变更的规范项

| Number | Heading |

| [TPS_DEXT_01004] | DiagnosticContributionSet defines the scope of the DiagnosticEx- tract | | [TPS_DEXT_01041] | Semantics of attribute DiagnosticServiceDataMapping . diagnostic- DataElement | | [TPS_DEXT_01055] | Standardized values of DiagnosticContributionSet . category | | [TPS_DEXT_01079] | Modeling of the arguments to a DiagnosticRoutine | | [TPS_DEXT_03011] | Clearing request for a DiagnosticEvent | | [TPS_DEXT_03020] | Semantics of DiagnosticDemProvidedDataMapping |

E.5.3. 4.4.0 中删除的规范项

| Number | Heading |

| [TPS_DEXT_01137] | Applicability of DiagnosticDataIdentifier . didSize |

E.5.4. 4.4.0 中新增的约束

| Number | Heading |

| [constr_1552] | DiagnosticDataIdentifier referenced by DiagnosticDataIdentifier- Set | | [constr_1584] | DiagnosticDataElement shall not be used more than once in I/O Control in- stance | | [constr_1590] | DiagnosticEvent referenced in the role masterEvent or slaveEvent | | [constr_1591] | DiagnosticEvent referenced as slaveEvent shall not be reported by diagnostic monitor | | [constr_1612] | Reference from DiagnosticRoutineControl to DiagnosticAccessPermis- sion has no meaning | | [constr_1616] | Existence of attribute DiagnosticExtendedDataRecord . customTrigger | | [constr_1617] | Existence of attribute DiagnosticFreezeFrame . customTrigger | | [constr_1623] | Restriction on DiagnosticReadScalingDataByIdentifier . dataIdenti- fier | | [constr_1624] | Existence of DiagnosticDataElement . scalingInfoSize | | [constr_1633] | Existence of DiagnosticResponseOnEvent . event vs. DiagnosticRespon- seOnEvent . responseOnEventAction |

E.5.5. 4.4.0 中变更的约束

| Number | Heading |

| [constr_1325] | Allowed attributes of SwDataDefProps for DiagnosticDataElement . sw- DataDefProps | | [constr_1328] | Consistency of DiagnosticEcuInstanceProps . ecuInstance and Diagnos- ticServiceTable . ecuInstance |

E.5.6. 4.4.0 中删除的约束

| Number | Heading |

| [constr_1471] | Existence of DiagnosticDataIdentifier . didSize | | [constr_1515] | Reference from DiagnosticRoutineControl to DiagnosticAccessPermis- sion has no meaning |

E.6. 本文档 R19-11 版本的可追溯项变更历史

E.6.1. 19-11 中新增的规范项

| Number | Heading |

| [TPS_DEXT_01147] | Support for custom service instance | | [TPS_DEXT_01148] | Standardized values of DiagnosticIumprGroup . category | | [TPS_DEXT_01149] | Standardized values of DiagnosticIumprDenominatorGroup . cate- gory | | [TPS_DEXT_01150] | Semantics of meta-class DiagnosticControlEnableMaskBit |

E.6.2. 19-11 中变更的规范项

| Number | Heading |

| [TPS_DEXT_01060] | Applicable values for DiagnosticReadDTCInformation . category | | [TPS_DEXT_01134] | Definition of a DiagnosticDataElement used in the context of a DID ob- tained by sender-receiver communication | | [TPS_DEXT_01135] | Definition of a DiagnosticDataElement used in the context of a DID ob- tained by client/server communication | | [TPS_DEXT_01136] | Definition of a DiagnosticDataElement used in the context of a diagnostic routine |

E.6.3. 19-11 中删除的规范项

| Number | Heading |

| [TPS_DEXT_01009] | Limited support for the configuration of custom diagnostic services | | [TPS_DEXT_01010] | Configuration of custom diagnostic services | | [TPS_DEXT_01110] | Standardized values of DiagnosticIumprGroup . category |

E.6.4. 19-11 中新增的约束

| Number | Heading |

| [constr_1711] | Restriction of applicability of attribute typeOfFreezeFrameRecordNumeration | | [constr_1721] | DiagnosticControlEnableMaskBit . bitNumber shall be unique | | [constr_1722] | Relation between reference DiagnosticIOControl . dataIdentifier and at- tribute DiagnosticIOControl . controlEnableMaskBit | | [constr_1725] | Applicability of attribute DiagnosticMemoryDestination . dtcStatusAvail- abilityMask |

E.6.5. 19-11 中变更的约束

| Number | Heading |

| [constr_1344] | Condition for the identification of data types of attributes DiagnosticService- DataMapping . mappedDataElement | | [constr_1349] | Value of udsDtcValue shall be unique | | [constr_1354] | Existence of attribute DiagnosticTroubleCodeProps . snapshotRecordCon- tent | | [constr_1459] | Existence of attributes of DiagnosticTroubleCodeProps |

E.6.6. 19-11 中删除的约束

无

E.7. 本文档 R20-11 版本的可追溯项变更历史

E.7.1. R20-11 中新增的规范项

| Number | Heading |

| [TPS_DEXT_01151] | Semantics of attribute DiagnosticEvent . associatedEventIdentifi- cation | | [TPS_DEXT_01152] | Semantics of meta-class DiagnosticSecurityEventReporting- ModeMapping | | [TPS_DEXT_01153] | Semantics of meta-class DiagnosticEventToSecurityEventMapping |

E.7.2. R20-11 中变更的规范项

| Number | Heading |

| [TPS_DEXT_01041] | Semantics of attribute DiagnosticServiceDataMapping . diagnostic- DataElement | | [TPS_DEXT_01142] | Standardized values for DiagnosticDemProvidedDataMapping . dat- aProvider |

E.7.3. R20-11 中删除的规范项

| Number | Heading |

| [TPS_DEXT_01052] | Existence of attribute DiagnosticServiceInstance . accessPermis- sion | | [TPS_DEXT_01061] | Supported scenarios for the definition of access permission | | [TPS_DEXT_01062] | Existence of DiagnosticServiceClass . accessPermissionValidity in an incomplete model | | [TPS_DEXT_01063] | Existence of DiagnosticServiceClass . accessPermissionValidity in a complete model | | [TPS_DEXT_01076] | Identification of sub-functions of diagnostic service ControlDTCSetting |

E.7.4. R20-11 中新增的约束

| Number | Heading |

| [constr_1745] | Indirect reference to DiagnosticCommonElement | | [constr_1749] | Existence of DiagnosticInfoType . dataElement | | [constr_1750] | Existence of attribute DiagnosticParameterIdentifier . pidSize | | [constr_1752] | Existence of references owned by DiagnosticEnableConditionPortMapping | | [constr_1753] | Existence of references owned by DiagnosticStorageConditionPortMap- ping | | [constr_1756] | Existence of attributes DiagnosticExtendedDataRecord . trigger and update | | [constr_1757] | Existence of attribute DiagnosticTroubleCodeUds . udsDtcValue | | [constr_1758] | Existence of attribute DiagnosticTroubleCodeObd . obdDTCValue | | [constr_1759] | Existence of references owned by DiagnosticOperationCyclePortMapping | | [constr_1760] | Existence of DiagnosticExtendedDataRecord . recordElement | | [constr_1761] | Existence of attribute DiagnosticConnectedIndicator . healingCycle | | [constr_1762] | Existence of references owned by DiagnosticEventPortMapping | | Number | Heading | | [constr_1763] | Existence of attribute DiagnosticPeriodicRate . periodicRateCategory | | [constr_1766] | Existence of DiagEventDebounceCounterBased . counterJumpDownValue | | [constr_1767] | Existence of DiagEventDebounceCounterBased . counterJumpUpValue | | [constr_1768] | Existence of attribute DiagnosticEvent . associatedEventIdentification | | [constr_1772] | Unique DiagnosticSession and DiagnosticSecurityLevel for diagnostic routines that have the same identifier | | [constr_1780] | Existence of attribute DiagnosticTroubleCodeJ1939 . fmi | | [constr_1781] | Existence of attribute DiagnosticTroubleCodeJ1939 . spn | | [constr_1782] | Usage of internal data elements only for extended data records | | [constr_1790] | Existence of attribute DiagnosticParameter . bitOffset | | [constr_1791] | Existence of attribute DiagnosticParameter . dataElement | | [constr_1792] | Existence of DiagnosticDataIdentifier . dataElement | | [constr_1793] | Existence of attribute DiagnosticAbstractDataIdentifier . id | | [constr_1794] | Existence of attribute DiagnosticProtocol . priority | | [constr_1795] | Existence of attribute DiagnosticProtocol . protocolKind | | [constr_1796] | Existence of attribute DiagnosticServiceTable . serviceInstance | | [constr_1797] | Existence of attribute DiagnosticServiceTable . protocolKind | | [constr_1798] | Existence of DiagnosticServiceInstance . serviceClass | | [constr_1799] | Existence of DiagnosticEnvironmentalCondition . formula | | [constr_1800] | Existence of DiagnosticEnvConditionFormula . op | | [constr_1801] | Existence of DiagnosticEnvCompareCondition . compareType | | [constr_1802] | Existence of DiagnosticEnvDataCondition . compareValue | | [constr_1803] | Existence of DiagnosticEnvDataCondition . dataElement | | [constr_1804] | Existence of DiagnosticEnvModeCondition . modeElement | | [constr_1805] | Existence of DiagnosticEnvSwcModeElement . mode | | [constr_1806] | Existence of DiagnosticEnvBswModeElement . mode | | [constr_1807] | Existence of reference DiagnosticDataByIdentifier . dataIdentifier | | [constr_1808] | Existence of reference DiagnosticDynamicallyDefineDataIdentifier . dataIdentifier | | [constr_1810] | Existence of aggregation DiagnosticReadDataByPeriodicIDClass . period- icRate | | [constr_1811] | Existence of attribute DiagnosticReadDataByPeriodicIDClass . maxPeriod- icDidToRead | | [constr_1812] | Existence of attribute DiagnosticReadDataByPeriodicIDClass . scheduler- MaxNumber | | [constr_1813] | Existence of reference DiagnosticEventWindow . eventWindowTime | | [constr_1814] | Existence of reference DiagnosticEventWindow . storageStateEvaluation | | [constr_1815] | Existence of attribute DiagnosticRoutine . id | | [constr_1816] | Existence of attribute DiagnosticSecurityAccess . requestSeedId | | [constr_1817] | Existence of attribute DiagnosticSecurityAccess . securityLevel | | [constr_1818] | Existence of reference DiagnosticSessionControl . diagnosticSession | | Number | Heading | | [constr_1819] | Existence of attribute DiagnosticParameterIdentifier . id | | [constr_1820] | Existence of reference DiagnosticRequestCurrentPowertrainData . pid | | [constr_1821] | Existence of reference DiagnosticRequestPowertrainFreezeFrameData . freezeFrame | | [constr_1822] | Existence of reference DiagnosticRequestControlOfOnBoardDevice . testId | | [constr_1823] | Existence of attribute DiagnosticTestRoutineIdentifier . id | | [constr_1824] | Existence of attribute DiagnosticTestRoutineIdentifier . requestData- Size | | [constr_1825] | Existence of attribute DiagnosticTestRoutineIdentifier . responseData- Size | | [constr_1826] | Existence of reference DiagnosticRequestVehicleInfo . infoType | | [constr_1827] | Existence of attribute DiagnosticInfoType . id | | [constr_1828] | Existence of referenced from DiagnosticServiceDataMapping | | [constr_1829] | Existence of reference DiagnosticConnectedIndicator . indicator | | [constr_1830] | Existence of DiagnosticTroubleCodeGroup . groupNumber | | [constr_1831] | Existence of DiagnosticTroubleCodeProps . priority | | [constr_1832] | Existence of DiagnosticExtendedDataRecord . recordNumber | | [constr_1833] | Existence of DiagnosticFreezeFrame . trigger | | [constr_1834] | Existence of DiagnosticCondition . initValue | | [constr_1835] | Existence of DiagEventDebounceCounterBased . counterDecrementStep- Size | | [constr_1836] | Existence of DiagEventDebounceCounterBased . counterIncrementStep- Size | | [constr_1837] | Existence of DiagEventDebounceCounterBased . counterFailedThreshold | | [constr_1838] | Existence of DiagEventDebounceCounterBased . counterPassedThreshold | | [constr_1839] | Existence of attribute DiagEventDebounceTimeBased . timeFailedThreshold | | [constr_1840] | Existence of attribute DiagEventDebounceTimeBased . timePassedThreshold | | [constr_1841] | Existence of DiagnosticEnableConditionGroup . enableCondition | | [constr_1842] | Existence of DiagnosticStorageConditionGroup . storageCondition | | [constr_1843] | Existence of reference DiagnosticEventPortMapping . diagnosticEvent | | [constr_1844] | Existence of reference DiagnosticOperationCyclePortMapping . opera- tionCycle | | [constr_1845] | Existence of reference DiagnosticEnableConditionPortMapping . enable- Condition | | [constr_1846] | Existence of reference DiagnosticStorageConditionPortMapping . diag- nosticStorageCondition | | [constr_1847] | Existence of reference DiagnosticDemProvidedDataMapping . dataElement | | [constr_1848] | Existence of attribute DiagnosticAging . agingCycle | | [constr_1849] | Existence of attribute DiagnosticAging . threshold | | [constr_1850] | Existence of aggregation DiagnosticTestResult . testIdentifier | | [constr_1851] | Existence of reference DiagnosticTestResult . monitoredIdentifier |

| Number | Heading |

| [constr_1852] | Existence of attribute DiagnosticEcuInstanceProps . obdSupport | | [constr_1853] | Existence of attribute DiagnosticIumprGroup . iumprGroupIdentifier | | [constr_1854] | Existence of attribute DiagnosticIumprGroupIdentifier . groupId | | [constr_1855] | Existence of attribute DiagnosticFunctionIdentifierInhibit . inhibi- tionMask | | [constr_1856] | Existence of attribute DiagnosticJ1939Spn . spn | | [constr_1857] | Existence of the reference DiagnosticEventToTroubleCodeJ1939Mapping . diagnosticEvent | | [constr_1858] | Existence of the attribute DiagnosticEventToTroubleCodeJ1939Mapping . troubleCodeJ1939 | | [constr_1859] | Usage of DiagnosticRecordTriggerEnum . testFailedThisOperationCy- cle | | [constr_10024] | Existence of reference in the role DiagnosticSecurityEventReporting- ModeMapping . dataElement | | [constr_10025] | Existence of reference in the role DiagnosticSecurityEventReporting- ModeMapping . securityEvent | | [constr_10026] | Existence of reference in the role DiagnosticEventToSecurityEventMapping . diagnosticEvent | | [constr_10027] | Existence of reference in the role DiagnosticEventToSecurityEventMapping . securityEventProps |

E.7.5. R20-11 中变更的约束

无

E.7.6. R20-11 中删除的约束

| Number | Heading |

| [constr_1360] | Usage of DiagEventDebounceMonitorInternal is not supported in the context of DiagnosticDebounceAlgorithmProps |

E.8. 本文档 R21-11 版本的可追溯项变更历史

E.8.1. R21-11 中新增的规范项

| Number | Heading |

| [TPS_DEXT_01154] | Semantics of meta-class DiagnosticAuthRole | | [TPS_DEXT_01155] | Semantics of DiagnosticMemoryDestinationUserDefined . authenticationRole | | [TPS_DEXT_01156] | Further definition of the semantics of DiagnosticIumpr | | [TPS_DEXT_01157] | Semantics of DiagnosticIumprToFunctionIdentifierMapping | | [TPS_DEXT_01158] | Sub-Functions for diagnostic service Authentication | | [TPS_DEXT_01159] | Supported authentication methods for diagnostic service Authentication | | [TPS_DEXT_01160] | Semantics of the reference DiagnosticMapping . providerSoftwareCluster | | [TPS_DEXT_01161] | Mapping between a DiagnosticEvent and a CpSoftwareClusterResource | | [TPS_DEXT_01162] | Mapping between a DiagnosticDataElement and a CpSoftwareClusterResource | | [TPS_DEXT_01163] | Mapping between a DiagnosticRoutineSubfunction and a CpSoftwareClusterResource | | [TPS_DEXT_01164] | Mapping between a DiagnosticFunctionIdentifier and a CpSoftwareClusterResource |

E.8.2. R21-11 中变更的规范项

| Number | Heading |

| [TPS_DEXT_01045] | Supported diagnostic services | | [TPS_DEXT_01060] | Applicable values for DiagnosticReadDTCInformation . category | | [TPS_DEXT_01070] | Description of textually semi-formal formulated pre- and run-conditions for the validity of DiagnosticAccessPermission | | [TPS_DEXT_01091] | Relation between a DiagnosticServiceTable and one or more DiagnosticConnection s | | [TPS_DEXT_01093] | Definition of legislative freeze frame for WWWH-OBD | | [TPS_DEXT_01111] | Legislative freeze frame for the OBD-II case | | [TPS_DEXT_01112] | Definition of a diagnostic trouble code for the implementation of WWH-OBD | | [TPS_DEXT_01142] | Standardized values for DiagnosticDemProvidedDataMapping . dataProvider | | [TPS_DEXT_03012] | Three kinds of DTCs |

E.8.3. R21-11 中删除的规范项

| Number | Heading |

| [TPS_DEXT_01033] | Semantics of triggers in the context of a DiagnosticResponseOnEvent | | [TPS_DEXT_01049] | Consistency of DiagnosticServiceSwMapping with respect to routine IDs | | [TPS_DEXT_01050] | Consistency of DiagnosticServiceSwMapping with respect to data IDs | | [TPS_DEXT_01051] | Consistency of DiagnosticServiceSwMapping with respect to data IDs | | [TPS_DEXT_01054] | Existence of DiagnosticDataByIdentifier . dataIdentifier |

E.8.4. R21-11 中新增的约束

| Number | Heading |

| [constr_10038] | Restriction for the usage of DiagnosticAccessPermission . authenticationRole | | [constr_10042] | Existence of attribute DiagnosticCommonProps . defaultEndianness | | [constr_10043] | Existence of attribute DiagnosticCommonProps . resetConfirmedBitOnOverflow | | [constr_10044] | Existence of attribute DiagnosticCommonProps . occurrenceCounterProcessing | | [constr_10045] | Existence of attribute DiagnosticSecurityAccessClass . securityDelayTimeOnBoot | | [constr_10084] | Existence of DiagnosticIumprToFunctionIdentifierMapping . iumpr | | [constr_10085] | Existence of DiagnosticIumprToFunctionIdentifierMapping . functionIdentifier | | [constr_10088] | Relation between event and DTC without event combination | | [constr_10089] | Existence of attribute DiagnosticCommonProps . eventCombinationReportingBehavior | | [constr_10091] | Mandatory subfunction of diagnostic service Authentication |

E.8.5. R21-11 中变更的约束

| Number | Heading |

| [constr_1349] | Value of udsDtcValue shall be unique | | [constr_1457] | Service-only DTCs shall refer to a common memory section | | [constr_1458] | Reference to DiagnosticMemoryDestination |

| Number | Heading |

| [constr_1459] | Existence of attributes of DiagnosticTroubleCodeProps | | [constr_1509] | extendedDataRecord . recordNumber shall be unique within primary fault memory | | [constr_1511] | extendedDataRecord . recordNumber shall be unique within user-defined fault memory | | [constr_1512] | freezeFrame . recordNumber shall be unique within primary fault memory | | [constr_1514] | freezeFrame . recordNumber shall be unique within user-defined fault memory |

E.8.6. R21-11 中删除的约束

| Number | Heading |

| [constr_1365] | Multiplicity of DiagnosticResponseOnEvent . event | | [constr_1366] | Event ID in the context of diagnostic service ResponseOnEvent shall be unique | | [constr_1376] | Multiplicity of reference DiagnosticTroubleCodeProps . memoryDestination | | [constr_1377] | Existence of reference DiagnosticTroubleCodeProps . memoryDestination | | [constr_1380] | Existence of DiagnosticMemoryDestinationMirror | | [constr_1510] | extendedDataRecord . recordNumber shall be unique within mirror fault memory | | [constr_1513] | freezeFrame . recordNumber shall be unique within mirror fault memory | | [constr_1633] | Existence of DiagnosticResponseOnEvent . event vs. DiagnosticResponseOnEvent . responseOnEventAction | | [constr_1711] | Restriction of applicability of attribute typeOfFreezeFrameRecordNumeration | | [constr_1725] | Applicability of attribute DiagnosticMemoryDestination . dtcStatusAvailabilityMask | | [constr_1813] | Existence of reference DiagnosticEventWindow . eventWindowTime | | [constr_1814] | Existence of reference DiagnosticEventWindow . storageStateEvaluation |

E.9. 本文档 R22-11 版本的可追溯项变更历史

E.9.1. R22-11 中新增的规范项

| Number | Heading |

| [TPS_DEXT_01165] | Semantics of DiagnosticEnvDataElementCondition | | [TPS_DEXT_01166] | Usage of DiagnosticEnvDataElementCondition in top-down and bottom-up scenarios | | [TPS_DEXT_01167] | Relevance of CompuMethod and DataConstr for the definition of DiagnosticEnvDataElementCondition | | [TPS_DEXT_01168] | Allowed values of compareType in the context of a DiagnosticEnvDataCondition | | [TPS_DEXT_01169] | Role of meta-class DiagnosticParameter | | [TPS_DEXT_01170] | Semantics of meta-class DiagnosticAbstractParameter | | [TPS_DEXT_01171] | Size of a DiagnosticAbstractParameter | | [TPS_DEXT_01172] | Semantics of attribute DiagnosticAbstractParameter . parameterSize | | [TPS_DEXT_01173] | Start position of a DiagnosticAbstractParameter | | [TPS_DEXT_01174] | Content of a DiagnosticParameter | | [TPS_DEXT_01175] | Nested definition of a DiagnosticParameter | | [TPS_DEXT_01176] | DiagnosticParameter as a reference target | | [TPS_DEXT_01177] | Utility of DiagnosticServiceMappingDiagTarget | | [TPS_DEXT_01178] | Semantics of DiagnosticServiceDataMapping . parameterElementAccess | | [TPS_DEXT_01179] | Existence of reference to DiagnosticParameterIdent in the role diagnosticParameter | | [TPS_DEXT_01180] | Existence of reference to DiagnosticParameterElement in the role diagnosticParameter | | [TPS_DEXT_01181] | Existence of references to subclasses of DiagnosticServiceMappingDiagTarget | | [TPS_DEXT_01182] | Use case for the existence of reference DiagnosticServiceSwMapping . accessedDataPrototype |

E.9.2. R22-11 中变更的规范项

| Number | Heading |

| [TPS_DEXT_01139] | Semantics of the references from DiagnosticAccessPermission | | [TPS_DEXT_01149] | Standardized values of DiagnosticIumprDenominatorGroup . category | | [TPS_DEXT_03012] | Three kinds of DTCs |

E.9.3. R22-11 中删除的规范项

| Number | Heading |

| [TPS_DEXT_01155] | Semantics of DiagnosticMemoryDestinationUserDefined . authenticationRole |

E.9.4. R22-11 中新增的约束

| Number | Heading |

| [constr_10100] | Existence of DiagnosticRoutineControl . routine | | [constr_10115] | Existence of attributes of DiagnosticEnvDataElementCondition if the reference in the role dataPrototype exists | | [constr_10116] | Existence of attributes of DiagnosticEnvDataElementCondition if the reference in the role dataPrototype does not exist | | [constr_10117] | Existence of attributes of DiagnosticEnvDataElementCondition . swDataDefProps | | [constr_10122] | Existence of attribute DiagnosticComControlSubNodeChannel . subNodeChannel | | [constr_10364] | Usage of DiagnosticRecordTriggerEnum . testPassed | | [constr_10368] | Restriction regarding the reference DiagnosticDataIdentifierSet . dataIdentifier | | [constr_10369] | Existence of attributes of DiagnosticParameterElement depending on the value of attribute category | | [constr_10370] | Restriction regarding the role DiagnosticParameterIdentifier . dataElement | | [constr_10371] | Restriction regarding the aggregation of DiagnosticParameter in the role DiagnosticExtendedDataRecord . recordElement |

E.9.5. R22-11 中变更的约束

| Number | Heading |

| [constr_1470] | Value of DiagnosticAbstractParameter . bitOffset | | [constr_1624] | Existence of DiagnosticDataElement . scalingInfoSize | | [constr_1782] | Usage of internal data elements only for extended data records | | [constr_1790] | Existence of attribute DiagnosticAbstractParameter . bitOffset | | [constr_1791] | Existence of attribute dataElement vs. parameterSize of meta-class DiagnosticParameter | | [constr_1819] | Existence of attribute DiagnosticParameterIdentifier . id | | [constr_1820] | Existence of reference DiagnosticRequestCurrentPowertrainData . pid | | [constr_1821] | Existence of reference DiagnosticRequestPowertrainFreezeFrameData . freezeFrame | | [constr_1822] | Existence of reference DiagnosticRequestControlOfOnBoardDevice . testId | | [constr_1823] | Existence of attribute DiagnosticTestRoutineIdentifier . id | | [constr_1824] | Existence of attribute DiagnosticTestRoutineIdentifier . requestDataSize | | [constr_1825] | Existence of attribute DiagnosticTestRoutineIdentifier . responseDataSize | | [constr_1826] | Existence of reference DiagnosticRequestVehicleInfo . infoType | | [constr_1827] | Existence of attribute DiagnosticInfoType . id | | [constr_1828] | Existence of referenced from DiagnosticServiceDataMapping |

E.9.6. R22-11 中删除的约束

| Number | Heading |

| [constr_1344] | Condition for the identification of data types of attributes DiagnosticServiceDataMapping . mappedDataElement | | [constr_1465] | Allowed values of compareType in the context of a DiagnosticEnvDataCondition |

E.10. 本文档 R23-11 版本的可追溯项变更历史

E.10.1. R23-11 中新增的规范项

| Number | Heading |

| [TPS_DEXT_01183] | Existence of attributes of DiagnosticTroubleCodeProps | | [TPS_DEXT_01184] | Use cases for reading data from the application | | [TPS_DEXT_01185] | Use cases for writing data to the application | | [TPS_DEXT_01186] | Impact of the DiagnosticComControlClass on the state management for VLANs | | [TPS_DEXT_01187] | References from DiagnosticSecureCodingMapping to DiagnosticRoutine | | [TPS_DEXT_01188] | Attribute DiagnosticAccessPermission . authenticationEnabled does not exist | | [TPS_DEXT_01189] | Attribute DiagnosticAccessPermission . authenticationEnabled exists | | [TPS_DEXT_01190] | Attribute DiagnosticAccessPermission . authenticationEnabled exists, but DiagnosticAuthRoleProxy . authenticationRole does not exist | | [TPS_DEXT_01191] | Attribute DiagnosticAccessPermission . authenticationEnabled and DiagnosticAuthRoleProxy . authenticationRole exist | | [TPS_DEXT_01192] | Semantics of attribute DiagnosticAuthTransmitCertificateEvaluation . evaluationId | | [TPS_DEXT_01193] | Semantics of attribute DiagnosticAuthTransmitCertificateEvaluation . function | | [TPS_DEXT_01194] | Standardized value of attribute DiagnosticAuthTransmitCertificateEvaluation . function | | [TPS_DEXT_01195] | Semantics of the DiagnosticAuthTransmitCertificateMapping |

E.10.2. R23-11 中变更的规范项

| Number | Heading |

| [TPS_DEXT_01011] | Semantics of DiagnosticSession . id | | [TPS_DEXT_01045] | Supported diagnostic services in the scope of this document | | [TPS_DEXT_01139] | Semantics of the references from DiagnosticAccessPermission | | [TPS_DEXT_01142] | Standardized values for attribute DiagnosticDemProvidedDataMapping . dataProvider | | [TPS_DEXT_01149] | Standardized values of DiagnosticIumprDenominatorGroup . category |

E.10.3. R23-11 中删除的规范项

无

E.10.4. R23-11 中新增的约束

| Number | Heading |

| [constr_10412] | Existence of attribute DiagnosticTestIdentifier . id | | [constr_10413] | Existence of attribute DiagnosticTestIdentifier . uasId | | [constr_10414] | Existence of attribute DiagnosticMeasurementIdentifier . obdMid | | [constr_10418] | Existence of attribute DiagnosticDebounceAlgorithmProps . debounceAlgorithm | | [constr_10419] | Existence of the attribute DiagnosticCommonProps . resetPendingBitOnOverflow | | [constr_10421] | Existence of attribute DiagnosticMemoryDestination . dtcStatusAvailabilityMask | | [constr_10422] | Existence of attribute DiagnosticMemoryDestination . eventDisplacementStrategy | | [constr_10423] | Existence of attribute DiagnosticMemoryDestination . maxNumberOfEventEntries | | [constr_10440] | Restriction for the minimum value of attribute DiagnosticSessionControlClass . s3ServerTimeout |

E.10.5. R23-11 中变更的约束

| Number | Heading |

| [constr_1329] | Existence of concrete sub-classes of DiagnosticServiceClass in the context created by a DiagnosticContributionSet | | [constr_1333] | Existence of attributes of meta-class DiagnosticMemoryIdentifier | | [constr_1552] | Meta-class DiagnosticDataIdentifier referenced by DiagnosticDataIdentifierSet | | [constr_10038] | Restriction for the usage of DiagnosticAccessPermission . authenticationEnabled | | [constr_10371] | DiagnosticDataElement s owned by a DiagnosticExtendedDataRecord |

E.10.6. R23-11 中删除的约束

| Number | Heading |

| [constr_1459] | Existence of attributes of DiagnosticTroubleCodeProps |

E.10.7. R23-11 中新增的建议

无

E.10.8. R23-11 中变更的建议

无

E.10.9. R23-11 中删除的建议

无

F. InstanceRef 的建模

F.1. 简介

所谓 InstanceRef 的存在是 AUTOSAR 内使用类型-原型(type-prototype)模式建模的直接后果。引用一个原型时,还需要包含对由其相应类型定义类型的原型的引用,而这些类型又聚合更多的原型以建立上下文。

换言之,InstanceRef 表示结构化引用:一方面由对上下文原型的引用组成(由 atpContextElement 的子集化或重定义指示),最后是对适用目标原型的引用(由 atpTarget 的重定义指示)。

注意,在特定 InstanceRef 的建模中拥有多于一个上下文并不罕见。

这是依赖的源实现了到依赖目标处元类的 InstanceRef 的简化指示。同样,在大多数情况下,这就是读者理解建模所需的全部信息。

InstanceRef 的正式建模通过创建抽象元类 AtpInstanceRef 的子类完成。

在本文档特定章节的上下文中建议更详细了解建模的地方,AtpInstanceRef 特定子类的建模直接在相应章节的上下文中解释。

在所有其他情况下,通过阅读本章可以更深入地理解特定 AtpInstanceRef 子类的建模。

本章包含的类表未完全填写,因为类表内的大多数注记缺失。

这些类表的主要目的是提供关于 InstanceRef 在 M1 AUTOSAR 模型中序列化的预期顺序的信息。

特别是,关于序列化 M1 模型中顺序的信息可以从 InstanceRef 元类每个属性的标签 xml.sequenceOffset 的值获得。

关于 AtpInstanceRef 建模的一般概念(例如从 AtpInstanceRef 子类到其他元类的关联的重定义或子集化的概念背景)的更多信息请参见 [16]。

F.2. 建模

表F.1:DataPrototypeInSystemInstanceRef(DataPrototypeInSystemInstanceRef)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::InstanceRefs | | 说明 | | | 基类 | ARObject , AtpInstanceRef | | 聚合于 | DiagnosticEnvDataElementCondition.dataPrototype, DiagnosticServiceDataMapping.mappedData Element |

属性 类型 多重性 种类 备注
base System 0..1 ref This represents the base of the InstanceRef Stereotypes: atpDerived Tags: xml.sequenceOffset=10
context Component (ordered) SwComponent Prototype * ref Tags: xml.sequenceOffset=30
contextData Prototype (ordered) ApplicationComposite ElementDataPrototype * ref Tags: xml.sequenceOffset=50
contextPort PortPrototype 0..1 ref This represents the PortPrototype that is contained in the InstanceRef. Tags: xml.sequenceOffset=40
contextRoot Composition RootSwComposition Prototype 0..1 ref Tags: xml.sequenceOffset=20
rootData Prototype AutosarDataPrototype 0..1 ref Tags: xml.sequenceOffset=45
targetData Prototype DataPrototype 0..1 ref This represents the target of the InstanceRef Tags: xml.sequenceOffset=60

表F.2:SwcServiceDependencyInSystemInstanceRef(SwcServiceDependencyInSystemInstanceRef)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::InstanceRefs | | 说明 | | | 基类 | ARObject , AtpInstanceRef | | 聚合于 | DiagnosticEnableConditionPortMapping.swcServiceDependencyInSystem, DiagnosticEventPort Mapping.swcServiceDependencyInSystem, DiagnosticFimFunctionMapping.mappedSwcService Dependency, DiagnosticOperationCyclePortMapping.swcServiceDependencyInSystem, Diagnostic ServiceSwMapping.mappedSwcServiceDependencyInSystem, DiagnosticStorageConditionPort Mapping.swcServiceDependencyInSystem |

属性 类型 多重性 种类 备注
contextRootSw Composition RootSwComposition Prototype 0..1 ref
contextSw Component Prototype (ordered) SwComponent Prototype * ref
Class SwcServiceDependencyInSystemInstanceRef
targetSwc Service Dependency SwcService Dependency 0..1 ref

表F.3:PModeInSystemInstanceRef(PModeInSystemInstanceRef)

| 包 | M2::AUTOSARTemplates::DiagnosticExtract::InstanceRefs | | 说明 | | | 基类 | ARObject , AtpInstanceRef | | 聚合于 | DiagnosticEnvSwcModeElement.mode |

属性 类型 多重性 种类 备注
base System 0..1 ref Stereotypes: atpDerived Tags: xml.sequenceOffset=10
context Component (ordered) SwComponent Prototype * ref Tags: xml.sequenceOffset=30
context Composition RootSwComposition Prototype 0..1 ref Tags: xml.sequenceOffset=20
contextMode Declaration Group ModeDeclarationGroup Prototype 0..1 ref Tags: xml.sequenceOffset=50
contextPPort AbstractProvidedPort Prototype 0..1 ref Tags: xml.sequenceOffset=40
targetMode ModeDeclaration 0..1 ref Tags: xml.sequenceOffset=60

G. 上游映射

G.1. 简介

本章描述将 ECU 配置参数(M1 模型)映射到 AUTOSAR 上游模板(系统模板、SW 组件模板、诊断提取和 ECU 资源模板)的元类和属性的方法。

描述上游模板与 ECU 配置之间的关系,是为了回答如下典型问题:

  • 供应商应如何使用系统描述中的信息来满足系统工程师定义的需求?

  • 工具供应商应如何从系统描述的 ECU 提取生成 ECU 配置描述?

请注意,上游映射表包含以下列:

| Column Name | Column Meaning |

| BSW Module | Name of BSW module | | BSW Context | Reference to parameter container | | BSW Parameter | Name of the BSW parameter | | BSW Type | Type of parameter | | BSW Description | Description from the configuration document | | Template Description | Class note or attribute note of the M2 model element | | M2 Parameter | Name of the upstream template model element | | Mapping Rule | Textual description on how to transform between M2 and BSW domains | | Mapping Type | One of: local no mapping needed since parameter local to BSW partial some data can be automatically mapped but not all full all data can be automatically mapped | | Mapping Status | Indication of life-cycle status of the mapping | | ECUC Parameter ID | ID of the parameter in the respective SWS document (may be empty if the mapping is owned by an enumeration literal) |

G.2. Dcm

属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsd
BSW 参数 DcmDsdServiceTable
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 This container contains the configuration (DSD parameters) for a Service Identifier Table. Note: It is allowed to add OBD services to a DcmDsdServiceTable related to a UDS Protocol. But it is not allowed to add UDS services to a DcmDsdServiceTable related to an OBD Protocol.
模板描述 This meta-class represents a model of a diagnostic service table, i.e. the UDS services applicable for a given ECU.
M2 参数 DiagnosticExtract::DiagnosticContribution:: DiagnosticServiceTable
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00732]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsd/DcmDsdServiceTable/DcmDsdService
BSW 参数 DcmDsdServiceRoleRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Reference to DcmDspAuthenticationRow that defines a role in that the service is allowed to be executed.
模板描述 This attribute allows for the specification of the position of the enclosing role in a bitfield of roles.
M2 参数 DiagnosticExtract::Dcm::DiagnosticAuthRole. bitPosition
映射规则 Applicable if the current access permission maps to a service where only the service ID shall get a assigned role. The value of DcmDsdServiceRole is calculated based on the bits of all referenced DiagnosticAuthRole.bitPosition, where a value of 2ˆbitPosition is used for each DiagnosticAuth Role.bitPosition. The accumulated value represents a bitfield that has a bit set for each Diagnostic AuthRole.bitPosition.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01139]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsd/DcmDsdServiceTable/DcmDsdService
BSW 参数 DcmDsdSidTabSecurityLevelRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Reference to a Security Level in which the service is allowed to be executed. Multiple references are allowed for a service. Please refer to ISO 14229-1, ISO 15031-5 and chapter "Verification of the Service Security Access levels." If there is no reference configured, no service security verification shall be performed.
模板描述 This represents the associated DiagnosticSecurityLevels
M2 参数 DiagnosticExtract::Dcm::DiagnosticAccessPermission. securityLevel
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00733]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsd/DcmDsdServiceTable/DcmDsdService
BSW 参数 DcmDsdSidTabServiceId
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Identifier of the service. The possible service identifiers are defined in ISO 14229-1 and ISO 15031-5.
模板描述 This meta-class provides the ability to define common properties that are shared among all instances of sub-classes of DiagnosticServiceInstance.
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::CommonService:: DiagnosticServiceClass
映射规则 Service identifiers of the used DiagnosticServiceClass
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00735]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsd/DcmDsdServiceTable/DcmDsdService
BSW 参数 DcmDsdSidTabSessionLevelRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Reference to a Session Level in which the service is allowed to be executed. Multiple references are allowed for a service. Please refer to ISO 14229-1, ISO 15031-5 and chapter "Verification of the Diagnostic Session". If there is no reference configured, no diagnostic session verification shall be performed.
模板描述 This represents the associated DiagnosticSessions
M2 参数 DiagnosticExtract::Dcm::DiagnosticAccessPermission. diagnosticSession
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00734]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsd/DcmDsdServiceTable/DcmDsdService
BSW 参数 DcmDsdSidTabSubfuncAvail
BSW 类型 ECUC-BOOLEAN-PARAM-DEF
BSW 说明 Information about whether the service has subfunctions or not. This parameter is used for the handling of the "suppressPos RspMsgIndicationBit" as defined in ISO 14229-1, which can be used as a reference for the configuration. true - service has subfunctions, suppressPosRspMsgIndicationBit is available false - service has no subfunctions, suppressPosRspMsgIndicationBit is not available
模板描述 The category is a keyword that specializes the semantics of the Identifiable. It affects the expected existence of attributes and the applicability of constraints.
M2 参数 GenericStructure::GeneralTemplateClasses::Identifiable::Identifiable. category
映射规则 Stanadardized sub-functions of diagnostic services are mainly identified by the category. There are further specific attributes in the meta-model that allow for handling custom subfunctions,
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00737]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsd/DcmDsdServiceTable/DcmDsdService/DcmDsdSubService
BSW 参数 DcmDsdSubServiceFnc
BSW 类型 ECUC-FUNCTION-NAME-DEF
BSW 说明 Callback function of the ECU Supplier specific component for the particular service. The function's prototype is as described for . If this parameter is not configured, the subservice is handled Dcm-internally.
模板描述 This attribute shall be used to define a custom sub-function number if none of the standardized values of category shall be used.
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::CommunicationControl::DiagnosticComControl. customSubFunctionNumber
映射规则 The existence of a custom subfunction number shall trigger the creation of a custom processor.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00942]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsd/DcmDsdServiceTable/DcmDsdService/DcmDsdSubService
BSW 参数 DcmDsdSubServiceRoleRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Reference to DcmDspAuthenticationRow that defines a role in that the service with this subfunction is allowed to be executed.
模板描述 This attribute allows for the specification of the position of the enclosing role in a bitfield of roles.
M2 参数 DiagnosticExtract::Dcm::DiagnosticAuthRole. bitPosition
映射规则 Applicable if the current access permission maps to a service where the subfunction of service ID and shall get a assigned role. The value of DcmDsdSubServiceRoleis is calculated based on the bits of all referenced DiagnosticAuthRole.bitPosition, where avalue of 2ˆbitPosition is used for each DiagnosticAuthRole.bitPosition. The accumulated value represents a bitfield that has a bit set for each DiagnosticAuthRole.bitPosition.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01140]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsd/DcmDsdServiceTable/DcmDsdService/DcmDsdSubService
BSW 参数 DcmDsdSubServiceSecurityLevelRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Reference to a Security Level in which the subservice is allowed to be executed. Multiple references are allowed for a subservice. Please refer to ISO 14229-1, ISO 15031-5 and chapter "Verification of the Service Security Access levels." If there is no reference configured, no subservice security verification shall be performed.
模板描述 This represents the associated DiagnosticSecurityLevels
M2 参数 DiagnosticExtract::Dcm::DiagnosticAccessPermission. securityLevel
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00812]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsd/DcmDsdServiceTable/DcmDsdService/DcmDsdSubService
BSW 参数 DcmDsdSubServiceSessionLevelRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Reference to a Session Level in which the subservice is allowed to be executed. Multiple references are allowed for a subservice. Please refer to ISO 14229-1, ISO 15031-5 and chapter "Verification of the Diagnostic Session". If there is no reference configured, no diagnostic session verification shall be performed.
模板描述 This represents the associated DiagnosticSessions
M2 参数 DiagnosticExtract::Dcm::DiagnosticAccessPermission. diagnosticSession
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00804]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsl/DcmDslDiagResp
BSW 参数 DcmDslDiagRespMaxNumRespPend
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Maximum number of negative responses with response code 0x78 (requestCorrectlyReceivedResponsePending) allowed for a request. If Dcm reaches this limit, an automatic 0x10 (generalReject) final response will be trasmitted and the service processing will be cancelled. Value 0x00 means that no NRC 0x78 response will be transmitted.
模板描述 Maximum number of negative responses with response code 0x78 (requestCorrectlyReceived-ResponsePending) allowed per request. DCM will send a negative response with response code 0x10 (generalReject), in case the limit value gets reached. Value 0xFF means that no limit number of NRC 0x78 response apply.
M2 参数 DiagnosticExtract::DiagnosticCommonProps::DiagnosticCommonProps. maxNumberOfRequestCorrectlyReceivedResponsePending
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00693]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsl/DcmDslDiagResp
BSW 参数 DcmDslDiagRespOnSecondDeclinedRequest
BSW 类型 ECUC-BOOLEAN-PARAM-DEF
BSW 说明 Defines the reaction upon a second request (ClientB) that can not be processed (e.g. due to priority assessment). TRUE: when the second request (Client B) can not be processed, it shall be answered with NRC21 BusyRepeatRequest. FALSE: when the second request (Client B) can not be processed, it shall not be responded.
模板描述 Defines the reaction upon a second request (ClientB) that can not be processed (e.g. due to priority assessment). TRUE: when the second request (Client B) can not be processed, it shall be answered with NRC21 BusyRepeatRequest. FALSE: when the second request (Client B) can not be processed, it shall not be responded.
M2 参数 DiagnosticExtract::DiagnosticCommonProps::DiagnosticCommonProps. responseOnSecondDeclinedRequest
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00914]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsl/DcmDslProtocol
BSW 参数 DcmDslProtocolRow
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 This container contains the configuration of one particular diagnostic protocol used in Dcm.
模板描述 This meta-class represents the ability to define a diagnostic protocol.
M2 参数 DiagnosticExtract::DiagnosticContribution:: DiagnosticProtocol
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00695]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsl/DcmDslProtocol/DcmDslProtocolRow/DcmDslConnection/DcmDsl MainConnection
BSW 参数 DcmDslProtocolComMChannelRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Reference to the ComMChannel on which the DcmDslProtocolRxPdu is received and the DcmDslProtocolTxPdu is transmitted.
模板描述 The CommunicationCluster is the main element to describe the topological connection of communicating ECUs. A cluster describes the ensemble of ECUs, which are linked by a communication medium of arbitrary topology (bus, star, ring, ...). The nodes within the cluster share the same communication protocol, which may be event-triggered, time-triggered or a combination of both. A CommunicationCluster aggregates one or more physical channels.
M2 参数 SystemTemplate::Fibex::FibexCore::CoreTopology:: CommunicationCluster
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00952]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsl/DcmDslProtocol/DcmDslProtocolRow/DcmDslConnection/DcmDsl MainConnection/DcmDslProtocolRx/DcmDslProtocolRxAddrType
BSW 参数 DCM_FUNCTIONAL_TYPE
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 FUNCTIONAL = 1 to n communication
模板描述 Reference to functional request messages.
M2 参数 SystemTemplate::DiagnosticConnection::DiagnosticConnection. functionalRequest
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsl/DcmDslProtocol/DcmDslProtocolRow/DcmDslConnection/DcmDsl MainConnection/DcmDslProtocolRx/DcmDslProtocolRxAddrType
BSW 参数 DCM_PHYSICAL_TYPE
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 PHYSICAL = 1 to 1 communications using physical addressing
模板描述 Reference to a physical request message.
M2 参数 SystemTemplate::DiagnosticConnection::DiagnosticConnection. physicalRequest
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsl/DcmDslProtocol/DcmDslProtocolRow/DcmDslConnection/DcmDsl MainConnection/DcmDslProtocolRx
BSW 参数 DcmDslProtocolRxPduRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Reference to a Pdu in EcuC that is used for this reception channel.
模板描述 The IPdu (Interaction Layer Protocol Data Unit) element is used to sum up all Pdus that are routed by the PduR.
M2 参数 SystemTemplate::Fibex::FibexCore::CoreCommunication:: IPdu
映射规则 Reference to IPdu of xxxTpConnection for DiagnosticConnection.physicalRequest / Diagnostic Connection.functionalRequest
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00770]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsl/DcmDslProtocol/DcmDslProtocolRow/DcmDslConnection/DcmDsl MainConnection
BSW 参数 DcmDslProtocolTx
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 This container contains the configuration parameters of a transmission channel in a diagnostic connection. The PDU referenced by this transmission channel can produce meta data items of type TARGET_ADDRESS_16 and SOURCE_ADDRESS_16.
模板描述 In the vast majority of cases a response is required. However, there are also cases where providing the response is not possible and/or not allowed.
M2 参数 SystemTemplate::DiagnosticConnection::DiagnosticConnection. response
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00711]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsl/DcmDslProtocol/DcmDslProtocolRow/DcmDslConnection/DcmDsl MainConnection/DcmDslProtocolTx
BSW 参数 DcmDslProtocolTxPduRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Reference to a Pdu in EcuC that is used for this transmission channel.
模板描述 The IPdu (Interaction Layer Protocol Data Unit) element is used to sum up all Pdus that are routed by the PduR.
M2 参数 SystemTemplate::Fibex::FibexCore::CoreCommunication:: IPdu
映射规则 Reference to IPdu of xxxTpConnection for DiagnosticConnection.response
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00772]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsl/DcmDslProtocol/DcmDslProtocolRow/DcmDslConnection/DcmDsl PeriodicTransmission/DcmDslPeriodicConnection BSW Parameter Type BSW DcmDslPeriodicTxPduRef ECUC-REFERENCE-DEF
BSW 说明 Reference to a Pdu in EcuC that is used for this periodic transmission channel.
模板描述 The IPdu (Interaction Layer Protocol Data Unit) element is used to sum up all Pdus that are routed by the PduR.
M2 参数 SystemTemplate::Fibex::FibexCore::CoreCommunication:: IPdu
映射规则 Reference to IPdu of xxxTpConnection in case of DiagnosticConnection.periodicResponseTp or IPdu of PduTriggering in case of DiagnosticConnection.periodicResponseUudt
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00742]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsl/DcmDslProtocol/DcmDslProtocolRow
BSW 参数 DcmDslProtocolPriority
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Protocol priority used during protocol preemption. A higher priority protocol may preempt a lower priority protocol. Lower numeric values represent higher protocol priority: 0 - Highest protocol priority 255 - Lowest protocol priority
模板描述 This represents the priority of the diagnostic protocol in comparison to other diagnostic protocols. Lower numeric values represent higher protocol priority: • 255 - Lowest protocol priority M2 Parameter DiagnosticExtract::DiagnosticContribution::DiagnosticProtocol. priority
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00699]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsl/DcmDslProtocol/DcmDslProtocolRow/DcmDslProtocolTransType
BSW 参数 TYPE1
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Messages on the DcmTxPduId already used for normal diagnostic responses. The outgoing messages must be synchronized with 'normal outgoing messages', which have a higher priority.
模板描述 Reference to a ROE message.
M2 参数 SystemTemplate::DiagnosticConnection::DiagnosticConnection. responseOnEvent
映射规则 TYPE1 : periodicResponseTp / responseOnEvent using same reference as the normal response
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsl/DcmDslProtocol/DcmDslProtocolRow/DcmDslProtocolTransType
BSW 参数 TYPE2
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Messages on a separate DcmTxPduId.
模板描述 Reference to a ROE message.
M2 参数 SystemTemplate::DiagnosticConnection::DiagnosticConnection. responseOnEvent
映射规则 TYPE2: periodicResponseTp / responseOnEvent using other reference as the normal response
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsl/DcmDslProtocol/DcmDslProtocolRow/DcmDslProtocolType
BSW 参数 DCM_PERIODICTRANS_ON_CAN
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 AbstractCanPhysicalChannel: Abstract class that is used to collect the common TtCAN and CAN PhysicalChannel attributes. DiagnosticConnection.periodicResponseUudt: Reference to UUDT responses.
模板描述 SystemTemplate::Fibex::Fibex4Can::CanTopology:: AbstractCanPhysicalChannel , SystemTemplate::Diagnostic Connection::DiagnosticConnection. periodicResponseUudt
M2 参数 If DiagnosticConnection.periodicResponseUudt exists and PhysicalChannel given as AbstractCan PhysicalChannel.
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsl/DcmDslProtocol/DcmDslProtocolRow/DcmDslProtocolType
BSW 参数 DCM_PERIODICTRANS_ON_IP
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Template Description StaticSocketConnection: Definition of static SocketConnection between the Socket that is defined by the aggregating SocketAddress and the remote Address. DiagnosticConnection.periodicResponseUudt: Reference to UUDT responses. EthernetPhysicalChannel: The EthernetPhysicalChannel represents a VLAN or an untagged channel. An untagged channel is modeled as an Ethernet PhysicalChannel without an aggregated VLAN. M2 Parameter SystemTemplate::Fibex::Fibex4Ethernet::ServiceInstances:: StaticSocketConnection , SystemTemplate::Diagnostic Connection::DiagnosticConnection. periodicResponseUudt , SystemTemplate::Fibex::Fibex4Ethernet::EthernetTopology:: EthernetPhysicalChannel If DiagnosticConnection.periodicResponseUudt exists and PhysicalChannel given as Ethernet PhysicalChannel.
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsl/DcmDslProtocol/DcmDslProtocolRow/DcmDslProtocolType
BSW 参数 DCM_ROE_ON_CAN
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF BSW Description Template Description DiagnosticConnection.responseOnEvent: Reference to a ROE message. CanTpConnection: A connection identifies the sender and the receiver of this particular communication. The CanTp module routes a Pdu through this connection. atpVariation: Derived, because TpNode can vary. M2 Parameter SystemTemplate::DiagnosticConnection::DiagnosticConnection. responseOnEvent , SystemTemplate::TransportProtocols:: CanTpConnection Mapping Rule In case DiagnosticConnection.responseOnEvent exists and TpConnectionIdent.ident belongs to a CanTpConnection. Mapping Status valid
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsl/DcmDslProtocol/DcmDslProtocolRow/DcmDslProtocolType
BSW 参数 DCM_ROE_ON_FLEXRAY
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
模板描述 DiagnosticConnection.responseOnEvent: Reference to a ROE message. FlexrayTpConnection: A connection identifies the sender and the receiver of this particular communication. The FlexRayTp module routes a Pdu through this connection. In a System Description the references to the PduPools are mandatory. In an ECU Extract these references can be optional: On unicast connections these references are always mandatory. On multicast the txPduPool is mandatory on the sender side. The rxPduPool is mandatory on the receiver side. On Gateway ECUs both references are mandatory. M2 Parameter SystemTemplate::DiagnosticConnection::DiagnosticConnection. responseOnEvent , SystemTemplate::TransportProtocols:: FlexrayTpConnection full
BSW 说明 In case DiagnosticConnection.responseOnEvent exists and TpConnectionIdent.ident belongs to FlexRayTpConnection
映射规则 valid
映射类型 —
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsl/DcmDslProtocol/DcmDslProtocolRow/DcmDslProtocolType
BSW 参数 DCM_ROE_ON_IP
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
模板描述 Mapping Type full ECUC Parameter ID SystemTemplate::DiagnosticConnection::DiagnosticConnection. responseOnEvent , System Template::Fibex::Fibex4Ethernet::ServiceInstances:: StaticSocketConnection
BSW 说明 DiagnosticConnection.responseOnEvent: Reference to a ROE message. StaticSocketConnection: Definition of static SocketConnection between the Socket that is defined by the aggregating SocketAddress and the remote
M2 参数 In case DiagnosticConnection.responseOnEvent exists and TpConnectionIdent.ident belongs to SocketConnection
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsl/DcmDslProtocol/DcmDslProtocolRow/DcmDslProtocolType
BSW 参数 DCM_UDS_ON_CAN
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 UDS on CAN (ISO15765-3; ISO14229-1)
模板描述 DiagnosticConnection.physicalRequest: Reference to a physical request message. CanTpConnection: A connection identifies the sender and the receiver of this particular communication. The CanTp module routes a Pdu through this connection. atpVariation: Derived, because TpNode can vary. M2 Parameter SystemTemplate::DiagnosticConnection::DiagnosticConnection. physicalRequest , SystemTemplate::TransportProtocols:: CanTpConnection In case DiagnosticConnection.physicalRequest exists and TpConnectionIdent.ident belongs to CanTpConnection
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsl/DcmDslProtocol/DcmDslProtocolRow/DcmDslProtocolType
BSW 参数 DCM_UDS_ON_FLEXRAY
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 UDS on FlexRay (Manufacturer specific; ISO14229-1)
模板描述 DiagnosticConnection.physicalRequest: Reference to a physical request message. FlexrayTpConnection: A connection identifies the sender and the receiver of this particular communication. The FlexRayTp module routes a Pdu through this connection. In a System Description the references to the PduPools are mandatory. In an ECU Extract these references can be optional: On unicast connections these references are always mandatory. On multicast the txPduPool is mandatory on the sender side. The rxPduPool is mandatory on the receiver side. On Gateway ECUs both references are mandatory. M2 Parameter SystemTemplate::DiagnosticConnection::DiagnosticConnection. physicalRequest , SystemTemplate::TransportProtocols:: FlexrayTpConnection In case DiagnosticConnection.physicalRequest exists and TpConnectionIdent.ident belongs to FlexRayTpConnection
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsl/DcmDslProtocol/DcmDslProtocolRow/DcmDslProtocolType
BSW 参数 DCM_UDS_ON_IP
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Template Description DiagnosticConnection.physicalRequest: Reference to a physical request message. StaticSocketConnection: Definition of static SocketConnection between the Socket that is defined by the aggregating SocketAddress and the remote Address. M2 Parameter SystemTemplate::DiagnosticConnection::DiagnosticConnection. physicalRequest , System Template::Fibex::Fibex4Ethernet::ServiceInstances:: StaticSocketConnection
映射规则 In case DiagnosticConnection.physicalRequest exists and TpConnectionIdent.ident belongs to a SocketConnection
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspAuthentication
BSW 参数 DcmDspAuthenticationDeauthenticatedRoleRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Reference to DcmDspAuthenticationRow that defines a role in that is used as deauthenticated role.
模板描述 This attribute allows for the specification of the position of the enclosing role in a bitfield of roles.
M2 参数 DiagnosticExtract::Dcm::DiagnosticAuthRole. bitPosition
映射规则 The value of each DcmDspAuthenticationDeauthenticatedRole is calculated based on the bits of all referenced DiagnosticAuthRole.bitPosition with DiagnosticAuthRole.isDefault = true, where a value of 2ˆbitPosition is used for each DiagnosticAuthRole.bitPosition. The accumulated value represents a bitfield that has a bit set for each DiagnosticAuthRole.bitPosition.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01153]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspAuthentication
BSW 参数 DcmDspAuthenticationDefaultSessionTimeOut
BSW 类型 ECUC-FLOAT-PARAM-DEF
BSW 说明 Defines the number of seconds after which the Dcm makes a transition to deauthenticated state, in case of no active communication.
模板描述 This attribute defines the time (in seconds) that the authentication state is maintained in default-session if there is no communication from the authenticated client.
M2 参数 DiagnosticExtract::DiagnosticCommonProps::DiagnosticCommonProps. authenticationTimeout
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01161]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspAuthentication/DcmDspAuthenticationTransmitCertificate
BSW 参数 DcmDspAuthenticationTransmitCertificateEvaluationId
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Certificate evaluation id.
模板描述 This attributes represents the ID of the certificate evaluation.
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::Authentication::DiagnosticAuthTransmitCertificateEvaluation. evaluationId
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01242]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspAuthentication/DcmDspAuthenticationTransmitCertificate
BSW 参数 DcmDspAuthenticationTransmitCertificateFunction
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 Provides a fixed semantics to this certificate that will lead to predefined actions in the Dcm.
模板描述 This meta-class represents the ability to configure a certificate evaluation in the context of a diagnostic authentication.
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::Authentication:: DiagnosticAuthTransmitCertificateEvaluation
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01244]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspAuthentication/DcmDspAuthenticationTransmitCertificate
BSW 参数 DcmDspAuthenticationTransmitCertificateRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Reference to a KeyMCertificate used to handle the certificate.
模板描述 This reference identifies the description of the applicable crypto certificate.
M2 参数 DiagnosticExtract::DiagnosticMapping::DiagnosticAuthTransmitCertificateMapping. cryptoServiceCertificate
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01243]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspComControl
BSW 参数 DcmDspComControlAllChannel
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 Collection of ComM channels which shall be controlled if all networks are addressed.
模板描述 DiagnosticComControlClass.allChannels: This reference represents the semantics that all available channels shall be affected. It is still necessary to refer to individual CommunicatuionClusters because there could be private CommunicationClusters in the System Extract that are not subject to the service "communication control". By referring to the applicable CommunicationClusters it can be made sure that only the affected CommunicationClusters are accessed. DiagnosticComControlClass.allPhysicalChannels: This reference represents the semantics that all available channels shall be affected. It is still necessary to refer to individual EthernetPhysicalChannels because there could be private VLANs (and thus private EthernetPhysicalChannels) in the System Extract that are not subject to the service "communication control". By referring to the applicable EthernetPhysicalChannels it can be made sure that only the affected EthernetPhysicalChannels are accessed. M2 Parameter DiagnosticExtract::Dcm::DiagnosticService::CommunicationControl::DiagnosticComControlClass. allChannels , Diagnostic Extract::Dcm::DiagnosticService::CommunicationControl::DiagnosticComControlClass. allPhysicalChannels Mapping Rule For all bus systems, except Ethernet: Create one DcmDspComControlAllChannel for each DiagnosticComControl.allChannels. Add reference DcmDspAllComControlChannelRef and let it refer to the ComMChannel that represents the respective CommunicationCluster that is referenced in the role DiagnosticComControlClass.all Channels. For Ethernet Bus Systems: Create one DcmDspComControlAllChannel for each element of DiagnosticComControlClass.all PhysicalChannels. Add reference DcmDspAllComControlChannelRef and let it refer to the Com MChannel that represents the respective PhysicalChannel that is referenced in the role Diagnostic full ComControlClass.allPhysicalChannels.
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00901]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspComControl
BSW 参数 DcmDspComControlSpecificChannel
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 Template Description DiagnosticComControlClass.specificChannel: This represents the ability to add additional attributes to the case that only specific channels are supposed to be considered, DiagnosticComControlSpecificChannel.specificPhysicalChannel: This represents the affected specific EthernetPhysicalChannel. M2 Parameter DiagnosticExtract::Dcm::DiagnosticService::CommunicationControl::DiagnosticComControlClass. specificChannel , DiagnosticExtract::Dcm::DiagnosticService::CommunicationControl::DiagnosticComControlSpecificChannel. specificPhysicalChannel For all bus systems, except Ethernet: Create one DcmDspComControlSpecificChannel for each DiagnosticComControlSpecific Channel.specificChannel. Add reference DcmDspSpecificComControlChannelRef and let it refer to the ComMChannel that represents the respective CommunicationCluster that is referenced in the role DiagnosticComControlClass.specificChannel. For Ethernet Bus Systems: Create one DcmDspComControlSpecificChannel for each DiagnosticComControlSpecific Channel.specificPhysicalChannel. Add reference DcmDspSpecificComControlChannelRef and let it refer to the ComMChannel that represents the respective PhysicalChannel that is referenced in the role DiagnosticComControlSpecificChannel.specificPhysicalChannel.
映射规则 full
映射类型 valid
映射状态 [ECUC_Dcm_00903]
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspComControl/DcmDspComControlSpecificChannel
BSW 参数 DcmDspSubnetNumber
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Subnet Number which controls the specific ComMChannel.
模板描述 This represents the applicable subnet number (which is an arbitrary number ranging from 1..14)
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::CommunicationControl::DiagnosticComControlSpecificChannel. subnetNumber
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00905]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspComControl
BSW 参数 DcmDspComControlSubNode
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 This container gives information about the node identification number and the ComM channel used to address a sub-network.
模板描述 DiagnosticComControlSubNodeChannel.subNodeChannel: This represents the affected CommunicationCluster in the role subNodeChannel DiagnosticComControlSubNodeChannel.subNodePhysicalChannel: This represents the affected sub-node EthernetPhysicalChannel.
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::CommunicationControl::DiagnosticComControlSubNodeChannel. subNodeChannel , DiagnosticExtract::Dcm::DiagnosticService::CommunicationControl::DiagnosticComControlSubNode Channel. subNodePhysicalChannel
映射规则 For all bus systems, except Ethernet: Create one DcmDspComControlSubNodeChannel for each DiagnosticComControlSubNode Channel.subNodeChannel. Add reference DcmDspComControlSubNodeComMChannelRef and let it refer to the ComMChannel that represents the respective CommunicationCluster that is referenced in the role DiagnosticComControlClass.subNodeChannel. For Ethernet Bus Systems: Create one DcmDspComControlSubNodeChannel for each DiagnosticComControlSubNode Channel.subnodePhysicalChannel. Add reference DcmDspComControlSubNodeComMChannel Ref and let it refer to the ComMChannel that represents the respective PhysicalChannel that is referenced in the role DiagnosticComControlSubNodeChannel.subNodePhysicalChannel.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01033]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspComControl/DcmDspComControlSubNode
BSW 参数 DcmDspComControlSubNodeId
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 The node identification number DcmDspComControlSubNodeId is addressed by the CommunicationControl (0x28) request.
模板描述 This represents the applicable subNode number. The value corresponds to the request message parameter node IdentificationNumber of diagnostic service CommunicationControl (0x28).
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::CommunicationControl::DiagnosticComControlSubNodeChannel. subNodeNumber
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01031]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp
BSW 参数 DcmDspCommonAuthorization
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 This container contains the configuration (parameters) for the common Authorization being equal for several services / sub-services.
模板描述 This represents an instance of the "Routine Control" diagnostic service.
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::RoutineControl:: DiagnosticRoutineControl
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01025]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspControlDTCSetting
BSW 参数 DcmSupportDTCSettingControlOptionRecord
BSW 类型 ECUC-BOOLEAN-PARAM-DEF
BSW 说明 This configuration switch defines if the DTCSettingControlOptionRecord is in general supported in the request message or not.
模板描述 This represents the decision whether the DTCSettingControlOptionRecord (see ISO 14229-1) is in general supported in the request message.
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::ControlDTCSetting::DiagnosticControlDTCSettingClass. controlOptionRecordPresent
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00965]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp
BSW 类型 DcmDspDDDIDcheckPerSourceDID BSW Description Defines the check for session, security and mode dependencies per source DIDs with a ReadDataByIdentifier (0x22). true: Dcm module shall check the session, security and mode dependencies per source DIDs with a ReadDataByIdentifier (0x22) with DID in the range 0xF200 to 0xF3FF false: Dcm module shall not check the session, security and mode dependencies per source DIDs with a ReadDataBy Identifier (0x22) with DID in the range 0xF200 to 0xF3FF Template Description If set to TRUE, the Dcm module shall check the session, security and mode dependencies per source DIDs with a ReadData ByIdentifier (0x22) with DID in the range 0xF200 to 0xF3FF . If set to FALSE. the Dcm module shall not check the session, security and mode dependencies per source DIDs with a Read DataByIdentifier (0x22) with DID in the range 0xF200 to 0xF3FF. M2 Parameter DiagnosticExtract::Dcm::DiagnosticService::DynamicallyDefineDataIdentifier::DiagnosticDynamicallyDefineDataIdentifier Class. checkPerSourceId full
BSW 参数 1:1 mapping
映射规则 valid
映射类型 [ECUC_Dcm_00966]
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp
BSW 参数 DcmDspData
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 This container contains the configuration (parameters) of a Data belonging to a DID
模板描述 DiagnosticSecurityEventReportingModeMapping: This meta-class represents the ability to associate a location in a DID with a security event. The purpose of this mapping is that the location in the DID contains the setting of the reporting mode for the specific security event. This means that the reporting mode of the security event can be set via the diagnostic service WriteDataByIdentifier. DiagnosticSecurityEventReportingModeMapping.securityEvent: This reference identifies the mapped security event. DiagnosticSecurityEventReportingModeMapping.dataElement: This reference identifies the data element that carries the information about the reporting mode. M2 Parameter DiagnosticExtract::DiagnosticMapping::ServiceMapping:: DiagnosticSecurityEventReportingModeMapping , DiagnosticExtract::DiagnosticMapping::ServiceMapping::DiagnosticSecurityEventReportingModeMapping. securityEvent , DiagnosticExtract::DiagnosticMapping::ServiceMapping::DiagnosticSecurityEventReportingModeMapping. dataElement If a DiagnosticSecurityEventReportingModeMapping exists then: • DcmDspDataType shall be set to UINT8_N • DcmDspDataByteSize shall be set to the number of bytes in the DiagnosticDataIdentifier • DcmDspDataUsePort shall be set to USE_DATA_SYNCH_FNC • DcmDspDataReadFnc shall be set to the name of the read API for reporting mode at the IdsM • DcmDspDataWriteFnc shall be set to the name of the write API for reporting mode at the IdsM
映射规则 full
映射类型 valid
映射状态 [ECUC_Dcm_00869]
ECUC 参数 ID ECUC-BOOLEAN-PARAM-DEF
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData
BSW 参数 DcmDspDataByteSize
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Defines the array length in bytes or the maximum array length for variable datalengths.
模板描述 DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , AsamHdo::BaseTypes::Base TypeDirectDefinition. baseTypeSize
映射规则 S/R via array: DcmDspDataByteSize= maxNumberOfElements * (baseTypeSize / 8) C/S of FNC callback: DcmDspDataByteSize= maxNumberOfElements Note: 8 is the baseType Size of UINT8
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01106]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData
BSW 参数 DcmDspDataConditionCheckReadFnc
BSW 类型 ECUC-FUNCTION-NAME-DEF
BSW 说明 Function name to demand application if the conditions (e.g. System state) to read the DID are correct. (ConditionCheck Read-function). Multiplicity shall be equal to parameter DcmDspDataReadFnc. This parameter is related to the interface Xxx_ConditionCheck Read.
模板描述 This is supposed to represent a reference to a BswServiceDependency. the latter is not derived from Referrable and therefore this detour needs to be implemented to still let BswServiceDependency become the target of a reference.
M2 参数 DiagnosticExtract::DiagnosticMapping::ServiceMapping::DiagnosticServiceSwMapping. mappedBswServiceDependency
映射规则 It could be possible to get the FNC name via BswServiceDependency
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00677]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData
BSW 参数 DcmDspDataEndianness
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 Defines the endianness of the data belonging to a DID in a diagnostic request or response message.
模板描述 This attribute specifies the byte order of the base type.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. byteOrder
映射规则 baseType.baseTypeDefinition.byteOrder referenced by swDataDefProps of the Diagnostic Parameter with the role DiagnosticDataIdentifier.dataElement
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00986]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData
BSW 参数 DcmDspDataFreezeCurrentStateFnc
BSW 类型 ECUC-FUNCTION-NAME-DEF
BSW 说明 Function name to request to application to freeze the current state of an IOControl. (FreezeCurrentState-function). This parameter is related to the interface Xxx_FreezeCurrentState. Template Description DiagnosticIoControlNeeds.freezeCurrentStateSupported: This attribute determines, if the referenced port supports temporary freezing of I/O value. The temporary freeze is not supported if the enclosing DiagnosticIoControlNeeds is aggregated by a SwcService Dependency, see [constr_1364]. DiagnosticServiceSwMapping.mappedBswServiceDependency: This is supposed to represent a reference to a BswServiceDependency. the latter is not derived from Referrable and therefore this detour needs to be implemented to still let BswServiceDependency become the target of a reference. M2 Parameter CommonStructure::ServiceNeeds::DiagnosticIoControlNeeds. freezeCurrentStateSupported , Diagnostic Extract::DiagnosticMapping::ServiceMapping::DiagnosticServiceSwMapping. mappedBswServiceDependency It could be possible to get the FNC name via BswServiceDependency
映射规则 full
映射类型 valid
映射状态 [ECUC_Dcm_00674]
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData
BSW 参数 DcmDspDataReadDataLengthFnc
BSW 类型 ECUC-FUNCTION-NAME-DEF
BSW 说明 Function name to request from application the data length of a DID. (ReadDataLength-function). This parameter is related to the interface Xxx_ReadDataLength.
模板描述 This is supposed to represent a reference to a BswServiceDependency. the latter is not derived from Referrable and therefore this detour needs to be implemented to still let BswServiceDependency become the target of a reference.
M2 参数 DiagnosticExtract::DiagnosticMapping::ServiceMapping::DiagnosticServiceSwMapping. mappedBswServiceDependency
映射规则 It could be possible to get the FNC name via BswServiceDependency
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00671]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData
BSW 参数 DcmDspDataReadFnc
BSW 类型 ECUC-FUNCTION-NAME-DEF
BSW 说明 Function name to request from application the data value of a DID. (ReadData-function). This parameter is related to the interface Xxx_ReadData.
模板描述 This is supposed to represent a reference to a BswServiceDependency. the latter is not derived from Referrable and therefore this detour needs to be implemented to still let BswServiceDependency become the target of a reference.
M2 参数 DiagnosticExtract::DiagnosticMapping::ServiceMapping::DiagnosticServiceSwMapping. mappedBswServiceDependency
映射规则 It could be possible to get the FNC name via BswServiceDependency
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00669]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData
BSW 参数 DcmDspDataResetToDefaultFnc
BSW 类型 ECUC-FUNCTION-NAME-DEF BSW Description Function name to request to application to reset an IOControl to default value. (ResetToDefault-function). This parameter is related to the interface Xxx_ResetToDefault. Template Description DiagnosticIoControlNeeds.resetToDefaultSupported: This represents a flag for the existence of the ResetToDefault operation in the service interface. DiagnosticServiceSwMapping.mappedBswServiceDependency: This is supposed to represent a reference to a BswServiceDependency. the latter is not derived from Referrable and therefore this detour needs to be implemented to still let BswServiceDependency become the target of a reference. M2 Parameter CommonStructure::ServiceNeeds::DiagnosticIoControlNeeds. resetToDefaultSupported , DiagnosticExtract::Diagnostic Mapping::ServiceMapping::DiagnosticServiceSwMapping. mappedBswServiceDependency
映射规则 It could be possible to get the FNC name via BswServiceDependency
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00673]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData
BSW 参数 DcmDspDataReturnControlToEcuFnc
BSW 类型 ECUC-FUNCTION-NAME-DEF
BSW 说明 Function name to request to application to return control to ECU of an IOControl. (ReturnControlToECU-function). This parameter is related to the interface Xxx_ReturnControlToECU.
模板描述 This is supposed to represent a reference to a BswServiceDependency. the latter is not derived from Referrable and therefore this detour needs to be implemented to still let BswServiceDependency become the target of a reference.
M2 参数 DiagnosticExtract::DiagnosticMapping::ServiceMapping::DiagnosticServiceSwMapping. mappedBswServiceDependency
映射规则 It could be possible to get the FNC name via BswServiceDependency
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00672]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData
BSW 参数 DcmDspDataShortTermAdjustmentFnc
BSW 类型 ECUC-FUNCTION-NAME-DEF
BSW 说明 Function name to request to application to adjust the IO signal. (ShortTermAdjustment-function). This parameter is related to the interface Xxx_ShortTermAdjustment. Template Description DiagnosticIoControlNeeds.shortTermAdjustmentSupported: This attribute determines, if the referenced port supports temporarily setting of I/O value to a specific value provided by the diagnostic tester. The short term adjustment is not supported if the enclosing DiagnosticIoControlNeeds is aggregated by a SwcService Dependency, see [constr_1364]. DiagnosticServiceSwMapping.mappedBswServiceDependency: This is supposed to represent a reference to a BswServiceDependency. the latter is not derived from Referrable and therefore this detour needs to be implemented to still let BswServiceDependency become the target of a reference. M2 Parameter CommonStructure::ServiceNeeds::DiagnosticIoControlNeeds. shortTermAdjustmentSupported , Diagnostic Extract::DiagnosticMapping::ServiceMapping::DiagnosticServiceSwMapping. mappedBswServiceDependency
映射规则 It could be possible to get the FNC name via BswServiceDependency
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00675]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData
BSW 参数 DcmDspDataType
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 Provide the implementation data type of data belonging to a DID.
模板描述 DiagnosticEnvDataElementCondition: This meta-class represents the ability to formulate a diagnostic environment condition based on the value of a data element owned by the application software. SwDataDefProps: This class is a collection of properties relevant for data objects under various aspects. One could consider this class as a "pattern of inheritance by aggregation". The properties can be applied to all objects of all classes in which SwDataDefProps is aggregated. Note that not all of the attributes or associated elements are useful all of the time. Hence, the process definition (e.g. expressed with an OCL or a Document Control Instance MSR-DCI) has the task of implementing limitations. SwDataDefProps covers various aspects: - Structure of the data element for calibration use cases: is it a single value, a curve, or a map, but also the recordLayouts which specify how such elements are mapped/converted to the DataTypes in the programming language (or in AUTOSAR). This is mainly expressed by properties like swRecordLayout and swCalprmAxisSet - Implementation aspects, mainly expressed by swImplPolicy, swVariableAccessImplPolicy, swAddrMethod, swPointerTaget Props, baseType, implementationDataType and additionalNativeTypeQualifier - Access policy for the MCD system, mainly expressed by swCalibrationAccess - Semantics of the data element, mainly expressed by compuMethod and/or unit, dataConstr, invalidValue - Code generation policy provided by swRecordLayout SwBaseType: This meta-class represents a base type used within ECU software. M2 Parameter DiagnosticExtract::Dcm::EnvironmentalCondition:: DiagnosticEnvDataElementCondition , DataDictionary::DataDef Properties:: SwDataDefProps , AsamHdo::BaseTypes:: SwBaseType Maps to DiagnosticEnvDataElementCondition.swDataDefProps.baseType: BOOLEAN if baseTypeEncoding=BOOLEAN and baseTypeSize = 8 UINT8 if baseType Encoding=NONE and baseTypeSize = 8 SINT8 if baseTypeEncoding=2C and baseTypeSize = 8 UINT16 if baseTypeEncoding=NONE and baseTypeSize = 16 SINT16 if baseTypeEncoding=2C and baseTypeSize = 16 UINT32 if baseTypeEncoding=NONE and baseTypeSize = 32 SINT32 if baseTypeEncoding=2C and baseTypeSize = 32
映射规则 full
映射类型 valid
映射状态 [ECUC_Dcm_00985]
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData/DcmDspDataType
BSW 参数 BOOLEAN
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF BSW Description Type of the data is boolean. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , CommonStructure::ServiceNeeds::DiagnosticValueNeeds. fixedLength
映射规则 baseTypeEncoding = BOOLEAN baseTypeSize = 1 maxNumberOfElements shall not exist array SizeSemantics shall not exist Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData/DcmDspDataType
BSW 参数 FLOAT
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is float. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , CommonStructure::ServiceNeeds::DiagnosticValueNeeds. fixedLength
映射规则 baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements shall not exist arraySizeSemantics shall not exist Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射类型 full Mapping Status
ECUC 参数 ID valid
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData/DcmDspDataType
BSW 参数 FLOAT_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is float array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , CommonStructure::ServiceNeeds::DiagnosticValueNeeds. fixedLength
映射规则 baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements shall not exist arraySizeSemantics shall not exist Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData/DcmDspDataType
BSW 参数 SINT16
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is sint16. Template Description BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , CommonStructure::ServiceNeeds::DiagnosticValueNeeds. fixedLength
映射规则 baseTypeEncoding = 2C baseTypeSize = 16 maxNumberOfElements shall not exist arraySize Semantics shall not exist Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射类型 full Mapping Status
ECUC 参数 ID valid
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData/DcmDspDataType
BSW 参数 SINT16_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is sint16 array.
模板描述 BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , CommonStructure::Service Needs::DiagnosticValueNeeds. fixedLength baseTypeEncoding = 2C baseTypeSize = 16 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001) Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData/DcmDspDataType
BSW 参数 SINT32
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is sint32.
模板描述 BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , CommonStructure::ServiceNeeds::DiagnosticValueNeeds. fixedLength baseTypeEncoding = 2C baseTypeSize = 32 maxNumberOfElements shall not exist arraySize Semantics shall not exist Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData/DcmDspDataType
BSW 参数 SINT32_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is sint32 array.
模板描述 BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , CommonStructure::Service Needs::DiagnosticValueNeeds. fixedLength baseTypeEncoding = 2C baseTypeSize = 32 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001) Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData/DcmDspDataType
BSW 参数 SINT8
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Template Description BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , CommonStructure::ServiceNeeds::DiagnosticValueNeeds. fixedLength Mapping Rule Mapping Type baseTypeEncoding = 2C baseTypeSize = 8 maxNumberOfElements shall not exist arraySize Semantics shall not exist full Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData/DcmDspDataType
BSW 参数 SINT8_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is sint8 array.
模板描述 BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , CommonStructure::Service Needs::DiagnosticValueNeeds. fixedLength baseTypeEncoding = 2C baseTypeSize = 8 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001) Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData/DcmDspDataType
BSW 参数 UINT16
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is uint16.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , CommonStructure::ServiceNeeds::DiagnosticValueNeeds. fixedLength baseTypeEncoding = NONE, UTF-16 baseTypeSize = 16 maxNumberOfElements shall not exist arraySizeSemantics shall not exist Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData/DcmDspDataType
BSW 参数 UINT16_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is uint16 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , CommonStructure::Service Needs::DiagnosticValueNeeds. fixedLength baseTypeEncoding = NONE, UTF-16 baseTypeSize = 16 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001) Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData/DcmDspDataType
BSW 参数 UINT32
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is uint32.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , CommonStructure::ServiceNeeds::DiagnosticValueNeeds. fixedLength baseTypeEncoding = NONE, UTF-32 baseTypeSize = 32 maxNumberOfElements shall not exist arraySizeSemantics shall not exist Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData/DcmDspDataType
BSW 参数 UINT32_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is uint32 array. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , CommonStructure::Service Needs::DiagnosticValueNeeds. fixedLength Mapping Rule baseTypeEncoding = NONE, UTF-32 baseTypeSize = 32 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001) Derivation from DiagnosticValueNeeds.fixedLength=1 possible. full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData/DcmDspDataType
BSW 参数 UINT8
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is uint8.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , CommonStructure::ServiceNeeds::DiagnosticValueNeeds. fixedLength baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements shall not exist arraySizeSemantics shall not exist Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData/DcmDspDataType
BSW 参数 UINT8_DYN
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is uint8 array with dynamic length.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , CommonStructure::Service Needs::DiagnosticValueNeeds. fixedLength baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01002) arraySizeSemantics exists and is set to ArraySizeSemanticsEnum.variableSize (cf. TPS_DEXT_01002) Derivation from DiagnosticValueNeeds.fixedLength=0 possible.
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData/DcmDspDataType
BSW 参数 UINT8_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is uint8 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , CommonStructure::Service Needs::DiagnosticValueNeeds. fixedLength Mapping Rule Mapping Type baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_ DEXT_01001) Derivation from DiagnosticValueNeeds.fixedLength=1 possible. full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData
BSW 参数 DcmDspDataUsePort
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 Defines which interface shall be used to access the data.
模板描述 This attribute controls whether interaction requires the software-component to react synchronously on a request or whether it processes the request in background but still the DCM has to issue the call again to eventually obtain the result of the request.
M2 参数 CommonStructure::ServiceNeeds::DiagnosticValueNeeds. processingStyle
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00713]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData/DcmDspDataUsePort
BSW 参数 USE_DATA_ASYNCH_CLIENT_SERVER
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 The DCM will access the Data using an R-Port requiring a asynchronous ClientServertInterface DataServices_{Data}. The R-Port is named DataServices_{Data} where {Data} is the name of the container DcmDspData.
模板描述 The software-component processes the request in background but still the Dcm has to issue the call again to eventually obtain the result of the request.
M2 参数 CommonStructure::ServiceNeeds::DiagnosticProcessingStyleEnum. processingStyleAsynchronous
映射规则 DiagnosticServiceSwMapping is having a SwcServiceDependency and ServiceNeeds::Diagnostic ProcessingStyleEnum is equal to processingStyleAsynchronous
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData/DcmDspDataUsePort
BSW 参数 USE_DATA_ASYNCH_CLIENT_SERVER_ERROR
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 The Dcm will access the Data using an R-Port requiring a asynchronous ClientServertInterface DataServices_{Data}. The parameter ErrorCode can be returned to allow the application to trigger a negative response during the operation. The R-Port is named DataServices_{Data} where {Data} is the name of the container DcmDspData.
模板描述 The software-component processes the request in background but still the Dcm has to issue the call again to eventually obtain the result of the request or handle error code.
M2 参数 CommonStructure::ServiceNeeds::DiagnosticProcessingStyleEnum. processingStyleAsynchronousWithError
映射规则 DiagnosticServiceSwMapping is having a SwcServiceDependency and ServiceNeeds::Diagnostic ProcessingStyleEnum is equal to processingStyleAsynchronousWithError
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData/DcmDspDataUsePort
BSW 参数 USE_DATA_ASYNCH_FNC
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 The DCM will access the Data using the functions that are defined in parameters of type EcucFunctionNameDef (but without DcmDspDataReadDataLengthFnc) in the DcmDspData container. DCM_E_PENDING return is allowed. OpStatus is existing as IN parameter.
模板描述 The software-component processes the request in background but still the Dcm has to issue the call again to eventually obtain the result of the request.
M2 参数 CommonStructure::ServiceNeeds::DiagnosticProcessingStyleEnum. processingStyleAsynchronous
映射规则 DiagnosticServiceSwMapping is having a BswServiceDependency and ServiceNeeds::Diagnostic ProcessingStyleEnum is equal to processingStyleAsynchronous
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData/DcmDspDataUsePort
BSW 参数 USE_DATA_SENDER_RECEIVER
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 The DCM will access the Data using an Port requiring a SenderReceiverInteface (with isService=false) DataServices_{Data}. The Port is namedDataServices_{Data} where {Data} is the name of the container DcmDspData.
模板描述 This represents the ability to define a mapping of a diagnostic service to a software-component. This kind of service mapping is applicable for the usage of SenderReceiverInterfaces or event/notifier semantics in Service Interfaces on the adaptive platform.
M2 参数 Document ID 673: AUTOSAR_CP_TPS_DiagnosticExtractTemplate DiagnosticExtract::DiagnosticMapping::ServiceMapping:: DiagnosticServiceDataMapping
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData/DcmDspDataUsePort
BSW 参数 USE_DATA_SENDER_RECEIVER_AS_SERVICE
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 The DCM will access the Data using an service Port requiring a SenderReceiverInteface (with isService=true) Data Services_{Data} . The Port is namedDataServices_{Data} where {Data} is the name of the container DcmDspData.
模板描述 This represents the ability to define a mapping of a diagnostic service to a software-component. This kind of service mapping is applicable for the usage of SenderReceiverInterfaces or event/notifier semantics in Service Interfaces on the adaptive platform.
M2 参数 DiagnosticExtract::DiagnosticMapping::ServiceMapping:: DiagnosticServiceDataMapping
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData
BSW 参数 DcmDspDataWriteFnc
BSW 类型 ECUC-FUNCTION-NAME-DEF
BSW 说明 Function name to request application to write the data value of a DID. (WriteData-function). This parameter is related to the interface Xxx_WriteData.
模板描述 This is supposed to represent a reference to a BswServiceDependency. the latter is not derived from Referrable and therefore this detour needs to be implemented to still let BswServiceDependency become the target of a reference.
M2 参数 DiagnosticExtract::DiagnosticMapping::ServiceMapping::DiagnosticServiceSwMapping. mappedBswServiceDependency
映射规则 It could be possible to get the FNC name via BswServiceDependency
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00670]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData/DcmDspDiagnosisScaling/DcmDspAlternativeData Type
BSW 参数 DcmDspTextTableMapping
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 The purpose of the DcmDspTextTableMapping is to associate a texttable value defined in the context of the Dcm to a texttable value defined in the context of a CompuMethod referenced by a DataType that shall be taken to create a dataElement in a SenderReceiverInterface. By this means it is possible to create a primitive version of a TexttableMapping (which can only be applied if a dataElement already exists). In other words, the DcmDspTextTableMapping provides a similar mechanism to the TexttableMapping in a situation where the TexttableMapping cannot be applied since the SenderReceiverInterface for the PortPrototype on the Dcm ServiceComponent does not yet exist. Template Description This meta-class represents the ability to express the relationship between a physical value and the mathematical representation. Note that this is still independent of the technical implementation in data types. It only specifies the formula how the internal value corresponds to its physical pendant. M2 Parameter AsamHdo::ComputationMethod:: CompuMethod This mapping applies if the CompuMethod.category is set to values TEXTTABLE or SCALE_ LINEAR_AND_TEXTTABLE.
映射规则 full
映射类型 valid
映射状态 [ECUC_Dcm_00999]
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData/DcmDspDiagnosisScaling/DcmDspAlternativeData Type/DcmDspTextTableMapping
BSW 参数 DcmDspDiagnosisRepresentationDataValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 The data value in the diagnosis representation.
模板描述 This represents a textual constant in the computation method.
M2 参数 AsamHdo::ComputationMethod::CompuConstTextContent. vt
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01001]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData/DcmDspDiagnosisScaling/DcmDspAlternativeData Type/DcmDspTextTableMapping
BSW 参数 DcmDspInternalDataValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 The ECU internal data value.
模板描述 CompuScale.lowerLimit: This specifies the lower limit of the scale. CompuScale.upperLimit: This specifies the upper limit of a of the scale.
M2 参数 AsamHdo::ComputationMethod::CompuScale. lowerLimit , AsamHdo::ComputationMethod::CompuScale. upperLimit
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01000]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData
BSW 参数 DcmDspDidDataSupportInfo
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 This container defines the supported information.
模板描述 DiagnosticParameter.supportInfo: This attribute represents the ability to define which bit of the support info byte is representing this part of the PID. DiagnosticDataIdentifier.supportInfoByte: This attribute represents the supported information associated with the DiagnosticDataIdentifier.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticParameter. supportInfo , DiagnosticExtract::Common Diagnostics::DiagnosticDataIdentifier. supportInfoByte
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01104]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData/DcmDspExternalSRDataElementClass/DcmData ElementInstance
BSW 参数 DcmDataElementInstanceRef
BSW 类型 ECUC-INSTANCE-REFERENCE-DEF
BSW 说明 Instance Reference to the primitive or array data which shall be read or written. Supported are VariableDataPrototypes in SenderReceiverInterfaces and NvDataInterfaces and ParameterDataPrototypes in ParameterInterfaces (read only). This reference is applicable if the AutosarDataPrototype is typed with a ApplicationPrimitiveDataType of category VALUE or BOOLEAN or ApplicationArrayDataType or if the AutosarDataPrototype is typed with a ImplementationDataType of category VALUE, ARRAY or TYPE_REFERENCE that in turn boils down to VALUE or ARRAY Template Description DiagnosticServiceDataMapping.mappedDataElement: This represents the dataElement in the application software that is accessed for diagnostic purpose. This role is applicable on the classic platform. DiagnosticEnvDataElementCondition: This meta-class represents the ability to formulate a diagnostic environment condition based on the value of a data element owned by the application software. DiagnosticExtract::DiagnosticMapping::ServiceMapping::DiagnosticServiceDataMapping. mappedDataElement , Diagnostic Extract::Dcm::EnvironmentalCondition:: DiagnosticEnvDataElementCondition
M2 参数 DiagnosticServiceDataMapping maps to a primitive data.
映射规则 full
映射类型 valid
映射状态 [ECUC_Dcm_00991]
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData/DcmDspExternalSRDataElementClass/DcmSub ElementInDataElementInstance
BSW 参数 DcmSubElementInDataElementInstanceRef
BSW 类型 ECUC-INSTANCE-REFERENCE-DEF
BSW 说明 Instance Reference to the primitve sub-element (at any level) of composite data in a port which shall be read. Supported are VariableDataPrototypes in SenderReceiverInterfaces and NvDataInterfaces and ParameterDataPrototypes in Parameter Interfaces (read only). This reference is applicable if the AutosarDataPrototype is typed with a ApplicationCompositeData Type.
模板描述 This is supposed to represent a reference to a BswServiceDependency. the latter is not derived from Referrable and therefore this detour needs to be implemented to still let BswServiceDependency become the target of a reference.
M2 参数 DiagnosticExtract::DiagnosticMapping::ServiceMapping::DiagnosticServiceSwMapping. mappedBswServiceDependency
映射规则 DiagnosticServiceDataMapping maps to a primitive element within a composite data, where the AutosarDataPrototype is typed with a ApplicationCompositeDataType.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00990]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData/DcmDspExternalSRDataElementClass/DcmSub ElementInImplDataElementInstance
BSW 参数 DcmSubElementInImplDataElementInstanceRef
BSW 类型 ECUC-INSTANCE-REFERENCE-DEF
BSW 说明 Instance Reference to the primitve sub-element (at any level) of composite data in a port which shall be read. Supported are VariableDataPrototypes in SenderReceiverInterfaces and NvDataInterfaces and ParameterDataPrototypes in Parameter Interfaces (read only). This reference is applicable if the AutosarDataPrototype is typed with a ImplementationDataType of category STRUCTURE or ARRAY. Please note that in case of ARRAY the index attribute in the target reference has to be set to select a single array element. Template Description This is supposed to represent a reference to a BswServiceDependency. the latter is not derived from Referrable and therefore this detour needs to be implemented to still let BswServiceDependency become the target of a reference. M2 Parameter DiagnosticExtract::DiagnosticMapping::ServiceMapping::DiagnosticServiceSwMapping. mappedBswServiceDependency Mapping Rule Mapping Type DiagnosticServiceDataMapping maps to a primitive element within a composite data, where the AutosarDataPrototype is typed with a ApplicationCompositeDataType ImplementationDataType of category STRUCTURE or ARRAY. full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00992]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspData
BSW 参数 DcmDspOdxDataDescription ECUC-ADD-INFO-PARAM-DEF
BSW 类型 Defines additional description for ODX documentation
BSW 说明 This specifies the long name of the object. Long name is targeted to human readers and acts like a headline.
模板描述 GenericStructure::GeneralTemplateClasses::Identifiable::MultilanguageReferrable. longName
M2 参数 Textual description that characterizes the DID element with respect to the ODX long name can be provided by means of the attribute long-Name.
映射规则 full
映射类型 valid
映射状态 [ECUC_Dcm_00988]
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp
BSW 参数 DcmDspDataDefaultEndianness
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 Defines the default endianness belonging to a DID, RID or PID if the corresponding data does not define an endianness.
模板描述 Defines the default endianness of the data belonging to a DID or RID which is applicable if the DiagnosticDataElement does not define the endianness via the swDataDefProps.baseType attribute.
M2 参数 DiagnosticExtract::DiagnosticCommonProps::DiagnosticCommonProps. defaultEndianness
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00987]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp
BSW 参数 DcmDspDid
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 This container contains the configuration (parameters) of the DID.
模板描述 DiagnosticDataIdentifier: This meta-class represents the ability to model a diagnostic data identifier (DID) that is fully specified regarding the payload at configuration-time.
M2 参数 DiagnosticExtract::CommonDiagnostics:: DiagnosticDataIdentifier , DiagnosticExtract::CommonDiagnostics:: DiagnosticDynamicDataIdentifier
映射规则 If the DiagnosticDataIdentifier is referenced by DiagnosticDataByIdentifier, DiagnosticIOControl, or DiagnosticReadDataByPeriodicID,DiagnosticDataChangeTrigger
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00601]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspDid
BSW 参数 DcmDspDidIdentifier
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 2 byte Identifier of the DID Within each DcmConfigSet all DcmDspDidIdentifier values shall be unique.
模板描述 This is the numerical identifier used to identify the DiagnosticAbstractDataIdentifier in the scope of diagnostic workflow
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticAbstractDataIdentifier. id
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00602]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspDid/DcmDspDidSignal
BSW 参数 DcmDspDataByteSize
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Defines the array length in bytes or the maximum array length for variable datalengths.
模板描述 DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. M2 Parameter S/R via array: DcmDspDataByteSize= maxNumberOfElements * (baseTypeSize / 8) C/S of FNC callback: DcmDspDataByteSize= maxNumberOfElements Note: 8 is the baseType Size of UINT8
映射规则 full
映射类型 valid
映射状态 [ECUC_Dcm_01106]
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspDid/DcmDspDidSignal
BSW 参数 DcmDspDidByteOffset
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Defines the absolute byte offset of the data defined by DcmDspDidDataRef reference to DcmDspData container in the DID.
模板描述 This represents the bitOffset of the DiagnosticParameter. The value of the bitOffset shall always be interpreted as relative to the start of the enclosing DiagnosticDataIdentifier, DiagnosticParameterIdentifier, or DiagnosticRoutineSubfunction.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticParameter. bitOffset
映射规则 bitOffset / 8
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01105]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspDid/DcmDspDidSignal
BSW 参数 DcmDspDidSignalCompositeRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Reference to the contained signal.
模板描述 DiagnosticParameterIdent.subElement: This collection represents the subElements on the top level. DiagnosticParameterElement.subElement: This collection represents the sub-elements on the next lower level.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticParameterIdent. subElement , DiagnosticExtract::Common Diagnostics::DiagnosticParameterElement. subElement
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01232]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspDid
BSW 参数 DcmDspDidSignalCompositePool
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 Defines a collection of all contained signals for this root signal.
模板描述 This meta-class represents an element of a DiagnosticParameter if the DiagnosticParameter represents a structure.
M2 参数 DiagnosticExtract::CommonDiagnostics:: DiagnosticParameterElement
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01231]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspDid/DcmDspDidSignalCompositePool/DcmDspDidSignal
BSW 参数 DcmDspDataByteSize
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Defines the array length in bytes or the maximum array length for variable datalengths.
模板描述 DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , AsamHdo::BaseTypes::Base TypeDirectDefinition. baseTypeSize
映射规则 S/R via array: DcmDspDataByteSize= maxNumberOfElements * (baseTypeSize / 8) C/S of FNC callback: DcmDspDataByteSize= maxNumberOfElements Note: 8 is the baseType Size of UINT8
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01106]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspDid/DcmDspDidSignalCompositePool/DcmDspDidSignal
BSW 参数 DcmDspDidByteOffset
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Defines the absolute byte offset of the data defined by DcmDspDidDataRef reference to DcmDspData container in the DID.
模板描述 This represents the bitOffset of the DiagnosticParameter. The value of the bitOffset shall always be interpreted as relative to the start of the enclosing DiagnosticDataIdentifier, DiagnosticParameterIdentifier, or DiagnosticRoutineSubfunction.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticParameter. bitOffset
映射规则 bitOffset / 8
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01105]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspDid/DcmDspDidSignalCompositePool/DcmDspDidSignal
BSW 参数 DcmDspDidSignalCompositeRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Reference to the contained signal.
模板描述 DiagnosticParameterIdent.subElement: This collection represents the subElements on the top level. DiagnosticParameterElement.subElement: This collection represents the sub-elements on the next lower level.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticParameterIdent. subElement , DiagnosticExtract::Common Diagnostics::DiagnosticParameterElement. subElement
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01232]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspDid
BSW 参数 DcmDspDidSize
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Length of a DID in byte(s).
模板描述 This attribute indicates the size in bytes of the DiagnosticDataIdentifier.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticDataIdentifier. didSize
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01099]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspDid
BSW 参数 DcmDspDidSupportInfo
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF BSW Description This container defines the support information to declare the usability of the data bytes within the DIDs
模板描述 This attribute represents the supported information associated with the DiagnosticDataIdentifier.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticDataIdentifier. supportInfoByte
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01102]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspDidInfo
BSW 参数 DcmDspDDDIDMaxElements
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Maximum number of source elements of a DDDID.
模板描述 This represents the maximum number of source elements of the dynamically created DID.
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::DynamicallyDefineDataIdentifier::DiagnosticDynamicallyDefineDataIdentifier. maxSourceElement
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00970]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspDidInfo/DcmDspDidControl
BSW 参数 DcmDspDidControlRoleRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Reference to DcmDspAuthenticationRow that defines a role in that this IO can be be controlled.
模板描述 This attribute allows for the specification of the position of the enclosing role in a bitfield of roles.
M2 参数 DiagnosticExtract::Dcm::DiagnosticAuthRole. bitPosition
映射规则 Applicable if the current access permission is referenced by DiagnosticIOControl. The value of DcmDspDidControlRolebased is calculated based on the bits of all referenced DiagnosticAuth Role.bitPosition, where a value of 2ˆbitPosition is used for each DiagnosticAuthRole.bitPosition. The accumulated value represents a bitfield that has a bit set for each DiagnosticAuthRole.bit Position.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01143]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspDidInfo/DcmDspDidControl
BSW 参数 DcmDspDidControlSecurityLevelRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Reference to DcmDspSecurityRow Security levels allowed to control this DID. If there is no reference, no check of security level shall be done.
模板描述 This represents the associated DiagnosticSecurityLevels
M2 参数 DiagnosticExtract::Dcm::DiagnosticAccessPermission. securityLevel
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00620]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspDidInfo/DcmDspDidControl
BSW 参数 DcmDspDidControlSessionRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Reference to DcmDspSessionRow Sessions allowed to control this DID. If there is no reference, no check of session level shall be done.
模板描述 This represents the associated DiagnosticSessions
M2 参数 DiagnosticExtract::Dcm::DiagnosticAccessPermission. diagnosticSession
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00621]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspDidInfo/DcmDspDidControl
BSW 参数 DcmDspDidFreezeCurrentState
BSW 类型 ECUC-BOOLEAN-PARAM-DEF
BSW 说明 This indicates the presence of "FreezeCurrentState".
模板描述 DiagnosticIOControl.freezeCurrentState: Setting this attribute to true represents the ability of the Dcm to execute a freezeCurrentState. DiagnosticIoControlNeeds.freezeCurrentStateSupported: This attribute determines, if the referenced port supports temporary freezing of I/O value. The temporary freeze is not supported if the enclosing DiagnosticIoControlNeeds is aggregated by a SwcService Dependency, see [constr_1364].
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::IOControl::DiagnosticIOControl. freezeCurrentState , Common Structure::ServiceNeeds::DiagnosticIoControlNeeds. freezeCurrentStateSupported
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00624]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspDidInfo/DcmDspDidControl
BSW 参数 DcmDspDidResetToDefault
BSW 类型 ECUC-BOOLEAN-PARAM-DEF
BSW 说明 This indicates the presence of "ResetToDefault".
模板描述 DiagnosticIOControl.resetToDefault: Setting this attribute to true represents the ability of the Dcm to execute a resetToDefault. DiagnosticIoControlNeeds.resetToDefaultSupported: This represents a flag for the existence of the ResetToDefault operation in the service interface.
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::IOControl::DiagnosticIOControl. resetToDefault , CommonStructure::Service Needs::DiagnosticIoControlNeeds. resetToDefaultSupported
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00623]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspDidInfo/DcmDspDidControl
BSW 参数 DcmDspDidShortTermAdjustment
BSW 类型 ECUC-BOOLEAN-PARAM-DEF
BSW 说明 This indicates the presence of "ShortTermAdjustment".
模板描述 DiagnosticIOControl.shortTermAdjustment: Setting this attribute to true represents the ability of the Dcm to execute a shortTermAdjustment. DiagnosticIoControlNeeds.shortTermAdjustmentSupported: This attribute determines, if the referenced port supports temporarily setting of I/O value to a specific value provided by the diagnostic tester. The short term adjustment is not supported if the enclosing DiagnosticIoControlNeeds is aggregated by a SwcService Dependency, see [constr_1364]. M2 Parameter DiagnosticExtract::Dcm::DiagnosticService::IOControl::DiagnosticIOControl. shortTermAdjustment , Common Structure::ServiceNeeds::DiagnosticIoControlNeeds. shortTermAdjustmentSupported 1:1 mapping
映射规则 full
映射类型 valid
映射状态 [ECUC_Dcm_00625]
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspDidInfo
BSW 参数 DcmDspDidDynamicallyDefined
BSW 类型 ECUC-BOOLEAN-PARAM-DEF
BSW 说明 Indicates if this DID can be dynamically defined true = DID can be dynamically defined false = DID can not be dynamically defined
模板描述 DiagnosticDataIdentifier: This meta-class represents the ability to model a diagnostic data identifier (DID) that is fully specified regarding the payload at configuration-time. DiagnosticDynamicDataIdentifier: This meta-class represents the ability to define a diagnostic data identifier (DID) at run-time.
M2 参数 DiagnosticExtract::CommonDiagnostics:: DiagnosticDataIdentifier , DiagnosticExtract::CommonDiagnostics:: DiagnosticDynamicDataIdentifier
映射规则 true: in case the DiagnosticAbstractDataIdentifier for the DID value is aggregated by Diagnostic DynamicDataIdentifier false: in case the DiagnosticAbstractDataIdentifier for the DID value is aggregated by DiagnosticDataIdentifier
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00612]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspDidInfo/DcmDspDidRead
BSW 参数 DcmDspDidReadRoleRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Reference to DcmDspAuthenticationRow that defines a role in that this DID can be read.
模板描述 This attribute allows for the specification of the position of the enclosing role in a bitfield of roles.
M2 参数 DiagnosticExtract::Dcm::DiagnosticAuthRole. bitPosition
映射规则 Applicable if the current access permission is referenced by DiagnosticReadDataByIdentifier. The value of DcmDspDidReadRole is calculated based calculated based on the bits of all referenced DiagnosticAuthRole.bitPosition, where a value of 2ˆbitPosition is used for each DiagnosticAuth Role.bitPosition. The accumulated value represents a bitfield that has a bit set for each Diagnostic AuthRole.bitPosition.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01141]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspDidInfo/DcmDspDidRead
BSW 参数 DcmDspDidReadSecurityLevelRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Reference to DcmDspSecurityRow Referenced security levels are allowed to read this DID. If there is no reference, no check of security level shall be done.
模板描述 This represents the associated DiagnosticSecurityLevels
M2 参数 DiagnosticExtract::Dcm::DiagnosticAccessPermission. securityLevel
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00614]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspDidInfo/DcmDspDidRead
BSW 参数 DcmDspDidReadSessionRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Reference to DcmDspSessionRow Referenced sessions are allowed to read this DID. If there is no reference, no check of session level shall be done.
模板描述 This represents the associated DiagnosticSessions
M2 参数 DiagnosticExtract::Dcm::DiagnosticAccessPermission. diagnosticSession
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00615]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspDidInfo/DcmDspDidWrite
BSW 参数 DcmDspDidWriteRoleRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Reference to DcmDspAuthenticationRow that defines a role in that this DID can be written.
模板描述 This attribute allows for the specification of the position of the enclosing role in a bitfield of roles.
M2 参数 DiagnosticExtract::Dcm::DiagnosticAuthRole. bitPosition
映射规则 Applicable if the current access permission is referenced by DiagnosticWriteDataByIdentifier. The value of DcmDspDidWriteRolecalculated is calculated based based on the bits of all referenced DiagnosticAuthRole.bitPosition, where a value of 2ˆbitPositionis used for each DiagnosticAuth Role.bitPosition. The accumulated value represents a bitfield that has a bit set for each Diagnostic AuthRole.bitPosition.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01142]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspDidInfo/DcmDspDidWrite
BSW 参数 DcmDspDidWriteSecurityLevelRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Reference to DcmDspSecurityRow Referenced security levels are allowed to wirte this DID. If there is no reference, no check of security level shall be done.
模板描述 This represents the associated DiagnosticSecurityLevels
M2 参数 DiagnosticExtract::Dcm::DiagnosticAccessPermission. securityLevel
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00617]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspDidInfo/DcmDspDidWrite
BSW 参数 DcmDspDidWriteSessionRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Reference to DcmDspSessionRow Referenced sessions are allowed to write this DID. If there is no reference, no check of session level shall be done.
模板描述 This represents the associated DiagnosticSessions
M2 参数 DiagnosticExtract::Dcm::DiagnosticAccessPermission. diagnosticSession
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00618]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspEcuReset/DcmDspEcuResetRow
BSW 参数 DcmDspEcuResetId
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Defines the subfunction ID
模板描述 This represents the maximum number of source elements of the dynamically created DID.
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::DynamicallyDefineDataIdentifier::DiagnosticDynamicallyDefineDataIdentifier. maxSourceElement
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01113]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspEcuReset/DcmDspEcuResetRow
BSW 参数 DcmResponseToEcuReset
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 Defines the answer to EcuReset service should come: Before or after the reset.
模板描述 This attribute defines whether the response to the EcuReset service shall be transmitted before or after the actual reset.
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::EcuReset::DiagnosticEcuResetClass. respondToReset
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01039]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspEcuReset/DcmDspEcuResetRow/DcmResponseToEcu Reset
BSW 参数 AFTER_RESET
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Answer to EcuReset service should come after the reset.
模板描述 Answer to EcuReset service should come after the reset.
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::EcuReset::DiagnosticResponseToEcuResetEnum. respondAfterReset
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspEcuReset/DcmDspEcuResetRow/DcmResponseToEcu Reset
BSW 参数 BEFORE_RESET
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Answer to EcuReset service should come before the reset.
模板描述 Answer to EcuReset service should come before the reset.
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::EcuReset::DiagnosticResponseToEcuResetEnum. respondBeforeReset
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp
BSW 参数 DcmDspMaxDidToRead
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Indicates the maximum allowed DIDs in a single "ReadDataByIdentifier" request.
模板描述 This attribute represents the maximum number of allowed DIDs in a single instance of DiagnosticReadDataByIdentifier.
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::DataByIdentifier::DiagnosticReadDataByIdentifierClass. maxDidToRead
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00638]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp
BSW 参数 DcmDspMaxPeriodicDidToRead
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Indicates the maximum allowed periodicDIDs which can be read in a single "ReadDataByPeriodicIdentifier" request.
模板描述 This represents the maximum number of data identifiers that can be included in one request.
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::ReadDataByPeriodicID::DiagnosticReadDataByPeriodicIDClass. maxPeriodicDidToRead
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00956]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspMemory/DcmDspMemoryIdInfo
BSW 参数 DcmDspMemoryIdValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Value of the memory device identifier used. Each DcmDspMemoryIdInfo should have a unique ID. Template Description This represents the identification of the memory segment.
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::MemoryByAddress::DiagnosticMemoryIdentifier. id
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00913]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspMemory/DcmDspMemoryIdInfo/DcmDspReadMemory RangeByLabelInfo
BSW 参数 DcmDspReadMemoryRangeByLabelHigh
BSW 类型 ECUC-STRING-PARAM-DEF
BSW 说明 High memory address as label (string) of a range allowed for reading.
模板描述 This represents a symbolic label for the upper bound for addresses of the memory segment.
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::MemoryByAddress::DiagnosticMemoryIdentifier. memoryHighAddressLabel
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01070]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspMemory/DcmDspMemoryIdInfo/DcmDspReadMemory RangeByLabelInfo
BSW 参数 DcmDspReadMemoryRangeByLabelLow
BSW 类型 ECUC-STRING-PARAM-DEF
BSW 说明 Low memory address as label (string) of a range allowed for reading.
模板描述 This represents a symbolic label for the lower bound for addresses of the memory segment.
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::MemoryByAddress::DiagnosticMemoryIdentifier. memoryLowAddressLabel
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01069]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspMemory/DcmDspMemoryIdInfo/DcmDspReadMemory RangeByLabelInfo
BSW 参数 DcmDspReadMemoryRangeSecurityLevelRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Link to the Security Access Levels needed for read access on this memory address. If there is no reference, no check of security level shall be done.
模板描述 This represents the associated DiagnosticSecurityLevels
M2 参数 DiagnosticExtract::Dcm::DiagnosticAccessPermission. securityLevel
映射规则 DiagnosticMemoryIdentifier referenced in the role memoryRange is referenced by a Diagnostic ReadMemoryByAddress The accessPermission holds the security level information.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01071]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspMemory/DcmDspMemoryIdInfo/DcmDspReadMemory RangeByLabelInfo
BSW 参数 DcmDspReadMemoryRangeSessionLevelRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Link to the session level needed for access to this memory address range. If there is no reference, no check of session level shall be done.
模板描述 This represents the associated DiagnosticSessions
M2 参数 DiagnosticExtract::Dcm::DiagnosticAccessPermission. diagnosticSession
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01088]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspMemory/DcmDspMemoryIdInfo/DcmDspReadMemory RangeInfo
BSW 参数 DcmDspReadMemoryRangeHigh
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 High memory address of a range allowed for reading
模板描述 This represents the upper bound for addresses of the memory segment.
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::MemoryByAddress::DiagnosticMemoryIdentifier. memoryHighAddress
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00787]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspMemory/DcmDspMemoryIdInfo/DcmDspReadMemory RangeInfo
BSW 参数 DcmDspReadMemoryRangeLow
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Low memory address of a range allowed for reading
模板描述 This represents the lower bound for addresses of the memory segment.
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::MemoryByAddress::DiagnosticMemoryIdentifier. memoryLowAddress
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00786]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspMemory/DcmDspMemoryIdInfo/DcmDspReadMemory RangeInfo
BSW 参数 DcmDspReadMemoryRangeSecurityLevelRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Link to the Security Access Levels needed for read access on this memory address. If there is no reference, no check of security level shall be done.
模板描述 This represents the associated DiagnosticSecurityLevels
M2 参数 DiagnosticExtract::Dcm::DiagnosticAccessPermission. securityLevel
映射规则 DiagnosticMemoryIdentifier referenced in the role memoryRange is referenced by a Diagnostic ReadMemoryByAddress The accessPermission holds the security level information.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00788]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspMemory/DcmDspMemoryIdInfo/DcmDspReadMemory RangeInfo
BSW 参数 DcmDspReadMemoryRangeSessionLevelRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Link to the session level needed for access to this memory address range. If there is no reference, no check of session level shall be done.
模板描述 This represents the associated DiagnosticSessions
M2 参数 DiagnosticExtract::Dcm::DiagnosticAccessPermission. diagnosticSession
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01086]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspMemory/DcmDspMemoryIdInfo/DcmDspWriteMemory RangeByLabelInfo
BSW 参数 DcmDspWriteMemoryRangeByLabelHigh
BSW 类型 ECUC-STRING-PARAM-DEF
BSW 说明 High memory address as label (string) of a range allowed for writing.
模板描述 This represents a symbolic label for the upper bound for addresses of the memory segment.
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::MemoryByAddress::DiagnosticMemoryIdentifier. memoryHighAddressLabel
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01075]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspMemory/DcmDspMemoryIdInfo/DcmDspWriteMemory RangeByLabelInfo
BSW 参数 DcmDspWriteMemoryRangeByLabelLow
BSW 类型 ECUC-STRING-PARAM-DEF
BSW 说明 Low memory address as label (string) of a range allowed for writing.
模板描述 This represents a symbolic label for the lower bound for addresses of the memory segment.
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::MemoryByAddress::DiagnosticMemoryIdentifier. memoryLowAddressLabel
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01074]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspMemory/DcmDspMemoryIdInfo/DcmDspWriteMemory RangeByLabelInfo
BSW 参数 DcmDspWriteMemoryRangeSecurityLevelRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Link to the Security Access Levels needed for write access on this memory address. If there is no reference, no check of security level shall be done.
模板描述 This represents the associated DiagnosticSecurityLevels
M2 参数 DiagnosticExtract::Dcm::DiagnosticAccessPermission. securityLevel
映射规则 DiagnosticMemoryIdentifier referenced in the role memoryRange is referenced by a Diagnostic WriteMemoryByAddress The accessPermission holds the security level information.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01076]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspMemory/DcmDspMemoryIdInfo/DcmDspWriteMemory RangeByLabelInfo
BSW 参数 DcmDspWriteMemoryRangeSessionLevelRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Link to the session level needed for access to this memory address range. If there is no reference, no check of session level shall be done.
模板描述 This represents the associated DiagnosticSessions
M2 参数 DiagnosticExtract::Dcm::DiagnosticAccessPermission. diagnosticSession
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01089]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspMemory/DcmDspMemoryIdInfo/DcmDspWriteMemory RangeInfo
BSW 参数 DcmDspWriteMemoryRangeHigh
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 High memory address of a range allowed for writing.
模板描述 This represents the upper bound for addresses of the memory segment.
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::MemoryByAddress::DiagnosticMemoryIdentifier. memoryHighAddress
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00791]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspMemory/DcmDspMemoryIdInfo/DcmDspWriteMemory RangeInfo
BSW 参数 DcmDspWriteMemoryRangeLow
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Low memory address of a range allowed for writing
模板描述 This represents the lower bound for addresses of the memory segment.
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::MemoryByAddress::DiagnosticMemoryIdentifier. memoryLowAddress
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00790]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspMemory/DcmDspMemoryIdInfo/DcmDspWriteMemory RangeInfo
BSW 参数 DcmDspWriteMemoryRangeSecurityLevelRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Link to the Security Access Levels needed for write access on this memory address. If there is no reference, no check of security level shall be done.
模板描述 This represents the associated DiagnosticSecurityLevels
M2 参数 DiagnosticExtract::Dcm::DiagnosticAccessPermission. securityLevel
映射规则 DiagnosticMemoryIdentifier referenced in the role memoryRange is referenced by a Diagnostic WriteMemoryByAddress The accessPermission holds the security level information.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00793]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspMemory/DcmDspMemoryIdInfo/DcmDspWriteMemory RangeInfo
BSW 参数 DcmDspWriteMemoryRangeSessionLevelRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Link to the session level needed for access to this memory address range. If there is no reference, no check of session level shall be done.
模板描述 This represents the associated DiagnosticSessions
M2 参数 DiagnosticExtract::Dcm::DiagnosticAccessPermission. diagnosticSession
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01087]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspMemoryTransfer/DcmDspMemoryTransferIdInfo
BSW 参数 DcmDspMemoryIdValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Value of the memory device identifier used. Each DcmDspMemoryIdInfo should have a unique ID. The MemoryIdValue is retrieved from the request messages (RMBA,WMBA,RD,RU,DDDI) according to ISO-14229-1 with the most significant byte of the request parameter memoryAddress.
模板描述 This represents the identification of the memory segment.
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::MemoryByAddress::DiagnosticMemoryIdentifier. id
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01138]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPeriodicTransmission
BSW 参数 DcmDspMaxPeriodicDidScheduler
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Defines the maximum number of periodicDataIdentifiers that can be scheduled concurrently.
模板描述 This represents the maximum number of periodic data identifiers that can be scheduled in parallel.
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::ReadDataByPeriodicID::DiagnosticReadDataByPeriodicIDClass. schedulerMaxNumber
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00962]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPeriodicTransmission
BSW 参数 DcmDspPeriodicTransmissionFastRate
BSW 类型 ECUC-FLOAT-PARAM-DEF
BSW 说明 This parameter give the transmission rate of the requested periodicDataIdentifiers to be used if the parameter transmission Mode given in the ReadDataByPeriodicID request is equal to 0x03 ("sendAtFastRate"). This parameter value in seconds have to be configured as a multiple of DcmTaskTime. min: A negative value and zero is not allowed. Template Description DiagnosticPeriodicRate.period: This represents the period of the DiagnosticPeriodicRate in seconds. DiagnosticPeriodicRate.periodicRateCategory: This attribute represents the category of the periodic rate. M2 Parameter DiagnosticExtract::Dcm::DiagnosticService::ReadDataByPeriodicID::DiagnosticPeriodicRate. period , Diagnostic Extract::Dcm::DiagnosticService::ReadDataByPeriodicID::DiagnosticPeriodicRate. periodicRateCategory The parameter shall exist if DiagnosticPeriodicRate.periodicRateCategory is set to Diagnostic PeriodicRateCategoryEnum.periodicRateFast.
映射规则 full
映射类型 valid
映射状态 [ECUC_Dcm_00960]
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPeriodicTransmission
BSW 参数 DcmDspPeriodicTransmissionMediumRate
BSW 类型 ECUC-FLOAT-PARAM-DEF BSW Description This parameter give the transmission rate of the requested periodicDataIdentifiers to be used if the parameter transmission Mode given in the ReadDataByPeriodicID request is equal to 0x02 ("sendAtMediumRate"). This parameter value in seconds have to be configured as a multiple of DcmTaskTime. min: A negative value and zero is not allowed. Template Description DiagnosticPeriodicRate.period: This represents the period of the DiagnosticPeriodicRate in seconds. DiagnosticPeriodicRate.periodicRateCategory: This attribute represents the category of the periodic rate. M2 Parameter DiagnosticExtract::Dcm::DiagnosticService::ReadDataByPeriodicID::DiagnosticPeriodicRate. period , Diagnostic Extract::Dcm::DiagnosticService::ReadDataByPeriodicID::DiagnosticPeriodicRate. periodicRateCategory
映射规则 The parameter shall exist if DiagnosticPeriodicRate.periodicRateCategory is set to Diagnostic PeriodicRateCategoryEnum.periodicRateMedium.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00959]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPeriodicTransmission
BSW 参数 DcmDspPeriodicTransmissionSlowRate
BSW 类型 ECUC-FLOAT-PARAM-DEF
BSW 说明 This parameter give the transmission rate of the requested periodicDataIdentifiers to be used if the parameter transmission Mode given in the ReadDataByPeriodicID request is equal to 0x01 ("sendAtSlowRate"). This parameter value in seconds have to be configured as a multiple of DcmTaskTime. min: A negative value and zero is not allowed.
模板描述 DiagnosticPeriodicRate.period: This represents the period of the DiagnosticPeriodicRate in seconds. DiagnosticPeriodicRate.periodicRateCategory: This attribute represents the category of the periodic rate.
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::ReadDataByPeriodicID::DiagnosticPeriodicRate. period , Diagnostic Extract::Dcm::DiagnosticService::ReadDataByPeriodicID::DiagnosticPeriodicRate. periodicRateCategory
映射规则 The parameter shall exist if DiagnosticPeriodicRate.periodicRateCategory is set to Diagnostic PeriodicRateCategoryEnum.periodicRateSlow.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00958]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp
BSW 参数 DcmDspPid
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 This container defines the availability of a PID to the DCM.
模板描述 This meta-class represents the ability to model a diagnostic parameter identifier (PID) for the purpose of executing on-board diagnostics (OBD).
M2 参数 DiagnosticExtract::CommonDiagnostics:: DiagnosticParameterIdentifier
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00626]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid
BSW 参数 DcmDspPidData
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 This container defines the parameter for a Signal in the PID.
模板描述 This represents the data carried by the DiagnosticParameterIdentifier.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticParameterIdentifier. dataElement
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00865]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid/DcmDspPidData
BSW 参数 DcmDspPidByteOffset
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 This is the position in bytes of the PID structure and will not start at position 0 in case a support information is available (for packeted PIDs).
模板描述 This represents the bitOffset of the DiagnosticParameter. The value of the bitOffset shall always be interpreted as relative to the start of the enclosing DiagnosticDataIdentifier, DiagnosticParameterIdentifier, or DiagnosticRoutineSubfunction.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticParameter. bitOffset
映射规则 bitOffset / 8
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01107]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid/DcmDspPidData
BSW 参数 DcmDspPidDataByteSize
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Defines the array length in bytes or the maximum array length for variable datalengths.
模板描述 BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticData Element. maxNumberOfElements
映射规则 S/R via array: DcmDspPidDataByteSize= maxNumberOfElements * (baseTypeSize / 8) C/S of FNC callback: DcmDspPidDataByteSize= maxNumberOfElements Note: 8 is the baseType Size of UINT8
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01108]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid/DcmDspPidData
BSW 参数 DcmDspPidDataSupportInfo
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 This container defines the supported information.
模板描述 This attribute represents the ability to define which bit of the support info byte is representing this part of the PID.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticParameter. supportInfo
映射规则 Applicable if the DiagnosticParameter is owned by a DiagnosticParameterIdentifier
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00874]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid/DcmDspPidData/DcmDspPidDataSupportInfo
BSW 参数 DcmDspPidDataSupportInfoBit
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Referenced Bit of the SupportInfo
模板描述 defines the bit in the SupportInfo byte, which represents the PID DataElement pidSize / position / size. Unit: byte.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticParameterSupportInfo. supportInfoBit
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00876]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid/DcmDspPidData/DcmDspPidDataSupportInfo
BSW 参数 DcmDspPidDataSupportInfoRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Reference to DcmDspPidSupportInfo
模板描述 This represents the supported information associated with the DiagnosticParameterIdentifier.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticParameterIdentifier. supportInfoByte
映射规则 Shall refer to the DiagnosticParameterIdentifier.supportInfoByte of the enclosing Diagnostic ParameterIdentifier
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00875]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid/DcmDspPidData/DcmDspPidService01/DcmDsp DiagnosisScaling/DcmDspAlternativeDataType
BSW 参数 DcmDspTextTableMapping
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 The purpose of the DcmDspTextTableMapping is to associate a texttable value defined in the context of the Dcm to a texttable value defined in the context of a CompuMethod referenced by a DataType that shall be taken to create a dataElement in a SenderReceiverInterface. By this means it is possible to create a primitive version of a TexttableMapping (which can only be applied if a dataElement already exists). In other words, the DcmDspTextTableMapping provides a similar mechanism to the TexttableMapping in a situation where the TexttableMapping cannot be applied since the SenderReceiverInterface for the PortPrototype on the Dcm ServiceComponent does not yet exist. Template Description This meta-class represents the ability to express the relationship between a physical value and the mathematical representation. Note that this is still independent of the technical implementation in data types. It only specifies the formula how the internal value corresponds to its physical pendant. M2 Parameter AsamHdo::ComputationMethod:: CompuMethod
映射规则 This mapping applies if the CompuMethod.category is set to values TEXTTABLE or SCALE_ LINEAR_AND_TEXTTABLE.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00999]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid/DcmDspPidData/DcmDspPidService01/DcmDsp DiagnosisScaling/DcmDspAlternativeDataType/DcmDspTextTableMapping
BSW 参数 DcmDspDiagnosisRepresentationDataValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 The data value in the diagnosis representation.
模板描述 This represents a textual constant in the computation method.
M2 参数 AsamHdo::ComputationMethod::CompuConstTextContent. vt
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01001]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid/DcmDspPidData/DcmDspPidService01/DcmDsp DiagnosisScaling/DcmDspAlternativeDataType/DcmDspTextTableMapping
BSW 参数 DcmDspInternalDataValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 The ECU internal data value.
模板描述 CompuScale.lowerLimit: This specifies the lower limit of the scale. CompuScale.upperLimit: This specifies the upper limit of a of the scale.
M2 参数 AsamHdo::ComputationMethod::CompuScale. lowerLimit , AsamHdo::ComputationMethod::CompuScale. upperLimit
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01000]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid/DcmDspPidData/DcmDspPidService01/DcmDspPid DataEndianness
BSW 参数 BIG_ENDIAN
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Most significant byte shall be stored at the lowest address.
模板描述 This attribute specifies the byte order of the base type.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. byteOrder
映射规则 BaseTypeDirectDefinition.byteOrder == ByteOrderEnum.mostSignificantByteFirst
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid/DcmDspPidData/DcmDspPidService01/DcmDspPid DataEndianness
BSW 参数 LITTLE_ENDIAN
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Most significant byte shall be stored at the highest address
模板描述 This attribute specifies the byte order of the base type.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. byteOrder
映射规则 BaseTypeDirectDefinition.byteOrder ==ByteOrderEnum.mostSignificantByteLast
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid/DcmDspPidData/DcmDspPidService01/DcmDspPid DataEndianness
BSW 参数 OPAQUE
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Opaque data endianness
模板描述 This attribute specifies the byte order of the base type.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. byteOrder
映射规则 BaseTypeDirectDefinition.byteOrder == ByteOrderEnum.opaque
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid/DcmDspPidData/DcmDspPidService01
BSW 参数 DcmDspPidDataReadFnc
BSW 类型 ECUC-FUNCTION-NAME-DEF
BSW 说明 Function name for reading PID data value. This is only relevant if DcmDspPidDataUsePort==USE_DATA_SYNCH_FNC. This parameter is related to the interface Xxx_ReadData.
模板描述 This is supposed to represent a reference to a BswServiceDependency. the latter is not derived from Referrable and therefore this detour needs to be implemented to still let BswServiceDependency become the target of a reference.
M2 参数 DiagnosticExtract::DiagnosticMapping::ServiceMapping::DiagnosticServiceSwMapping. mappedBswServiceDependency
映射规则 The BswServiceDependency should have aRoleBasedBswModuleEntryAssignment that in turn has attribute role set to xxx_ReadData and points to a BswModuleEntry.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00629]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid/DcmDspPidData/DcmDspPidService01/DcmDspPid DataType
BSW 参数 BOOLEAN
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is boolean.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticParameter Identifier.dataElement baseTypeEncoding = BOOLEAN baseTypeSize = 1
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid/DcmDspPidData/DcmDspPidService01/DcmDspPid DataType
BSW 参数 SINT16
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is sint16.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticParameter Identifier.dataElement baseTypeEncoding = 2C baseTypeSize = 16
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid/DcmDspPidData/DcmDspPidService01/DcmDspPid DataType
BSW 参数 SINT16_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is sint16 array.
模板描述 BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements baseTypeEncoding = 2C baseTypeSize = 16 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid/DcmDspPidData/DcmDspPidService01/DcmDspPid DataType
BSW 参数 SINT32
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is sint32. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticParameter Identifier.dataElement baseTypeEncoding = 2C baseTypeSize = 32
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid/DcmDspPidData/DcmDspPidService01/DcmDspPid DataType
BSW 参数 SINT32_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is sint32 array. Template Description BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements
映射规则 baseTypeEncoding = 2C baseTypeSize = 32 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid/DcmDspPidData/DcmDspPidService01/DcmDspPid DataType
BSW 参数 SINT8
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is sint8.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticParameter Identifier.dataElement baseTypeEncoding = 2C baseTypeSize = 8
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid/DcmDspPidData/DcmDspPidService01/DcmDspPid DataType
BSW 参数 SINT8_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF BSW Description Type of the data is sint8 array. Template Description BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements
映射规则 baseTypeEncoding = 2C baseTypeSize = 8 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid/DcmDspPidData/DcmDspPidService01/DcmDspPid DataType
BSW 参数 UINT16
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is uint16.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticParameter Identifier.dataElement baseTypeEncoding = NONE, UTF-16 baseTypeSize = 16
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid/DcmDspPidData/DcmDspPidService01/DcmDspPid DataType
BSW 参数 UINT16_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is uint16 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements baseTypeEncoding = NONE, UTF-16 baseTypeSize = 16 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid/DcmDspPidData/DcmDspPidService01/DcmDspPid DataType
BSW 参数 UINT32
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is uint32.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticParameter Identifier.dataElement baseTypeEncoding = NONE, UTF-32 baseTypeSize = 32
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid/DcmDspPidData/DcmDspPidService01/DcmDspPid DataType
BSW 参数 UINT32_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is uint32 array. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements
映射规则 baseTypeEncoding = NONE, UTF-32 baseTypeSize = 32 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid/DcmDspPidData/DcmDspPidService01/DcmDspPid DataType
BSW 参数 UINT8
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is uint8.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticParameter Identifier.dataElement baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid/DcmDspPidData/DcmDspPidService01/DcmDspPid DataType
BSW 参数 UINT8_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is uint8 array. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements
映射规则 baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_ DEXT_01001)
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid/DcmDspPidData/DcmDspPidService01/DcmDspPid DataUsePort
BSW 参数 USE_DATA_SENDER_RECEIVER
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Template Description This represents the ability to define a mapping of a diagnostic service to a software-component. This kind of service mapping is applicable for the usage of SenderReceiverInterfaces or event/notifier semantics in Service Interfaces on the adaptive platform. M2 Parameter DiagnosticExtract::DiagnosticMapping::ServiceMapping:: DiagnosticServiceDataMapping Mapping Rule
映射类型 DiagnosticServiceDataMapping.diagnosticDataElement refers to a DiagnosticDataElement that in turn is aggregated in the PID definition where the PortPrototype referenced in the role mapped DataElement.contextPort refers to a DataInterface where attribute isService is set to false. full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid/DcmDspPidData/DcmDspPidService01/DcmDspPid DataUsePort
BSW 参数 USE_DATA_SENDER_RECEIVER_AS_SERVICE
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 This represents the ability to define a mapping of a diagnostic service to a software-component. This kind of service mapping is applicable for the usage of SenderReceiverInterfaces or event/notifier semantics in Service Interfaces on the adaptive platform.
模板描述 DiagnosticExtract::DiagnosticMapping::ServiceMapping:: DiagnosticServiceDataMapping
M2 参数 DiagnosticServiceDataMapping.diagnosticDataElement refers to a DiagnosticDataElement that in turn is aggregated in the PID definition where the PortPrototype referenced in the role mapped DataElement.contextPort refers to a DataInterface where attribute isService is set to true.
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid/DcmDspPidData/DcmDspPidService01/DcmDspPid DataUsePort
BSW 参数 USE_DATA_SYNCH_CLIENT_SERVER
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 This represents the ability to define a mapping of a diagnostic service to a software-component or a basic-software module. If the former is used then this kind of service mapping is applicable for the usage of ClientServerInterfaces.
模板描述 DiagnosticExtract::DiagnosticMapping::ServiceMapping:: DiagnosticServiceSwMapping
M2 参数 DiagnosticServiceSwMapping.diagnosticDataElement refers to a DiagnosticDataElement that in turn is aggregated in the PID definition. DiagnosticServiceSwMapping.mappedSwcService Dependency shall exist.
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid/DcmDspPidData/DcmDspPidService01/DcmDspPid DataUsePort
BSW 参数 USE_DATA_SYNCH_FNC
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 This represents the ability to define a mapping of a diagnostic service to a software-component or a basic-software module. If the former is used then this kind of service mapping is applicable for the usage of ClientServerInterfaces.
模板描述 DiagnosticExtract::DiagnosticMapping::ServiceMapping:: DiagnosticServiceSwMapping
M2 参数 DiagnosticServiceSwMapping.diagnosticDataElement refers to a DiagnosticDataElement that in turn is aggregated in the PID definition and that also defines the role mappedBswService Dependency.
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid/DcmDspPidData/DcmDspPidService01/DcmDspPid Service01ExternalSRDataElementClass/DcmDataElementInstance
BSW 参数 DcmDataElementInstanceRef
BSW 类型 ECUC-INSTANCE-REFERENCE-DEF
BSW 说明 Instance Reference to the primitive or array data which shall be read or written. Supported are VariableDataPrototypes in SenderReceiverInterfaces and NvDataInterfaces and ParameterDataPrototypes in ParameterInterfaces (read only). This reference is applicable if the AutosarDataPrototype is typed with a ApplicationPrimitiveDataType of category VALUE or BOOLEAN or ApplicationArrayDataType or if the AutosarDataPrototype is typed with a ImplementationDataType of category VALUE, ARRAY or TYPE_REFERENCE that in turn boils down to VALUE or ARRAY Template Description DiagnosticServiceDataMapping.mappedDataElement: This represents the dataElement in the application software that is accessed for diagnostic purpose. This role is applicable on the classic platform. DiagnosticEnvDataElementCondition: This meta-class represents the ability to formulate a diagnostic environment condition based on the value of a data element owned by the application software. M2 Parameter DiagnosticExtract::DiagnosticMapping::ServiceMapping::DiagnosticServiceDataMapping. mappedDataElement , Diagnostic Extract::Dcm::EnvironmentalCondition:: DiagnosticEnvDataElementCondition DiagnosticServiceDataMapping maps to a primitive data.
映射规则 full
映射类型 valid
映射状态 [ECUC_Dcm_00991]
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid/DcmDspPidData/DcmDspPidService01/DcmDspPid Service01ExternalSRDataElementClass/DcmSubElementInDataElementInstance
BSW 参数 DcmSubElementInDataElementInstanceRef
BSW 类型 ECUC-INSTANCE-REFERENCE-DEF
BSW 说明 Instance Reference to the primitve sub-element (at any level) of composite data in a port which shall be read. Supported are VariableDataPrototypes in SenderReceiverInterfaces and NvDataInterfaces and ParameterDataPrototypes in Parameter Interfaces (read only). This reference is applicable if the AutosarDataPrototype is typed with a ApplicationCompositeData Type. Template Description This is supposed to represent a reference to a BswServiceDependency. the latter is not derived from Referrable and therefore this detour needs to be implemented to still let BswServiceDependency become the target of a reference. M2 Parameter DiagnosticExtract::DiagnosticMapping::ServiceMapping::DiagnosticServiceSwMapping. mappedBswServiceDependency Mapping Rule Mapping Type DiagnosticServiceDataMapping maps to a primitive element within a composite data, where the AutosarDataPrototype is typed with a ApplicationCompositeDataType. full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00990]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid/DcmDspPidData/DcmDspPidService01/DcmDspPid Service01ExternalSRDataElementClass/DcmSubElementInImplDataElementInstance
BSW 参数 DcmSubElementInImplDataElementInstanceRef
BSW 类型 ECUC-INSTANCE-REFERENCE-DEF BSW Description Instance Reference to the primitve sub-element (at any level) of composite data in a port which shall be read. Supported are VariableDataPrototypes in SenderReceiverInterfaces and NvDataInterfaces and ParameterDataPrototypes in Parameter Interfaces (read only). This reference is applicable if the AutosarDataPrototype is typed with a ImplementationDataType of category STRUCTURE or ARRAY. Please note that in case of ARRAY the index attribute in the target reference has to be set to select a single array element. Template Description This is supposed to represent a reference to a BswServiceDependency. the latter is not derived from Referrable and therefore this detour needs to be implemented to still let BswServiceDependency become the target of a reference. M2 Parameter DiagnosticExtract::DiagnosticMapping::ServiceMapping::DiagnosticServiceSwMapping. mappedBswServiceDependency Mapping Rule DiagnosticServiceDataMapping maps to a primitive element within a composite data, where the AutosarDataPrototype is typed with a ApplicationCompositeDataType ImplementationDataType of category STRUCTURE or ARRAY. Mapping Status valid Mapping Type full ECUC Parameter ID [ECUC_Dcm_00992]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid/DcmDspPidData/DcmDspPidService02
BSW 参数 DcmDspPidDataDemRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Reference to DemPidDataElement in DEM configuration. Allows to link the DCM PID and DEM PID configuration for Mode $02.
模板描述 This represents the PID associated with this instance of the OBD mode 0x02 service.
M2 参数 DiagnosticExtract::Dcm::ObdService::Mode_0x02_RequestPowertrainFreezeFrameData::DiagnosticPowertrainFreezeFrame. pid
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00887]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid
BSW 参数 DcmDspPidIdentifier
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 1 byte Identifier of the PID Within each DcmConfigSet all DcmDspPidIdentifier values shall be unique.
模板描述 This is the numerical identifier used to identify the DiagnosticParameterIdentifier in the scope of diagnostic workflow (see SAE J1979-DA).
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticParameterIdentifier. id
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00627]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid/DcmDspPidService
BSW 参数 DCM_SERVICE_01
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 A PID is used with service $01 only.
模板描述 This represents the PID associated with this instance of the OBD mode 0x01 service.
M2 参数 DiagnosticExtract::Dcm::ObdService::Mode_0x01_RequestCurrentPowertrainDiagnosticData::DiagnosticRequestCurrent PowertrainData. pid
映射规则 Applicable if the DiagnosticParameterIdentifier is only referenced by a DiagnosticRequestCurrent PowertrainData
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid/DcmDspPidService
BSW 参数 DCM_SERVICE_01_02
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 A PID is used with service $01 and $02. Allowed with a PID configuration containing data elements on byte basis.
模板描述 DiagnosticRequestCurrentPowertrainData.pid: This represents the PID associated with this instance of the OBD mode 0x01 service. DiagnosticPowertrainFreezeFrame.pid: This represents the PID associated with this instance of the OBD mode 0x02 service.
M2 参数 DiagnosticExtract::Dcm::ObdService::Mode_0x01_RequestCurrentPowertrainDiagnosticData::DiagnosticRequestCurrent PowertrainData. pid , DiagnosticExtract::Dcm::ObdService::Mode_0x02_RequestPowertrainFreezeFrameData::Diagnostic PowertrainFreezeFrame. pid
映射规则 Applicable if the DiagnosticParameterIdentifier is referenced by both a DiagnosticRequestCurrent PowertrainData and a DiagnosticPowertrainFreezeFrame
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid/DcmDspPidService
BSW 参数 DCM_SERVICE_02
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 A PID is used with service $02 only. Allowed with a PID configuration containing data elements on byte basis.
模板描述 This represents the PID associated with this instance of the OBD mode 0x02 service.
M2 参数 DiagnosticExtract::Dcm::ObdService::Mode_0x02_RequestPowertrainFreezeFrameData::DiagnosticPowertrainFreezeFrame. pid
映射规则 Applicable if the DiagnosticParameterIdentifier is only referenced by a DiagnosticPowertrainFreeze Frame
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid
BSW 参数 DcmDspPidSize
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Length of a PID in byte(s).
模板描述 The size of the entire PID can be greater than the sum of the data elements because padding might be applied. Unit: byte.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticParameterIdentifier. pidSize
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00870]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid
BSW 参数 DcmDspPidSupportInfo
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 This container defines the support information (typically byte A) to declare the usability of the data bytes within the so-called packeted PIDs (e.g. PID$68).
模板描述 This represents the supported information associated with the DiagnosticParameterIdentifier.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticParameterIdentifier. supportInfoByte
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00871]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid/DcmDspPidSupportInfo
BSW 参数 DcmDspPidSupportInfoLen
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Length of the support information in bytes.
模板描述 This represents the size of the supportInfo within the PID. Unit: byte.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticSupportInfoByte. size
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00873]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspPid/DcmDspPidSupportInfo
BSW 参数 DcmDspPidSupportInfoPos
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Position of the support information in bytes.
模板描述 This represents the position of the supportInfo in the PID. Unit: byte.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticSupportInfoByte. position
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00872]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspReadDTCInformation
BSW 参数 DcmDspReadDTCInformationSupportedObdUdsDtc Separation
BSW 类型 ECUC-BOOLEAN-PARAM-DEF
BSW 说明 If this parameter is set to true, the OBD UDS DTC separation is enabled. If this parameter is not configured or set to false, the OBD UDS DTC separation is disabled.
模板描述 3 Byte OBD DTC value based on the definition from SAE J2012. The existence of this attribute is only required if separated UDS and OBD DTC values are used for SAE J1979-2. If this attribute does not exist, then UDS DTC values are used with J1979-2.
M2 参数 DiagnosticExtract::Dem::DiagnosticTroubleCode::DiagnosticTroubleCodeUds. obdDtcValue3Byte
映射规则 DcmDspReadDTCInformationSupportedObdUdsDtcSeparation shall exist and set to true if, in the context of an enclosing DiagnosticContributionSet, at least one DiagnosticTroubleCodeObd exists where attribute obdDTCValue3Byte exists, independently of its value.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01214]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspReadDTCInformation/DcmDspReadDTCInformationUser DefinedFaultMemory
BSW 参数 DcmDspReadDTCInformationUserDefinedFaultMemoryRole Ref
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Reference to DcmDspAuthenticationRow that defines a role in that this user defined memory can be accessed.
模板描述 This attribute allows for the specification of the position of the enclosing role in a bitfield of roles.
M2 参数 DiagnosticExtract::Dcm::DiagnosticAuthRole. bitPosition
映射规则 Applicable for DiagnosticAuthRoles refererenced by a DiagnosticMemoryDestination with DiagnosticMemoryDestination.memoryId having the same value as DcmDspReadDTCInformation UserDefinedFaultMemoryId. The value of DiagnosticAccessPermission is calculated based on the bits of all referenced DiagnosticAuthRole.bitPosition, where a value of 2ˆbitPosition is used for each DiagnosticAuthRole.bitPosition. The accumulated value represents a bitfield that has a bit set for each DiagnosticAuthRole.bitPosition.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01150]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp
BSW 参数 DcmDspRequestControl
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 This container contains the configuration (parameters) of the "Request control of on-board system, test or component" service (Service $08). The DCM will request the control using an R-Port requiring a PortInteface RequestControlServices_{Tid}. The R-Port is named RequestControlServices_{Tid} where {Tid} is the name of the container DcmDspRequestControl.
模板描述 This meta-class represents the ability to model an instance of the OBD mode 0x08 service.
M2 参数 DiagnosticExtract::Dcm::ObdService::Mode_0x08_RequestControlOfOnBoardDevice:: DiagnosticRequestControlOfOnBoardDevice
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00637]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRequestControl
BSW 参数 DcmDspRequestControlInBufferSize
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Number of bytes to be provided in the input buffer of the interface RequestControlServices_{Tid} for OBD Service $08
模板描述 This represents the specified data size for the request message. Unit: byte.
M2 参数 DiagnosticExtract::Dcm::ObdService::Mode_0x08_RequestControlOfOnBoardDevice::DiagnosticTestRoutineIdentifier. requestDataSize
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00722]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRequestControl
BSW 参数 DcmDspRequestControlOutBufferSize
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Number of bytes to be provided in the output buffer of the interface RequestControlServices_{Tid} for OBD Service $08
模板描述 This represents the specified data size for the response message. Unit:byte.
M2 参数 DiagnosticExtract::Dcm::ObdService::Mode_0x08_RequestControlOfOnBoardDevice::DiagnosticTestRoutineIdentifier. responseDataSize
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00723]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRequestControl
BSW 参数 DcmDspRequestControlTestId
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Test Id for Service $08
模板描述 This represents the numerical id of the DiagnosticTestIdentifier (see SAE J1979-DA).
M2 参数 DiagnosticExtract::Dcm::ObdService::Mode_0x08_RequestControlOfOnBoardDevice::DiagnosticTestRoutineIdentifier. id
映射规则 The value shall be taken from DiagnosticRequestControlOfOnBoardDevice.testId.id if available.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00656]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp
BSW 参数 DcmDspRequestFileTransfer
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 This container contains the configuration for RequestFileTransfer. This container only exists if RequestFileTransfer is configured.
模板描述 This diagnostic service instance implements the UDS service 0x38.
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::RequestFileTransfer:: DiagnosticRequestFileTransfer
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01034]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoe
BSW 参数 DcmDspRoeMaxNumChangeOfDataIdentfierEvents
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Maximum number of events that can be simultaneously configured with SubFunction onChangeOfDataIdentifier.
模板描述 The maximum number of events that can be simultaneously configured with sub function onChangeOfDataIdentifier.
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::ResponseOnEvent::DiagnosticResponseOnEventClass. maxNumChangeOfDataIdentfierEvents
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01236]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoe
BSW 参数 DcmDspRoeMaxNumComparisionOfValueEvents
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Maximum number of events that can be simultaneously configured with SubFunction onComparisionOfValues.
模板描述 The maximum number of events that can be simultaneously configured with sub function onComparisonOfValues.
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::ResponseOnEvent::DiagnosticResponseOnEventClass. maxNumComparisionOfValueEvents
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01237]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoe
BSW 参数 DcmDspRoeMaxNumberOfStoredDTCStatusChanged Events
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Maximum number of changed DTC events that can be stored within one DcmDspRoeSchedulerRate interval.
模板描述 The maximum number of DTCs that can be stored as DTCs with change status within one ResponseOnEventSchedulerRate interval.
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::ResponseOnEvent::DiagnosticResponseOnEventClass. maxNumberOfStoredDTCStatusChangedEvents
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01239]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoe
BSW 参数 DcmDspRoeMaxSupportedDIDLength
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Maximum DID response size in bytes allowed for a DID that is used for onComparisionOfValues or onChangeOfDataIdentifier.
模板描述 The maximum number of measurable data bytes allowed for each DID that is used for comparison or data change.
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::ResponseOnEvent::DiagnosticResponseOnEventClass. maxSupportedDIDLength
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01238]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoe
BSW 参数 DcmDspRoeSchedulerRate
BSW 类型 ECUC-FLOAT-PARAM-DEF
BSW 说明 Calling rate of the RoE scheduler. The parameter value is defined in seconds and shall be a multiple of DcmTaskTime.
模板描述 The call rate of the periodic scheduler to compare the values of the DataIdentifier (DID) or to detect DTC status changes.
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::ResponseOnEvent::DiagnosticResponseOnEventClass. responseOnEventSchedulerRate
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01235]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoe
BSW 参数 DcmDspRoeStoreEventSupport
BSW 类型 ECUC-BOOLEAN-PARAM-DEF
BSW 说明 Configures if ResponseOnEvent storageState is supported. If set to true, the use of the storageState bit is supported and if set to false the use of the storageState bit is not supported.
模板描述 Specifies if the storeEvent functionality of the ResponseOnEvent diagnostic service shall be supported or not. If set to true, the storeEvent functionality is available. If set to false the storeEvent functionality is not available.
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::ResponseOnEvent::DiagnosticResponseOnEventClass. storeEventEnabled
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01234]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp
BSW 参数 DcmDspRoutine
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 This container contains the configuration (parameters) for Routines
模板描述 This meta-class represents the ability to define a diagnostic routine.
M2 参数 DiagnosticExtract::CommonDiagnostics:: DiagnosticRoutine
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00640]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine
BSW 参数 DcmDspRequestRoutineResults
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 Provides the configuration of RequestResult subservice for RoutineControl service. Existence indicates that the Request RoutineResults in the RoutineControl is supported.
模板描述 DiagnosticRoutine.requestResult: This represents the ability to request the result of a running routine. DiagnosticRoutineNeeds.diagRoutineType: This denotes the type of diagnostic routine which is implemented by the referenced server port.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticRoutine. requestResult , CommonStructure::ServiceNeeds::Diagnostic RoutineNeeds. diagRoutineType
映射规则 1:1 mapping for DiagnosticRoutine.requestResult OR DiagnosticRoutineNeeds.diagRoutineTyoe == asynchronous
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01023]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults
BSW 参数 DcmDspRequestRoutineResultsFnc
BSW 类型 ECUC-FUNCTION-NAME-DEF
BSW 说明 Function name for request to application the results of a routine. (Routine_RequestResults-function) This parameter is related to the interface Xxx_RequestResults.
模板描述 Specialization of ServiceDependency in the context of an BswInternalBehavior. It allows to associate BswModuleEntries and data defined for a BSW module or cluster to a given ServiceNeeds element.
M2 参数 BswModuleTemplate::BswBehavior:: BswServiceDependency
映射规则 It could be possible to get the FNC name via BswServiceDependency
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00753]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults
BSW 参数 DcmDspRequestRoutineResultsIn
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 Provide description of input parameter of RequestResult subservice for RoutineControl service.
模板描述 This represents the request parameters.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticRequestRoutineResults. request
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01116]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn
BSW 参数 DcmDspRequestRoutineResultsInSignal
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 Provides description of a routine signal used in RoutineControl service. The ordering defined via the index attribute of the subcontainers in this list represents the order of the dataIn_n elements in the XXX_RequestResult function call.
模板描述 This represents the related dataElement of the DiagnosticParameter
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticAbstractParameter. dataElement
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01117]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignal/DcmDspArgumentScaling/DcmDsp AlternativeDataType
BSW 参数 DcmDspTextTableMapping
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 The purpose of the DcmDspTextTableMapping is to associate a texttable value defined in the context of the Dcm to a texttable value defined in the context of a CompuMethod referenced by a DataType that shall be taken to create a dataElement in a SenderReceiverInterface. By this means it is possible to create a primitive version of a TexttableMapping (which can only be applied if a dataElement already exists). In other words, the DcmDspTextTableMapping provides a similar mechanism to the TexttableMapping in a situation where the TexttableMapping cannot be applied since the SenderReceiverInterface for the PortPrototype on the Dcm ServiceComponent does not yet exist. This meta-class represents the ability to express the relationship between a physical value and the mathematical representation. Note that this is still independent of the technical implementation in data types. It only specifies the formula how the internal
模板描述 AsamHdo::ComputationMethod:: CompuMethod
M2 参数 This mapping applies if the CompuMethod.category is set to values TEXTTABLE or SCALE_ LINEAR_AND_TEXTTABLE.
映射规则 full
映射类型 valid
映射状态 [ECUC_Dcm_00999]
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignal/DcmDspArgumentScaling/DcmDsp AlternativeDataType/DcmDspTextTableMapping
BSW 参数 DcmDspDiagnosisRepresentationDataValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 The data value in the diagnosis representation.
模板描述 This represents a textual constant in the computation method.
M2 参数 AsamHdo::ComputationMethod::CompuConstTextContent. vt
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01001]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignal/DcmDspArgumentScaling/DcmDsp AlternativeDataType/DcmDspTextTableMapping
BSW 参数 DcmDspInternalDataValue ECUC-INTEGER-PARAM-DEF
BSW 类型 The ECU internal data value.
BSW 说明 CompuScale.lowerLimit: This specifies the lower limit of the scale. CompuScale.upperLimit:
模板描述 AsamHdo::ComputationMethod::CompuScale. lowerLimit , AsamHdo::ComputationMethod::CompuScale. upperLimit
M2 参数 1:1 mapping
映射规则 full
映射类型 valid
映射状态 [ECUC_Dcm_01000]
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignal
BSW 参数 DcmDspRoutineParameterSize
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Provide the size of a RoutineControl parameter in bytes
模板描述 The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements
映射规则 Only in case of variable length required (according to constr_6008). Calculation: DcmDspRoutineSignalLength = maxNumberOfElements * 8
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01119]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignal
BSW 参数 DcmDspRoutineSignalEndianness
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 Defines the endianness of the data belonging to a Routine In Signal for RequestResult subfunction.
模板描述 This attribute specifies the byte order of the base type.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. byteOrder
映射规则 baseType.baseTypeDefinition.byteOrder referenced by swDataDefProps of the Diagnostic Parameter with the role DiagnostictRequestRoutineResult.response
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01121]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignal
BSW 参数 DcmDspRoutineSignalPos
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Provide the position of the signal in the RoutineControl request/response. The position is defined in bits.
模板描述 This represents the bitOffset of the DiagnosticParameter. The value of the bitOffset shall always be interpreted as relative to the start of the enclosing DiagnosticDataIdentifier, DiagnosticParameterIdentifier, or DiagnosticRoutineSubfunction.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticAbstractParameter. bitOffset
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01118]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignal/DcmDspRoutineSignalType
BSW 参数 BOOLEAN
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is boolean.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = BOOLEAN baseTypeSize = 1
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignal/DcmDspRoutineSignalType
BSW 参数 FLOAT
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is float.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , CommonStructure::ServiceNeeds::DiagnosticValueNeeds. fixedLength baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements shall not exist arraySizeSemantics shall not exist Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignal/DcmDspRoutineSignalType
BSW 参数 FLOAT_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is float array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , CommonStructure::ServiceNeeds::DiagnosticValueNeeds. fixedLength baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements shall not exist arraySizeSemantics shall not exist Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignal/DcmDspRoutineSignalType
BSW 参数 SINT16
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF BSW Description Type of the signal is sint16. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = 2C baseTypeSize = 16
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignal/DcmDspRoutineSignalType
BSW 参数 SINT16_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint16 array. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = 2C baseTypeSize = 16 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignal/DcmDspRoutineSignalType
BSW 参数 SINT32
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint32.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = 2C baseTypeSize = 32
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignal/DcmDspRoutineSignalType
BSW 参数 SINT32_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint32 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = 2C baseTypeSize = 32 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignal/DcmDspRoutineSignalType
BSW 参数 SINT8
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint8.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = 2C baseTypeSize = 8
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignal/DcmDspRoutineSignalType
BSW 参数 SINT8_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint8 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = 2C baseTypeSize = 8 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignal/DcmDspRoutineSignalType
BSW 参数 UINT16
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint16.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = NONE, UTF-16 baseTypeSize = 16
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignal/DcmDspRoutineSignalType
BSW 参数 UINT16_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint16 array. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = NONE, UTF-16 baseTypeSize = 16 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignal/DcmDspRoutineSignalType
BSW 参数 UINT32
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint32.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = NONE, UTF-32 baseTypeSize = 32
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignal/DcmDspRoutineSignalType
BSW 参数 UINT32_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint32 array. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = NONE, UTF-32, UTF-32 baseTypeSize = 32 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignal/DcmDspRoutineSignalType
BSW 参数 UINT8
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint8.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignal/DcmDspRoutineSignalType
BSW 参数 UINT8_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint8 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements exists and value is greater than 0 (cf.TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_ DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignal/DcmDspRoutineSignalType
BSW 参数 VARIABLE_LENGTH
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint8[DcmDspRoutineParameterSize]. This is only valid for the last signal and when DcmDspRoutineSignalType is set to VARIABLE_LENGTH. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = NONE baseTypeSize = 8 arraySizeSemantics = variableSize maxNumberOf Elements exists and value is greater than 0 (cf. TPS_DEXT_01002) arraySizeSemantics exists and is set to ArraySizeSemanticsEnum.variableSize (cf. TPS_DEXT_01002)
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignalCompositePool
BSW 参数 DcmDspRequestRoutineResultsInSignal
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 Provides description of a routine signal used in RoutineControl service. The ordering defined via the index attribute of the subcontainers in this list represents the order of the dataIn_n elements in the XXX_RequestResult function call.
模板描述 This represents the related dataElement of the DiagnosticParameter
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticAbstractParameter. dataElement
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01117]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignalCompositePool/DcmDspRequest RoutineResultsInSignal/DcmDspArgumentScaling/DcmDspAlternativeDataType
BSW 参数 DcmDspTextTableMapping
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 The purpose of the DcmDspTextTableMapping is to associate a texttable value defined in the context of the Dcm to a texttable value defined in the context of a CompuMethod referenced by a DataType that shall be taken to create a dataElement in a SenderReceiverInterface. By this means it is possible to create a primitive version of a TexttableMapping (which can only be applied if a dataElement already exists). In other words, the DcmDspTextTableMapping provides a similar mechanism to the TexttableMapping in a situation where the TexttableMapping cannot be applied since the SenderReceiverInterface for the PortPrototype on the Dcm ServiceComponent does not yet exist. Template Description This meta-class represents the ability to express the relationship between a physical value and the mathematical representation. Note that this is still independent of the technical implementation in data types. It only specifies the formula how the internal value corresponds to its physical pendant. M2 Parameter AsamHdo::ComputationMethod:: CompuMethod
映射规则 This mapping applies if the CompuMethod.category is set to values TEXTTABLE or SCALE_ LINEAR_AND_TEXTTABLE.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00999]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignalCompositePool/DcmDspRequest RoutineResultsInSignal/DcmDspArgumentScaling/DcmDspAlternativeDataType/DcmDspTextTable Mapping
BSW 参数 DcmDspDiagnosisRepresentationDataValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 The data value in the diagnosis representation.
模板描述 This represents a textual constant in the computation method.
M2 参数 AsamHdo::ComputationMethod::CompuConstTextContent. vt
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01001]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignalCompositePool/DcmDspRequest RoutineResultsInSignal/DcmDspArgumentScaling/DcmDspAlternativeDataType/DcmDspTextTable Mapping
BSW 参数 DcmDspInternalDataValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 The ECU internal data value.
模板描述 CompuScale.lowerLimit: This specifies the lower limit of the scale. CompuScale.upperLimit: This specifies the upper limit of a of the scale.
M2 参数 AsamHdo::ComputationMethod::CompuScale. lowerLimit , AsamHdo::ComputationMethod::CompuScale. upperLimit
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01000]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignalCompositePool/DcmDspRequest RoutineResultsInSignal
BSW 参数 DcmDspRoutineParameterSize
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Provide the size of a RoutineControl parameter in bytes
模板描述 The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements
映射规则 Only in case of variable length required (according to constr_6008). Calculation: DcmDspRoutineSignalLength = maxNumberOfElements * 8
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01119]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignalCompositePool/DcmDspRequest RoutineResultsInSignal
BSW 参数 DcmDspRoutineSignalEndianness
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 Defines the endianness of the data belonging to a Routine In Signal for RequestResult subfunction.
模板描述 This attribute specifies the byte order of the base type.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. byteOrder
映射规则 baseType.baseTypeDefinition.byteOrder referenced by swDataDefProps of the Diagnostic Parameter with the role DiagnostictRequestRoutineResult.response
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01121]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignalCompositePool/DcmDspRequest RoutineResultsInSignal
BSW 参数 DcmDspRoutineSignalPos ECUC-INTEGER-PARAM-DEF
BSW 类型 Provide the position of the signal in the RoutineControl request/response. The position is defined in bits.
BSW 说明 This represents the bitOffset of the DiagnosticParameter. The value of the bitOffset shall always be interpreted as relative to the start of the enclosing DiagnosticDataIdentifier, DiagnosticParameterIdentifier, or DiagnosticRoutineSubfunction.
模板描述 DiagnosticExtract::CommonDiagnostics::DiagnosticAbstractParameter. bitOffset
M2 参数 1:1 mapping
映射规则 full
映射类型 valid
映射状态 [ECUC_Dcm_01118]
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignalCompositePool/DcmDspRequest RoutineResultsInSignal/DcmDspRoutineSignalType
BSW 参数 BOOLEAN
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is boolean.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = BOOLEAN baseTypeSize = 1
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignalCompositePool/DcmDspRequest RoutineResultsInSignal/DcmDspRoutineSignalType
BSW 参数 FLOAT
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is float.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , CommonStructure::ServiceNeeds::DiagnosticValueNeeds. fixedLength baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements shall not exist arraySizeSemantics shall not exist Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignalCompositePool/DcmDspRequest RoutineResultsInSignal/DcmDspRoutineSignalType
BSW 参数 FLOAT_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is float array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , CommonStructure::ServiceNeeds::DiagnosticValueNeeds. fixedLength baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements shall not exist arraySizeSemantics shall not exist Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignalCompositePool/DcmDspRequest RoutineResultsInSignal/DcmDspRoutineSignalType
BSW 参数 SINT16
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint16.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = 2C baseTypeSize = 16
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignalCompositePool/DcmDspRequest RoutineResultsInSignal/DcmDspRoutineSignalType
BSW 参数 SINT16_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint16 array. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = 2C baseTypeSize = 16 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignalCompositePool/DcmDspRequest RoutineResultsInSignal/DcmDspRoutineSignalType
BSW 参数 SINT32
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint32. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = 2C baseTypeSize = 32
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignalCompositePool/DcmDspRequest RoutineResultsInSignal/DcmDspRoutineSignalType
BSW 参数 SINT32_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint32 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = 2C baseTypeSize = 32 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignalCompositePool/DcmDspRequest RoutineResultsInSignal/DcmDspRoutineSignalType
BSW 参数 SINT8
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint8.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = 2C baseTypeSize = 8
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignalCompositePool/DcmDspRequest RoutineResultsInSignal/DcmDspRoutineSignalType
BSW 参数 SINT8_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint8 array. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = 2C baseTypeSize = 8 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignalCompositePool/DcmDspRequest RoutineResultsInSignal/DcmDspRoutineSignalType
BSW 参数 UINT16
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint16.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = NONE, UTF-16 baseTypeSize = 16
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignalCompositePool/DcmDspRequest RoutineResultsInSignal/DcmDspRoutineSignalType
BSW 参数 UINT16_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint16 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = NONE, UTF-16 baseTypeSize = 16 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignalCompositePool/DcmDspRequest RoutineResultsInSignal/DcmDspRoutineSignalType
BSW 参数 UINT32
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint32.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = NONE, UTF-32 baseTypeSize = 32
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignalCompositePool/DcmDspRequest RoutineResultsInSignal/DcmDspRoutineSignalType
BSW 参数 UINT32_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint32 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = NONE, UTF-32, UTF-32 baseTypeSize = 32 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignalCompositePool/DcmDspRequest RoutineResultsInSignal/DcmDspRoutineSignalType
BSW 参数 UINT8
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint8.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignalCompositePool/DcmDspRequest RoutineResultsInSignal/DcmDspRoutineSignalType
BSW 参数 UINT8_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint8 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements Mapping Rule Mapping Type referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements exists and value is greater than 0 (cf.TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_ DEXT_01001) full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsIn/DcmDspRequestRoutineResultsInSignalCompositePool/DcmDspRequest RoutineResultsInSignal/DcmDspRoutineSignalType
BSW 参数 VARIABLE_LENGTH
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint8[DcmDspRoutineParameterSize]. This is only valid for the last signal and when DcmDspRoutineSignalType is set to VARIABLE_LENGTH. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = NONE baseTypeSize = 8 arraySizeSemantics = variableSize maxNumberOf Elements exists and value is greater than 0 (cf. TPS_DEXT_01002) arraySizeSemantics exists and is set to ArraySizeSemanticsEnum.variableSize (cf. TPS_DEXT_01002)
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults
BSW 参数 DcmDspRequestRoutineResultsOut
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 Provide description of output parameter of RequestResult subservice for RoutineControl service.
模板描述 This represents the response parameters.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticRequestRoutineResults. response
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00831]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut
BSW 参数 DcmDspRequestRoutineResultsOutSignal
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 Provides description of a routine signal used in RoutineControl service. The ordering defined via the index attribute of the subcontainers in this list represents the order of the dataOutN elements in the XXX_RequestResult function call.
模板描述 This represents the related dataElement of the DiagnosticParameter
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticAbstractParameter. dataElement
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00836]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignal/DcmDspArgumentScaling/DcmDsp AlternativeDataType
BSW 参数 DcmDspTextTableMapping
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 The purpose of the DcmDspTextTableMapping is to associate a texttable value defined in the context of the Dcm to a texttable value defined in the context of a CompuMethod referenced by a DataType that shall be taken to create a dataElement in a SenderReceiverInterface. By this means it is possible to create a primitive version of a TexttableMapping (which can only be applied if a dataElement already exists). In other words, the DcmDspTextTableMapping provides a similar mechanism to the TexttableMapping in a situation where the TexttableMapping cannot be applied since the SenderReceiverInterface for the PortPrototype on the Dcm ServiceComponent does not yet exist. Template Description This meta-class represents the ability to express the relationship between a physical value and the mathematical representation. Note that this is still independent of the technical implementation in data types. It only specifies the formula how the internal value corresponds to its physical pendant. M2 Parameter AsamHdo::ComputationMethod:: CompuMethod
映射规则 This mapping applies if the CompuMethod.category is set to values TEXTTABLE or SCALE_ LINEAR_AND_TEXTTABLE.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00999]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignal/DcmDspArgumentScaling/DcmDsp AlternativeDataType/DcmDspTextTableMapping
BSW 参数 DcmDspDiagnosisRepresentationDataValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 The data value in the diagnosis representation.
模板描述 This represents a textual constant in the computation method.
M2 参数 AsamHdo::ComputationMethod::CompuConstTextContent. vt
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01001]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignal/DcmDspArgumentScaling/DcmDsp AlternativeDataType/DcmDspTextTableMapping
BSW 参数 DcmDspInternalDataValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 The ECU internal data value.
模板描述 CompuScale.lowerLimit: This specifies the lower limit of the scale. CompuScale.upperLimit: This specifies the upper limit of a of the scale.
M2 参数 AsamHdo::ComputationMethod::CompuScale. lowerLimit , AsamHdo::ComputationMethod::CompuScale. upperLimit
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01000]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignal
BSW 参数 DcmDspRoutineParameterSize
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Provide the size of a RoutineControl parameter in bytes
模板描述 The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements
映射规则 Only in case of variable length required (according to constr_6008). Calculation: DcmDspRoutineSignalLength = maxNumberOfElements * 8
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00838]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignal BSW Parameter Type BSW DcmDspRoutineSignalEndianness ECUC-ENUMERATION-PARAM-DEF
BSW 说明 Defines the endianness of the data belonging to a Routine Out Signal for RequestResult subfunction.
模板描述 This attribute specifies the byte order of the base type.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. byteOrder
映射规则 baseType.baseTypeDefinition.byteOrder referenced by swDataDefProps of the Diagnostic Parameter with the role DiagnostictRequestRoutineResult.response
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01013]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignal
BSW 参数 DcmDspRoutineSignalPos
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Provide the position of the signal in the RoutineControl request/response. The position is defined in bits.
模板描述 This represents the bitOffset of the DiagnosticParameter. The value of the bitOffset shall always be interpreted as relative to the start of the enclosing DiagnosticDataIdentifier, DiagnosticParameterIdentifier, or DiagnosticRoutineSubfunction.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticAbstractParameter. bitOffset
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00837]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignal/DcmDspRoutineSignalType
BSW 参数 BOOLEAN
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is boolean.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = BOOLEAN baseTypeSize = 1
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignal/DcmDspRoutineSignalType
BSW 参数 FLOAT
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is float.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , CommonStructure::ServiceNeeds::DiagnosticValueNeeds. fixedLength
映射规则 baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements shall not exist arraySizeSemantics shall not exist
映射类型 full Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignal/DcmDspRoutineSignalType
BSW 参数 FLOAT_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is float array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , CommonStructure::ServiceNeeds::DiagnosticValueNeeds. fixedLength baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements shall not exist arraySizeSemantics shall not exist Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignal/DcmDspRoutineSignalType
BSW 参数 SINT16
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint16.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeSize = 16
映射类型 full baseTypeEncoding = 2C
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignal/DcmDspRoutineSignalType
BSW 参数 SINT16_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint16 array. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = 2C baseTypeSize = 16 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignal/DcmDspRoutineSignalType
BSW 参数 SINT32
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint32.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = 2C baseTypeSize = 32
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignal/DcmDspRoutineSignalType
BSW 参数 SINT32_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint32 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = 2C baseTypeSize = 32 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignal/DcmDspRoutineSignalType
BSW 参数 SINT8
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint8.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = 2C baseTypeSize = 8
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignal/DcmDspRoutineSignalType
BSW 参数 SINT8_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint8 array. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = 2C baseTypeSize = 8 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignal/DcmDspRoutineSignalType
BSW 参数 UINT16
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF BSW Description Type of the signal is uint16. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = NONE, UTF-16 baseTypeSize = 16
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignal/DcmDspRoutineSignalType
BSW 参数 UINT16_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint16 array. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = NONE, UTF-16 baseTypeSize = 16 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignal/DcmDspRoutineSignalType
BSW 参数 UINT32
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint32.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = NONE, UTF-32 baseTypeSize = 32
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignal/DcmDspRoutineSignalType
BSW 参数 UINT32_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint32 array. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = NONE, UTF-32, UTF-32 baseTypeSize = 32 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignal/DcmDspRoutineSignalType
BSW 参数 UINT8
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint8.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignal/DcmDspRoutineSignalType
BSW 参数 UINT8_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint8 array. BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements exists and value is greater than 0 (cf.TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_ DEXT_01001)
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignal/DcmDspRoutineSignalType
BSW 参数 VARIABLE_LENGTH
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint8[DcmDspRoutineParameterSize]. This is only valid for the last signal and when DcmDspRoutineSignalType is set to VARIABLE_LENGTH. BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = NONE baseTypeSize = 8 arraySizeSemantics = variableSize maxNumberOf Elements exists and value is greater than 0 (cf. TPS_DEXT_01002) arraySizeSemantics exists and is set to ArraySizeSemanticsEnum.variableSize (cf. TPS_DEXT_01002)
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignalCompositePool
BSW 参数 DcmDspRequestRoutineResultsOutSignal
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 Provides description of a routine signal used in RoutineControl service. The ordering defined via the index attribute of the subcontainers in this list represents the order of the dataOutN elements in the XXX_RequestResult function call.
模板描述 This represents the related dataElement of the DiagnosticParameter
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticAbstractParameter. dataElement
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00836]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignalCompositePool/DcmDspRequest RoutineResultsOutSignal/DcmDspArgumentScaling/DcmDspAlternativeDataType
BSW 参数 DcmDspTextTableMapping
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 The purpose of the DcmDspTextTableMapping is to associate a texttable value defined in the context of the Dcm to a texttable value defined in the context of a CompuMethod referenced by a DataType that shall be taken to create a dataElement in a SenderReceiverInterface. By this means it is possible to create a primitive version of a TexttableMapping (which can only be applied if a dataElement already exists). In other words, the DcmDspTextTableMapping provides a similar mechanism to the TexttableMapping in a situation where the TexttableMapping cannot be applied since the SenderReceiverInterface for the PortPrototype on the Dcm ServiceComponent does not yet exist. Template Description This meta-class represents the ability to express the relationship between a physical value and the mathematical representation. Note that this is still independent of the technical implementation in data types. It only specifies the formula how the internal value corresponds to its physical pendant. M2 Parameter AsamHdo::ComputationMethod:: CompuMethod
映射规则 This mapping applies if the CompuMethod.category is set to values TEXTTABLE or SCALE_ LINEAR_AND_TEXTTABLE.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00999]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignalCompositePool/DcmDspRequest RoutineResultsOutSignal/DcmDspArgumentScaling/DcmDspAlternativeDataType/DcmDspText TableMapping
BSW 参数 DcmDspDiagnosisRepresentationDataValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 The data value in the diagnosis representation.
模板描述 This represents a textual constant in the computation method.
M2 参数 AsamHdo::ComputationMethod::CompuConstTextContent. vt
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01001]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignalCompositePool/DcmDspRequest RoutineResultsOutSignal/DcmDspArgumentScaling/DcmDspAlternativeDataType/DcmDspText TableMapping
BSW 参数 DcmDspInternalDataValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 The ECU internal data value.
模板描述 CompuScale.lowerLimit: This specifies the lower limit of the scale. CompuScale.upperLimit: This specifies the upper limit of a of the scale.
M2 参数 AsamHdo::ComputationMethod::CompuScale. lowerLimit , AsamHdo::ComputationMethod::CompuScale. upperLimit
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01000]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignalCompositePool/DcmDspRequest RoutineResultsOutSignal
BSW 参数 DcmDspRoutineParameterSize
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Provide the size of a RoutineControl parameter in bytes
模板描述 The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements
映射规则 Only in case of variable length required (according to constr_6008). Calculation: DcmDspRoutineSignalLength = maxNumberOfElements * 8
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00838]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignalCompositePool/DcmDspRequest RoutineResultsOutSignal
BSW 参数 DcmDspRoutineSignalEndianness
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 Defines the endianness of the data belonging to a Routine Out Signal for RequestResult subfunction.
模板描述 This attribute specifies the byte order of the base type.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. byteOrder
映射规则 baseType.baseTypeDefinition.byteOrder referenced by swDataDefProps of the Diagnostic Parameter with the role DiagnostictRequestRoutineResult.response
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01013]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignalCompositePool/DcmDspRequest RoutineResultsOutSignal
BSW 参数 DcmDspRoutineSignalPos ECUC-INTEGER-PARAM-DEF
BSW 类型 Provide the position of the signal in the RoutineControl request/response. The position is defined in bits.
BSW 说明 This represents the bitOffset of the DiagnosticParameter. The value of the bitOffset shall always be interpreted as relative to the start of the enclosing DiagnosticDataIdentifier, DiagnosticParameterIdentifier, or DiagnosticRoutineSubfunction.
模板描述 DiagnosticExtract::CommonDiagnostics::DiagnosticAbstractParameter. bitOffset
M2 参数 1:1 mapping
映射规则 full
映射类型 valid
映射状态 [ECUC_Dcm_00837]
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignalCompositePool/DcmDspRequest RoutineResultsOutSignal/DcmDspRoutineSignalType
BSW 参数 BOOLEAN
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is boolean.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = BOOLEAN baseTypeSize = 1
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignalCompositePool/DcmDspRequest RoutineResultsOutSignal/DcmDspRoutineSignalType
BSW 参数 FLOAT
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is float.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , CommonStructure::ServiceNeeds::DiagnosticValueNeeds. fixedLength baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements shall not exist arraySizeSemantics shall not exist Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignalCompositePool/DcmDspRequest RoutineResultsOutSignal/DcmDspRoutineSignalType
BSW 参数 FLOAT_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is float array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , CommonStructure::ServiceNeeds::DiagnosticValueNeeds. fixedLength baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements shall not exist arraySizeSemantics shall not exist Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignalCompositePool/DcmDspRequest RoutineResultsOutSignal/DcmDspRoutineSignalType
BSW 参数 SINT16
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint16. BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = 2C baseTypeSize = 16
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignalCompositePool/DcmDspRequest RoutineResultsOutSignal/DcmDspRoutineSignalType
BSW 参数 SINT16_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint16 array. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = 2C baseTypeSize = 16 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignalCompositePool/DcmDspRequest RoutineResultsOutSignal/DcmDspRoutineSignalType
BSW 参数 SINT32
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint32. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = 2C baseTypeSize = 32
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignalCompositePool/DcmDspRequest RoutineResultsOutSignal/DcmDspRoutineSignalType
BSW 参数 SINT32_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint32 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = 2C baseTypeSize = 32 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignalCompositePool/DcmDspRequest RoutineResultsOutSignal/DcmDspRoutineSignalType
BSW 参数 SINT8
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint8.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = 2C baseTypeSize = 8
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignalCompositePool/DcmDspRequest RoutineResultsOutSignal/DcmDspRoutineSignalType
BSW 参数 SINT8_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint8 array. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = 2C baseTypeSize = 8 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignalCompositePool/DcmDspRequest RoutineResultsOutSignal/DcmDspRoutineSignalType
BSW 参数 UINT16
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint16.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = NONE, UTF-16 baseTypeSize = 16
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignalCompositePool/DcmDspRequest RoutineResultsOutSignal/DcmDspRoutineSignalType
BSW 参数 UINT16_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint16 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = NONE, UTF-16 baseTypeSize = 16 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignalCompositePool/DcmDspRequest RoutineResultsOutSignal/DcmDspRoutineSignalType
BSW 参数 UINT32
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint32.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = NONE, UTF-32 baseTypeSize = 32
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignalCompositePool/DcmDspRequest RoutineResultsOutSignal/DcmDspRoutineSignalType
BSW 参数 UINT32_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint32 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = NONE, UTF-32, UTF-32 baseTypeSize = 32 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignalCompositePool/DcmDspRequest RoutineResultsOutSignal/DcmDspRoutineSignalType
BSW 参数 UINT8
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint8.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignalCompositePool/DcmDspRequest RoutineResultsOutSignal/DcmDspRoutineSignalType
BSW 参数 UINT8_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint8 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements Mapping Rule Mapping Type referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements exists and value is greater than 0 (cf.TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_ DEXT_01001) full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults/DcmDspRequest RoutineResultsOut/DcmDspRequestRoutineResultsOutSignalCompositePool/DcmDspRequest RoutineResultsOutSignal/DcmDspRoutineSignalType
BSW 参数 VARIABLE_LENGTH
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint8[DcmDspRoutineParameterSize]. This is only valid for the last signal and when DcmDspRoutineSignalType is set to VARIABLE_LENGTH. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticRequest RoutineResults.response baseTypeEncoding = NONE baseTypeSize = 8 arraySizeSemantics = variableSize maxNumberOf Elements exists and value is greater than 0 (cf. TPS_DEXT_01002) arraySizeSemantics exists and is set to ArraySizeSemanticsEnum.variableSize (cf. TPS_DEXT_01002)
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspRequestRoutineResults
BSW 参数 DcmDspRequestRoutineResultsRoleRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Reference to DcmDspAuthenticationRow that defines a role in that this routine results can be read.
模板描述 This attribute allows for the specification of the position of the enclosing role in a bitfield of roles.
M2 参数 DiagnosticExtract::Dcm::DiagnosticAuthRole. bitPosition
映射规则 Applicable if the current access permission is referenced by DiagnosticRequestRoutineResults. The value of DcmDspRequestRoutineResultsRole is calculated based the bits of all referenced DiagnosticAuthRole.bitPosition, where a value of 2ˆbitPosition is used for each DiagnosticAuth Role.bitPosition. The accumulated value represents a bitfield that has a bit set for each Diagnostic AuthRole.bitPosition.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01146]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine
BSW 参数 DcmDspRoutineIdentifier
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 2 bytes Identifier of the RID Within each DcmConfigSet all DcmDspRoutineIdentifier values shall be unique.
模板描述 This is the numerical identifier used to identify the DiagnosticRoutine in the scope of diagnostic workflow
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticRoutine. id
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00641]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine
BSW 参数 DcmDspRoutineUsePort
BSW 类型 ECUC-BOOLEAN-PARAM-DEF
BSW 说明 If this parameter is set to true, the DCM uses a port requiring a PortInterface RoutineServices_{RoutineName}. The R-Port is named RoutineServices_{RoutineName} where {RoutineName} is the name of the container DcmDspRoutine In that case, the configuration must not provide function names in DcmDspStartRoutineFnc, DcmDspStopRoutineFnc or Dcm DspRequestResultsRoutineFnc. If this is false, the DCM expects to find the names of the functions to be used in DcmDsp StartRoutineFnc, DcmDspStopRoutineFnc or DcmDspRequestResultsRoutineFnc.
模板描述 This represents the ability to define a mapping of a diagnostic service to a software-component or a basic-software module. If the former is used then this kind of service mapping is applicable for the usage of ClientServerInterfaces.
M2 参数 DiagnosticExtract::DiagnosticMapping::ServiceMapping:: DiagnosticServiceSwMapping
映射规则 TRUE: DiagnosticServiceSwMapping is having a SwcServiceDependency FALSE: DiagnosticServiceSwMapping is having a BswServiceDependency
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00724]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine
BSW 参数 DcmDspStartRoutine
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 Provides the configuration of Start subservice for RoutineControl service.
模板描述 DiagnosticRoutine.start: This represents the ability to start a routine DiagnosticRoutineNeeds: Specifies the general needs on the configuration of the Diagnostic Communication Manager (Dcm) which are not related to a particular item (e.g. a PID). The main use case is the mapping of service ports to the Dcm which are not related to a particular item. M2 Parameter DiagnosticExtract::CommonDiagnostics::DiagnosticRoutine. start , CommonStructure::ServiceNeeds:: DiagnosticRoutineNeeds A routine always comes with a start routine, independently of whether the execution is done synchronously or asynchronously.
映射规则 full
映射类型 valid
映射状态 [ECUC_Dcm_01021]
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine
BSW 参数 DcmDspStartRoutineFnc
BSW 类型 ECUC-FUNCTION-NAME-DEF
BSW 说明 Function name for request to application to start a routine. (Routine_Start-function) This parameter is related to the interface Xxx_Start.
模板描述 This is supposed to represent a reference to a BswServiceDependency. the latter is not derived from Referrable and therefore this detour needs to be implemented to still let BswServiceDependency become the target of a reference.
M2 参数 DiagnosticExtract::DiagnosticMapping::ServiceMapping::DiagnosticServiceSwMapping. mappedBswServiceDependency
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00664]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine
BSW 参数 DcmDspStartRoutineIn
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 Provide description of input parameter of Start subservice for RoutineControl service
模板描述 This represents the request parameters.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticStartRoutine. request
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00834]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn
BSW 参数 DcmDspStartRoutineInSignal
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 Provide description of a routine signal used in RoutineControl service. The ordering defined via the index attribute of the subcontainers in this list represents the order of the dataInN elements in the XXX_Start function call.
模板描述 This represents the related dataElement of the DiagnosticParameter
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticAbstractParameter. dataElement
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00845]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignal/DcmDspArgumentScaling/DcmDspAlternativeDataType
BSW 参数 DcmDspTextTableMapping
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 The purpose of the DcmDspTextTableMapping is to associate a texttable value defined in the context of the Dcm to a texttable value defined in the context of a CompuMethod referenced by a DataType that shall be taken to create a dataElement in a SenderReceiverInterface. By this means it is possible to create a primitive version of a TexttableMapping (which can only be applied if a dataElement already exists). In other words, the DcmDspTextTableMapping provides a similar mechanism to the TexttableMapping in a situation where the TexttableMapping cannot be applied since the SenderReceiverInterface for the PortPrototype on the Dcm ServiceComponent does not yet exist. Template Description This meta-class represents the ability to express the relationship between a physical value and the mathematical representation. Note that this is still independent of the technical implementation in data types. It only specifies the formula how the internal value corresponds to its physical pendant. M2 Parameter AsamHdo::ComputationMethod:: CompuMethod Mapping Rule Mapping Type This mapping applies if the CompuMethod.category is set to values TEXTTABLE or SCALE_ LINEAR_AND_TEXTTABLE. full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00999]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignal/DcmDspArgumentScaling/DcmDspAlternativeDataType/DcmDspText TableMapping
BSW 参数 DcmDspDiagnosisRepresentationDataValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 The data value in the diagnosis representation.
模板描述 This represents a textual constant in the computation method.
M2 参数 AsamHdo::ComputationMethod::CompuConstTextContent. vt
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01001]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignal/DcmDspArgumentScaling/DcmDspAlternativeDataType/DcmDspText TableMapping BSW Parameter BSW Type DcmDspInternalDataValue ECUC-INTEGER-PARAM-DEF
BSW 说明 The ECU internal data value.
模板描述 CompuScale.lowerLimit: This specifies the lower limit of the scale. CompuScale.upperLimit: This specifies the upper limit of a of the scale.
M2 参数 AsamHdo::ComputationMethod::CompuScale. lowerLimit , AsamHdo::ComputationMethod::CompuScale. upperLimit
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01000]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignal
BSW 参数 DcmDspRoutineParameterSize
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Provide the size of a RoutineControl parameter in bytes
模板描述 The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements
映射规则 "Only in case of variable length required (according to constr_6008). Calculation: DcmDspRoutine SignalLength = maxNumberOfElements * 8.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00847]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignal BSW Parameter Type BSW DcmDspRoutineSignalEndianness ECUC-ENUMERATION-PARAM-DEF
BSW 说明 Defines the endianness of the data belonging to a Routine In Signal for Start subfunction.
模板描述 This attribute specifies the byte order of the base type.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. byteOrder
映射规则 baseType.baseTypeDefinition.byteOrder referenced by swDataDefProps of the Diagnostic Parameter with the role DiagnosticStartRoutine.request.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01016]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignal
BSW 参数 DcmDspRoutineSignalPos
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Provide the position of the signal in the RoutineControl request/response. The position is defined in bits.
模板描述 This represents the bitOffset of the DiagnosticParameter. The value of the bitOffset shall always be interpreted as relative to the start of the enclosing DiagnosticDataIdentifier, DiagnosticParameterIdentifier, or DiagnosticRoutineSubfunction.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticAbstractParameter. bitOffset
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00846]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 BOOLEAN
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is boolean.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.request baseTypeEncoding = BOOLEAN baseTypeSize = 1
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 FLOAT
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is float.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , CommonStructure::ServiceNeeds::DiagnosticValueNeeds. fixedLength baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements shall not exist arraySizeSemantics shall not exist Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 FLOAT_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is float array. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , CommonStructure::ServiceNeeds::DiagnosticValueNeeds. fixedLength
映射规则 baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements shall not exist arraySizeSemantics shall not exist Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 SINT16
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint16.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize Mapping Rule referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.request baseTypeEncoding = 2C baseTypeSize = 16 Mapping Type full valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 SINT16_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint16 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.request baseTypeEncoding = 2C baseTypeSize = 16 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 SINT32
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint32.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.request
映射类型 full baseTypeEncoding = 2C baseTypeSize = 32
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 SINT32_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint32 array. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.request baseTypeEncoding = 2C baseTypeSize = 32 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 SINT8
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint8.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.request baseTypeEncoding = 2C baseTypeSize = 8
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 SINT8_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint8 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.request baseTypeEncoding = 2C baseTypeSize = 8 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either doesnot exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 UINT16
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint16.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.request baseTypeEncoding = NONE, UTF-16 baseTypeSize = 16
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 UINT16_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint16 array. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.request baseTypeEncoding = NONE, UTF-16 baseTypeSize = 16 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 UINT32
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF BSW Description Type of the signal is uint32. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.request baseTypeEncoding = NONE, UTF-32 baseTypeSize = 32
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 UINT32_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint32 array. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.request baseTypeEncoding = NONE, UTF-32 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySize Semantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 UINT8
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint8.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.request baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 UINT8_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint8 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.request baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_ DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 VARIABLE_LENGTH
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint8[DcmDspRoutineParameterSize]. This is only valid for the last signal and when DcmDspRoutineSignalType is set to VARIABLE_LENGTH. BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.request baseTypeEncoding = NONE baseTypeSize = 8 arraySizeSemantics = variableSize maxNumberOf Elements exists and value is greater than 0 (cf. TPS_DEXT_01002) arraySizeSemantics exists and is set to ArraySizeSemanticsEnum.variableSize (cf. TPS_DEXT_01002)
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignalCompositePool
BSW 参数 DcmDspStartRoutineInSignal
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 Provide description of a routine signal used in RoutineControl service. The ordering defined via the index attribute of the subcontainers in this list represents the order of the dataInN elements in the XXX_Start function call.
模板描述 This represents the related dataElement of the DiagnosticParameter
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticAbstractParameter. dataElement
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00845]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignalCompositePool/DcmDspStartRoutineInSignal/DcmDspArgumentScaling/ DcmDspAlternativeDataType
BSW 参数 DcmDspTextTableMapping
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 The purpose of the DcmDspTextTableMapping is to associate a texttable value defined in the context of the Dcm to a texttable value defined in the context of a CompuMethod referenced by a DataType that shall be taken to create a dataElement in a SenderReceiverInterface. By this means it is possible to create a primitive version of a TexttableMapping (which can only be applied if a dataElement already exists). In other words, the DcmDspTextTableMapping provides a similar mechanism to the TexttableMapping in a situation where the TexttableMapping cannot be applied since the SenderReceiverInterface for the PortPrototype on the Dcm ServiceComponent does not yet exist. Template Description This meta-class represents the ability to express the relationship between a physical value and the mathematical representation. Note that this is still independent of the technical implementation in data types. It only specifies the formula how the internal value corresponds to its physical pendant. M2 Parameter AsamHdo::ComputationMethod:: CompuMethod
映射规则 This mapping applies if the CompuMethod.category is set to values TEXTTABLE or SCALE_ LINEAR_AND_TEXTTABLE.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00999]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignalCompositePool/DcmDspStartRoutineInSignal/DcmDspArgumentScaling/ DcmDspAlternativeDataType/DcmDspTextTableMapping
BSW 参数 DcmDspDiagnosisRepresentationDataValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 The data value in the diagnosis representation.
模板描述 This represents a textual constant in the computation method.
M2 参数 AsamHdo::ComputationMethod::CompuConstTextContent. vt
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01001]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignalCompositePool/DcmDspStartRoutineInSignal/DcmDspArgumentScaling/ DcmDspAlternativeDataType/DcmDspTextTableMapping
BSW 参数 DcmDspInternalDataValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 The ECU internal data value.
模板描述 CompuScale.lowerLimit: This specifies the lower limit of the scale. CompuScale.upperLimit: This specifies the upper limit of a of the scale.
M2 参数 AsamHdo::ComputationMethod::CompuScale. lowerLimit , AsamHdo::ComputationMethod::CompuScale. upperLimit
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01000]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignalCompositePool/DcmDspStartRoutineInSignal
BSW 参数 DcmDspRoutineParameterSize
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Provide the size of a RoutineControl parameter in bytes
模板描述 The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements
映射规则 "Only in case of variable length required (according to constr_6008). Calculation: DcmDspRoutine SignalLength = maxNumberOfElements * 8.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00847]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignalCompositePool/DcmDspStartRoutineInSignal
BSW 参数 DcmDspRoutineSignalEndianness
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 Defines the endianness of the data belonging to a Routine In Signal for Start subfunction.
模板描述 This attribute specifies the byte order of the base type.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. byteOrder
映射规则 baseType.baseTypeDefinition.byteOrder referenced by swDataDefProps of the Diagnostic Parameter with the role DiagnosticStartRoutine.request.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01016]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignalCompositePool/DcmDspStartRoutineInSignal
BSW 参数 DcmDspRoutineSignalPos
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Provide the position of the signal in the RoutineControl request/response. The position is defined in bits.
模板描述 This represents the bitOffset of the DiagnosticParameter. The value of the bitOffset shall always be interpreted as relative to the start of the enclosing DiagnosticDataIdentifier, DiagnosticParameterIdentifier, or DiagnosticRoutineSubfunction.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticAbstractParameter. bitOffset
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00846]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignalCompositePool/DcmDspStartRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 BOOLEAN
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is boolean.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.request baseTypeEncoding = BOOLEAN baseTypeSize = 1
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignalCompositePool/DcmDspStartRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 FLOAT
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is float.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , CommonStructure::ServiceNeeds::DiagnosticValueNeeds. fixedLength
映射规则 baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements shall not exist arraySizeSemantics shall not exist Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignalCompositePool/DcmDspStartRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 FLOAT_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is float array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , CommonStructure::ServiceNeeds::DiagnosticValueNeeds. fixedLength baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements shall not exist arraySizeSemantics shall not exist Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignalCompositePool/DcmDspStartRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 SINT16
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint16.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.request baseTypeEncoding = 2C baseTypeSize = 16
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignalCompositePool/DcmDspStartRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 SINT16_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint16 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.request baseTypeEncoding = 2C baseTypeSize = 16 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignalCompositePool/DcmDspStartRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 SINT32
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint32.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.request baseTypeEncoding = 2C baseTypeSize = 32
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignalCompositePool/DcmDspStartRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 SINT32_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint32 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.request baseTypeEncoding = 2C baseTypeSize = 32 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignalCompositePool/DcmDspStartRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 SINT8
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint8.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.request baseTypeEncoding = 2C baseTypeSize = 8
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignalCompositePool/DcmDspStartRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 SINT8_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint8 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.request baseTypeEncoding = 2C baseTypeSize = 8 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either doesnot exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignalCompositePool/DcmDspStartRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 UINT16
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint16.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.request baseTypeEncoding = NONE, UTF-16 baseTypeSize = 16
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignalCompositePool/DcmDspStartRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 UINT16_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint16 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.request baseTypeEncoding = NONE, UTF-16 baseTypeSize = 16 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignalCompositePool/DcmDspStartRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 UINT32
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint32.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.request baseTypeEncoding = NONE, UTF-32 baseTypeSize = 32
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignalCompositePool/DcmDspStartRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 UINT32_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint32 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.request baseTypeEncoding = NONE, UTF-32 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySize Semantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignalCompositePool/DcmDspStartRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 UINT8
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint8.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.request baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignalCompositePool/DcmDspStartRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 UINT8_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint8 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements Mapping Rule Mapping Type referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.request baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_ DEXT_01001) full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineIn/Dcm DspStartRoutineInSignalCompositePool/DcmDspStartRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 VARIABLE_LENGTH
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint8[DcmDspRoutineParameterSize]. This is only valid for the last signal and when DcmDspRoutineSignalType is set to VARIABLE_LENGTH. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.request baseTypeEncoding = NONE baseTypeSize = 8 arraySizeSemantics = variableSize maxNumberOf Elements exists and value is greater than 0 (cf. TPS_DEXT_01002) arraySizeSemantics exists and is set to ArraySizeSemanticsEnum.variableSize (cf. TPS_DEXT_01002)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine
BSW 参数 DcmDspStartRoutineOut
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 Provide description of output parameter of Start subservice for RoutineControl service.
模板描述 This represents the response parameters.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticStartRoutine. response
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00835]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut
BSW 参数 DcmDspStartRoutineOutSignal
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 Provide description of a routine signal used in RoutineControl service. The ordering defined via the index attribute of the subcontainers in this list represents the order of the dataOutN elements in the XXX_Start function call.
模板描述 This represents the related dataElement of the DiagnosticParameter
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticAbstractParameter. dataElement
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00848]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignal/DcmDspArgumentScaling/DcmDspAlternativeDataType
BSW 参数 DcmDspTextTableMapping
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 The purpose of the DcmDspTextTableMapping is to associate a texttable value defined in the context of the Dcm to a texttable value defined in the context of a CompuMethod referenced by a DataType that shall be taken to create a dataElement in a SenderReceiverInterface. By this means it is possible to create a primitive version of a TexttableMapping (which can only be applied if a dataElement already exists). In other words, the DcmDspTextTableMapping provides a similar mechanism to the TexttableMapping in a situation where the TexttableMapping cannot be applied since the SenderReceiverInterface for the PortPrototype on the Dcm ServiceComponent does not yet exist. Template Description This meta-class represents the ability to express the relationship between a physical value and the mathematical representation. Note that this is still independent of the technical implementation in data types. It only specifies the formula how the internal value corresponds to its physical pendant. M2 Parameter AsamHdo::ComputationMethod:: CompuMethod This mapping applies if the CompuMethod.category is set to values TEXTTABLE or SCALE_ LINEAR_AND_TEXTTABLE.
映射规则 full
映射类型 valid
映射状态 [ECUC_Dcm_00999]
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignal/DcmDspArgumentScaling/DcmDspAlternativeDataType/DcmDsp TextTableMapping
BSW 参数 DcmDspDiagnosisRepresentationDataValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 The data value in the diagnosis representation.
模板描述 This represents a textual constant in the computation method.
M2 参数 AsamHdo::ComputationMethod::CompuConstTextContent. vt
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01001]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignal/DcmDspArgumentScaling/DcmDspAlternativeDataType/DcmDsp TextTableMapping
BSW 参数 DcmDspInternalDataValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 The ECU internal data value.
模板描述 CompuScale.lowerLimit: This specifies the lower limit of the scale. CompuScale.upperLimit: This specifies the upper limit of a of the scale.
M2 参数 AsamHdo::ComputationMethod::CompuScale. lowerLimit , AsamHdo::ComputationMethod::CompuScale. upperLimit
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01000]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignal
BSW 参数 DcmDspRoutineParameterSize
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Provide the size of a RoutineControl parameter in bytes
模板描述 The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements
映射规则 Only in case of variable length required (according to constr_6008). Calculation: DcmDspRoutine SignalLength = maxNumberOfElements * 8.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00850]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignal BSW Parameter Type BSW DcmDspRoutineSignalEndianness ECUC-ENUMERATION-PARAM-DEF
BSW 说明 Defines the endianness of the data belonging to a Routine Out Signal for Start subfunction.
模板描述 This attribute specifies the byte order of the base type.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. byteOrder
映射规则 baseType.baseTypeDefinition.byteOrder referenced by swDataDefProps of the Diagnostic Parameter with the role DiagnosticStartRoutine.response
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01017]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignal
BSW 参数 DcmDspRoutineSignalPos
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Provide the position of the signal in the RoutineControl request/response. The position is defined in bits.
模板描述 This represents the bitOffset of the DiagnosticParameter. The value of the bitOffset shall always be interpreted as relative to the start of the enclosing DiagnosticDataIdentifier, DiagnosticParameterIdentifier, or DiagnosticRoutineSubfunction.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticAbstractParameter. bitOffset
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00867]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignal/DcmDspRoutineSignalType
BSW 参数 BOOLEAN
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is boolean.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.response baseTypeEncoding = BOOLEAN baseTypeSize = 1
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignal/DcmDspRoutineSignalType
BSW 参数 FLOAT
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is float. BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , CommonStructure::ServiceNeeds::DiagnosticValueNeeds. fixedLength
映射规则 baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements shall not exist arraySizeSemantics shall not exist Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignal/DcmDspRoutineSignalType
BSW 参数 FLOAT_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is float array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , CommonStructure::ServiceNeeds::DiagnosticValueNeeds. fixedLength
映射规则 baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements shall not exist arraySizeSemantics shall not exist Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignal/DcmDspRoutineSignalType
BSW 参数 SINT16
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint16.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.response baseTypeEncoding = 2C baseTypeSize = 16
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignal/DcmDspRoutineSignalType
BSW 参数 SINT16_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint16 array. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition.
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.response baseTypeEncoding = 2C baseTypeSize = 16 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignal/DcmDspRoutineSignalType
BSW 参数 SINT32
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint32.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.response baseTypeEncoding = 2C baseTypeSize = 32
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignal/DcmDspRoutineSignalType
BSW 参数 SINT32_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint32 array. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition.
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.response baseTypeEncoding = 2C baseTypeSize = 32 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignal/DcmDspRoutineSignalType
BSW 参数 SINT8
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint8.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.response baseTypeEncoding = 2C baseTypeSize = 8
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignal/DcmDspRoutineSignalType
BSW 参数 SINT8_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint8 array. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition.
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.response baseTypeEncoding = 2C baseTypeSize = 8 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignal/DcmDspRoutineSignalType
BSW 参数 UINT16
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint16.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.response baseTypeEncoding = NONE, UTF-16 baseTypeSize = 16
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignal/DcmDspRoutineSignalType
BSW 参数 UINT16_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint16 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.response baseTypeEncoding = NONE, UTF-16 baseTypeSize = 16 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemanticseither does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignal/DcmDspRoutineSignalType
BSW 参数 UINT32
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint32.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.response baseTypeEncoding = NONE, UTF-32 baseTypeSize = 32
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignal/DcmDspRoutineSignalType
BSW 参数 UINT32_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint32 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.response baseTypeEncoding = NONE, UTF-32 baseTypeSize = 32 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemanticseither does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignal/DcmDspRoutineSignalType
BSW 参数 UINT8
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint8.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.response baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignal/DcmDspRoutineSignalType
BSW 参数 UINT8_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint8 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.response baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_ DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignal/DcmDspRoutineSignalType
BSW 参数 VARIABLE_LENGTH
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint8[DcmDspRoutineParameterSize]. This is only valid for the last signal and when DcmDspRoutineSignalType is set to VARIABLE_LENGTH. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.response baseTypeEncoding = NONE baseTypeSize = 8 arraySizeSemantics = variableSize maxNumberOf Elements exists and value is greater than 0 (cf. TPS_DEXT_01002) arraySizeSemantics exists and is set to ArraySizeSemanticsEnum.variableSize (cf. TPS_DEXT_01002)
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignalCompositePool
BSW 参数 DcmDspStartRoutineOutSignal
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 Provide description of a routine signal used in RoutineControl service. The ordering defined via the index attribute of the subcontainers in this list represents the order of the dataOutN elements in the XXX_Start function call.
模板描述 This represents the related dataElement of the DiagnosticParameter
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticAbstractParameter. dataElement
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00848]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignalCompositePool/DcmDspStartRoutineOutSignal/DcmDspArgument Scaling/DcmDspAlternativeDataType
BSW 参数 DcmDspTextTableMapping
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 The purpose of the DcmDspTextTableMapping is to associate a texttable value defined in the context of the Dcm to a texttable value defined in the context of a CompuMethod referenced by a DataType that shall be taken to create a dataElement in a SenderReceiverInterface. By this means it is possible to create a primitive version of a TexttableMapping (which can only be applied if a dataElement already exists). In other words, the DcmDspTextTableMapping provides a similar mechanism to the TexttableMapping in a situation where the TexttableMapping cannot be applied since the SenderReceiverInterface for the PortPrototype on the Dcm ServiceComponent does not yet exist. Template Description This meta-class represents the ability to express the relationship between a physical value and the mathematical representation. Note that this is still independent of the technical implementation in data types. It only specifies the formula how the internal value corresponds to its physical pendant.
M2 参数 AsamHdo::ComputationMethod:: CompuMethod
映射规则 This mapping applies if the CompuMethod.category is set to values TEXTTABLE or SCALE_ LINEAR_AND_TEXTTABLE.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00999]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignalCompositePool/DcmDspStartRoutineOutSignal/DcmDspArgument Scaling/DcmDspAlternativeDataType/DcmDspTextTableMapping
BSW 参数 DcmDspDiagnosisRepresentationDataValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 The data value in the diagnosis representation.
模板描述 This represents a textual constant in the computation method.
M2 参数 AsamHdo::ComputationMethod::CompuConstTextContent. vt
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01001]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignalCompositePool/DcmDspStartRoutineOutSignal/DcmDspArgument Scaling/DcmDspAlternativeDataType/DcmDspTextTableMapping
BSW 参数 DcmDspInternalDataValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 The ECU internal data value.
模板描述 CompuScale.lowerLimit: This specifies the lower limit of the scale. CompuScale.upperLimit: This specifies the upper limit of a of the scale.
M2 参数 AsamHdo::ComputationMethod::CompuScale. lowerLimit , AsamHdo::ComputationMethod::CompuScale. upperLimit
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01000]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignalCompositePool/DcmDspStartRoutineOutSignal
BSW 参数 DcmDspRoutineParameterSize
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Provide the size of a RoutineControl parameter in bytes
模板描述 The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements
映射规则 Only in case of variable length required (according to constr_6008). Calculation: DcmDspRoutine SignalLength = maxNumberOfElements * 8.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00850]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignalCompositePool/DcmDspStartRoutineOutSignal BSW Parameter BSW Type DcmDspRoutineSignalEndianness ECUC-ENUMERATION-PARAM-DEF
BSW 说明 Defines the endianness of the data belonging to a Routine Out Signal for Start subfunction.
模板描述 This attribute specifies the byte order of the base type.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. byteOrder
映射规则 baseType.baseTypeDefinition.byteOrder referenced by swDataDefProps of the Diagnostic Parameter with the role DiagnosticStartRoutine.response
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01017]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignalCompositePool/DcmDspStartRoutineOutSignal
BSW 参数 DcmDspRoutineSignalPos
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Provide the position of the signal in the RoutineControl request/response. The position is defined in bits.
模板描述 This represents the bitOffset of the DiagnosticParameter. The value of the bitOffset shall always be interpreted as relative to the start of the enclosing DiagnosticDataIdentifier, DiagnosticParameterIdentifier, or DiagnosticRoutineSubfunction.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticAbstractParameter. bitOffset
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00867]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignalCompositePool/DcmDspStartRoutineOutSignal/DcmDspRoutine SignalType
BSW 参数 BOOLEAN
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is boolean.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.response baseTypeEncoding = BOOLEAN baseTypeSize = 1
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignalCompositePool/DcmDspStartRoutineOutSignal/DcmDspRoutine SignalType
BSW 参数 FLOAT
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is float.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , CommonStructure::ServiceNeeds::DiagnosticValueNeeds. fixedLength
映射规则 baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements shall not exist arraySizeSemantics shall not exist Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignalCompositePool/DcmDspStartRoutineOutSignal/DcmDspRoutine SignalType
BSW 参数 FLOAT_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is float array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , CommonStructure::ServiceNeeds::DiagnosticValueNeeds. fixedLength
映射规则 baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements shall not exist arraySizeSemantics shall not exist Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignalCompositePool/DcmDspStartRoutineOutSignal/DcmDspRoutine SignalType
BSW 参数 SINT16
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint16.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.response baseTypeEncoding = 2C baseTypeSize = 16
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignalCompositePool/DcmDspStartRoutineOutSignal/DcmDspRoutine SignalType
BSW 参数 SINT16_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint16 array. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.response baseTypeEncoding = 2C baseTypeSize = 16 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignalCompositePool/DcmDspStartRoutineOutSignal/DcmDspRoutine SignalType
BSW 参数 SINT32
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint32.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.response baseTypeEncoding = 2C baseTypeSize = 32
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignalCompositePool/DcmDspStartRoutineOutSignal/DcmDspRoutine SignalType
BSW 参数 SINT32_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint32 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.response baseTypeEncoding = 2C baseTypeSize = 32 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignalCompositePool/DcmDspStartRoutineOutSignal/DcmDspRoutine SignalType
BSW 参数 SINT8
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint8.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.response baseTypeEncoding = 2C baseTypeSize = 8
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignalCompositePool/DcmDspStartRoutineOutSignal/DcmDspRoutine SignalType
BSW 参数 SINT8_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint8 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics Mapping Rule Mapping Type referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.response baseTypeEncoding = 2C baseTypeSize = 8 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001) full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignalCompositePool/DcmDspStartRoutineOutSignal/DcmDspRoutine SignalType
BSW 参数 UINT16
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint16.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.response baseTypeEncoding = NONE, UTF-16 baseTypeSize = 16
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignalCompositePool/DcmDspStartRoutineOutSignal/DcmDspRoutine SignalType
BSW 参数 UINT16_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint16 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.response baseTypeEncoding = NONE, UTF-16 baseTypeSize = 16 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemanticseither does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignalCompositePool/DcmDspStartRoutineOutSignal/DcmDspRoutine SignalType
BSW 参数 UINT32
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint32. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.response baseTypeEncoding = NONE, UTF-32 baseTypeSize = 32
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignalCompositePool/DcmDspStartRoutineOutSignal/DcmDspRoutine SignalType
BSW 参数 UINT32_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint32 array. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.response baseTypeEncoding = NONE, UTF-32 baseTypeSize = 32 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemanticseither does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignalCompositePool/DcmDspStartRoutineOutSignal/DcmDspRoutine SignalType
BSW 参数 UINT8
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint8.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.response baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignalCompositePool/DcmDspStartRoutineOutSignal/DcmDspRoutine SignalType
BSW 参数 UINT8_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint8 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.response baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_ DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine/DcmDspStartRoutineOut/ DcmDspStartRoutineOutSignalCompositePool/DcmDspStartRoutineOutSignal/DcmDspRoutine SignalType
BSW 参数 VARIABLE_LENGTH
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint8[DcmDspRoutineParameterSize]. This is only valid for the last signal and when DcmDspRoutineSignalType is set to VARIABLE_LENGTH. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStart Routine.response baseTypeEncoding = NONE baseTypeSize = 8 arraySizeSemantics = variableSize maxNumberOf Elements exists and value is greater than 0 (cf. TPS_DEXT_01002) arraySizeSemantics exists and is set to ArraySizeSemanticsEnum.variableSize (cf. TPS_DEXT_01002)
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStartRoutine
BSW 参数 DcmDspStartRoutineRoleRef ECUC-REFERENCE-DEF
BSW 类型 Reference to DcmDspAuthenticationRow that defines a role in that this routine can be started.
BSW 说明 This attribute allows for the specification of the position of the enclosing role in a bitfield of roles.
模板描述 DiagnosticExtract::Dcm::DiagnosticAuthRole. bitPosition
M2 参数 Applicable if the current access permission is referenced by DiagnosticStartRoutine. The value of DcmDspStartRoutineRole is calculated based on the bits of all referenced DiagnosticAuthRole.bit Position, where a value of 2ˆbitPosition is used for each DiagnosticAuthRole.bitPosition. The accumulated value represents a bitfield that has a bit set for each DiagnosticAuthRole.bitPosition.
映射规则 full
映射类型 valid
映射状态 [ECUC_Dcm_01144]
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine
BSW 参数 DcmDspStopRoutine
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 Provides the configuration of Stop subservice for RoutineControl service. Existence indicates that the StopRoutine in the RoutineControl is supported.
模板描述 DiagnosticRoutine.stop: This represents the ability to stop a running routine. DiagnosticRoutineNeeds.diagRoutineType: This denotes the type of diagnostic routine which is implemented by the referenced server port.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticRoutine. stop , CommonStructure::ServiceNeeds::DiagnosticRoutine Needs. diagRoutineType
映射规则 1:1 mapping for DiagnosticRoutine.stop
映射类型 full OR DiagnosticRoutineNeeds.diagRoutineType == asynchronous
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01022]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine
BSW 参数 DcmDspStopRoutineFnc
BSW 类型 ECUC-FUNCTION-NAME-DEF
BSW 说明 Function name for request to application to stop a routine. (Routine_Stop-function) This parameter is related to the interface Xxx_Stop.
模板描述 This is supposed to represent a reference to a BswServiceDependency. the latter is not derived from Referrable and therefore this detour needs to be implemented to still let BswServiceDependency become the target of a reference.
M2 参数 DiagnosticExtract::DiagnosticMapping::ServiceMapping::DiagnosticServiceSwMapping. mappedBswServiceDependency
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00752]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine
BSW 参数 DcmDspStopRoutineIn
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 Provide description of input parameter of Stop subservice for RoutineControl service.
模板描述 This represents the request parameters.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticStopRoutine. request
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00832]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn
BSW 参数 DcmDspStopRoutineInSignal
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 Provide description of a routine signal used in RoutineControl service. The ordering defined via the index attribute of the subcontainers in this list represents the order of the dataInN elements in the XXX_Stop function call.
模板描述 This represents the related dataElement of the DiagnosticParameter
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticAbstractParameter. dataElement
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00839]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignal/DcmDspArgumentScaling/DcmDspAlternativeDataType
BSW 参数 DcmDspTextTableMapping
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 The purpose of the DcmDspTextTableMapping is to associate a texttable value defined in the context of the Dcm to a texttable value defined in the context of a CompuMethod referenced by a DataType that shall be taken to create a dataElement in a SenderReceiverInterface. By this means it is possible to create a primitive version of a TexttableMapping (which can only be applied if a dataElement already exists). In other words, the DcmDspTextTableMapping provides a similar mechanism to the TexttableMapping in a situation where the TexttableMapping cannot be applied since the SenderReceiverInterface for the PortPrototype on the Dcm ServiceComponent does not yet exist. Template Description This meta-class represents the ability to express the relationship between a physical value and the mathematical representation. Note that this is still independent of the technical implementation in data types. It only specifies the formula how the internal value corresponds to its physical pendant. M2 Parameter AsamHdo::ComputationMethod:: CompuMethod This mapping applies if the CompuMethod.category is set to values TEXTTABLE or SCALE_ LINEAR_AND_TEXTTABLE.
映射规则 full
映射类型 valid
映射状态 [ECUC_Dcm_00999]
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignal/DcmDspArgumentScaling/DcmDspAlternativeDataType/DcmDspText TableMapping
BSW 参数 DcmDspDiagnosisRepresentationDataValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 The data value in the diagnosis representation.
模板描述 This represents a textual constant in the computation method.
M2 参数 AsamHdo::ComputationMethod::CompuConstTextContent. vt
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01001]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignal/DcmDspArgumentScaling/DcmDspAlternativeDataType/DcmDspText TableMapping
BSW 参数 DcmDspInternalDataValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 The ECU internal data value.
模板描述 CompuScale.lowerLimit: This specifies the lower limit of the scale. CompuScale.upperLimit: This specifies the upper limit of a of the scale.
M2 参数 AsamHdo::ComputationMethod::CompuScale. lowerLimit , AsamHdo::ComputationMethod::CompuScale. upperLimit
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01000]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignal
BSW 参数 DcmDspRoutineParameterSize
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Provide the size of a RoutineControl parameter in bytes
模板描述 The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements
映射规则 Only in case of variable length required (according to constr_6008). Calculation: DcmDspRoutine SignalLength = maxNumberOfElements * 8
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00841]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignal
BSW 参数 DcmDspRoutineSignalEndianness ECUC-ENUMERATION-PARAM-DEF
BSW 类型 Defines the endianness of the data belonging to a Routine In Signal for Stop subfunction.
BSW 说明 This attribute specifies the byte order of the base type.
模板描述 AsamHdo::BaseTypes::BaseTypeDirectDefinition. byteOrder
M2 参数 baseType.baseTypeDefinition.byteOrder referenced by swDataDefProps of the Diagnostic Parameter with the role DiagnosticStopRoutine.request
映射规则 full
映射类型 valid
映射状态 [ECUC_Dcm_01014]
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignal
BSW 参数 DcmDspRoutineSignalPos
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Provide the position of the signal in the RoutineControl request/response. The position is defined in bits.
模板描述 This represents the bitOffset of the DiagnosticParameter. The value of the bitOffset shall always be interpreted as relative to the start of the enclosing DiagnosticDataIdentifier, DiagnosticParameterIdentifier, or DiagnosticRoutineSubfunction.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticAbstractParameter. bitOffset
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00840]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 BOOLEAN
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is boolean.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.request baseTypeEncoding = BOOLEAN baseTypeSize = 1
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 FLOAT
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is float.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , CommonStructure::ServiceNeeds::DiagnosticValueNeeds. fixedLength baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements shall not exist arraySizeSemantics shall not exist Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 FLOAT_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is float array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , CommonStructure::ServiceNeeds::DiagnosticValueNeeds. fixedLength baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements shall not exist arraySizeSemantics shall not exist Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 SINT16
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint16.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop
映射规则 full
映射类型 Routine.request baseTypeEncoding = 2C baseTypeSize = 16
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 SINT16_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint16 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.request baseTypeEncoding = 2C baseTypeSize = 16 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either doesnot exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 SINT32
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint32. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.request baseTypeEncoding = 2C baseTypeSize = 32
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 SINT32_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF BSW Description Type of the signal is sint32 array. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.request baseTypeEncoding = 2C baseTypeSize = 32 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either doesnot exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 SINT8
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint8. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.request baseTypeEncoding = 2C baseTypeSize = 8
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 SINT8_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint8 array. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.request baseTypeEncoding = 2C baseTypeSize = 8 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 UINT16
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint16.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.request baseTypeEncoding = NONE, UTF-16 baseTypeSize = 16
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 UINT16_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint16 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.request baseTypeEncoding = NONE, UTF-16 baseTypeSize = 16 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 UINT32
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint32.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 baseTypeEncoding = NONE, UTF-32 baseTypeSize = 32
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 UINT32_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint32 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements baseTypeEncoding = NONE, UTF-32 baseTypeSize = 32 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 UINT8
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint8.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.request baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 UINT8_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint8 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.request baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_ DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 VARIABLE_LENGTH
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint8[DcmDspRoutineParameterSize]. This is only valid for the last signal and when DcmDspRoutineSignalType is set to VARIABLE_LENGTH. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics Mapping Rule Mapping Type referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.request baseTypeEncoding = NONE baseTypeSize = 8 arraySizeSemantics = variableSize maxNumberOf Elements exists and value is greater than 0 (cf. TPS_DEXT_01002) arraySizeSemantics exists and is set to ArraySizeSemanticsEnum.variableSize (cf. TPS_DEXT_01002) full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignalCompositePool
BSW 参数 DcmDspStopRoutineInSignal
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 Provide description of a routine signal used in RoutineControl service. The ordering defined via the index attribute of the subcontainers in this list represents the order of the dataInN elements in the XXX_Stop function call.
模板描述 This represents the related dataElement of the DiagnosticParameter
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticAbstractParameter. dataElement
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00839]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignalCompositePool/DcmDspStopRoutineInSignal/DcmDspArgumentScaling/ DcmDspAlternativeDataType
BSW 参数 DcmDspTextTableMapping
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 The purpose of the DcmDspTextTableMapping is to associate a texttable value defined in the context of the Dcm to a texttable value defined in the context of a CompuMethod referenced by a DataType that shall be taken to create a dataElement in a SenderReceiverInterface. By this means it is possible to create a primitive version of a TexttableMapping (which can only be applied if a dataElement already exists). In other words, the DcmDspTextTableMapping provides a similar mechanism to the TexttableMapping in a situation where the TexttableMapping cannot be applied since the SenderReceiverInterface for the PortPrototype on the Dcm ServiceComponent does not yet exist. Template Description This meta-class represents the ability to express the relationship between a physical value and the mathematical representation. Note that this is still independent of the technical implementation in data types. It only specifies the formula how the internal value corresponds to its physical pendant. M2 Parameter AsamHdo::ComputationMethod:: CompuMethod Mapping Rule Mapping Type This mapping applies if the CompuMethod.category is set to values TEXTTABLE or SCALE_ LINEAR_AND_TEXTTABLE. full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00999]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignalCompositePool/DcmDspStopRoutineInSignal/DcmDspArgumentScaling/ DcmDspAlternativeDataType/DcmDspTextTableMapping
BSW 参数 DcmDspDiagnosisRepresentationDataValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 The data value in the diagnosis representation.
模板描述 This represents a textual constant in the computation method.
M2 参数 AsamHdo::ComputationMethod::CompuConstTextContent. vt
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01001]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignalCompositePool/DcmDspStopRoutineInSignal/DcmDspArgumentScaling/ DcmDspAlternativeDataType/DcmDspTextTableMapping
BSW 参数 DcmDspInternalDataValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 The ECU internal data value.
模板描述 CompuScale.lowerLimit: This specifies the lower limit of the scale. CompuScale.upperLimit: This specifies the upper limit of a of the scale.
M2 参数 AsamHdo::ComputationMethod::CompuScale. lowerLimit , AsamHdo::ComputationMethod::CompuScale. upperLimit
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01000]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignalCompositePool/DcmDspStopRoutineInSignal
BSW 参数 DcmDspRoutineParameterSize
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Provide the size of a RoutineControl parameter in bytes
模板描述 The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements
映射规则 Only in case of variable length required (according to constr_6008). Calculation: DcmDspRoutine SignalLength = maxNumberOfElements * 8
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00841]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignalCompositePool/DcmDspStopRoutineInSignal BSW Parameter Type BSW DcmDspRoutineSignalEndianness ECUC-ENUMERATION-PARAM-DEF
BSW 说明 Defines the endianness of the data belonging to a Routine In Signal for Stop subfunction.
模板描述 This attribute specifies the byte order of the base type.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. byteOrder
映射规则 baseType.baseTypeDefinition.byteOrder referenced by swDataDefProps of the Diagnostic Parameter with the role DiagnosticStopRoutine.request
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01014]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignalCompositePool/DcmDspStopRoutineInSignal
BSW 参数 DcmDspRoutineSignalPos
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Provide the position of the signal in the RoutineControl request/response. The position is defined in bits.
模板描述 This represents the bitOffset of the DiagnosticParameter. The value of the bitOffset shall always be interpreted as relative to the start of the enclosing DiagnosticDataIdentifier, DiagnosticParameterIdentifier, or DiagnosticRoutineSubfunction.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticAbstractParameter. bitOffset
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00840]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignalCompositePool/DcmDspStopRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 BOOLEAN
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is boolean.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.request baseTypeEncoding = BOOLEAN baseTypeSize = 1
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignalCompositePool/DcmDspStopRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 FLOAT
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is float.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , CommonStructure::ServiceNeeds::DiagnosticValueNeeds. fixedLength baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements shall not exist arraySizeSemantics shall not exist Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignalCompositePool/DcmDspStopRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 FLOAT_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is float array. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , CommonStructure::ServiceNeeds::DiagnosticValueNeeds. fixedLength
映射规则 baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements shall not exist arraySizeSemantics shall not exist Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignalCompositePool/DcmDspStopRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 SINT16
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint16.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.request baseTypeEncoding = 2C baseTypeSize = 16
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignalCompositePool/DcmDspStopRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 SINT16_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint16 array. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.request baseTypeEncoding = 2C baseTypeSize = 16 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either doesnot exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignalCompositePool/DcmDspStopRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 SINT32
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint32.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.request
映射类型 full baseTypeEncoding = 2C baseTypeSize = 32
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignalCompositePool/DcmDspStopRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 SINT32_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint32 array. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.request baseTypeEncoding = 2C baseTypeSize = 32 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either doesnot exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignalCompositePool/DcmDspStopRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 SINT8
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint8.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.request baseTypeEncoding = 2C baseTypeSize = 8
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignalCompositePool/DcmDspStopRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 SINT8_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint8 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.request baseTypeEncoding = 2C baseTypeSize = 8 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignalCompositePool/DcmDspStopRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 UINT16
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint16.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.request baseTypeEncoding = NONE, UTF-16 baseTypeSize = 16
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignalCompositePool/DcmDspStopRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 UINT16_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint16 array. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.request baseTypeEncoding = NONE, UTF-16 baseTypeSize = 16 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignalCompositePool/DcmDspStopRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 UINT32
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint32.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 baseTypeEncoding = NONE, UTF-32 baseTypeSize = 32
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignalCompositePool/DcmDspStopRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 UINT32_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint32 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements baseTypeEncoding = NONE, UTF-32 baseTypeSize = 32 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignalCompositePool/DcmDspStopRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 UINT8
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF BSW Description Type of the signal is uint8. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.request baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignalCompositePool/DcmDspStopRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 UINT8_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint8 array. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.request baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_ DEXT_01001)
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineIn/Dcm DspStopRoutineInSignalCompositePool/DcmDspStopRoutineInSignal/DcmDspRoutineSignalType
BSW 参数 VARIABLE_LENGTH
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint8[DcmDspRoutineParameterSize]. This is only valid for the last signal and when DcmDspRoutineSignalType is set to VARIABLE_LENGTH.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.request baseTypeEncoding = NONE baseTypeSize = 8 arraySizeSemantics = variableSize maxNumberOf Elements exists and value is greater than 0 (cf. TPS_DEXT_01002) arraySizeSemantics exists and is set to ArraySizeSemanticsEnum.variableSize (cf. TPS_DEXT_01002)
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine
BSW 参数 DcmDspStopRoutineOut
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 Provide description of output parameter of Stop subservice for RoutineControl service.
模板描述 This represents the response parameters.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticStopRoutine. response
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00833]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut
BSW 参数 DcmDspStopRoutineOutSignal
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 Provide description of a routine signal used in RoutineControl service. The ordering defined via the index attribute of the subcontainers in this list represents the order of the dataOutN elements in the XXX_Stop function call.
模板描述 This represents the related dataElement of the DiagnosticParameter
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticAbstractParameter. dataElement
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00842]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignal/DcmDspArgumentScaling/DcmDspAlternativeDataType
BSW 参数 DcmDspTextTableMapping
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 The purpose of the DcmDspTextTableMapping is to associate a texttable value defined in the context of the Dcm to a texttable value defined in the context of a CompuMethod referenced by a DataType that shall be taken to create a dataElement in a SenderReceiverInterface. By this means it is possible to create a primitive version of a TexttableMapping (which can only be applied if a dataElement already exists). In other words, the DcmDspTextTableMapping provides a similar mechanism to the TexttableMapping in a situation where the TexttableMapping cannot be applied since the SenderReceiverInterface for the PortPrototype on the Dcm ServiceComponent does not yet exist. Template Description This meta-class represents the ability to express the relationship between a physical value and the mathematical representation. Note that this is still independent of the technical implementation in data types. It only specifies the formula how the internal value corresponds to its physical pendant. M2 Parameter AsamHdo::ComputationMethod:: CompuMethod
映射规则 This mapping applies if the CompuMethod.category is set to values TEXTTABLE or SCALE_ LINEAR_AND_TEXTTABLE.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00999]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignal/DcmDspArgumentScaling/DcmDspAlternativeDataType/DcmDsp TextTableMapping
BSW 参数 DcmDspDiagnosisRepresentationDataValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 The data value in the diagnosis representation.
模板描述 This represents a textual constant in the computation method.
M2 参数 AsamHdo::ComputationMethod::CompuConstTextContent. vt
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01001]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignal/DcmDspArgumentScaling/DcmDspAlternativeDataType/DcmDsp TextTableMapping
BSW 参数 DcmDspInternalDataValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 The ECU internal data value.
模板描述 CompuScale.lowerLimit: This specifies the lower limit of the scale. CompuScale.upperLimit: This specifies the upper limit of a of the scale.
M2 参数 AsamHdo::ComputationMethod::CompuScale. lowerLimit , AsamHdo::ComputationMethod::CompuScale. upperLimit
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01000]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignal
BSW 参数 DcmDspRoutineParameterSize
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Provide the size of a RoutineControl parameter in bytes
模板描述 The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements
映射规则 "Only in case of variable length required (according to constr_6008).
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00844]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignal
BSW 参数 DcmDspRoutineSignalEndianness ECUC-ENUMERATION-PARAM-DEF
BSW 类型 Defines the endianness of the data belonging to a Routine Out Signal for Stop subfunction.
BSW 说明 This attribute specifies the byte order of the base type.
模板描述 AsamHdo::BaseTypes::BaseTypeDirectDefinition. byteOrder
M2 参数 baseType.baseTypeDefinition.byteOrder referenced by swDataDefProps of the Diagnostic Parameter with the role DiagnosticStopRoutine.response
映射规则 full
映射类型 valid
映射状态 [ECUC_Dcm_01015]
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignal
BSW 参数 DcmDspRoutineSignalPos
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Provide the position of the signal in the RoutineControl request/response. The position is defined in bits.
模板描述 This represents the bitOffset of the DiagnosticParameter. The value of the bitOffset shall always be interpreted as relative to the start of the enclosing DiagnosticDataIdentifier, DiagnosticParameterIdentifier, or DiagnosticRoutineSubfunction.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticAbstractParameter. bitOffset
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00843]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignal/DcmDspRoutineSignalType
BSW 参数 BOOLEAN
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is boolean.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.response baseTypeEncoding = BOOLEAN baseTypeSize = 1
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignal/DcmDspRoutineSignalType
BSW 参数 FLOAT
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is float.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , CommonStructure::ServiceNeeds::DiagnosticValueNeeds. fixedLength baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements shall not exist arraySizeSemantics shall not exist Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignal/DcmDspRoutineSignalType
BSW 参数 FLOAT_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is float array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , CommonStructure::ServiceNeeds::DiagnosticValueNeeds. fixedLength baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements shall not exist arraySizeSemantics shall not exist Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignal/DcmDspRoutineSignalType
BSW 参数 SINT16
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint16.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop
映射规则 full
映射类型 Routine.response baseTypeEncoding = 2C baseTypeSize = 16
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignal/DcmDspRoutineSignalType
BSW 参数 SINT16_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint16 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.response baseTypeEncoding = 2C baseTypeSize = 16 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignal/DcmDspRoutineSignalType
BSW 参数 SINT32
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint32. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.response baseTypeEncoding = 2C baseTypeSize = 32
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignal/DcmDspRoutineSignalType
BSW 参数 SINT32_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF BSW Description Type of the signal is sint32 array. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.response baseTypeEncoding = 2C baseTypeSize = 32 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignal/DcmDspRoutineSignalType
BSW 参数 SINT8
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint8. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.response baseTypeEncoding = 2C baseTypeSize = 8
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignal/DcmDspRoutineSignalType
BSW 参数 SINT8_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint8 array. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition.
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.response baseTypeEncoding = 2C baseTypeSize = 8 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either doesnot exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignal/DcmDspRoutineSignalType
BSW 参数 UINT16
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint16.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.response baseTypeEncoding = NONE, UTF-16 baseTypeSize = 16
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignal/DcmDspRoutineSignalType
BSW 参数 UINT16_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint16 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.response baseTypeEncoding = NONE, UTF-16 baseTypeSize = 16 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignal/DcmDspRoutineSignalType
BSW 参数 UINT32
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint32.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.response baseTypeSize = 32
映射规则 full
映射类型 baseTypeEncoding = NONE, UTF-32 Mapping Status
ECUC 参数 ID valid
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignal/DcmDspRoutineSignalType
BSW 参数 UINT32_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint32 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.response baseTypeEncoding = NONE, UTF-32 baseTypeSize = 32 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignal/DcmDspRoutineSignalType
BSW 参数 UINT8
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint8.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.response baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignal/DcmDspRoutineSignalType
BSW 参数 UINT8_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint8 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.response baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_ DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignal/DcmDspRoutineSignalType
BSW 参数 VARIABLE_LENGTH
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint8[DcmDspRoutineParameterSize]. This is only valid for the last signal and when DcmDspRoutineSignalType is set to VARIABLE_LENGTH. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.response baseTypeEncoding = NONE baseTypeSize = 8 arraySizeSemantics = variableSize maxNumberOf Elements exists and value is greater than 0 (cf. TPS_DEXT_01002) arraySizeSemantics exists and is set to ArraySizeSemanticsEnum.variableSize (cf. TPS_DEXT_01002)
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignalCompositePool
BSW 参数 DcmDspStopRoutineOutSignal
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 Provide description of a routine signal used in RoutineControl service. The ordering defined via the index attribute of the subcontainers in this list represents the order of the dataOutN elements in the XXX_Stop function call.
模板描述 This represents the related dataElement of the DiagnosticParameter
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticAbstractParameter. dataElement
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00842]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignalCompositePool/DcmDspStopRoutineOutSignal/DcmDspArgument Scaling/DcmDspAlternativeDataType
BSW 参数 DcmDspTextTableMapping
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 The purpose of the DcmDspTextTableMapping is to associate a texttable value defined in the context of the Dcm to a texttable value defined in the context of a CompuMethod referenced by a DataType that shall be taken to create a dataElement in a SenderReceiverInterface. By this means it is possible to create a primitive version of a TexttableMapping (which can only be applied if a dataElement already exists). In other words, the DcmDspTextTableMapping provides a similar mechanism to the TexttableMapping in a situation where the TexttableMapping cannot be applied since the SenderReceiverInterface for the PortPrototype on the Dcm ServiceComponent does not yet exist. Template Description This meta-class represents the ability to express the relationship between a physical value and the mathematical representation. Note that this is still independent of the technical implementation in data types. It only specifies the formula how the internal value corresponds to its physical pendant.
M2 参数 AsamHdo::ComputationMethod:: CompuMethod
映射规则 This mapping applies if the CompuMethod.category is set to values TEXTTABLE or SCALE_ LINEAR_AND_TEXTTABLE.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00999]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignalCompositePool/DcmDspStopRoutineOutSignal/DcmDspArgument Scaling/DcmDspAlternativeDataType/DcmDspTextTableMapping
BSW 参数 DcmDspDiagnosisRepresentationDataValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 The data value in the diagnosis representation.
模板描述 This represents a textual constant in the computation method.
M2 参数 AsamHdo::ComputationMethod::CompuConstTextContent. vt
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01001]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignalCompositePool/DcmDspStopRoutineOutSignal/DcmDspArgument Scaling/DcmDspAlternativeDataType/DcmDspTextTableMapping
BSW 参数 DcmDspInternalDataValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 The ECU internal data value.
模板描述 CompuScale.lowerLimit: This specifies the lower limit of the scale. CompuScale.upperLimit: This specifies the upper limit of a of the scale.
M2 参数 AsamHdo::ComputationMethod::CompuScale. lowerLimit , AsamHdo::ComputationMethod::CompuScale. upperLimit
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01000]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignalCompositePool/DcmDspStopRoutineOutSignal
BSW 参数 DcmDspRoutineParameterSize
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Provide the size of a RoutineControl parameter in bytes
模板描述 The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements
映射规则 "Only in case of variable length required (according to constr_6008). Calculation: DcmDspRoutineSignalLength = maxNumberOfElements * 8
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00844]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignalCompositePool/DcmDspStopRoutineOutSignal
BSW 参数 DcmDspRoutineSignalEndianness ECUC-ENUMERATION-PARAM-DEF
BSW 类型 Defines the endianness of the data belonging to a Routine Out Signal for Stop subfunction.
BSW 说明 This attribute specifies the byte order of the base type.
模板描述 AsamHdo::BaseTypes::BaseTypeDirectDefinition. byteOrder
M2 参数 baseType.baseTypeDefinition.byteOrder referenced by swDataDefProps of the Diagnostic Parameter with the role DiagnosticStopRoutine.response
映射规则 full
映射类型 valid
映射状态 [ECUC_Dcm_01015]
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignalCompositePool/DcmDspStopRoutineOutSignal
BSW 参数 DcmDspRoutineSignalPos
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Provide the position of the signal in the RoutineControl request/response. The position is defined in bits.
模板描述 This represents the bitOffset of the DiagnosticParameter. The value of the bitOffset shall always be interpreted as relative to the start of the enclosing DiagnosticDataIdentifier, DiagnosticParameterIdentifier, or DiagnosticRoutineSubfunction.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticAbstractParameter. bitOffset
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00843]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignalCompositePool/DcmDspStopRoutineOutSignal/DcmDspRoutine SignalType
BSW 参数 BOOLEAN
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is boolean.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.response baseTypeEncoding = BOOLEAN baseTypeSize = 1
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignalCompositePool/DcmDspStopRoutineOutSignal/DcmDspRoutine SignalType
BSW 参数 FLOAT
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is float.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , CommonStructure::ServiceNeeds::DiagnosticValueNeeds. fixedLength
映射规则 baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements shall not exist arraySizeSemantics shall not exist Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignalCompositePool/DcmDspStopRoutineOutSignal/DcmDspRoutine SignalType
BSW 参数 FLOAT_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is float array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , CommonStructure::ServiceNeeds::DiagnosticValueNeeds. fixedLength
映射规则 baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements shall not exist arraySizeSemantics shall not exist Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignalCompositePool/DcmDspStopRoutineOutSignal/DcmDspRoutine SignalType
BSW 参数 SINT16
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint16.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.response baseTypeEncoding = 2C baseTypeSize = 16
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignalCompositePool/DcmDspStopRoutineOutSignal/DcmDspRoutine SignalType
BSW 参数 SINT16_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint16 array. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.response baseTypeEncoding = 2C baseTypeSize = 16 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignalCompositePool/DcmDspStopRoutineOutSignal/DcmDspRoutine SignalType
BSW 参数 SINT32
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint32.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.response baseTypeEncoding = 2C baseTypeSize = 32
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignalCompositePool/DcmDspStopRoutineOutSignal/DcmDspRoutine SignalType
BSW 参数 SINT32_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint32 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.response baseTypeEncoding = 2C baseTypeSize = 32 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignalCompositePool/DcmDspStopRoutineOutSignal/DcmDspRoutine SignalType
BSW 参数 SINT8
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint8.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.response baseTypeEncoding = 2C baseTypeSize = 8
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignalCompositePool/DcmDspStopRoutineOutSignal/DcmDspRoutine SignalType
BSW 参数 SINT8_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is sint8 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics Mapping Rule Mapping Type referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.response baseTypeEncoding = 2C baseTypeSize = 8 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either doesnot exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001) full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignalCompositePool/DcmDspStopRoutineOutSignal/DcmDspRoutine SignalType
BSW 参数 UINT16
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint16.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.response baseTypeEncoding = NONE, UTF-16 baseTypeSize = 16
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignalCompositePool/DcmDspStopRoutineOutSignal/DcmDspRoutine SignalType
BSW 参数 UINT16_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint16 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.response baseTypeEncoding = NONE, UTF-16 baseTypeSize = 16 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignalCompositePool/DcmDspStopRoutineOutSignal/DcmDspRoutine SignalType
BSW 参数 UINT32
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint32. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.response baseTypeEncoding = NONE, UTF-32 baseTypeSize = 32
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignalCompositePool/DcmDspStopRoutineOutSignal/DcmDspRoutine SignalType
BSW 参数 UINT32_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint32 array. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.response baseTypeEncoding = NONE, UTF-32 baseTypeSize = 32 maxNumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignalCompositePool/DcmDspStopRoutineOutSignal/DcmDspRoutine SignalType
BSW 参数 UINT8
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint8.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.response baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignalCompositePool/DcmDspStopRoutineOutSignal/DcmDspRoutine SignalType
BSW 参数 UINT8_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint8 array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.response baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements exists and value is greater than 0 (cf. TPS_DEXT_01001) arraySizeSemantics either does not exist or exists and is set to ArraySizeSemanticsEnum.fixedSize (cf. TPS_ DEXT_01001)
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine/DcmDspStopRoutineOut/ DcmDspStopRoutineOutSignalCompositePool/DcmDspStopRoutineOutSignal/DcmDspRoutine SignalType
BSW 参数 VARIABLE_LENGTH
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the signal is uint8[DcmDspRoutineParameterSize]. This is only valid for the last signal and when DcmDspRoutineSignalType is set to VARIABLE_LENGTH. Template Description BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticDataElement.maxNumberOfElements: The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take. DiagnosticDataElement.arraySizeSemantics: This attribute controls the meaning of the value of the array size.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements , Diagnostic Extract::CommonDiagnostics::DiagnosticDataElement. arraySizeSemantics
映射规则 referenced by swDataDefProps of the DiagnosticParameter with the role DiagnosticStop Routine.response baseTypeEncoding = NONE baseTypeSize = 8 arraySizeSemantics = variableSize maxNumberOf Elements exists and value is greater than 0 (cf. TPS_DEXT_01002) arraySizeSemantics exists and is set to ArraySizeSemanticsEnum.variableSize (cf. TPS_DEXT_01002)
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspRoutine/DcmDspStopRoutine BSW Parameter BSW Type DcmDspStopRoutineRoleRef ECUC-REFERENCE-DEF
BSW 说明 Reference to DcmDspAuthenticationRow that defines a role in that this routine can be stopped.
模板描述 This attribute allows for the specification of the position of the enclosing role in a bitfield of roles.
M2 参数 DiagnosticExtract::Dcm::DiagnosticAuthRole. bitPosition
映射规则 Applicable if the current access permission is referenced by DiagnosticStopRoutine. The value of DcmDspStopRoutineRole is calculated based on the bits of all referenced DiagnosticAuthRole.bit Position, where a value of 2ˆbitPosition is used for each DiagnosticAuthRole.bitPosition. The accumulated value represents a bitfield that has a bit set for each DiagnosticAuthRole.bitPosition.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01145]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspSecurity/DcmDspSecurityRow
BSW 参数 DcmDspSecurityADRSize
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Size in bytes of the AccessDataRecord used in GetSeed
模板描述 This represents the size of the AccessDataRecord used in GetSeed. Unit:byte.
M2 参数 DiagnosticExtract::Dcm::DiagnosticSecurityLevel. accessDataRecordSize
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00725]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspSecurity/DcmDspSecurityRow
BSW 参数 DcmDspSecurityAttemptCounterEnabled
BSW 类型 ECUC-BOOLEAN-PARAM-DEF
BSW 说明 This configuration parameter controls the existence of the APIs to set / get the attempt counter values towards application (Xxx_SetSecurityAttemptCounter() / Xxx_GetSecurityAttemptCounter()). In case of enabled, the security attempt counter values are passed to application, whenever there is a change in the value. This allows storing the values in nonvolatile RAM and restoring them at ECU startup.
模板描述 This is supposed to represent a reference to a BswServiceDependency. the latter is not derived from Referrable and therefore this detour needs to be implemented to still let BswServiceDependency become the target of a reference.
M2 参数 DiagnosticExtract::DiagnosticMapping::ServiceMapping::DiagnosticServiceSwMapping. mappedBswServiceDependency
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01050]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspSecurity/DcmDspSecurityRow
BSW 参数 DcmDspSecurityCompareKeyFnc
BSW 类型 ECUC-FUNCTION-NAME-DEF
BSW 说明 Function name to request the result of a key comparison. Parameter is only relevant if DcmDspSecurityUsePort=="USE_ ASYNCH_FNC". This parameter is related to the interface Xxx_CompareKey.
模板描述 This is supposed to represent a reference to a BswServiceDependency. the latter is not derived from Referrable and therefore this detour needs to be implemented to still let BswServiceDependency become the target of a reference.
M2 参数 DiagnosticExtract::DiagnosticMapping::ServiceMapping::DiagnosticServiceSwMapping. mappedBswServiceDependency
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00969]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspSecurity/DcmDspSecurityRow
BSW 参数 DcmDspSecurityDelayTime
BSW 类型 ECUC-FLOAT-PARAM-DEF
BSW 说明 Delay time after failed security access in seconds. This is started after DcmDspSecurityNumAttDelay number of failed security accesses. min: A negative value is not allowed.
模板描述 This represents the delay time after a failed security access. Unit: second.
M2 参数 DiagnosticExtract::Dcm::DiagnosticSecurityLevel. securityDelayTime
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00757]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspSecurity/DcmDspSecurityRow
BSW 参数 DcmDspSecurityDelayTimeOnBoot
BSW 类型 ECUC-FLOAT-PARAM-DEF
BSW 说明 Value of the delay timer in case of 'power on' in seconds. This delay indicates the time at ECU boot power-on time during which the Dcm does not accept a security access. min: A negative value is not allowed.
模板描述 Start delay timer on power on in seconds. This delay indicates the time after ECU boot power-on where no security access request is accepted.
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::SecurityAccess::DiagnosticSecurityAccess. securityDelayTimeOnBoot
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00726]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspSecurity/DcmDspSecurityRow
BSW 参数 DcmDspSecurityGetAttemptCounterFnc
BSW 类型 ECUC-FUNCTION-NAME-DEF
BSW 说明 Function name to request the value of an attempt counter. This parameter is related to the interface Xxx_ GetSecurityAttempt Counter.
模板描述 This is supposed to represent a reference to a BswServiceDependency. the latter is not derived from Referrable and therefore this detour needs to be implemented to still let BswServiceDependency become the target of a reference.
M2 参数 DiagnosticExtract::DiagnosticMapping::ServiceMapping::DiagnosticServiceSwMapping. mappedBswServiceDependency
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01048]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspSecurity/DcmDspSecurityRow
BSW 参数 DcmDspSecurityGetSeedFnc ECUC-FUNCTION-NAME-DEF
BSW 类型 Callout function name used to request a seed. This parameter is related to the interface Xxx_GetSeed.
BSW 说明 This is supposed to represent a reference to a BswServiceDependency. the latter is not derived from Referrable and therefore this detour needs to be implemented to still let BswServiceDependency become the target of a reference.
模板描述 DiagnosticExtract::DiagnosticMapping::ServiceMapping::DiagnosticServiceSwMapping. mappedBswServiceDependency
M2 参数 1:1 mapping
映射规则 full
映射类型 valid
映射状态 [ECUC_Dcm_00968]
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspSecurity/DcmDspSecurityRow
BSW 参数 DcmDspSecurityKeySize
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 size of the security key (in Bytes).
模板描述 This represents the size of the security key. Unit: byte.
M2 参数 DiagnosticExtract::Dcm::DiagnosticSecurityLevel. keySize
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00760]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspSecurity/DcmDspSecurityRow
BSW 参数 DcmDspSecurityLevel
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Value of Security level. The locked state cannot be configured explicitly. 1,2,3...63: configuration dependent - Conversion formula to calculate SecurityLevel out of tester requested SecurityAccessType parameter: SecurityLevel = (SecurityAccessType (requestSeed) + 1) / 2 Type: Dcm_SecLevelType
模板描述 This would be 0x01, 0x03, 0x05, ... The sendKey id can be computed by adding 1 to the requestSeedId
M2 参数 Document ID 673: AUTOSAR_CP_TPS_DiagnosticExtractTemplate DiagnosticExtract::Dcm::DiagnosticService::SecurityAccess::DiagnosticSecurityAccess. requestSeedId
映射规则 DcmDspSecurityLevel=(requestSeedId+1)/2
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00754]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspSecurity/DcmDspSecurityRow
BSW 参数 DcmDspSecurityNumAttDelay
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Number of failed security accesses after which the delay time is activated
模板描述 This represents the number of failed security accesses after which the delay time is activated.
M2 参数 DiagnosticExtract::Dcm::DiagnosticSecurityLevel. numFailedSecurityAccess
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00762]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspSecurity/DcmDspSecurityRow
BSW 参数 DcmDspSecuritySeedSize
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 size of the security seed (in Bytes).
模板描述 This represents the size of the security seed. Unit: byte.
M2 参数 DiagnosticExtract::Dcm::DiagnosticSecurityLevel. seedSize
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00755]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspSecurity/DcmDspSecurityRow
BSW 参数 DcmDspSecuritySetAttemptCounterFnc
BSW 类型 ECUC-FUNCTION-NAME-DEF
BSW 说明 Function name to set the value of an attempt counter. This parameter is related to the interface Xxx_ SetSecurityAttempt Counter.
模板描述 This is supposed to represent a reference to a BswServiceDependency. the latter is not derived from Referrable and therefore this detour needs to be implemented to still let BswServiceDependency become the target of a reference.
M2 参数 DiagnosticExtract::DiagnosticMapping::ServiceMapping::DiagnosticServiceSwMapping. mappedBswServiceDependency
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01049]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspSecurity/DcmDspSecurityRow/DcmDspSecurityUsePort
BSW 参数 USE_ASYNCH_CLIENT_SERVER
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 The DCM will access the data using an R-Port requiring a asynchronous ClientServertInterface SecurityAccess_{Security Level}. The R-Port is described in DcmDspSecurityRow description.
模板描述 This represents the ability to point into the component hierarchy (under possible consideration of the rootSoftware Composition)
M2 参数 DiagnosticExtract::DiagnosticMapping::ServiceMapping::DiagnosticServiceSwMapping. mappedSwcServiceDependencyInSystem
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspSecurity/DcmDspSecurityRow/DcmDspSecurityUsePort
BSW 参数 USE_ASYNCH_FNC
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 The DCM will access the data using the functions that are defined in the parameters DcmDspSecurityGetSeedFnc and Dcm DspSecurityCompareKeyFnc as well as the functions defined in DcmDspSecurityGetAttemptCounterFnc and DcmDsp SecuritySetAttemptCounterFnc, if enabled by the parameter DcmDspSecurityAttemptCounterEnabled. DCM_E_PENDING return is allowed and OpStatus is existing as IN parameter.
模板描述 This represents the ability to point into the component hierarchy (under possible consideration of the rootSoftware Composition)
M2 参数 DiagnosticExtract::DiagnosticMapping::ServiceMapping::DiagnosticServiceSwMapping. mappedSwcServiceDependencyInSystem
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspSession/DcmDspSessionRow/DcmDspSessionForBoot
BSW 参数 DCM_NO_BOOT
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 This diagnostic session doesn't allow to jump to Bootloader.
模板描述 This diagnostic session doesn't allow to jump to Bootloader.
M2 参数 DiagnosticExtract::Dcm::DiagnosticJumpToBootLoaderEnum. noBoot
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspSession/DcmDspSessionRow/DcmDspSessionForBoot
BSW 参数 DCM_OEM_BOOT
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 This diagnostic session allows to jump to OEM Bootloader and bootloader sends final response.
模板描述 This diagnostic session allows to jump to OEM Bootloader. In this case the bootloader send the final response.
M2 参数 DiagnosticExtract::Dcm::DiagnosticJumpToBootLoaderEnum. oemBoot
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspSession/DcmDspSessionRow/DcmDspSessionForBoot
BSW 参数 DCM_OEM_BOOT_RESPAPP
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 This diagnostic session allows to jump to OEM Bootloader and application sends final response.
模板描述 This diagnostic session allows to jump to OEM Bootloader and application sends final response.
M2 参数 DiagnosticExtract::Dcm::DiagnosticJumpToBootLoaderEnum. oemBootRespApp
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspSession/DcmDspSessionRow/DcmDspSessionForBoot
BSW 参数 DCM_SYS_BOOT
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 This diagnostic session allows to jump to System Supplier Bootloader and bootloader sends final response.
模板描述 This diagnostic session allows to jump to System Supplier Bootloader. In this case the bootloader send the final response.
M2 参数 DiagnosticExtract::Dcm::DiagnosticJumpToBootLoaderEnum. systemSupplierBoot
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspSession/DcmDspSessionRow/DcmDspSessionForBoot
BSW 参数 DCM_SYS_BOOT_RESPAPP
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 This diagnostic session allows to jump to System Supplier Bootloader and application sends final response.
模板描述 This diagnostic session allows to jump to System Supplier Bootloader and application sends final response.
M2 参数 DiagnosticExtract::Dcm::DiagnosticJumpToBootLoaderEnum. systemSupplierBootRespApp
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspSession/DcmDspSessionRow BSW Parameter BSW Type DcmDspSessionLevel ECUC-INTEGER-PARAM-DEF
BSW 说明 subFunction value of the DiagnosticSession. 0, 127 and all values above 127 are reserved by ISO
模板描述 This is the numerical identifier used to identify the DiagnosticSession in the scope of diagnostic workflow
M2 参数 DiagnosticExtract::Dcm::DiagnosticSession. id
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00765]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspSession/DcmDspSessionRow
BSW 参数 DcmDspSessionP2ServerMax
BSW 类型 ECUC-FLOAT-PARAM-DEF
BSW 说明 This is the session value for P2ServerMax in seconds (per Session). The AUTOSAR configuration standard is to use SI units, so this parameter is defined as a float value in seconds. DCM configuration tools must convert this float value to the appropriate value format for the use in the software implementation of DCM. This value is reported to the tester within the response to the 'Session Control' service.
模板描述 This is the session value for P2ServerMax in seconds (per Session Control). The AUTOSAR configuration standard is to use SI units, so this parameter is defined as a float value in seconds.
M2 参数 DiagnosticExtract::Dcm::DiagnosticSession. p2ServerMax
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00766]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspSession/DcmDspSessionRow
BSW 参数 DcmDspSessionP2StarServerMax
BSW 类型 ECUC-FLOAT-PARAM-DEF
BSW 说明 This is the session value for P2*ServerMax in seconds (per Session). The AUTOSAR configuration standard is to use SI units, so this parameter is defined as a float value in seconds. DCM configuration tools must convert this float value to the appropriate value format for the use in the software implementation of DCM. This value is reported to the tester within the response to the 'Session Control' service.
模板描述 This is the session value for P2*ServerMax in seconds (per Session Control). The AUTOSAR configuration standard is to use SI units, so this parameter is defined as a float value in seconds.
M2 参数 DiagnosticExtract::Dcm::DiagnosticSession. p2StarServerMax
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00768]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp
BSW 参数 DcmDspVehInfo
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 This container contains the configuration (parameters) for one single VehicleInfoType of service $09
模板描述 This meta-class represents the ability to model an instance of the OBD mode 0x09 service.
M2 参数 DiagnosticExtract::Dcm::ObdService::Mode_0x09_RequestVehicleInformation:: DiagnosticRequestVehicleInfo
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00630]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspVehInfo
BSW 参数 DcmDspVehInfoData
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 Data Item of an InfoType; ShortName is post-fix of the port interface name.
模板描述 This meta-class represents the ability to describe a concrete piece of data to be taken into account for diagnostic purposes.
M2 参数 DiagnosticExtract::CommonDiagnostics:: DiagnosticDataElement
映射规则 The value shall be taken from DiagnosticRequestVehicleInfo.infoType.dataElement.dataElement.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00888]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspVehInfo/DcmDspVehInfoData
BSW 参数 DcmDspVehInfoDataOrder
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Defines the order of the data item in the InfoType; values: 0..255; first data item having the order number 0; the next 1 and so on. The configuration of order needs to be unique per InfoType.
模板描述 This represents the bitOffset of the DiagnosticParameter. The value of the bitOffset shall always be interpreted as relative to the start of the enclosing DiagnosticDataIdentifier, DiagnosticParameterIdentifier, or DiagnosticRoutineSubfunction.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticParameter. bitOffset
映射规则 Value shall be taken from DiagnosticRequestVehicleInfo.infoType.dataElement.bitOffset.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00891]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspVehInfo/DcmDspVehInfoData
BSW 参数 DcmDspVehInfoDataReadFnc
BSW 类型 ECUC-FUNCTION-NAME-DEF
BSW 说明 Callout function name for reading InfoType data item. Only required in case parameter 'DcmDspVehInfoDataUsePort' is set to 'false'
模板描述 This is supposed to represent a reference to a BswServiceDependency. the latter is not derived from Referrable and therefore this detour needs to be implemented to still let BswServiceDependency become the target of a reference.
M2 参数 DiagnosticExtract::DiagnosticMapping::ServiceMapping::DiagnosticServiceSwMapping. mappedBswServiceDependency
映射规则 The BswServiceDependency should have aRoleBasedBswModuleEntryAssignment that in turn has attribute role set to Xxx_GetInfotypeValueData and points to a BswModuleEntry.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00889]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspVehInfo/DcmDspVehInfoData
BSW 参数 DcmDspVehInfoDataSize
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Size in bytes of the InfoType data item.
模板描述 The existence of this attribute turns the data instance into an array of data. The attribute determines the size of the array in terms of how many elements the array can take.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticDataElement. maxNumberOfElements
映射规则 Value shall be taken from DiagnosticRequestVehicleInfo.infoType.dataElement.dataElement.max NumberOfElements.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00890]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspVehInfo/DcmDspVehInfoData
BSW 参数 DcmDspVehInfoDataUsePort
BSW 类型 ECUC-BOOLEAN-PARAM-DEF
BSW 说明 When this parameter is set to true the DCM will access the Data using an R-Port requiring a PortInterface IInfotype Services_{VehInfoData}. The R-Port is named InfotypeServices_{VehInfoData} where {VEHINFODATA} is the name of the container DcmDspVehInfoData. In that case, the DcmDspVehInfoDataReadFnc is ignored and the RTE APIs are used. When this parameter is set to false, the DCM calls the function defined in DcmDspVehInfoDataReadFnc. Template Description DiagnosticServiceSwMapping.mappedBswServiceDependency: This is supposed to represent a reference to a BswServiceDependency. the latter is not derived from Referrable and therefore this detour needs to be implemented to still let BswServiceDependency become the target of a reference. DiagnosticServiceSwMapping.mappedSwcServiceDependencyInSystem: This represents the ability to point into the component hierarchy (under possible consideration of the rootSoftware Composition) DiagnosticExtract::DiagnosticMapping::ServiceMapping::DiagnosticServiceSwMapping. mappedBswServiceDependency , DiagnosticExtract::DiagnosticMapping::ServiceMapping::DiagnosticServiceSwMapping. mappedSwcServiceDependencyInSystem
M2 参数 Shall be set to TRUE if the reference DiagnosticServiceSwMapping.mappedSwcService Dependency exists. Shall be set to FALSE if the reference DiagnosticServiceSwMapping.mapped BswServiceDependency exists.
映射规则 full
映射类型 valid
映射状态 [ECUC_Dcm_00727]
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmDsp/DcmDspVehInfo
BSW 参数 DcmDspVehInfoInfoType
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 value of InfoType. Within each DcmConfigSet all DcmDspVehInfoInfoType values shall be unique.
模板描述 This attribute represents the value of InfoType (see SAE J1979-DA).
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticInfoType. id
映射规则 If DiagnosticRequestVehicleInfo, us DiagnosticRequestVehicleInfo.infoType.id.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00631]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmProcessingConditions
BSW 参数 DcmModeCondition
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 This container contains the configuration of a mode condition or an environmental conditions which can be used as argument in DcmModeRules. One DcmModeCondition shall contain either one DcmSwcModeRef or one DcmBswModeRef or one DcmSwcSRData ElementRef. Please note that the Dcm acts as well as mode manager. Therefore the references DcmSwcModeRef or one DcmBswMode Ref. might point to provided ModeDeclarationGroupPrototypes of the Dcm itself as well as to provided ModeDeclaration GroupPrototypes of other Bsw Modules or software components. In case of a configured DcmSwcModeRef or DcmBswModeRef only the DcmConditionType DCM_EQUALS or DCM_ EQUALS_NOT are applicable. In case of DcmSwcSRDataElementRef all literals of DcmConditionType are possible. Template Description DiagnosticCompareConditions are atomic conditions. They are based on the idea of a comparison at runtime of some variable data with something constant. The type of the comparison (==, !=, <, <=, ...) is specified in DiagnosticCompare Condition.compareType. M2 Parameter DiagnosticExtract::Dcm::EnvironmentalCondition:: DiagnosticEnvCompareCondition
映射规则 Depending on the reference a DcmModeCondition is mapped to a DiagnosticEnvModeCondition if only one reference is present and reference is a DcmSwcModeRef or a DcmBswModeRef. If two references are present, a DcmSwcSRDataElementRef and a DcmSwcSRDataElementValueRef, then DcmModeCondition is mapped to a DiagnosticEnvDataCondition.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00928]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmProcessingConditions/DcmModeCondition
BSW 参数 DcmBswModeRef
BSW 类型 ECUC-INSTANCE-REFERENCE-DEF
BSW 说明 This parameter references a mode of a ModeDeclarationGroupPrototype provided by a Basic Software Module used for the condition. Please note that such ModeDeclarationGroupPrototype are owned by a Basic Software Module Description in the role providedModeGroup. Template Description This reference represents both the ModeDeclarationGroupPrototype and the ModeDeclaration relevant for the mode comparison. M2 Parameter DiagnosticExtract::Dcm::EnvironmentalCondition::DiagnosticEnvModeCondition. modeElement
映射规则 For DcmModeRef a new DiagnosticEnvBswModeElement is used, pointing to the ModeDeclaration via ModeInModuleDescriptionInstanceRef. This new DiagnosticEnvModeElement shall be aggregated by the same DiagnosticEnvironmentalConfition as the DiagnosticEnvModeCondition, in which the target of the reference DiagnosticEnvModeCondition.modeElement points to the this DiagnosticEnvModeElement.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00931]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmProcessingConditions/DcmModeCondition/DcmConditionType
BSW 参数 DCM_EQUALS
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 DiagnosticCompareTypeEnum.isEqual: equal DiagnosticEnvCompareCondition.compareType: This attributes represents the concrete type of the comparison.
模板描述 DiagnosticExtract::Dcm::EnvironmentalCondition::DiagnosticCompareTypeEnum. isEqual , Diagnostic Extract::Dcm::EnvironmentalCondition::DiagnosticEnvCompareCondition. compareType
M2 参数 1:1 mapping
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmProcessingConditions/DcmModeCondition/DcmConditionType
BSW 参数 DCM_EQUALS_NOT
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 DiagnosticCompareTypeEnum.isNotEqual: not equal DiagnosticEnvCompareCondition.compareType: This attributes represents the concrete type of the comparison.
模板描述 DiagnosticExtract::Dcm::EnvironmentalCondition::DiagnosticCompareTypeEnum. isNotEqual , Diagnostic Extract::Dcm::EnvironmentalCondition::DiagnosticEnvCompareCondition. compareType
M2 参数 1:1 mapping
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmProcessingConditions/DcmModeCondition/DcmConditionType
BSW 参数 DCM_GREATER_OR_EQUAL
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 DiagnosticCompareTypeEnum.isGreaterOrEqual: greater than or equal DiagnosticEnvCompareCondition.compareType: This attributes represents the concrete type of the comparison.
模板描述 DiagnosticExtract::Dcm::EnvironmentalCondition::DiagnosticCompareTypeEnum. isGreaterOrEqual , Diagnostic Extract::Dcm::EnvironmentalCondition::DiagnosticEnvCompareCondition. compareType
M2 参数 1:1 mapping
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmProcessingConditions/DcmModeCondition/DcmConditionType
BSW 参数 DCM_GREATER_THAN
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 DiagnosticCompareTypeEnum.isGreaterThan: greater than DiagnosticEnvCompareCondition.compareType: This attributes represents the concrete type of the comparison.
模板描述 DiagnosticExtract::Dcm::EnvironmentalCondition::DiagnosticCompareTypeEnum. isGreaterThan , Diagnostic Extract::Dcm::EnvironmentalCondition::DiagnosticEnvCompareCondition. compareType
M2 参数 1:1 mapping
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmProcessingConditions/DcmModeCondition/DcmConditionType
BSW 参数 DCM_LESS_OR_EQUAL
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 DiagnosticCompareTypeEnum.isLessOrEqual: less than or equal DiagnosticEnvCompareCondition.compareType: This attributes represents the concrete type of the comparison.
模板描述 DiagnosticExtract::Dcm::EnvironmentalCondition::DiagnosticCompareTypeEnum. isLessOrEqual , Diagnostic Extract::Dcm::EnvironmentalCondition::DiagnosticEnvCompareCondition. compareType
M2 参数 1:1 mapping
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmProcessingConditions/DcmModeCondition/DcmConditionType
BSW 参数 DCM_LESS_THAN
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 DiagnosticCompareTypeEnum.isLessThan: less than DiagnosticEnvCompareCondition.compareType: This attributes represents the concrete type of the comparison.
模板描述 DiagnosticExtract::Dcm::EnvironmentalCondition::DiagnosticCompareTypeEnum. isLessThan , Diagnostic Extract::Dcm::EnvironmentalCondition::DiagnosticEnvCompareCondition. compareType
M2 参数 1:1 mapping
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmProcessingConditions/DcmModeCondition/DcmSwcDataElementValue/ DcmSwcDataElementArray/DcmSwcDataElementArrayElement
BSW 参数 DcmSwcDataElementArrayElementIndex
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Index to an element of the compare value array.
模板描述 This attribute represents a fixed compare value taken to evaluate the compare condition.
M2 参数 DiagnosticExtract::Dcm::EnvironmentalCondition::DiagnosticEnvDataCondition. compareValue
映射规则 DiagnosticDataElement referenced by the DiagnosticEnvDataCondition is an array.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01127]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmProcessingConditions/DcmModeCondition/DcmSwcDataElementValue/ DcmSwcDataElementArray/DcmSwcDataElementArrayElement
BSW 参数 DcmSwcDataElementArrayElementValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Value of an array element compare value.
模板描述 This attribute represents a fixed compare value taken to evaluate the compare condition.
M2 参数 DiagnosticExtract::Dcm::EnvironmentalCondition::DiagnosticEnvDataCondition. compareValue
映射规则 DiagnosticDataElement referenced by the DiagnosticEnvDataCondition is an array.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01128]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmProcessingConditions/DcmModeCondition/DcmSwcDataElementValue/ DcmSwcDataElementPrimitive
BSW 参数 DcmSwcDataElementPrimitiveValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Primitive compare value.
模板描述 This attribute represents a fixed compare value taken to evaluate the compare condition.
M2 参数 DiagnosticExtract::Dcm::EnvironmentalCondition::DiagnosticEnvDataCondition. compareValue
映射规则 DiagnosticDataElement referenced by the DiagnosticEnvDataCondition is primitive.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01126]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmProcessingConditions/DcmModeCondition
BSW 参数 DcmSwcModeRef
BSW 类型 ECUC-INSTANCE-REFERENCE-DEF
BSW 说明 This parameter references a mode in a particular mode request port of a software component that is used for the condition.
模板描述 This reference represents both the ModeDeclarationGroupPrototype and the ModeDeclaration relevant for the mode comparison.
M2 参数 DiagnosticExtract::Dcm::EnvironmentalCondition::DiagnosticEnvModeCondition. modeElement
映射规则 For DcmModeRef a new DiagnosticEnvSwcModeElement is used, pointing to the ModeDeclaration via PModeInSystemInstanceRef. This new DiagnosticEnvModeElement shall be aggregated by the same DiagnosticEnvironmentalConfition as the DiagnosticEnvModeCondition, in which the target of the reference DiagnosticEnvModeCondition.modeElement points to the this DiagnosticEnvMode Element.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00930]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmProcessingConditions/DcmModeCondition
BSW 参数 DcmSwcSRDataElementRef
BSW 类型 ECUC-CHOICE-REFERENCE-DEF
BSW 说明 Reference to environmental conditions. It is possible to reference a S/R Receiver-Port to read physical values and compare (equal, greater, less,...) them with a configured value that is defined by DcmSwcDataElementValue.
模板描述 This reference represents the related diagnostic data element.
M2 参数 DiagnosticExtract::Dcm::EnvironmentalCondition::DiagnosticEnvDataCondition. dataElement
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01037]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmProcessingConditions
BSW 参数 DcmModeRule
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF BSW Description This container contains the configuration of a mode rule which represents a logical expression with DcmModeConditions or other DcmModeRules as arguments. All arguments are processed with the operator defined by DcmLogicalOperator, for instance: Argument_A AND Argument_B AND Argument_C Template Description A DiagnosticEnvConditionFormula embodies the computation instruction that is to be evaluated at runtime to determine if the DiagnosticEnvironmentalCondition is currently present (i.e. the formula is evaluated to true) or not (otherwise). The formula itself consists of parts which are combined by the logical operations specified by DiagnosticEnvConditionFormula.op. If a diagnostic functionality cannot be executed because an environmental condition fails then the diagnostic stack shall send a negative response code (NRC) back to the client. The value of the NRC is directly related to the specific formula and is therefore formalized in the attribute DiagnosticEnvConditionFormula.nrcValue. M2 Parameter DiagnosticExtract::Dcm::EnvironmentalCondition:: DiagnosticEnvConditionFormula
映射规则 A DcmModeRule is mapped to a DiagnosticEnvConditionFormula, if this DcmModeRule is a subrule, i.e. it is referenced by a DcmArgumentRef. In addition, a new DiagnosticEnvironmental Condition shall be created with DiagnosticEnvironmentalCondition.formula containing a Diagnostic EnvConditionFormula. In both cases, if no DcmLogicalOperator is present in this DcmModeRule, then DiagnosticEnvConditionFormula shall be set to DiagnosticLogicalOperatorEnum.logicalAnd.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00925]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmProcessingConditions/DcmModeRule
BSW 参数 DcmArgumentRef
BSW 类型 ECUC-CHOICE-REFERENCE-DEF
BSW 说明 This is a choice reference either to a mode condition or a an other mode rule serving as sub-expression.
模板描述 A DiagnosticEnvConditionFormulaPart can either be a atomic condition, e.g. a DiagnosticEnvCompareCondition, or a DiagnosticEnvConditionFormula, again, which allows arbitrary nesting.
M2 参数 DiagnosticExtract::Dcm::EnvironmentalCondition:: DiagnosticEnvConditionFormulaPart
映射规则 Depending on the destination, one DcmArgumentRef is mapped to a DiagnosticEnvCondition Formula if "destination" is a DcmModeRule, and to a DiagnosticEnvCompareCondition, if "destination" is a DcmModeCondition. The order of the aggregation of the DiagnosticEnvCondition FormulaParts shall correspond to the ordering of the index of the DcmArgumentRefs.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00927]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmProcessingConditions/DcmModeRule/DcmLogicalOperator
BSW 参数 DCM_AND
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 DiagnosticEnvConditionFormula.op: This attribute represents the concrete operator (supported operators: and, or) of the condition formula. DiagnosticLogicalOperatorEnum.logicalAnd: Logical AND
模板描述 DiagnosticExtract::Dcm::EnvironmentalCondition::DiagnosticEnvConditionFormula. op , Diagnostic Extract::Dcm::EnvironmentalCondition::DiagnosticLogicalOperatorEnum. logicalAnd
M2 参数 1:1 mapping
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmProcessingConditions/DcmModeRule/DcmLogicalOperator
BSW 参数 DCM_OR
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Template Description DiagnosticEnvConditionFormula.op: This attribute represents the concrete operator (supported operators: and, or) of the condition formula. DiagnosticLogicalOperatorEnum.logicalOr: Logical OR M2 Parameter DiagnosticExtract::Dcm::EnvironmentalCondition::DiagnosticEnvConditionFormula. op , Diagnostic Extract::Dcm::EnvironmentalCondition::DiagnosticLogicalOperatorEnum. logicalOr Mapping Rule 1:1 mapping Mapping Status valid
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmConfigSet/DcmProcessingConditions/DcmModeRule
BSW 参数 DcmModeRuleNrcValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Optional parameter which defines the NRC to be sent in case the mode rule condition is not valid.
模板描述 This attribute represents the concrete NRC value that shall be returned if the condition fails.
M2 参数 DiagnosticExtract::Dcm::EnvironmentalCondition::DiagnosticEnvConditionFormula. nrcValue Mapping Type full ECUC Parameter ID
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00949]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmGeneral
BSW 参数 DcmDDDIDStorage
BSW 类型 ECUC-BOOLEAN-PARAM-DEF
BSW 说明 This configuration switch defines, whether DDDID definition is stored non-volatile or not. true: DDDID are stored non-volatile false: DDDID are only maintained volatile
模板描述 This configuration switch defines whether DDDID definition is handled as non-volatile information or not.
M2 参数 DiagnosticExtract::Dcm::DiagnosticService::DynamicallyDefineDataIdentifier::DiagnosticDynamicallyDefineDataIdentifier Class. configurationHandling
映射规则 volatile -> false, nonVolatile -> true
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00971]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmGeneral
BSW 参数 DcmRespondAllRequest
BSW 类型 ECUC-BOOLEAN-PARAM-DEF
BSW 说明 If set to FALSE the Dcm will not respond to diagnostic request that contains a service ID which is in the range from 0x40 to 0x7F or in the range from 0xC0 to 0xFF (Response IDs).
模板描述 If set to FALSE the DCM will not respond to diagnostic request that contains a service ID which is in the range from 0x40 to 0x7F or in the range from 0xC0 to 0xFF (Response IDs).
M2 参数 DiagnosticExtract::DiagnosticCommonProps::DiagnosticCommonProps. responseOnAllRequestSids
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00600]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmGeneral
BSW 参数 DcmS3ServerTimeoutOverwrite
BSW 类型 ECUC-FLOAT-PARAM-DEF
BSW 说明 Time for the server to keep a diagnostic session other than the defaultSession active while not receiving any diagnostic request message. This parameter overwrites the 5s recommend value of the S3server timeout in ISO 14229-2. The parameter value is defined in seconds. Template Description Time for the server to keep a diagnostic session other than the default session active while not receiving any diagnostic request message. M2 Parameter DiagnosticExtract::Dcm::DiagnosticService::SessionControl::DiagnosticSessionControlClass. s3ServerTimeout Mapping Rule 1:1 mapping Mapping Status valid Mapping Type full ECUC Parameter ID [ECUC_Dcm_01240]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmGeneral
BSW 参数 DcmSecureCoding
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 Contains references to diagnostic elements that are used for the secure coding process. Template Description This meta-class acts a mapping element to select diagnostic service instances that are used in the secure coding procedure. Besides, there are already defined diagnostic capabilities they furthermore have a additional semantics that is used during the secure coding process. In particular, this class references write data by identifier instances that mandatory require a secure coding and this class references a diagnostic routine control that is used to provide the signature and to persist the data in non-volatile memory. M2 Parameter DiagnosticExtract::DiagnosticMapping:: DiagnosticSecureCodingMapping
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01245]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmGeneral/DcmSecureCoding
BSW 参数 DcmSecureCodingDataIdentifier
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Refers to a writeable data identifier that requires the secure coding process to write the data.
模板描述 Refer to write data by identifier instances that have the semantics to be a secure coding DID.
M2 参数 DiagnosticExtract::DiagnosticMapping::DiagnosticSecureCodingMapping. dataIdentifier
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_01246]
属性 值
BSW 模块 Dcm
BSW 上下文 Dcm/DcmGeneral
BSW 参数 DcmVinRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Reference to the Did containing the VIN Information. This parameter is needed for function Dcm_GetVin
模板描述 This meta-class represents the ability to model a diagnostic data identifier (DID) that is fully specified regarding the payload at configuration-time.
M2 参数 DiagnosticExtract::CommonDiagnostics:: DiagnosticDataIdentifier
映射规则 This reference shall only apply to a DiagnosticDataIdentifier where the attribute representsVin is set to true.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dcm_00984]

G.3. Dem

属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDTC
BSW 参数 DemDTCFunctionalUnit
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 DTCFuncitonalUnit is a 1-byte value which identifies the corresponding basic vehicle / system function which reports the DTC. This parameter is necessary for the report of severity information. If this parameter is configured for no DTC, the Dem provides no DTC functional unit information.
模板描述 This attribute specifies a 1-byte value which identifies the corresponding basic vehicle / system function which reports the DTC. This parameter is necessary for the report of severity information.
M2 参数 DiagnosticExtract::Dem::DiagnosticTroubleCode::DiagnosticTroubleCodeUds. functionalUnit
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00643]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDTC
BSW 参数 DemDTCSeverity
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 DTC severity according to ISO 14229-1. This parameter depends on the automotive manufacturer. If it is not configured, the value is counted as 'no severity'. If this parameter is configured for no DTC, the Dem provides no DTC severity information.
模板描述 DTC severity according to ISO 14229-1.
M2 参数 DiagnosticExtract::Dem::DiagnosticTroubleCode::DiagnosticTroubleCodeUds. severity
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00645]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDTC/DemDTCSeverity
BSW 参数 DEM_SEVERITY_CHECK_AT_NEXT_HALT
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Check at next halt
模板描述 Check at next halt.
M2 参数 DiagnosticExtract::Dem::DiagnosticTroubleCode::DiagnosticUdsSeverityEnum. checkAtNextHalt
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDTC/DemDTCSeverity
BSW 参数 DEM_SEVERITY_CHECK_IMMEDIATELY
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Check immediately
模板描述 Check immediately.
M2 参数 DiagnosticExtract::Dem::DiagnosticTroubleCode::DiagnosticUdsSeverityEnum. immediately
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDTC/DemDTCSeverity
BSW 参数 DEM_SEVERITY_MAINTENANCE_ONLY
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Maintenance required
模板描述 Maintenance required.
M2 参数 DiagnosticExtract::Dem::DiagnosticTroubleCode::DiagnosticUdsSeverityEnum. maintenanceOnly
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDTC/DemDTCSeverity
BSW 参数 DEM_SEVERITY_NO_SEVERITY
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 No severity information available
模板描述 No severity information available.
M2 参数 DiagnosticExtract::Dem::DiagnosticTroubleCode::DiagnosticUdsSeverityEnum. noSeverity
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDTC
BSW 参数 DemDtcValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 3 Byte value of the UDS Diagnostic Trouble Code (DTC). The value is unique within a fault memory. The ranges: 0x000000-0x0000FF and 0xFFFFFF are reserved by ISO 14229-1.
模板描述 Unique Diagnostic Trouble Code value for UDS.
M2 参数 DiagnosticExtract::Dem::DiagnosticTroubleCode::DiagnosticTroubleCodeUds. udsDtcValue
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00887]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDTC
BSW 参数 DemNvStorageStrategy
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 This parameter defines when the event related data of the DTC is stored in the NVRAM.
模板描述 Change description for Class immediateNvDataStorage in table "Table A.111: DiagnosticTroubleCodeProps": Switch to enable immediate storage triggering of an according event memory entry persistently to NVRAM. true: immediate non-volatile storage triggering on first occurrence and shutdown. false: immediate non-volatile storage triggering on shutdown.
M2 参数 DiagnosticExtract::Dem::DiagnosticTroubleCode::DiagnosticTroubleCodeProps. immediateNvDataStorage
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00127]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDTC/DemNvStorageStrategy
BSW 参数 DURING_SHUTDOWN
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Store during shutdown
模板描述 Change description for Class immediateNvDataStorage in table "Table A.111: DiagnosticTroubleCodeProps": Switch to enable immediate storage triggering of an according event memory entry persistently to NVRAM. true: immediate non-volatile storage triggering on first occurrence and shutdown. false: immediate non-volatile storage triggering on shutdown.
M2 参数 DiagnosticExtract::Dem::DiagnosticTroubleCode::DiagnosticTroubleCodeProps. immediateNvDataStorage
映射规则 immediateNvDataStorage == false
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDTC/DemNvStorageStrategy
BSW 参数 IMMEDIATE_AT_FIRST_OCCURRENCE
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Store at first occurrence of DemEventMemoryEntryStorageTrigger trigger and during shutdown
模板描述 Change description for Class immediateNvDataStorage in table "Table A.111: DiagnosticTroubleCodeProps": Switch to enable immediate storage triggering of an according event memory entry persistently to NVRAM. true: immediate non-volatile storage triggering on first occurrence and shutdown. false: immediate non-volatile storage triggering on shutdown.
M2 参数 DiagnosticExtract::Dem::DiagnosticTroubleCode::DiagnosticTroubleCodeProps. immediateNvDataStorage
映射规则 immediateNvDataStorage == true
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDTC
BSW 参数 DemWWHOBDDTCClass
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 DTC Class according to ISO 14229-1 [2013 version]. This parameter depends on the automotive manufacturer. If it is not configured, the value is marked as 'unclassified'. If this parameter is configured for no DTC, the Dem provides no DTC WWHOBD class information.
模板描述 This attribute is used to identify (if applicable) the corresponding severity class of an WWH-OBD DTC.
M2 参数 DiagnosticExtract::Dem::DiagnosticTroubleCode::DiagnosticTroubleCodeUds. wwhObdDtcClass
映射规则 1:1 mapping full
映射类型 Mapping Status ECUC Parameter ID valid [ECUC_Dem_00912]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDTC/DemWWHOBDDTCClass
BSW 参数 DEM_DTC_WWHOBD_CLASS_A
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Class A
模板描述 This attribute represents the severity class A.
M2 参数 DiagnosticExtract::Dem::DiagnosticTroubleCode::DiagnosticWwhObdDtcClassEnum. demDtcWwhObdClassA
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDTC/DemWWHOBDDTCClass
BSW 参数 DEM_DTC_WWHOBD_CLASS_B1
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Class B1
模板描述 This attribute represents the severity class B1.
M2 参数 DiagnosticExtract::Dem::DiagnosticTroubleCode::DiagnosticWwhObdDtcClassEnum. demDtcWwhObdClassB1
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDTC/DemWWHOBDDTCClass
BSW 参数 DEM_DTC_WWHOBD_CLASS_B2
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Class B2
模板描述 This attribute represents the severity class B2.
M2 参数 DiagnosticExtract::Dem::DiagnosticTroubleCode::DiagnosticWwhObdDtcClassEnum. demDtcWwhObdClassB2
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDTC/DemWWHOBDDTCClass
BSW 参数 DEM_DTC_WWHOBD_CLASS_C
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Class C
模板描述 This attribute represents the severity class C.
M2 参数 DiagnosticExtract::Dem::DiagnosticTroubleCode::DiagnosticWwhObdDtcClassEnum. demDtcWwhObdClassC
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDTC/DemWWHOBDDTCClass
BSW 参数 DEM_DTC_WWHOBD_CLASS_NOCLASS
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 No Class information
模板描述 This attribute represents the option to intentionally not describe a dedicated severity class of an WWH-OBD DTC.
M2 参数 DiagnosticExtract::Dem::DiagnosticTroubleCode::DiagnosticWwhObdDtcClassEnum. demDtcWwhObdClassNoInformation
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDTCAttributes
BSW 参数 DemAgingCycleCounterThreshold
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Number of aging cycles needed to unlearn/delete the event.
模板描述 Number of aging cycles needed to unlearn/delete the event.
M2 参数 DiagnosticExtract::Dem::DiagnosticAging::DiagnosticAging. threshold
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00623]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDTCAttributes
BSW 参数 DemAgingCycleRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Reference to the cycle which is triggering the aging of the event.
模板描述 This represents the applicable aging cycle.
M2 参数 DiagnosticExtract::Dem::DiagnosticAging::DiagnosticAging. agingCycle
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00624]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDTCAttributes
BSW 参数 DemDTCPriority
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Priority of the event/dtc, in view of full event memory. A lower value means higher priority.
模板描述 Priority of the event, in view of full event buffer. A lower value means higher priority.
M2 参数 DiagnosticExtract::Dem::DiagnosticTroubleCode::DiagnosticTroubleCodeProps. priority
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00662]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDTCAttributes
BSW 参数 DemDTCSignificance
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 Significance of the event, which indicates additional information concerning fault classification and resolution. It can be mapped as Dem-internal data element. It shall be configured, if it is a part of event related data.
模板描述 Significance of the event, which indicates additional information concerning fault classification and resolution.
M2 参数 DiagnosticExtract::Dem::DiagnosticTroubleCode::DiagnosticTroubleCodeProps. significance
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00779]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDTCAttributes/DemDTCSignificance
BSW 参数 DEM_EVENT_SIGNIFICANCE_OCCURRENCE
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 issue, which indicates additional information concerning insufficient system behavior
模板描述 Issue, which indicates additional information concerning insufficient system behavior.
M2 参数 DiagnosticExtract::Dem::DiagnosticTroubleCode::DiagnosticSignificanceEnum. occurence
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDTCAttributes
BSW 参数 DemMaxNumberFreezeFrameRecords
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 This parameter defines the number of according freeze frame records, which can maximal be stored for this event. Therefore all these freeze frame records have the same freeze frame class. This parameter is only required for calculated record numeration (refer to DemTypeOfFreezeFrameRecordNumeration).
模板描述 This attribute defines the number of according freeze frame records, which can maximal be stored for this event. Therefore all these freeze frame records have the same freeze frame class.
M2 参数 DiagnosticExtract::Dem::DiagnosticTroubleCode::DiagnosticTroubleCodeProps. maxNumberFreezeFrameRecords
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00605]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDTCAttributes
BSW 参数 DemMemoryDestinationRef
BSW 类型 ECUC-CHOICE-REFERENCE-DEF
BSW 说明 The memory destination assigns DTCs to one memory destination.
模板描述 DiagnosticExtract::Dem::DiagnosticTroubleCode::DiagnosticTroubleCodeProps. memoryDestination
M2 参数 1:1 mapping
映射规则 full
映射类型 valid
映射状态 [ECUC_Dem_00890]
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDebounceCounterBasedClass
BSW 参数 DemCounterBasedFdcThresholdStorageValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Threshold to allocate an event memory entry and to capture the Freeze Frame.
模板描述 Threshold to allocate an event memory entry and to capture the Freeze Frame.
M2 参数 CommonStructure::ServiceNeeds::DiagEventDebounceCounterBased. counterBasedFdcThresholdStorageValue
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00914]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDebounceCounterBasedClass
BSW 参数 DemDebounceBehavior
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 This parameter defines how the event debounce algorithm will behave, if a related enable condition is not fulfilled or Control DTCSetting of the related event is disabled.
模板描述 This attribute defines how the event debounce algorithm will behave, if a related enable condition is not fulfilled or Control DTCSetting of the related event is disabled.
M2 参数 DiagnosticExtract::Dem::DiagnosticDebouncingAlgorithm::DiagnosticDebounceAlgorithmProps. debounceBehavior
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00786]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDebounceCounterBasedClass/DemDebounceBehavior
BSW 参数 DEM_DEBOUNCE_FREEZE
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 The event debounce counter will be frozen with the current value and will not change while a related enable condition is not fulfilled or ControlDTCSetting of the related event is disabled. After all related enable conditions are fulfilled and Control DTCSetting of the related event is enabled again, the event qualification will continue with the next report of the event (i.e. Set EventStatus).
模板描述 The event debounce counter will be frozen with the current value and will not change while a related enable condition is not fulfilled or ControlDTCSetting of the related event is disabled. After all related enable conditions are fulfilled and Control DTCSetting of the related event is enabled again, the event qualification will continue with the next report of the event (i.e. Set EventStatus).
M2 参数 DiagnosticExtract::Dem::DiagnosticDebouncingAlgorithm::DiagnosticDebounceBehaviorEnum. freeze
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDebounceCounterBasedClass/DemDebounceBehavior
BSW 参数 DEM_DEBOUNCE_RESET
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 The event debounce counter will be reset to initial value if a related enable condition is not fulfilled or ControlDTCSetting of the related event is disabled. The qualification of the event will be restarted with the next valid event report.
模板描述 The event debounce counter will be reset to initial value if a related enable condition is not fulfilled or ControlDTCSetting of the related event is disabled. The qualification of the event will be restarted with the next valid event report.
M2 参数 DiagnosticExtract::Dem::DiagnosticDebouncingAlgorithm::DiagnosticDebounceBehaviorEnum. reset
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDebounceCounterBasedClass
BSW 参数 DemDebounceCounterDecrementStepSize ECUC-INTEGER-PARAM-DEF
BSW 类型 Defines the step size for decrementation of the internal debounce counter (PREPASSED).
BSW 说明 This value shall be taken to decrement the internal debounce counter.
模板描述 CommonStructure::ServiceNeeds::DiagEventDebounceCounterBased. counterDecrementStepSize
M2 参数 Shall be taken from DiagnosticExtract::DiagnosticCommonProps.debounceAlgorithm Props.debounceAlgorithm.counterDecrementStepSize. Applicable if DiagnosticExtract::DiagnosticCommonProps.debounceAlgorithmProps.debounce Algorithm is modeled by means of a DiagEventDebounceCounterBased.
映射规则 full
映射类型 valid
映射状态 [ECUC_Dem_00635]
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDebounceCounterBasedClass
BSW 参数 DemDebounceCounterFailedThreshold
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Defines the value of the internal debounce counter, which indicates the failed status.
模板描述 This value defines the event-specific limit that indicates the "failed" counter status.
M2 参数 CommonStructure::ServiceNeeds::DiagEventDebounceCounterBased. counterFailedThreshold
映射规则 Shall be taken from DiagnosticExtract::DiagnosticCommonProps.debounceAlgorithm Props.debounceAlgorithm.counterFailedThreshold. Applicable if DiagnosticExtract::DiagnosticCommonProps.debounceAlgorithmProps.debounce Algorithm is modeled by means of a DiagEventDebounceCounterBased.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00618]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDebounceCounterBasedClass
BSW 参数 DemDebounceCounterIncrementStepSize
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Defines the step size for incrementation of the internal debounce counter (PREFAILED).
模板描述 This value shall be taken to increment the internal debounce counter.
M2 参数 CommonStructure::ServiceNeeds::DiagEventDebounceCounterBased. counterIncrementStepSize
映射规则 Shall be taken from DiagnosticExtract::DiagnosticCommonProps.debounceAlgorithm Props.debounceAlgorithm.counterIncrementStepSize. Applicable if DiagnosticExtract::DiagnosticCommonProps.debounceAlgorithmProps.debounce Algorithm is modeled by means of a DiagEventDebounceCounterBased.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00637]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDebounceCounterBasedClass
BSW 参数 DemDebounceCounterJumpDown
BSW 类型 ECUC-BOOLEAN-PARAM-DEF
BSW 说明 Switch for the activation of Jump-Down. true: Jump-Down activated false: Jump-Down deactivated
模板描述 This value activates or deactivates the counter jump-down behavior.
M2 参数 CommonStructure::ServiceNeeds::DiagEventDebounceCounterBased. counterJumpDown
映射规则 Shall be taken from DiagnosticExtract::DiagnosticCommonProps.debounceAlgorithm Props.debounceAlgorithm.counterJumpDown. Applicable if DiagnosticExtract::DiagnosticCommonProps.debounceAlgorithmProps.debounce Algorithm is modeled by means of a DiagEventDebounceCounterBased.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00685]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDebounceCounterBasedClass
BSW 参数 DemDebounceCounterJumpDownValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Jump-Down value of the internal debounce counter which is taken as initialization value for the counter when the respective step-down occurs.
模板描述 This value represents the initial value of the internal debounce counter if the counting direction changes from incrementing to decrementing.
M2 参数 CommonStructure::ServiceNeeds::DiagEventDebounceCounterBased. counterJumpDownValue
映射规则 Shall be taken from DiagnosticExtract::DiagnosticCommonProps.debounceAlgorithm Props.debounceAlgorithm.counterJumpDownValue. Applicable if DiagnosticExtract::DiagnosticCommonProps.debounceAlgorithmProps.debounce Algorithm is modeled by means of a DiagEventDebounceCounterBased.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00638]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDebounceCounterBasedClass
BSW 参数 DemDebounceCounterJumpUp
BSW 类型 ECUC-BOOLEAN-PARAM-DEF
BSW 说明 Switch for the activation of Jump-Up. true: Jump-Up activated false: Jump-Up deactivated
模板描述 This value activates or deactivates the counter jump-up behavior.
M2 参数 CommonStructure::ServiceNeeds::DiagEventDebounceCounterBased. counterJumpUp
映射规则 Shall be taken from DiagnosticExtract::DiagnosticCommonProps.debounceAlgorithm Props.debounceAlgorithm.counterJumpUp. Applicable if DiagnosticExtract::DiagnosticCommonProps.debounceAlgorithmProps.debounce Algorithm is modeled by means of a DiagEventDebounceCounterBased.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00686]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDebounceCounterBasedClass
BSW 参数 DemDebounceCounterJumpUpValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Jump-Up value of the internal debounce counter which is taken as initialization value for the counter when the respective step-up occurs.
模板描述 This value represents the initial value of the internal debounce counter if the counting direction changes from decrementing to incrementing.
M2 参数 CommonStructure::ServiceNeeds::DiagEventDebounceCounterBased. counterJumpUpValue
映射规则 Shall be taken from DiagnosticExtract::DiagnosticCommonProps.debounceAlgorithm Props.debounceAlgorithm.counterJumpValue. Applicable if DiagnosticExtract::DiagnosticCommonProps.debounceAlgorithmProps.debounce Algorithm is modeled by means of a DiagEventDebounceCounterBased.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00639]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDebounceCounterBasedClass
BSW 参数 DemDebounceCounterPassedThreshold
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Defines the value of the internal debounce counter, which indicates the passed status.
模板描述 This value defines the event-specific limit that indicates the "passed" counter status.
M2 参数 CommonStructure::ServiceNeeds::DiagEventDebounceCounterBased. counterPassedThreshold
映射规则 Shall be taken from DiagnosticExtract::DiagnosticCommonProps.debounceAlgorithm Props.debounceAlgorithm.counterPassedThreshold. Applicable if DiagnosticExtract::DiagnosticCommonProps.debounceAlgorithmProps.debounce Algorithm is modeled by means of a DiagEventDebounceCounterBased.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00636]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDebounceCounterBasedClass
BSW 参数 DemDebounceCounterStorage
BSW 类型 ECUC-BOOLEAN-PARAM-DEF
BSW 说明 Switch to store the debounce counter value non-volatile or not. true: debounce counter value shall be stored non-volatile false: debounce counter value is volatile
模板描述 Switch to store the debounce counter value non-volatile or not. true: debounce counter value shall be stored non-volatile false: debounce counter value is volatile Please note that this attribute is not relevant for the adaptive platform.
M2 参数 DiagnosticExtract::Dem::DiagnosticDebouncingAlgorithm::DiagnosticDebounceAlgorithmProps. debounceCounterStorage
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00791]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDebounceTimeBasedClass
BSW 参数 DemDebounceBehavior
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 This parameter defines how the event debounce algorithm will behave, if a related enable condition is not fulfilled or Control DTCSetting of the related event is disabled.
模板描述 This attribute defines how the event debounce algorithm will behave, if a related enable condition is not fulfilled or Control DTCSetting of the related event is disabled.
M2 参数 DiagnosticExtract::Dem::DiagnosticDebouncingAlgorithm::DiagnosticDebounceAlgorithmProps. debounceBehavior
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00789]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDebounceTimeBasedClass/DemDebounceBehavior
BSW 参数 DEM_DEBOUNCE_FREEZE
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 The event debounce timer will be frozen with the current value and will not change while a related enable condition is not fulfilled or ControlDTCSetting of the related event is disabled. After all related enable conditions are fulfilled and Control DTCSetting of the related event is enabled again, the event qualification will continue with the next report of the event (i.e. Set EventStatus).
模板描述 The event debounce counter will be frozen with the current value and will not change while a related enable condition is not fulfilled or ControlDTCSetting of the related event is disabled. After all related enable conditions are fulfilled and Control DTCSetting of the related event is enabled again, the event qualification will continue with the next report of the event (i.e. Set EventStatus).
M2 参数 DiagnosticExtract::Dem::DiagnosticDebouncingAlgorithm::DiagnosticDebounceBehaviorEnum. freeze
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDebounceTimeBasedClass/DemDebounceBehavior
BSW 参数 DEM_DEBOUNCE_RESET
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 The event debounce timer will be reset to initial value if a related enable condition is not fulfilled or ControlDTCSetting of the related event is disabled. The qualification of the event will be restarted with the next valid event report.
模板描述 The event debounce counter will be reset to initial value if a related enable condition is not fulfilled or ControlDTCSetting of the related event is disabled. The qualification of the event will be restarted with the next valid event report.
M2 参数 DiagnosticExtract::Dem::DiagnosticDebouncingAlgorithm::DiagnosticDebounceBehaviorEnum. reset
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDebounceTimeBasedClass
BSW 参数 DemDebounceTimeFailedThreshold
BSW 类型 ECUC-FLOAT-PARAM-DEF
BSW 说明 Defines the time out duration for "Event Failed" qualification. The AUTOSAR configuration standard is to use SI units, so this parameter is defined as float value in seconds. Dem configuration tools must convert this float value to the appropriate value format for the use in the software implementation of Dem.
模板描述 This value represents the event-specific delay indicating the "failed" status.
M2 参数 CommonStructure::ServiceNeeds::DiagEventDebounceTimeBased. timeFailedThreshold
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00716]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDebounceTimeBasedClass
BSW 参数 DemDebounceTimePassedThreshold
BSW 类型 ECUC-FLOAT-PARAM-DEF
BSW 说明 Defines the time out duration for "Event Passed" qualification. The AUTOSAR configuration standard is to use SI units, so this parameter is defined as float value in seconds. Dem configuration tools must convert this float value to the appropriate value format for the use in the software implementation of Dem.
模板描述 This value represents the event-specific delay indicating the "passed" status.
M2 参数 CommonStructure::ServiceNeeds::DiagEventDebounceTimeBased. timePassedThreshold
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00717]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDebounceTimeBasedClass
BSW 参数 DemTimeBasedFdcThresholdStorageValue
BSW 类型 ECUC-FLOAT-PARAM-DEF
BSW 说明 Threshold to allocate an event memory entry and to capture the Freeze Frame.
模板描述 Threshold to allocate an event memory entry and to capture the Freeze Frame.
M2 参数 CommonStructure::ServiceNeeds::DiagEventDebounceTimeBased. timeBasedFdcThresholdStorageValue
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00915]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDtrs/DemDtr
BSW 参数 DemDtrEventRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Reference to the DemEventParameter this DTR is related to. If the related event is not configured, the Dem cannot ensure consistency between the DTR and the event.
模板描述 DiagnosticTestResult: This meta-class represents the ability to define diagnostic test results. DiagnosticEvent: This element is used to configure DiagnosticEvents.
M2 参数 DiagnosticExtract::Dem::DiagnosticTestResult:: DiagnosticTestResult , DiagnosticExtract::Dem::DiagnosticEvent:: DiagnosticEvent
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00808]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDtrs/DemDtr
BSW 参数 DemDtrMid ECUC-INTEGER-PARAM-DEF
BSW 类型 The OBDMID of the DTR. The values 0x00, 0x20, 0x40, 0x60, 0x80, 0xA0, 0xC0, 0xE0 are reserved.
BSW 说明 This represents the numerical measurement Id
模板描述 DiagnosticExtract::Dem::DiagnosticTestResult::DiagnosticMeasurementIdentifier. obdMid
M2 参数 1:1 mapping
映射规则 full
映射类型 valid
映射状态 [ECUC_Dem_00809]
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDtrs/DemDtr
BSW 参数 DemDtrTid
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 The OBDTID of the DTR.
模板描述 This represents the numerical id associated with the diagnostic test identifier.
M2 参数 DiagnosticExtract::Dem::DiagnosticTestResult::DiagnosticTestIdentifier. id
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00810]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDtrs/DemDtr
BSW 参数 DemDtrUasid
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 The UaSId the DTR data shall be scaled to, and reported together with the rescaled DTR data.
模板描述 This represents the unit and scaling Id of the diagnostic test result.
M2 参数 DiagnosticExtract::Dem::DiagnosticTestResult::DiagnosticTestIdentifier. uasId
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00811]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDtrs/DemDtr
BSW 参数 DemDtrUpdateKind
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 Update conditions applied by the Dem to reports of DTR values. Only supported if a related Event is configured
模板描述 This attribute controls the update behavior of the enclosing DiagnosticTestResult.
M2 参数 DiagnosticExtract::Dem::DiagnosticTestResult::DiagnosticTestResult. updateKind
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00812]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDtrs/DemDtr/DemDtrUpdateKind
BSW 参数 DEM_DTR_UPDATE_ALWAYS
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Any DTR result reported by the monitor is used by the Dem.
模板描述 Any DTR result reported by the monitor is used by the Dem.
M2 参数 DiagnosticExtract::Dem::DiagnosticTestResult::DiagnosticTestResultUpdateEnum. always
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemDtrs/DemDtr/DemDtrUpdateKind
BSW 参数 DEM_DTR_UPDATE_STEADY
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 The Dem accepts reported DTRs only when the configured debouncing mechanism is stable at the FAIL or PASS limit.
模板描述 The Dem accepts reported DTRs only when the configured debouncing mechanism is stable at the FAIL or PASS limit.
M2 参数 DiagnosticExtract::Dem::DiagnosticTestResult::DiagnosticTestResultUpdateEnum. steady
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemEventParameter
BSW 参数 DemCallbackClearEventAllowed
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 The presence of this container indicates that the Dem has access to a "ClearEventAllowed" callback. In case there is a DemCallbackClearEventAllowedFnc, this parameter defines the name of the function that the Dem will call. In case there is no DemCallbackClearEventAllowedFnc, the Dem will have an R-Port requiring the interface CallbackClear EventAllowed whose name is generated by using the unique callback-prefix followed by the event name. Template Description In case the clearing of a Diagnostic Event has to be allowed or prohibited through the SWC interface CallbackClearEvent Allowed, the SWC has to indicate this by defining appropriate ServiceNeeds (i.e. DiagnosticEventNeeds). M2 Parameter DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticEventClearAllowedEnum. requiresCallbackExecution Shall be taken from DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticEvent::DiagnosticEvent ClearAllowedEnum.requiresCallbackExecution. If literal requiresCallbackExecution is set, the BSW container DemCallbackClearEventAllowed will be present. Dem will call the funtion named by configuration parameter DemCallbackClearEvent AllowedFnc. If no such function name is provided, Dem will require an R-Port with the interface name using the unique callback-prefix followed by the event name.
映射规则 full
映射类型 valid
映射状态 [ECUC_Dem_00607]
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemEventParameter/DemCallbackClearEventAllowed
BSW 参数 DemCallbackClearEventAllowedFnc
BSW 类型 ECUC-FUNCTION-NAME-DEF
BSW 说明 Function name of prototype "ClearEventAllowed".
模板描述 This attribute defines whether the Dem has access to a "ClearEventAllowed" callback.
M2 参数 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticEvent. eventClearAllowed
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00609]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemEventParameter/DemCallbackClearEventAllowed
BSW 参数 DemClearEventAllowedBehavior
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 Defines the resulting UDS status byte for the related event, which must not be cleared according to the ClearEventAllowed callback.
模板描述 This attribute defines the resulting UDS status byte for the related event, which shall not be cleared according to the Clear EventAllowed callback
M2 参数 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticEvent. clearEventAllowedBehavior
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00788]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemEventParameter/DemCallbackClearEventAllowed/DemClearEvent AllowedBehavior
BSW 参数 DEM_NO_STATUS_BYTE_CHANGE
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 The UDS status byte keeps unchanged.
模板描述 The event status byte keeps unchanged.
M2 参数 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticClearEventAllowedBehaviorEnum. noStatusByteChange
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemEventParameter/DemCallbackClearEventAllowed/DemClearEvent AllowedBehavior
BSW 参数 DEM_ONLY_THIS_CYCLE_AND_READINESS
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 The <...>ThisOperationCycle and readiness bits of the UDS status byte are reset.
模板描述 The OperationCycle and readiness bits of the event status byte are reset.
M2 参数 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticClearEventAllowedBehaviorEnum. onlyThisCycleAndReadiness
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemEventParameter
BSW 参数 DemDebounceAlgorithmClass
BSW 类型 ECUC-CHOICE-CONTAINER-DEF
BSW 说明 Debounce algorithm class: counter based, time based, or monitor internal.
模板描述 This class represents the ability to specify the pre-debounce algorithm which is selected and/or required by the particular monitor. This class inherits from Identifiable in order to allow further documentation of the expected or implemented debouncing and to use the category for the identification of the expected / implemented debouncing. M2 Parameter 1:1 mapping
映射规则 full
映射类型 valid
映射状态 [ECUC_Dem_00604]
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemEventParameter/DemDebounceAlgorithmClass
BSW 参数 DemDebounceCounterBased
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 This container contains the configuration (parameters) for counter based debouncing.
模板描述 This meta-class represents the ability to indicate that the counter-based debounce algorithm shall be used by the DEM for this diagnostic monitor. This is related to set the ECUC choice container DemDebounceAlgorithmClass to DemDebounceCounterBased.
M2 参数 CommonStructure::ServiceNeeds:: DiagEventDebounceCounterBased
映射规则 There are two ways to derive the existence of DemDebounceCounterBased: 1. DiagEventNeeds,diagEventDebounceAlgoritm exists and is modeled as a DiagEventDebounce CounterBased. 2. DiagnosticContributionSet.commonProperties.debounceAlgorithmProps.debounceAlgorithm exists and is modeled as a DiagEventDebounceCounterBased If both alternatives exist at the same time then the definition ot DiagnosticContributionSet.common Properties.debounceAlgorithmProps.debounceAlgorithm shall be handled with priority.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00711]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemEventParameter/DemDebounceAlgorithmClass
BSW 参数 DemDebounceMonitorInternal
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 This container contains the configuration (parameters) for monitor internal debouncing.
模板描述 This meta-class represents the ability to indicate that no Dem pre-debounce algorithm shall be used for this diagnostic monitor. The SWC might implement an internal debouncing algorithm and report qualified (debounced) results to the Dem/ DM.
M2 参数 CommonStructure::ServiceNeeds:: DiagEventDebounceMonitorInternal
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00712]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemEventParameter/DemDebounceAlgorithmClass
BSW 参数 DemDebounceTimeBased
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 This container contains the configuration (parameters) for time based debouncing.
模板描述 This meta-class represents the ability to indicate that the time-based pre-debounce algorithm shall be used by the Dem for this diagnostic monitor. This is related to set the EcuC choice container DemDebounceAlgorithmClass to DemDebounceTimeBase.
M2 参数 CommonStructure::ServiceNeeds:: DiagEventDebounceTimeBased
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00713]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemEventParameter
BSW 参数 DemEnableConditionGroupRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 References an enable condition group.
模板描述 Defines which EnableConditionGroup is applicable for a DiagnosticEvent.
M2 参数 DiagnosticExtract::DiagnosticMapping:: DiagnosticEventToEnableConditionGroupMapping
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00746]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemEventParameter
BSW 参数 DemEventAssociatedIdentification
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Event associated identifier that allows to identify an event. This value can be reported as internal data element in snapshot records or extended data records.
模板描述 This attribute represents the identification number that is associated with the enclosing DiagnosticEvent and allows to identify it when placed into a snapshot record or extended data record storage. This value can be reported as internal data element in snapshot records or extended data records.
M2 参数 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticEvent. associatedEventIdentification
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00969]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemEventParameter
BSW 参数 DemEventConfirmationThreshold
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Defines the operation cycle threshold of the DTC confirmation status according "Confirmation Threshold" of ISO 14229-1.
模板描述 This attribute defines the number of operation cycles with a failed result before a confirmed DTC is set to 1. The semantic of this attribute is a by "1" increased value compared to the confirmation threshold of the "trip counter" mentioned in ISO 14229-1 in figure D.4. A value of "1" defines the immediate confirmation of the DTC along with the first reported failed. This is also sometimes called "zero trip DTC". A value of "2" defines a DTC confirmation in the operation cycle after the first occurred failed. A value of "2" is typically used in the US for OBD DTC confirmation.
M2 参数 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticEvent. confirmationThreshold
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00924]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemEventParameter
BSW 参数 DemEventKind
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 This parameter is used to distinguish between SW-C and BSW events.
模板描述 This attribute is used to distinguish between SWC and BSW events.
M2 参数 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticEvent. eventKind
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00660]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemEventParameter/DemEventKind
BSW 参数 DEM_EVENT_KIND_BSW
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 The event is a assigned to a BSW module
模板描述 The event is assigned to a BSW module.
M2 参数 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticEventKindEnum. bsw
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemEventParameter/DemEventKind
BSW 参数 DEM_EVENT_KIND_SWC
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 The event is a assigned to a SW-C
模板描述 The event is assigned to a SWC.
M2 参数 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticEventKindEnum. swc
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemEventParameter
BSW 参数 DemEventRecoverableInSameOperationCycle
BSW 类型 ECUC-BOOLEAN-PARAM-DEF
BSW 说明 If parameter is configured to FALSE, reporting of PASSED will be ignored if the event is already "testfailed this operation cycle".
模板描述 If the attribute is set to true then reporting PASSED will reset the indication of a failed test in the current operation cycle. If the attribute is set to false then reporting PASSED will be ignored and not lead to a reset of the indication of a failed test.
M2 参数 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticEvent. recoverableInSameOperationCycle
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00916]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemEventParameter
BSW 参数 DemFFPrestorageInNvm
BSW 类型 ECUC-BOOLEAN-PARAM-DEF BSW Description If the event uses a pre-stored freeze-frame this attribute indicates if the event requires the pre-stored data to be stored in non-volatile memory. TRUE = store the pre-stored data in non-volatile memory, FALSE = pre-stored data is not stored in non-volatile memory. Template Description DiagnosticEventNeeds.prestoredFreezeframeStoredInNvm: If the Event uses a prestored freeze-frame (using the operations PrestoreFreezeFrame and ClearPrestoredFreezeFrame of the service interface DiagnosticMonitor) this attribute indicates if the Event requires the data to be stored in non-volatile memory. TRUE = Dem shall store the prestored data in non-volatile memory, FALSE = Data can be lost at shutdown (not stored in Nvm). DiagnosticEvent.prestoredFreezeframeStoredInNvm: If the Event uses a prestored freeze-frame (using the operations PrestoreFreezeFrame and ClearPrestoredFreezeFrame of the service interface DiagnosticMonitor) this attribute indicates if the Event requires the data to be stored in non-volatile memory. TRUE = Dem shall store the prestored data in non-volatile memory, FALSE = Data can be lost at shutdown (not stored in Nvm) M2 Parameter CommonStructure::ServiceNeeds::DiagnosticEventNeeds. prestoredFreezeframeStoredInNvm , Diagnostic Extract::Dem::DiagnosticEvent::DiagnosticEvent. prestoredFreezeframeStoredInNvm
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00948]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemEventParameter
BSW 参数 DemFFPrestorageSupported
BSW 类型 ECUC-BOOLEAN-PARAM-DEF
BSW 说明 If this parameter is set to true, then the Prestorage of FreezeFrames is supported by the assigned event. This parameter is useful to calculate the buffer size.
模板描述 This attribute describes whether the Prestorage of FreezeFrames is supported by the assigned event or not. true: Prestorage of FreezeFrames is supported fFalse: Prestorage of FreezeFrames is not supported
M2 参数 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticEvent. prestorageFreezeFrame
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00671]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemEventParameter/DemIndicatorAttribute
BSW 参数 DemIndicatorBehaviour
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 Behaviour of the linked indicator
模板描述 Behavior of the linked indicator.
M2 参数 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticConnectedIndicator. behavior
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00682]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemEventParameter/DemIndicatorAttribute/DemIndicatorBehaviour
BSW 参数 DEM_INDICATOR_BLINKING
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 The indicator blinks when the event has status FAILED Not relevant with J1939.
模板描述 The indicator blinks when the event has status FAILED.
M2 参数 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticConnectedIndicatorBehaviorEnum. blinkMode
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemEventParameter/DemIndicatorAttribute/DemIndicatorBehaviour
BSW 参数 DEM_INDICATOR_BLINK_CONT
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 The indicator is active and blinks when the event has status FAILED Not relevant with J1939.
模板描述 The indicator is active and blinks when the event has status FAILED.
M2 参数 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticConnectedIndicatorBehaviorEnum. blinkOrContinuousOnMode
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemEventParameter/DemIndicatorAttribute/DemIndicatorBehaviour
BSW 参数 DEM_INDICATOR_CONTINUOUS
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 The indicator is active when the even has status FAILED
模板描述 The indicator is active when the event has status FAILED.
M2 参数 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticConnectedIndicatorBehaviorEnum. continuousOnMode
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemEventParameter/DemIndicatorAttribute/DemIndicatorBehaviour
BSW 参数 DEM_INDICATOR_FAST_FLASH
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Flash Indicator Lamp should be set to 'Fast Flash'
模板描述 Flash Indicator Lamp should be set to "Fast Flash".
M2 参数 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticConnectedIndicatorBehaviorEnum. fastFlashingMode
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemEventParameter/DemIndicatorAttribute/DemIndicatorBehaviour
BSW 参数 DEM_INDICATOR_SLOW_FLASH
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Flash Indicator Lamp should be set to 'Slow Flash'
模板描述 Flash Indicator Lamp should be set to "Slow Flash".
M2 参数 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticConnectedIndicatorBehaviorEnum. slowFlashingMode
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemEventParameter/DemIndicatorAttribute
BSW 参数 DemIndicatorFailureCycleCounterThreshold
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Defines the number of failure cycles for the WarningIndicatorOnCriteria.
模板描述 This attribute defines the number of failure cycles for the WarningIndicatorOnCriteria. Please note that this attribute is not relevant for the Adaptive Platform.
M2 参数 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticConnectedIndicator. indicatorFailureCycleCounterThreshold
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00750]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemEventParameter/DemIndicatorAttribute
BSW 参数 DemIndicatorHealingCycleCounterThreshold
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Defines the number of healing cycles for the WarningIndicatorOffCriteria.
模板描述 This attribute defines the number of healing cycles for the WarningIndicatorOffCriteria
M2 参数 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticConnectedIndicator. healingCycleCounterThreshold
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00748]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemEventParameter
BSW 参数 DemStorageConditionGroupRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 References a storage condition group.
模板描述 Defines which StorageConditionGroup is applicable for a DiagnosticEvent.
M2 参数 DiagnosticExtract::DiagnosticMapping:: DiagnosticEventToStorageConditionGroupMapping
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00769]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet
BSW 参数 DemMultiEventTriggering
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 Configures an event that will trigger other events whenever the event is reported.
模板描述 This meta-class provides the ability to map a master diagnostic event with a slave diagnostic event such that reporting of the master event with a given value also reports the slave event with the same value
M2 参数 DiagnosticExtract::DiagnosticMapping:: DiagnosticMasterToSlaveEventMapping
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00944]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemMultiEventTriggering
BSW 参数 DemMultiEventTriggeringMasterEventRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Reference to the event that will trigger other events upon reception of this event.
模板描述 This represents the master diagnostic event.
M2 参数 DiagnosticExtract::DiagnosticMapping::DiagnosticMasterToSlaveEventMapping. masterEvent
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00945]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemMultiEventTriggering
BSW 参数 DemMultiEventTriggeringSlaveEventRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Reference to the event that is triggered upon triggering the master event.
模板描述 This represents the slave diagnostic event.
M2 参数 DiagnosticExtract::DiagnosticMapping::DiagnosticMasterToSlaveEventMapping. slaveEvent
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00946]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemObdDTC
BSW 参数 DemConsiderPtoStatus
BSW 类型 ECUC-BOOLEAN-PARAM-DEF
BSW 说明 This parameter is TRUE, when the event is affected by the Dem PTO handling.
模板描述 This attribute describes the affection of the event by the Dem PTO handling. true: the event is affected by the Dem PTO handling. false: the event is not affected by the Dem PTO handling.
M2 参数 DiagnosticExtract::Dem::DiagnosticTroubleCode::DiagnosticTroubleCodeObd. considerPtoStatus
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00602]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemObdDTC
BSW 参数 DemDtcValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Unique Diagnostic Trouble Code value for OBD
模板描述 Unique Diagnostic Trouble Code value for OBD.
M2 参数 DiagnosticExtract::Dem::DiagnosticTroubleCode::DiagnosticTroubleCodeObd. obdDTCValue
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00885]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemObdDTC
BSW 参数 DemDtcValue3Byte
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 3 Byte OBD DTC value that is used for the UDS Diagnostic Trouble Code (DTC) if UDS and OBD DTC handling is separated. The value is defining a DTC based on SAE J2012.
模板描述 3 Byte OBD DTC value based on the definition from SAE J2012. The existence of this attribute is only required if separated UDS and OBD DTC values are used for SAE J1979-2. If this attribute does not exist, then UDS DTC values are used with J1979-2.
M2 参数 DiagnosticExtract::Dem::DiagnosticTroubleCode::DiagnosticTroubleCodeUds. obdDtcValue3Byte
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00988]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemObdDTC
BSW 参数 DemEventOBDReadinessGroup
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 This parameter specifies the Event OBD Readiness group as defined by SAE J1979-DA for PID $01 and PID $41 computation. This parameter is only applicable for emission-related ECUs. Template Description DiagnosticTroubleCodeObd.eventReadinessGroup: This aggregation allows for the variant definition of the attribute eventObdReadinessGroup. EventObdReadinessGroup.eventObdReadinessGroup: This attribute specifies the Event OBD Readiness group for PID $01 and PID $41 computation. This attribute is only applicable for emission-related ECUs. M2 Parameter DiagnosticExtract::Dem::DiagnosticTroubleCode::DiagnosticTroubleCodeObd. eventReadinessGroup , Diagnostic Extract::Dem::DiagnosticTroubleCode::EventObdReadinessGroup. eventObdReadinessGroup
映射规则 Configuration is only possible if DemOBDSupport is set to DEM_OBD_MASTER_ECU (see up_ Dem_00131)
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00755]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemObdDTC
BSW 参数 DemJ1939DTCValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Unique Diagnostic Trouble Code value for J1939 (consisting of SPN and FMI).
模板描述 DiagnosticTroubleCodeJ1939.spn: This represents the releated SPN. DiagnosticTroubleCodeJ1939.fmi: This attribute represents the behavior of the Failure Mode Indicator.
M2 参数 DiagnosticExtract::Dem::DiagnosticTroubleCode::DiagnosticTroubleCodeJ1939. spn , DiagnosticExtract::Dem::Diagnostic TroubleCode::DiagnosticTroubleCodeJ1939. fmi
映射规则 The value is created out of a combination of the two attribute fmi and spn. The details are explained in the J1939-73 document
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00892]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemPidClass
BSW 参数 DemPidDataElement
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 This container contains the different data elements contained in the specific PID.
模板描述 This represents the data carried by the DiagnosticParameterIdentifier.
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticParameterIdentifier. dataElement
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00896]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemPidClass/DemPidDataElement
BSW 参数 DemPidDataElementClassRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 This reference contains the link to a data element class.
模板描述 This meta-class represents the ability to describe a concrete piece of data to be taken into account for diagnostic purposes.
M2 参数 DiagnosticExtract::CommonDiagnostics:: DiagnosticDataElement
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00733]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemConfigSet/DemPidClass
BSW 参数 DemPidIdentifier
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 identifier of the PID
模板描述 This is the numerical identifier used to identify the DiagnosticParameterIdentifier in the scope of diagnostic workflow (see SAE J1979-DA).
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticParameterIdentifier. id
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00705]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral
BSW 参数 DemAgingRequiresTestedCycle
BSW 类型 ECUC-BOOLEAN-PARAM-DEF
BSW 说明 Defines if the aging cycle counter is processed every aging cycles or if only tested aging cycle are considered. true: only tested aging cycle are considered for aging cycle counter false: aging cycle counter is processed every aging cycle
模板描述 Defines whether the aging cycle counter is processed every aging cycles or else only tested aging cycle are considered. If the attribute is set to TRUE: only tested aging cycle are considered for aging cycle counter. If the attribute is set to FALSE: aging cycle counter is processed every aging cycle. On the classic platform, the value of this attribute has to be identical for each DiagnosticMemoryDestination.
M2 参数 DiagnosticExtract::Dem::DiagnosticMemoryDestination::DiagnosticMemoryDestination. agingRequiresTestedCycle
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00877]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral
BSW 参数 DemClearDTCLimitation
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 Defines the supported Dem_<...>ClearDTC API scope.
模板描述 Defines the scope of the DEM_ClearDTC Api. On the classic platform, the value of this attribute has to be identical for each DiagnosticMemoryDestination.
M2 参数 DiagnosticExtract::Dem::DiagnosticMemoryDestination::DiagnosticMemoryDestination. clearDtcLimitation
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00790]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemClearDTCLimitation
BSW 参数 DEM_ALL_SUPPORTED_DTCS
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Dem_<...>ClearDTC accepts all supported DTC values, as well as all DTC values which are configured in DemGroupDTCs and DEM_DTC_GROUP_ALL_DTCS.
模板描述 DEM_ClearDtc API accepts all supported DTC values.
M2 参数 DiagnosticExtract::Dem::DiagnosticMemoryDestination::DiagnosticClearDtcLimitationEnum. allSupportedDtcs
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemClearDTCLimitation
BSW 参数 DEM_ONLY_CLEAR_ALL_DTCS
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Dem_<...>ClearDTC accepts ClearAllDTCs only.
模板描述 DEM_ClearDtc API accepts ClearAllDTCs only.
M2 参数 DiagnosticExtract::Dem::DiagnosticMemoryDestination::DiagnosticClearDtcLimitationEnum. clearAllDtcs
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemDataElementClass/DemExternalCSDataElementClass/DemDataElement DataType
BSW 参数 FLOAT
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is float.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , CommonStructure::ServiceNeeds::DiagnosticValueNeeds. fixedLength
映射规则 baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements shall not exist arraySizeSemantics shall not exist Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemDataElementClass/DemExternalCSDataElementClass/DemDataElement DataType
BSW 参数 FLOAT_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is float array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , CommonStructure::ServiceNeeds::DiagnosticValueNeeds. fixedLength baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements shall not exist arraySizeSemantics shall not exist Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemDataElementClass/DemExternalSRDataElementClass/DemDataElement DataType
BSW 参数 FLOAT
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is float.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed. M2 Parameter AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , CommonStructure::ServiceNeeds::DiagnosticValueNeeds. fixedLength baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements shall not exist arraySizeSemantics shall not exist Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemDataElementClass/DemExternalSRDataElementClass/DemDataElement DataType
BSW 参数 FLOAT_N
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Type of the data is float array.
模板描述 BaseTypeDirectDefinition.baseTypeEncoding: This specifies, how an object of the current BaseType is encoded, e.g. in an ECU within a message sequence. BaseTypeDirectDefinition.baseTypeSize: Describes the length of the data type specified in the container in bits. DiagnosticValueNeeds.fixedLength: This attribute is applicable only if the DiagnosticValueNeeds is aggregated within a BswModuleDependency. This attribute controls whether the data length of the data is fixed.
M2 参数 AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeEncoding , AsamHdo::BaseTypes::BaseTypeDirectDefinition. baseTypeSize , CommonStructure::ServiceNeeds::DiagnosticValueNeeds. fixedLength
映射规则 baseTypeEncoding = NONE, WINDOWS-1252, UTF-8, BCD-P, BCD-UP baseTypeSize = 8 max NumberOfElements shall not exist arraySizeSemantics shall not exist Derivation from DiagnosticValueNeeds.fixedLength=1 possible.
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemDataElementClass/DemInternalDataElementClass
BSW 参数 DemInternalDataElement
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 This parameter defines the Dem-internal data value, which is mapped to the data element.
模板描述 This represents the DiagnosticDataElement for which the access is further qualified by the DiagnosticDemProvidedData Mapping.
M2 参数 DiagnosticExtract::DiagnosticMapping::ServiceMapping::DiagnosticDemProvidedDataMapping. dataElement
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00616]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemDataElementClass/DemInternalDataElementClass/DemInternalData Element
BSW 参数 DEM_EVENT_ASSOCIATED_IDENTIFICATION
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Represents the static value associated to an event by DemEventAssociatedIdentification.
模板描述 This attribute represents the identification number that is associated with the enclosing DiagnosticEvent and allows to identify it when placed into a snapshot record or extended data record storage. This value can be reported as internal data element in snapshot records or extended data records.
M2 参数 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticEvent. associatedEventIdentification
映射规则 If attribute DiagnosticEvent.associatedEventIdentification exists then the corresponding Dem InternalDataElement shall be set to DEM_EVENT_ASSOCIATED_IDENTIFICATION.
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral
BSW 参数 DemDidClass
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 This container contains the configuration (parameters) for a data Id class. It is assembled out of one or several data elements.
模板描述 This is the numerical identifier used to identify the DiagnosticAbstractDataIdentifier in the scope of diagnostic workflow
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticAbstractDataIdentifier. id
映射规则 If the subclass of DiagnosticAbstractDataIdentifier is referenced as DiagnosticTroubleCode Props.freezeFrameContent.dataIdentifier
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00706]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemDidClass
BSW 参数 DemDidIdentifier
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Identifier of the Data ID.
模板描述 This is the numerical identifier used to identify the DiagnosticAbstractDataIdentifier in the scope of diagnostic workflow
M2 参数 DiagnosticExtract::CommonDiagnostics::DiagnosticAbstractDataIdentifier. id
映射规则 If the DiagnosticDataIdentifier is referenced as DiagnosticTroubleCodeProps.freezeFrame Content.dataIdentifier
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00650]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral
BSW 参数 DemEnableCondition
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 This container contains the configuration (parameters) for enable conditions.
模板描述 Specification of an enable condition.
M2 参数 DiagnosticExtract::Dem::DiagnosticCondition:: DiagnosticEnableCondition
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00653]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEnableCondition
BSW 参数 DemEnableConditionStatus
BSW 类型 ECUC-BOOLEAN-PARAM-DEF
BSW 说明 Defines the initial status for enable or disable of acceptance of event reports of a diagnostic event. The value is the initialization after power up (before this condition is reported the first time). true: acceptance of a diagnostic event enabled false: acceptance of a diagnostic event disabled
模板描述 Defines the initial status for enable or disable of acceptance/storage of event reports of a diagnostic event. The value is the initialization after power up (before this condition is reported the first time). true: acceptance/storage of a diagnostic event enabled false: acceptance/storage of a diagnostic event disabled
M2 参数 DiagnosticExtract::Dem::DiagnosticCondition::DiagnosticCondition. initValue
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00656]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral
BSW 参数 DemEnableConditionGroup
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 This container contains the configuration (parameters) for enable condition groups.
模板描述 Enable condition group which includes one or several enable conditions.
M2 参数 DiagnosticExtract::Dem::DiagnosticConditionGroup:: DiagnosticEnableConditionGroup
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00745]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEnableConditionGroup
BSW 参数 DemEnableConditionRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 References an enable condition.
模板描述 Reference to enableConditions that are part of the EnableConditionGroup.
M2 参数 DiagnosticExtract::Dem::DiagnosticConditionGroup::DiagnosticEnableConditionGroup. enableCondition
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00655]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet
BSW 参数 DemIndicator
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 This container contains the configuration (parameters) for Indicators.
模板描述 Definition of an indicator.
M2 参数 DiagnosticExtract::Dem::DiagnosticIndicator:: DiagnosticIndicator
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00680]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet
BSW 参数 DemMILIndicatorRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 This parameter defines the indicator representing the MIL. This parameter is mandatory for ECUs supporting OBD (refer to DemOBDSupport).
模板描述 Defines the type of the indicator.
M2 参数 DiagnosticExtract::Dem::DiagnosticIndicator::DiagnosticIndicator. type
映射规则 DiagnosticIndicator.type == DiagnosticIndicatorTypeEnum.malfunction
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00723]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet
BSW 参数 DemPrimaryMemory
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 This container contains the primary event memory specific parameters of the Dem module.
模板描述 This represents a primary memory for a diagnostic event.
M2 参数 DiagnosticExtract::Dem::DiagnosticMemoryDestination:: DiagnosticMemoryDestinationPrimary
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00901]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet/DemPrimaryMemory
BSW 参数 DemDtcStatusAvailabilityMask
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Mask for the supported DTC status bits by the Dem. This mask is used in the positive response of UDS service 0x19.
模板描述 Mask for the supported DTC status bits by the Dem.
M2 参数 DiagnosticExtract::Dem::DiagnosticMemoryDestination::DiagnosticMemoryDestination. dtcStatusAvailabilityMask
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00978]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet/DemPrimaryMemory
BSW 参数 DemEventDisplacementStrategy
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 This configuration switch defines, whether support for event displacement is enabled or not, and which displacement strategy is followed.
模板描述 This attribute defines, whether support for event displacement is enabled or not, and which displacement strategy is followed.
M2 参数 DiagnosticExtract::Dem::DiagnosticMemoryDestination::DiagnosticMemoryDestination. eventDisplacementStrategy
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00980]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet/DemPrimaryMemory/DemEventDisplacementStrategy
BSW 参数 DEM_DISPLACEMENT_FULL
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Event memory entry displacement is enabled, by consideration of priority active/passive status, and occurrence.
模板描述 Event memory entry displacement is enabled, by consideration of priority active/passive status, and occurrence.
M2 参数 DiagnosticExtract::Dem::DiagnosticMemoryDestination::DiagnosticEventDisplacementStrategyEnum. full
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet/DemPrimaryMemory/DemEventDisplacementStrategy
BSW 参数 DEM_DISPLACEMENT_NONE
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Event memory entry displacement is disabled.
模板描述 Event memory entry displacement is disabled.
M2 参数 DiagnosticExtract::Dem::DiagnosticMemoryDestination::DiagnosticEventDisplacementStrategyEnum. none
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet/DemPrimaryMemory/DemEventDisplacementStrategy
BSW 参数 DEM_DISPLACEMENT_PRIO_OCC
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Event memory entry displacement is enabled, by consideration of priority and occurrence (but without active/passive status).
模板描述 Event memory entry displacement is enabled, by consideration of priority and occurrence (but without active/passive status).
M2 参数 DiagnosticExtract::Dem::DiagnosticMemoryDestination::DiagnosticEventDisplacementStrategyEnum. prioOcc
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet/DemPrimaryMemory
BSW 参数 DemEventMemoryEntryStorageTrigger
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 Configures the primary trigger to allocate an event memory entry.
模板描述 Describes the trigger to allocate an event memory entry.
M2 参数 DiagnosticExtract::Dem::DiagnosticMemoryDestination::DiagnosticMemoryDestination. memoryEntryStorageTrigger
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00982]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet/DemPrimaryMemory/DemEventMemoryEntryStorage Trigger
BSW 参数 DEM_TRIGGER_ON_CONFIRMED
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Event Memory entries are triggered if the UDS status bit 3 (confirmedDTC) changes from 0 to 1.
模板描述 Status information of UDS DTC status bit 3
M2 参数 DiagnosticExtract::Dem::DiagnosticMemoryDestination::DiagnosticMemoryEntryStorageTriggerEnum. confirmed
映射规则 DemPrimaryMemory.DemEventMemoryEntryStorageTrigger.DEM_TRIGGER_ON_CONFIRMEDl maps to DiagnosticMemoryDestinationPrimary.memoryEntryStorageTrigger if the attribute is set to DiagnosticMemoryEntryStorageTriggerEnum.confirmed DemUserDefinedMemory.DemEventMemoryEntryStorageTrigger.DEM_TRIGGER_ON_ CONFIRMEDl maps to DiagnosticMemoryDestinationUserDefined.memoryEntryStorageTrigger if the attribute is set toDiagnosticMemoryEntryStorageTriggerEnum.confirmed
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet/DemPrimaryMemory/DemEventMemoryEntryStorage Trigger
BSW 参数 DEM_TRIGGER_ON_FDC_THRESHOLD
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Event Memory entries are triggered when the FDC threshold is reached.
模板描述 Threshold to allocate an event memory entry and to capture the Freeze Frame.
M2 参数 DiagnosticExtract::Dem::DiagnosticMemoryDestination::DiagnosticMemoryEntryStorageTriggerEnum. fdcThreshold
映射规则 1:1 mapping rules: DemPrimaryMemory.DemEventMemoryEntryStorageTrigger.DEM_TRIGGER_ON_FDC_ THRESHOLD maps to DiagnosticMemoryDestinationPrimary.memoryEntryStorageTrigger if the attribute is set to DiagnosticMemoryEntryStorageTriggerEnum.fdcThreshold DemUserDefinedMemory.DemEventMemoryEntryStorageTrigger.DEM_TRIGGER_ON_FDC_ THRESHOLD maps to DiagnosticMemoryDestinationUserDefined.memoryEntryStorageTrigger if the attribute is set to DiagnosticMemoryEntryStorageTriggerEnum.fdcThreshold
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet/DemPrimaryMemory/DemEventMemoryEntryStorage Trigger
BSW 参数 DEM_TRIGGER_ON_TEST_FAILED
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Event Memory entries are triggered if the UDS status bit 0 (testFailed) changes from 0 to 1.
模板描述 Status information of UDS DTC status bit 0.
M2 参数 DiagnosticExtract::Dem::DiagnosticMemoryDestination::DiagnosticMemoryEntryStorageTriggerEnum. testFailed
映射规则 DemPrimaryMemory.DemEventMemoryEntryStorageTrigger.DEM_TRIGGER_ON_TEST_FAILED maps to DiagnosticMemoryDestinationPrimary.memoryEntryStorageTrigger if the attribute is set to DiagnosticMemoryEntryStorageTriggerEnum.testFailed DemUserDefinedMemory.DemEventMemoryEntryStorageTrigger.DEM_TRIGGER_ON_TEST_ FAILED maps to DiagnosticMemoryDestinationUserDefined.memoryEntryStorageTrigger if the attribute is set to DiagnosticMemoryEntryStorageTriggerEnum.testFailed
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet/DemPrimaryMemory
BSW 参数 DemMaxNumberEventEntryPrimary
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Maximum number of events which can be stored in the primary memory
模板描述 This attribute fixes the maximum number of event entries in the fault memory.
M2 参数 DiagnosticExtract::Dem::DiagnosticMemoryDestination::DiagnosticMemoryDestination. maxNumberOfEventEntries
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00690]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet/DemPrimaryMemory
BSW 参数 DemOccurrenceCounterProcessing
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 This configuration switch defines the consideration of the fault confirmation process for the occurrence counter. For OBD and mixed systems (OBD/non OBD, refer to DemOBDSupport) configuration switch shall always set to DEM_PROCESS_ OCCCTR_TF.
模板描述 This attribute defines the consideration of the fault confirmation process for the occurrence counter.
M2 参数 DiagnosticExtract::DiagnosticCommonProps::DiagnosticCommonProps. occurrenceCounterProcessing
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00984]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet/DemPrimaryMemory/DemOccurrenceCounter Processing
BSW 参数 DEM_PROCESS_OCCCTR_CDTC
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 the occurrence counter is triggered by the TestFailed bit if the fault confirmation was successful (ConfirmedDTC bit is set)
模板描述 The occurrence counter is incremented when TestFailed bit transitions from 0 to 1 if the fault confirmation was successful (ConfirmedDTC bit is already set).
M2 参数 DiagnosticExtract::DiagnosticCommonProps::DiagnosticOccurrenceCounterProcessingEnum. confirmedDtcBit
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet/DemPrimaryMemory/DemOccurrenceCounter Processing
BSW 参数 DEM_PROCESS_OCCCTR_TF
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 the occurrence counter is only triggered by the TestFailed bit (and the fault confirmation is not considered) This parameter is mandatory in case of J1939.
模板描述 The occurrence counter is incremented when TestFailed bit transitions from 0 to 1 (and the fault confirmation is not considered).
M2 参数 DiagnosticExtract::DiagnosticCommonProps::DiagnosticOccurrenceCounterProcessingEnum. testFailedBit
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet/DemPrimaryMemory
BSW 参数 DemTypeOfFreezeFrameRecordNumeration
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 This parameter defines the type of assigning freeze frame record numbers for event-specific freeze frame records.
模板描述 This attribute defines the type of assigning freeze frame record numbers for event-specific freeze frame records.
M2 参数 DiagnosticExtract::Dem::DiagnosticMemoryDestination::DiagnosticMemoryDestination. typeOfFreezeFrameRecordNumeration
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00986]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet/DemPrimaryMemory/DemTypeOfFreezeFrameRecord Numeration
BSW 参数 DEM_FF_RECNUM_CALCULATED
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 freeze frame records will be numbered consecutive starting by 1 in their chronological order
模板描述 Freeze frame records will be numbered consecutive starting by 1 in their chronological order.
M2 参数 DiagnosticExtract::Dem::DiagnosticMemoryDestination::DiagnosticTypeOfFreezeFrameRecordNumerationEnum. calculated
映射规则 If DiagnosticMemoryDestination.typeOfFreezeFrameRecordNumeration is set to DiagnosticTypeOf FreezeFrameRecordNumerationEnum.calculated
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet/DemPrimaryMemory/DemTypeOfFreezeFrameRecord Numeration
BSW 参数 DEM_FF_RECNUM_CONFIGURED
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 freeze frame records will be numbered based on the given configuration in their chronological order
模板描述 Freeze frame records will be numbered based on the given configuration in their chronological order.
M2 参数 DiagnosticExtract::Dem::DiagnosticMemoryDestination::DiagnosticTypeOfFreezeFrameRecordNumerationEnum. configured
映射规则 If DiagnosticMemoryDestination.typeOfFreezeFrameRecordNumeration is set to DiagnosticTypeOf FreezeFrameRecordNumerationEnum.configured.
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet
BSW 参数 DemTypeOfDTCSupported
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 This parameter defines the format returned by Dem_GetTranslationType and does not relate to/influence the supported Dem functionality.
模板描述 This attribute defines the format returned by Dem_DcmGetTranslationType and does not relate to/influence the supported Dem functionality.
M2 参数 DiagnosticExtract::Dem::DiagnosticMemoryDestination::DiagnosticMemoryDestinationPrimary. typeOfDtcSupported
映射规则 1:1 mapping full
映射类型 valid [ECUC_Dem_00720]
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet/DemTypeOfDTCSupported
BSW 参数 DEM_DTC_TRANSLATION_ISO11992_4
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 ISO11992-4 DTC format
模板描述 ISO11992-4 DTC format
M2 参数 DiagnosticExtract::Dem::DiagnosticTroubleCode::DiagnosticTypeOfDtcSupportedEnum. iso11992_4
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet/DemTypeOfDTCSupported
BSW 参数 DEM_DTC_TRANSLATION_ISO14229_1
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 ISO14229-1 DTC format (3 byte format)
模板描述 ISO14229-1 DTC format (3 byte format)
M2 参数 DiagnosticExtract::Dem::DiagnosticTroubleCode::DiagnosticTypeOfDtcSupportedEnum. iso14229_1
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet/DemTypeOfDTCSupported
BSW 参数 DEM_DTC_TRANSLATION_ISO15031_6
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 ISO15031-6 DTC format = SAE_J2012-DA_DTCFormat_00 (2 byte format)
模板描述 ISO15031-6 DTC format (2 byte format)
M2 参数 DiagnosticExtract::Dem::DiagnosticTroubleCode::DiagnosticTypeOfDtcSupportedEnum. iso15031_6
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet/DemTypeOfDTCSupported
BSW 参数 DEM_DTC_TRANSLATION_SAEJ1939_73
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 SAEJ1939-73 DTC format
模板描述 SAEJ1939-73 DTC format
M2 参数 DiagnosticExtract::Dem::DiagnosticTroubleCode::DiagnosticTypeOfDtcSupportedEnum. saeJ1939_73
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet/DemTypeOfDTCSupported
BSW 参数 DEM_DTC_TRANSLATION_SAE_J2012_DA_ DTCFORMAT_04
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 SAE_J2012-DA_DTCFormat_00 (3 byte format)
模板描述 SAE_J2012-DA_DTCFormat_00 (3 byte format)
M2 参数 DiagnosticExtract::Dem::DiagnosticTroubleCode::DiagnosticTypeOfDtcSupportedEnum. saeJ2012_da
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet
BSW 参数 DemUserDefinedMemory
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 This container contains the user defined event memory specific parameters of the Dem module.
模板描述 This represents a user-defined memory for a diagnostic event.
M2 参数 DiagnosticExtract::Dem::DiagnosticMemoryDestination:: DiagnosticMemoryDestinationUserDefined
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00910]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet/DemUserDefinedMemory
BSW 参数 DemDtcStatusAvailabilityMask
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Mask for the supported DTC status bits by the Dem. This mask is used in the positive response of UDS service 0x19.
模板描述 Mask for the supported DTC status bits by the Dem.
M2 参数 DiagnosticExtract::Dem::DiagnosticMemoryDestination::DiagnosticMemoryDestination. dtcStatusAvailabilityMask
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00978]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet/DemUserDefinedMemory
BSW 参数 DemEventDisplacementStrategy
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 This configuration switch defines, whether support for event displacement is enabled or not, and which displacement strategy is followed.
模板描述 This attribute defines, whether support for event displacement is enabled or not, and which displacement strategy is followed.
M2 参数 DiagnosticExtract::Dem::DiagnosticMemoryDestination::DiagnosticMemoryDestination. eventDisplacementStrategy
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00980]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet/DemUserDefinedMemory/DemEventDisplacement Strategy
BSW 参数 DEM_DISPLACEMENT_FULL
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Event memory entry displacement is enabled, by consideration of priority active/passive status, and occurrence.
模板描述 Event memory entry displacement is enabled, by consideration of priority active/passive status, and occurrence.
M2 参数 DiagnosticExtract::Dem::DiagnosticMemoryDestination::DiagnosticEventDisplacementStrategyEnum. full
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet/DemUserDefinedMemory/DemEventDisplacement Strategy
BSW 参数 DEM_DISPLACEMENT_NONE
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Event memory entry displacement is disabled.
模板描述 Event memory entry displacement is disabled.
M2 参数 DiagnosticExtract::Dem::DiagnosticMemoryDestination::DiagnosticEventDisplacementStrategyEnum. none
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet/DemUserDefinedMemory/DemEventDisplacement Strategy
BSW 参数 DEM_DISPLACEMENT_PRIO_OCC
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Event memory entry displacement is enabled, by consideration of priority and occurrence (but without active/passive status).
模板描述 Event memory entry displacement is enabled, by consideration of priority and occurrence (but without active/passive status).
M2 参数 DiagnosticExtract::Dem::DiagnosticMemoryDestination::DiagnosticEventDisplacementStrategyEnum. prioOcc
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet/DemUserDefinedMemory
BSW 参数 DemEventMemoryEntryStorageTrigger
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 Configures the primary trigger to allocate an event memory entry.
模板描述 Describes the trigger to allocate an event memory entry.
M2 参数 DiagnosticExtract::Dem::DiagnosticMemoryDestination::DiagnosticMemoryDestination. memoryEntryStorageTrigger
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00982]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet/DemUserDefinedMemory/DemEventMemoryEntry StorageTrigger
BSW 参数 DEM_TRIGGER_ON_CONFIRMED
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Event Memory entries are triggered if the UDS status bit 3 (confirmedDTC) changes from 0 to 1.
模板描述 Status information of UDS DTC status bit 3
M2 参数 DiagnosticExtract::Dem::DiagnosticMemoryDestination::DiagnosticMemoryEntryStorageTriggerEnum. confirmed
映射规则 DemPrimaryMemory.DemEventMemoryEntryStorageTrigger.DEM_TRIGGER_ON_CONFIRMEDl maps to DiagnosticMemoryDestinationPrimary.memoryEntryStorageTrigger if the attribute is set to DiagnosticMemoryEntryStorageTriggerEnum.confirmed DemUserDefinedMemory.DemEventMemoryEntryStorageTrigger.DEM_TRIGGER_ON_ CONFIRMEDl maps to DiagnosticMemoryDestinationUserDefined.memoryEntryStorageTrigger if the attribute is set toDiagnosticMemoryEntryStorageTriggerEnum.confirmed
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet/DemUserDefinedMemory/DemEventMemoryEntry StorageTrigger
BSW 参数 DEM_TRIGGER_ON_FDC_THRESHOLD
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Event Memory entries are triggered when the FDC threshold is reached.
模板描述 Threshold to allocate an event memory entry and to capture the Freeze Frame.
M2 参数 DiagnosticExtract::Dem::DiagnosticMemoryDestination::DiagnosticMemoryEntryStorageTriggerEnum. fdcThreshold
映射规则 1:1 mapping rules: DemPrimaryMemory.DemEventMemoryEntryStorageTrigger.DEM_TRIGGER_ON_FDC_ THRESHOLD maps to DiagnosticMemoryDestinationPrimary.memoryEntryStorageTrigger if the attribute is set to DiagnosticMemoryEntryStorageTriggerEnum.fdcThreshold DemUserDefinedMemory.DemEventMemoryEntryStorageTrigger.DEM_TRIGGER_ON_FDC_ THRESHOLD maps to DiagnosticMemoryDestinationUserDefined.memoryEntryStorageTrigger if the attribute is set to DiagnosticMemoryEntryStorageTriggerEnum.fdcThreshold
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet/DemUserDefinedMemory/DemEventMemoryEntry StorageTrigger
BSW 参数 DEM_TRIGGER_ON_TEST_FAILED
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Event Memory entries are triggered if the UDS status bit 0 (testFailed) changes from 0 to 1.
模板描述 Status information of UDS DTC status bit 0.
M2 参数 DiagnosticExtract::Dem::DiagnosticMemoryDestination::DiagnosticMemoryEntryStorageTriggerEnum. testFailed
映射规则 DemPrimaryMemory.DemEventMemoryEntryStorageTrigger.DEM_TRIGGER_ON_TEST_FAILED maps to DiagnosticMemoryDestinationPrimary.memoryEntryStorageTrigger if the attribute is set to DiagnosticMemoryEntryStorageTriggerEnum.testFailed DemUserDefinedMemory.DemEventMemoryEntryStorageTrigger.DEM_TRIGGER_ON_TEST_ FAILED maps to DiagnosticMemoryDestinationUserDefined.memoryEntryStorageTrigger if the attribute is set to DiagnosticMemoryEntryStorageTriggerEnum.testFailed
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet/DemUserDefinedMemory
BSW 参数 DemMaxNumberEventEntryUserDefined
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Maximum number of events which can be stored in the user defined memory.
模板描述 This attribute fixes the maximum number of event entries in the fault memory.
M2 参数 DiagnosticExtract::Dem::DiagnosticMemoryDestination::DiagnosticMemoryDestination. maxNumberOfEventEntries
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00691]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet/DemUserDefinedMemory
BSW 参数 DemOccurrenceCounterProcessing
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 This configuration switch defines the consideration of the fault confirmation process for the occurrence counter. For OBD and mixed systems (OBD/non OBD, refer to DemOBDSupport) configuration switch shall always set to DEM_PROCESS_ OCCCTR_TF.
模板描述 This attribute defines the consideration of the fault confirmation process for the occurrence counter.
M2 参数 DiagnosticExtract::DiagnosticCommonProps::DiagnosticCommonProps. occurrenceCounterProcessing
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00984]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet/DemUserDefinedMemory/DemOccurrenceCounter Processing
BSW 参数 DEM_PROCESS_OCCCTR_CDTC
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 the occurrence counter is triggered by the TestFailed bit if the fault confirmation was successful (ConfirmedDTC bit is set)
模板描述 The occurrence counter is incremented when TestFailed bit transitions from 0 to 1 if the fault confirmation was successful (ConfirmedDTC bit is already set).
M2 参数 DiagnosticExtract::DiagnosticCommonProps::DiagnosticOccurrenceCounterProcessingEnum. confirmedDtcBit
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet/DemUserDefinedMemory/DemOccurrenceCounter Processing
BSW 参数 DEM_PROCESS_OCCCTR_TF
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 the occurrence counter is only triggered by the TestFailed bit (and the fault confirmation is not considered) This parameter is mandatory in case of J1939.
模板描述 The occurrence counter is incremented when TestFailed bit transitions from 0 to 1 (and the fault confirmation is not considered).
M2 参数 DiagnosticExtract::DiagnosticCommonProps::DiagnosticOccurrenceCounterProcessingEnum. testFailedBit
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet/DemUserDefinedMemory
BSW 参数 DemTypeOfFreezeFrameRecordNumeration
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 This parameter defines the type of assigning freeze frame record numbers for event-specific freeze frame records.
模板描述 This attribute defines the type of assigning freeze frame record numbers for event-specific freeze frame records.
M2 参数 DiagnosticExtract::Dem::DiagnosticMemoryDestination::DiagnosticMemoryDestination. typeOfFreezeFrameRecordNumeration
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00986]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet/DemUserDefinedMemory/DemTypeOfFreezeFrame RecordNumeration
BSW 参数 DEM_FF_RECNUM_CALCULATED
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 freeze frame records will be numbered consecutive starting by 1 in their chronological order
模板描述 Freeze frame records will be numbered consecutive starting by 1 in their chronological order.
M2 参数 DiagnosticExtract::Dem::DiagnosticMemoryDestination::DiagnosticTypeOfFreezeFrameRecordNumerationEnum. calculated
映射规则 If DiagnosticMemoryDestination.typeOfFreezeFrameRecordNumeration is set to DiagnosticTypeOf FreezeFrameRecordNumerationEnum.calculated
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet/DemUserDefinedMemory/DemTypeOfFreezeFrame RecordNumeration
BSW 参数 DEM_FF_RECNUM_CONFIGURED
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 freeze frame records will be numbered based on the given configuration in their chronological order
模板描述 Freeze frame records will be numbered based on the given configuration in their chronological order.
M2 参数 DiagnosticExtract::Dem::DiagnosticMemoryDestination::DiagnosticTypeOfFreezeFrameRecordNumerationEnum. configured
映射规则 If DiagnosticMemoryDestination.typeOfFreezeFrameRecordNumeration is set to DiagnosticTypeOf FreezeFrameRecordNumerationEnum.configured.
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemEventMemorySet/DemUserDefinedMemory
BSW 参数 DemUserDefinedMemoryIdentifier
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Identifier used by external tester to identify the User defined event memory.
模板描述 This represents the identifier of the user-defined memory.
M2 参数 DiagnosticExtract::Dem::DiagnosticMemoryDestination::DiagnosticMemoryDestinationUserDefined. memoryId
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00903]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemExtendedDataRecordClass
BSW 参数 DemExtendedDataRecordNumber
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 This configuration parameter specifies a number for an extended data record. The value is unique within a fault memory. One or more extended data records can be assigned to one diagnostic event/DTC. For primary fault memory, the value 0x00 and the range from 0xF0 to 0xFF are either reserved or predefined. For user defined fault memories, only the value 0x00 is reserved and 0xFF is predefined.
模板描述 This attribute specifies an unique identifier for an extended data record.
M2 参数 DiagnosticExtract::Dem::DiagnosticExtendedDataRecord::DiagnosticExtendedDataRecord. recordNumber
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00666]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemExtendedDataRecordClass
BSW 参数 DemExtendedDataRecordTrigger
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 Defines the trigger to store the ExtendedDataRecord.
模板描述 This attribute specifies the primary trigger to allocate an event memory entry.
M2 参数 DiagnosticExtract::Dem::DiagnosticExtendedDataRecord::DiagnosticExtendedDataRecord. trigger
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00804]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemExtendedDataRecordClass/DemExtendedDataRecordTrigger
BSW 参数 DEM_TRIGGER_ON_CONFIRMED
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 ExtendedDataRecord will be stored when the UDS status confirmed bit changes from 0 to 1.
模板描述 capture on "Confirmed"
M2 参数 DiagnosticExtract::Dem::DiagnosticFreezeFrame::DiagnosticRecordTriggerEnum. confirmed
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemExtendedDataRecordClass/DemExtendedDataRecordTrigger
BSW 参数 DEM_TRIGGER_ON_FDC_THRESHOLD
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 ExtendedDataRecord will be stored when the FDC reaches its threshold.
模板描述 capture on "FDC Threshold"
M2 参数 DiagnosticExtract::Dem::DiagnosticFreezeFrame::DiagnosticRecordTriggerEnum. fdcThreshold
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemExtendedDataRecordClass/DemExtendedDataRecordTrigger
BSW 参数 DEM_TRIGGER_ON_PASSED
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 ExtendedDataRecord will be stored when the event is reported as passed (testFailed bit transition 1 -> 0).
模板描述 Capture on testFailed bit transition 1 -> 0.
M2 参数 DiagnosticExtract::Dem::DiagnosticFreezeFrame::DiagnosticRecordTriggerEnum. testPassed
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemExtendedDataRecordClass/DemExtendedDataRecordTrigger
BSW 参数 DEM_TRIGGER_ON_PENDING
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 ExtendedDataRecord will be stored when the UDS status pending bit changes from 0 to 1.
模板描述 capture on "Pending"
M2 参数 DiagnosticExtract::Dem::DiagnosticFreezeFrame::DiagnosticRecordTriggerEnum. pending
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemExtendedDataRecordClass/DemExtendedDataRecordTrigger
BSW 参数 DEM_TRIGGER_ON_TEST_FAILED
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 ExtendedDataRecord will be stored when the UDS status test failed bit changes from 0 to 1.
模板描述 capture on "Test Failed"
M2 参数 DiagnosticExtract::Dem::DiagnosticFreezeFrame::DiagnosticRecordTriggerEnum. testFailed
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemExtendedDataRecordClass
BSW 参数 DemExtendedDataRecordUpdate
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 This extended data record is captured if the configured trigger condition in "DemExtendedDataRecordTrigger" is fulfilled.
模板描述 This attribute defines when an extended data record is captured. true: This extended data record is captured every time. false: This extended data record is only captured for new event memory entries.
M2 参数 DiagnosticExtract::Dem::DiagnosticExtendedDataRecord::DiagnosticExtendedDataRecord. update
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00621]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemFreezeFrameRecordClass
BSW 参数 DemFreezeFrameRecordNumber ECUC-INTEGER-PARAM-DEF
BSW 类型 This parameter defines the snapshot record number for a freeze frame. This record number is unique per freeze frame record number class. The number needs to be unique within a fault memory.
BSW 说明 This attribute defines a record number for a freeze frame record.
模板描述 DiagnosticExtract::Dem::DiagnosticFreezeFrame::DiagnosticFreezeFrame. recordNumber
M2 参数 1:1 mapping
映射规则 full
映射类型 valid
映射状态 [ECUC_Dem_00777]
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemFreezeFrameRecordClass
BSW 参数 DemFreezeFrameRecordTrigger
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 Defines the trigger to store the FreezeFrameRecord.
模板描述 This attribute defines the primary trigger to allocate an event memory entry.
M2 参数 DiagnosticExtract::Dem::DiagnosticFreezeFrame::DiagnosticFreezeFrame. trigger
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00803]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemFreezeFrameRecordClass/DemFreezeFrameRecordTrigger
BSW 参数 DEM_TRIGGER_ON_TEST_FAILED_THIS_OPERATION_ CYCLE
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Event Memory entries are triggered if the UDS status bit 1 (testFailedThisOperationCycle) changes from 0 to 1.
模板描述 Test Failed This Operation Cycle.
M2 参数 DiagnosticExtract::Dem::DiagnosticFreezeFrame::DiagnosticRecordTriggerEnum. testFailedThisOperationCycle
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemFreezeFrameRecordClass
BSW 参数 DemFreezeFrameRecordUpdate
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 This parameter defines the case, when the freeze frame record is stored/updated.
模板描述 This attribute defines the approach when the freeze frame record is stored/updated. true: FreezeFrame record is captured every time. false: FreezeFrame record is only captured for new event memory entries.
M2 参数 DiagnosticExtract::Dem::DiagnosticFreezeFrame::DiagnosticFreezeFrame. update
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00802]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemGeneralOBD
BSW 参数 DemSupportedObdUdsDtcSeparation
BSW 类型 ECUC-BOOLEAN-PARAM-DEF
BSW 说明 If this parameter is set to true, the OBD UDS DTC separation is enabled. If this parameter is set to false, the OBD UDS DTC separation is disabled.
模板描述 3 Byte OBD DTC value based on the definition from SAE J2012. The existence of this attribute is only required if separated UDS and OBD DTC values are used for SAE J1979-2. If this attribute does not exist, then UDS DTC values are used with J1979-2.
M2 参数 DiagnosticExtract::Dem::DiagnosticTroubleCode::DiagnosticTroubleCodeUds. obdDtcValue3Byte
映射规则 DemSupportedObdUdsDtcSeparation shall exist and set to true if, in the context of an enclosing DiagnosticContributionSet, at least one DiagnosticTroubleCodeObd exists where attribute obd DTCValue3Byte exists, independently of its value.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00989]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral
BSW 参数 DemOBDSupport
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 This configuration switch defines OBD support and kind of OBD ECU.
模板描述 This attribute is used to specify the role (if applicable) in which the DiagnosticEcuInstance supports OBD.
M2 参数 DiagnosticExtract::DiagnosticContribution::DiagnosticEcuInstanceProps. obdSupport
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00698]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemOBDSupport
BSW 参数 DEM_OBD_DEP_SEC_ECU
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Kind of OBD ECU: OBD Dependend / Secondary ECU
模板描述 This represents the role "secondary ECU".
M2 参数 DiagnosticExtract::DiagnosticContribution::DiagnosticObdSupportEnum. secondaryEcu
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemOBDSupport
BSW 参数 DEM_OBD_MASTER_ECU
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Kind of OBD ECU: Master ECU
模板描述 This represent the role "master ECU".
M2 参数 DiagnosticExtract::DiagnosticContribution::DiagnosticObdSupportEnum. masterEcu
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemOBDSupport
BSW 参数 DEM_OBD_NO_OBD_SUPPORT
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 OBD is not supported within this ECU
模板描述 This represents the ability to explicitly specify that no participation in OBD is foreseen.
M2 参数 DiagnosticExtract::DiagnosticContribution::DiagnosticObdSupportEnum. noObdSupport
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemOBDSupport
BSW 参数 DEM_OBD_PRIMARY_ECU
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Kind of OBD ECU: Pimary ECU
模板描述 This represents the role "primary ECU".
M2 参数 DiagnosticExtract::DiagnosticContribution::DiagnosticObdSupportEnum. primaryEcu
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral
BSW 参数 DemOperationCycle
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 This container holds all parameters that are relevant to configure an operation cycle.
模板描述 Definition of an operation cycle that is the base of the event qualifying and for Dem scheduling.
M2 参数 DiagnosticExtract::Dem::DiagnosticOperationCycle:: DiagnosticOperationCycle
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00701]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral
BSW 参数 DemRatio
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 This container contains the OBD-specific in-use-monitor performance ratio configuration. It is related to a specific event, a FID, and an IUMPR group. Template Description ObdRatioServiceNeeds: Specifies the abstract needs of a component or module on the configuration of OBD Services in relation to a particular "ratio monitoring" which is supported by this component or module. DiagnosticIumprGroup: This meta-class represents the ability to model a IUMPR groups. M2 Parameter CommonStructure::ServiceNeeds:: ObdRatioServiceNeeds , DiagnosticExtract::Dem::DiagnosticEvent:: DiagnosticIumprGroup In case the owner of the ObdRatioServiceNeeds is a BSW module then the DemRatio.shortName = {capitalizedMip}_{ServiceDependency.symbolicNameProps.symbol}. For the DiagnosticIumprGroup the mapping rule is 1:1
映射规则 full
映射类型 valid
映射状态 [ECUC_Dem_00734]
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemRatio
BSW 参数 DemDiagnosticEventRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 This reference contains the link to a diagnostic event.
模板描述 DiagnosticIumprGroup.iumpr: This reference collects DiagnosticIumpr to a DiagnosticIumprGroup. DiagnosticIumpr.event: This reference represents the DiagnosticEvent that corresponds to the IUMPR computation.
M2 参数 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticIumprGroup. iumpr , DiagnosticExtract::Dem::Diagnostic Event::DiagnosticIumpr. event
映射规则 foreach DiagnosticIumprGroup, follow the iumpr reference and then pick the target of the event reference
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00735]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemRatio
BSW 参数 DemFunctionIdRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 This reference contains the link to a function identifier within the FiM which is used as a primary FID.
模板描述 This meta-class represents the ability to associate a DiagnosticFunctionIdentifier with a DiagnosticIumpr.
M2 参数 DiagnosticExtract::DiagnosticMapping:: DiagnosticIumprToFunctionIdentifierMapping
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00736]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemRatio
BSW 参数 DemIUMPRDenGroup
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 This parameter specifies the assigned denominator type
模板描述 This meta-class represents the ability to model a IUMPR denominator groups.
M2 参数 DiagnosticExtract::Dem::DiagnosticEvent:: DiagnosticIumprDenominatorGroup
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00838]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemRatio/DemIUMPRDenGroup
BSW 参数 DEM_IUMPR_DEN_500MILL
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Condition based on definition of 500miles conditions as defined for OBD2.
模板描述 DiagnosticIumprDenominatorGroup.iumpr: This reference collects DiagnosticIumpr to a DiagnosticIumprDenominatorGroup. Identifiable.category: The category is a keyword that specializes the semantics of the Identifiable. It affects the expected existence of attributes and the applicability of constraints.
M2 参数 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticIumprDenominatorGroup. iumpr , GenericStructure::GeneralTemplate Classes::Identifiable::Identifiable. category
映射规则 DiagnosticIumprDenominatorGroup.category ==IUMPR_DENOMINATOR_500_MILES
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemRatio/DemIUMPRDenGroup
BSW 参数 DEM_IUMPR_DEN_COLDSTART
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Condition based on definition of "cold start" as defined for EU5+
模板描述 DiagnosticIumprDenominatorGroup.iumpr: This reference collects DiagnosticIumpr to a DiagnosticIumprDenominatorGroup. Identifiable.category: The category is a keyword that specializes the semantics of the Identifiable. It affects the expected existence of attributes and the applicability of constraints.
M2 参数 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticIumprDenominatorGroup. iumpr , GenericStructure::GeneralTemplate Classes::Identifiable::Identifiable. category
映射规则 DiagnosticIumprDenominatorGroup == IUMPR_DENOMINATOR_COLDSTART
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemRatio/DemIUMPRDenGroup
BSW 参数 DEM_IUMPR_DEN_CSERS
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Cold start emission reduction strategy" denominator
模板描述 This meta-class represents the ability to model a IUMPR denominator groups.
M2 参数 DiagnosticExtract::Dem::DiagnosticEvent:: DiagnosticIumprDenominatorGroup
映射规则 DiagnosticIumprDenominatorGroup.category == IUMPR_DENOMINATOR_CSERS
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemRatio/DemIUMPRDenGroup
BSW 参数 DEM_IUMPR_DEN_CSERS_API
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Cold start emission reduction strategy" denominator considering additional conditions reported via Dem_RepIUMPRDen Release.
模板描述 This meta-class represents the ability to model a IUMPR denominator groups.
M2 参数 DiagnosticExtract::Dem::DiagnosticEvent:: DiagnosticIumprDenominatorGroup
映射规则 DiagnosticIumprDenominatorGroup.category == IUMPR_DENOMINATOR_CSERS_API
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemRatio/DemIUMPRDenGroup
BSW 参数 DEM_IUMPR_DEN_EVAP
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Condition based on definition of "EVAP" conditions as defined for OBD2.
模板描述 DiagnosticIumprDenominatorGroup.iumpr: This reference collects DiagnosticIumpr to a DiagnosticIumprDenominatorGroup. Identifiable.category: The category is a keyword that specializes the semantics of the Identifiable. It affects the expected existence of attributes and the applicability of constraints.
M2 参数 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticIumprDenominatorGroup. iumpr , GenericStructure::GeneralTemplate Classes::Identifiable::Identifiable. category
映射规则 DiagnosticIumprDenominatorGroup.category == IUMPR_DENOMINATOR_EVAP
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemRatio/DemIUMPRDenGroup
BSW 参数 DEM_IUMPR_DEN_EVAPPURGEFLOW
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Condition based on definition of "EVAP purge flow" conditions
模板描述 This meta-class represents the ability to model a IUMPR denominator groups.
M2 参数 DiagnosticExtract::Dem::DiagnosticEvent:: DiagnosticIumprDenominatorGroup
映射规则 DiagnosticIumprDenominatorGroup.category == IUMPR_DENOMINATOR_ EVAPPURGEFLOW
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemRatio/DemIUMPRDenGroup
BSW 参数 DEM_IUMPR_DEN_NONE
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 No further condition. Denominator increments based on GENERAL_INDIVIDUAL_DENOMINATOR only.
模板描述 DiagnosticIumprDenominatorGroup.iumpr: This reference collects DiagnosticIumpr to a DiagnosticIumprDenominatorGroup. Identifiable.category: The category is a keyword that specializes the semantics of the Identifiable. It affects the expected existence of attributes and the applicability of constraints. M2 Parameter DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticIumprDenominatorGroup. iumpr , GenericStructure::GeneralTemplate Classes::Identifiable::Identifiable. category Mapping Rule DiagnosticIumprDenominatorGroup.category == IUMPR_DENOMINATOR_NONE Mapping Status valid
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemRatio/DemIUMPRDenGroup
BSW 参数 DEM_IUMPR_DEN_PHYS_API
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 GENERAL_INDIVIDUAL_DENOMINATOR condition considering additional physical condition (component activity) computed within the SW-C and reported via Dem_RepIUMPRDenRelease
模板描述 DiagnosticIumprDenominatorGroup.iumpr: This reference collects DiagnosticIumpr to a DiagnosticIumprDenominatorGroup. Identifiable.category: The category is a keyword that specializes the semantics of the Identifiable. It affects the expected existence of attributes and the applicability of constraints.
M2 参数 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticIumprDenominatorGroup. iumpr , GenericStructure::GeneralTemplate Classes::Identifiable::Identifiable. category
映射规则 DiagnosticIumprDenominatorGroup.category == IUMPR_DENOMINATOR_PHYSICAL_API
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemRatio
BSW 参数 DemIUMPRGroup
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 This parameter specifies the assigned IUMPR group of the ratio Id. Template Description DiagnosticIumprGroup.iumprGroupIdentifier: This aggregation allows for the variant modeling of the groupIdentifier. DiagnosticIumprGroupIdentifier.groupId: This attribute shall be taken to define an identifier for the IUMPR group. Please note that the value of this identifier is driven by regulations outside the scope of AUTOSAR and can therefore not be limited to the set of characters suitable for a shortName. M2 Parameter Mapping Type full ECUC Parameter ID DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticIumprGroup. iumprGroupIdentifier , Diagnostic Extract::Dem::DiagnosticEvent::DiagnosticIumprGroupIdentifier. groupId
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00737]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemRatio/DemIUMPRGroup
BSW 参数 DEM_IUMPR_AFRI1
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Air Fuel Ratio Imbalance Monitor Bank 1
模板描述 This attribute shall be taken to define an identifier for the IUMPR group. Please note that the value of this identifier is driven by regulations outside the scope of AUTOSAR and can therefore not be limited to the set of characters suitable for a shortName.
M2 参数 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticIumprGroupIdentifier. groupId
映射规则 If groupIdentifier is set to DEM_IUMPR_AFRI1
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemRatio/DemIUMPRGroup
BSW 参数 DEM_IUMPR_AFRI2
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Air Fuel Ratio Imbalance Monitor Bank 2
模板描述 This attribute shall be taken to define an identifier for the IUMPR group. Please note that the value of this identifier is driven by regulations outside the scope of AUTOSAR and can therefore not be limited to the set of characters suitable for a shortName.
M2 参数 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticIumprGroupIdentifier. groupId
映射规则 If groupIdentifier is set to DEM_IUMPR_AFRI2
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemRatio/DemIUMPRGroup
BSW 参数 DEM_IUMPR_BOOSTPRS
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 This attribute shall be taken to define an identifier for the IUMPR group. Please note that the value of this identifier is driven by regulations outside the scope of AUTOSAR and can therefore not be limited to the set of characters suitable for a shortName.
模板描述 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticIumprGroupIdentifier. groupId
M2 参数 If groupIdentifier is set to DEM_IUMPR_BOOSTPRS
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemRatio/DemIUMPRGroup
BSW 参数 DEM_IUMPR_CAT1
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 This attribute shall be taken to define an identifier for the IUMPR group. Please note that the value of this identifier is driven by regulations outside the scope of AUTOSAR and can therefore not be limited to the set of characters suitable for a shortName.
模板描述 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticIumprGroupIdentifier. groupId
M2 参数 If groupIdentifier is set to DEM_IUMPR_CAT1
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemRatio/DemIUMPRGroup
BSW 参数 DEM_IUMPR_CAT2
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 This attribute shall be taken to define an identifier for the IUMPR group. Please note that the value of this identifier is driven by regulations outside the scope of AUTOSAR and can therefore not be limited to the set of characters suitable for a shortName.
模板描述 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticIumprGroupIdentifier. groupId
M2 参数 If groupIdentifier is set to DEM_IUMPR_CAT2
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemRatio/DemIUMPRGroup
BSW 参数 DEM_IUMPR_EGR
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 This attribute shall be taken to define an identifier for the IUMPR group. Please note that the value of this identifier is driven by regulations outside the scope of AUTOSAR and can therefore not be limited to the set of characters suitable for a shortName.
模板描述 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticIumprGroupIdentifier. groupId
M2 参数 if groupIdentifier is set to DEM_IUMPR_EGR
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemRatio/DemIUMPRGroup
BSW 参数 DEM_IUMPR_EGSENSOR
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 This attribute shall be taken to define an identifier for the IUMPR group. Please note that the value of this identifier is driven by regulations outside the scope of AUTOSAR and can therefore not be limited to the set of characters suitable for a shortName.
模板描述 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticIumprGroupIdentifier. groupId
M2 参数 If groupIdentifier is set to DEM_IUMPR_EGSENSOR.
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemRatio/DemIUMPRGroup
BSW 参数 DEM_IUMPR_EVAP
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 This attribute shall be taken to define an identifier for the IUMPR group. Please note that the value of this identifier is driven by regulations outside the scope of AUTOSAR and can therefore not be limited to the set of characters suitable for a shortName.
模板描述 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticIumprGroupIdentifier. groupId
M2 参数 If groupIdentifier is set to DEM_IUMPR_EVAP
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemRatio/DemIUMPRGroup
BSW 参数 DEM_IUMPR_FLSYS
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 This attribute shall be taken to define an identifier for the IUMPR group. Please note that the value of this identifier is driven by regulations outside the scope of AUTOSAR and can therefore not be limited to the set of characters suitable for a shortName.
模板描述 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticIumprGroupIdentifier. groupId
M2 参数 If groupIdentifier is set to DEM_IUMPR_FLSYS
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemRatio/DemIUMPRGroup
BSW 参数 DEM_IUMPR_NMHCCAT
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 This attribute shall be taken to define an identifier for the IUMPR group. Please note that the value of this identifier is driven by regulations outside the scope of AUTOSAR and can therefore not be limited to the set of characters suitable for a shortName.
模板描述 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticIumprGroupIdentifier. groupId
M2 参数 If groupIdentifier is set to DEM_IUMPR_NMHCCAT
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemRatio/DemIUMPRGroup
BSW 参数 DEM_IUMPR_NOXADSORB
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 This attribute shall be taken to define an identifier for the IUMPR group. Please note that the value of this identifier is driven by regulations outside the scope of AUTOSAR and can therefore not be limited to the set of characters suitable for a shortName.
模板描述 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticIumprGroupIdentifier. groupId
M2 参数 If groupIdentifier is set to DEM_IUMPR_NOXADSORB
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemRatio/DemIUMPRGroup
BSW 参数 DEM_IUMPR_NOXCAT
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 This attribute shall be taken to define an identifier for the IUMPR group. Please note that the value of this identifier is driven by regulations outside the scope of AUTOSAR and can therefore not be limited to the set of characters suitable for a shortName.
模板描述 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticIumprGroupIdentifier. groupId
M2 参数 If groupIdentifier is set to DEM_IUMPR_NOXCAT
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemRatio/DemIUMPRGroup
BSW 参数 DEM_IUMPR_OXS1
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 This attribute shall be taken to define an identifier for the IUMPR group. Please note that the value of this identifier is driven by regulations outside the scope of AUTOSAR and can therefore not be limited to the set of characters suitable for a shortName.
模板描述 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticIumprGroupIdentifier. groupId
M2 参数 If groupIdentifier ist set to DEM_IUMPR_OXS1
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemRatio/DemIUMPRGroup
BSW 参数 DEM_IUMPR_OXS2
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 This attribute shall be taken to define an identifier for the IUMPR group. Please note that the value of this identifier is driven by regulations outside the scope of AUTOSAR and can therefore not be limited to the set of characters suitable for a shortName.
模板描述 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticIumprGroupIdentifier. groupId
M2 参数 If groupIdentifier is set to DEM_IUMPR_OSX2
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemRatio/DemIUMPRGroup
BSW 参数 DEM_IUMPR_PF1
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Particulate Filter Monitor Bank 1
模板描述 This attribute shall be taken to define an identifier for the IUMPR group. Please note that the value of this identifier is driven by regulations outside the scope of AUTOSAR and can therefore not be limited to the set of characters suitable for a shortName.
M2 参数 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticIumprGroupIdentifier. groupId
映射规则 If groupIdentifier is set to DEM_IUMPR_PF1
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemRatio/DemIUMPRGroup
BSW 参数 DEM_IUMPR_PF2
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Particulate Filter Monitor Bank 2
模板描述 This attribute shall be taken to define an identifier for the IUMPR group. Please note that the value of this identifier is driven by regulations outside the scope of AUTOSAR and can therefore not be limited to the set of characters suitable for a shortName.
M2 参数 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticIumprGroupIdentifier. groupId
映射规则 If groupIdentifier is set to DEM_IUMPR_PF2
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemRatio/DemIUMPRGroup
BSW 参数 DEM_IUMPR_PMFILTER
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 This attribute shall be taken to define an identifier for the IUMPR group. Please note that the value of this identifier is driven by regulations outside the scope of AUTOSAR and can therefore not be limited to the set of characters suitable for a shortName.
模板描述 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticIumprGroupIdentifier. groupId
M2 参数 If groupIdentifier is set to DEM_IUMPR_PMFILTER
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemRatio/DemIUMPRGroup
BSW 参数 DEM_IUMPR_PRIVATE
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 This attribute shall be taken to define an identifier for the IUMPR group. Please note that the value of this identifier is driven by regulations outside the scope of AUTOSAR and can therefore not be limited to the set of characters suitable for a shortName.
模板描述 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticIumprGroupIdentifier. groupId
M2 参数 If groupIdentifier is set to DEM_IUMPR_PRIVATE
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemRatio/DemIUMPRGroup
BSW 参数 DEM_IUMPR_SAIR
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 This attribute shall be taken to define an identifier for the IUMPR group. Please note that the value of this identifier is driven by regulations outside the scope of AUTOSAR and can therefore not be limited to the set of characters suitable for a shortName.
模板描述 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticIumprGroupIdentifier. groupId
M2 参数 If groupIdentifier is set to DEM_IUMPR_SAIR
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemRatio/DemIUMPRGroup
BSW 参数 DEM_IUMPR_SECOXS1
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 This attribute shall be taken to define an identifier for the IUMPR group. Please note that the value of this identifier is driven by regulations outside the scope of AUTOSAR and can therefore not be limited to the set of characters suitable for a shortName.
模板描述 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticIumprGroupIdentifier. groupId
M2 参数 If groupIdentifier is set to DEM_IUMPR_SECOXS1
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemRatio/DemIUMPRGroup
BSW 参数 DEM_IUMPR_SECOXS2
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 This attribute shall be taken to define an identifier for the IUMPR group. Please note that the value of this identifier is driven by regulations outside the scope of AUTOSAR and can therefore not be limited to the set of characters suitable for a shortName.
模板描述 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticIumprGroupIdentifier. groupId
M2 参数 If groupIdentifier is set to DEM_IUMPR_SECOXS2
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemRatio
BSW 参数 DemRatioKind
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 This parameter defines whether the ratio will be calculated API or observer based.
模板描述 This attribute controls the behavior of how the ratio is calculated.
M2 参数 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticIumpr. ratioKind
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00741]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemRatio/DemRatioKind
BSW 参数 DEM_RATIO_API
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 API based ratio Id
模板描述 The calculation is based on the usage of an API.
M2 参数 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticIumprKindEnum. apiBased
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemRatio/DemRatioKind
BSW 参数 DEM_RATIO_OBSERVER
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Observer based ratio Id
模板描述 The calculation is based on the usage of an observer.
M2 参数 DiagnosticExtract::Dem::DiagnosticEvent::DiagnosticIumprKindEnum. observerBased
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral
BSW 参数 DemResetConfirmedBitOnOverflow
BSW 类型 ECUC-BOOLEAN-PARAM-DEF
BSW 说明 This configuration switch defines, whether the confirmed bit is reset or not while an event memory entry will be displaced.
模板描述 This attribute defines, whether the confirmed bit is reset or not while an event memory entry will be displaced.
M2 参数 DiagnosticExtract::DiagnosticCommonProps::DiagnosticCommonProps. resetConfirmedBitOnOverflow
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00799]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral
BSW 参数 DemResetPendingBitOnOverflow
BSW 类型 ECUC-BOOLEAN-PARAM-DEF
BSW 说明 This configuration switch defines, whether the pending bit is reset or not while an event memory entry will be displaced.
模板描述 This attribute defines, whether the pending bit is reset or not while an event memory entry will be displaced. In order to be compliant to ISO 14229-1 [1], this parameter needs to be set to "false".
M2 参数 DiagnosticExtract::DiagnosticCommonProps::DiagnosticCommonProps. resetPendingBitOnOverflow
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00991]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral
BSW 参数 DemStatusBitHandlingTestFailedSinceLastClear
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 This configuration switch defines, whether the aging and displacement mechanism shall be applied to the "TestFailedSince LastClear" status bits.
模板描述 This attribute defines, whether the aging and displacement mechanism shall be applied to the "TestFailedSinceLastClear" status bits. On the classic platform, the value of this attribute has to be identical for each DiagnosticMemoryDestination.
M2 参数 DiagnosticExtract::Dem::DiagnosticMemoryDestination::DiagnosticMemoryDestination. statusBitHandlingTestFailedSinceLastClear
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00784]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral
BSW 参数 DemStatusBitStorageTestFailed
BSW 类型 ECUC-BOOLEAN-PARAM-DEF
BSW 说明 Activate/Deactivate the permanent storage of the "TestFailed" status bits. true: storage activated false: storage deactivated
模板描述 This parameter is used to activate/deactivate the permanent storage of the "TestFailed" status bits. true: storage activated false: storage deactivated
M2 参数 DiagnosticExtract::Dem::DiagnosticMemoryDestination::DiagnosticMemoryDestination. statusBitStorageTestFailed
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00714]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral
BSW 参数 DemStorageCondition
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 This container contains the configuration (parameters) for storage conditions.
模板描述 Specification of a storage condition. Document ID 673: AUTOSAR_CP_TPS_DiagnosticExtractTemplate
M2 参数 DiagnosticExtract::Dem::DiagnosticCondition:: DiagnosticStorageCondition
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00728]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemStorageCondition
BSW 参数 DemStorageConditionReplacementEventRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Specifies the reference to an event which is stored to event memory and supports failure analysis.
模板描述 Reference to a DiagnosticEvent to which a StorageConditionGroup is assigned.
M2 参数 DiagnosticExtract::DiagnosticMapping::DiagnosticEventToStorageConditionGroupMapping. diagnosticEvent
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00893]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemStorageCondition
BSW 参数 DemStorageConditionStatus
BSW 类型 ECUC-BOOLEAN-PARAM-DEF
BSW 说明 Defines the initial status for enable or disable of storage of a diagnostic event. The value is the initialization after power up (before this condition is reported the first time). true: storage of a diagnostic event enabled false: storage of a diagnostic event disabled
模板描述 Defines the initial status for enable or disable of acceptance/storage of event reports of a diagnostic event. The value is the initialization after power up (before this condition is reported the first time). true: acceptance/storage of a diagnostic event enabled false: acceptance/storage of a diagnostic event disabled
M2 参数 DiagnosticExtract::Dem::DiagnosticCondition::DiagnosticCondition. initValue
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00731]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral
BSW 参数 DemStorageConditionGroup
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 This container contains the configuration (parameters) for storage condition groups.
模板描述 Storage condition group which includes one or several storage conditions.
M2 参数 DiagnosticExtract::Dem::DiagnosticConditionGroup:: DiagnosticStorageConditionGroup
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00773]
属性 值
BSW 模块 Dem
BSW 上下文 Dem/DemGeneral/DemStorageConditionGroup
BSW 参数 DemStorageConditionRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 References an enable condition.
模板描述 Reference to storageConditions that are part of the StorageConditionGroup.
M2 参数 DiagnosticExtract::Dem::DiagnosticConditionGroup::DiagnosticStorageConditionGroup. storageCondition
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_Dem_00768]

G.4. FiM

属性 值
BSW 模块 FiM
BSW 上下文 FiM/FiMConfigSet
BSW 参数 FiMFID
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 This container includes symbolic names of all FIDs.
模板描述 FunctionInhibitionNeeds: Specifies the abstract needs on the configuration of the Function Inhibition Manager for one Function Identifier (FID). This class currently contains no attributes. Its name can be regarded as a symbol identifying the FID from the viewpoint of the component or module which owns this class. DiagnosticFunctionIdentifier: This meta-class represents a diagnostic function identifier (a.k.a. FID).
M2 参数 CommonStructure::ServiceNeeds:: FunctionInhibitionNeeds , DiagnosticExtract::Fim:: DiagnosticFunctionIdentifier
映射规则 In case the owner of the FunctionInhibitionNeeds is a BSW module then the FiMFID.shortName= {capitalizedMip}_{ServiceDependency.symbolicNameProps.symbol}.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_FiM_00039]
属性 值
BSW 模块 FiM
BSW 上下文 FiM/FiMConfigSet
BSW 参数 FiMInhibitionConfiguration
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 This container includes all configuration parameters concerning the relationship between event and FID.
模板描述 This meta-class represents the ability to define the inhibition of a specific function identifier within the Fim configuration.
M2 参数 DiagnosticExtract::Fim:: DiagnosticFunctionIdentifierInhibit
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_FiM_00038]
属性 值
BSW 模块 FiM
BSW 上下文 FiM/FiMConfigSet/FiMInhibitionConfiguration
BSW 参数 FiMInhEventRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Selection of an single DEM Event.
模板描述 This represents the alias event applicable for the referencing inhibition source.
M2 参数 DiagnosticExtract::Fim::DiagnosticFunctionInhibitSource. event
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_FiM_00100]
属性 值
BSW 模块 FiM
BSW 上下文 FiM/FiMConfigSet/FiMInhibitionConfiguration
BSW 参数 FiMInhInhibitionMask
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 The configuration parameter is used to specify the inhibition mask for an event - FID relation.
模板描述 This represents the value of the inhibition mask behavior.
M2 参数 DiagnosticExtract::Fim::DiagnosticFunctionIdentifierInhibit. inhibitionMask
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_FiM_00096]
属性 值
BSW 模块 FiM
BSW 上下文 FiM/FiMConfigSet/FiMInhibitionConfiguration/FiMInhInhibitionMask
BSW 参数 FIM_LAST_FAILED
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Last Failed - DEM_UDS_STATUS_TF flag of Dem Eventstatus is set Use case: Re-configuration, avoiding follow-up errors
模板描述 This represents the inhibition mask behavior "last failed".
M2 参数 DiagnosticExtract::Fim::DiagnosticInhibitionMaskEnum. lastFailed
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 FiM
BSW 上下文 FiM/FiMConfigSet/FiMInhibitionConfiguration/FiMInhInhibitionMask
BSW 参数 FIM_NOT_TESTED
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Not Tested this cycle - DEM_UDS_STATUS_TNCTOC flag of Dem Eventstatus is set. Use case: Scheduling of monitors.
模板描述 This represents the inhibition mask behavior "not tested".
M2 参数 DiagnosticExtract::Fim::DiagnosticInhibitionMaskEnum. notTested
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 FiM
BSW 上下文 FiM/FiMConfigSet/FiMInhibitionConfiguration/FiMInhInhibitionMask
BSW 参数 FIM_TESTED
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Tested - DEM_UDS_STATUS_TNCTOC flag of Dem Eventstatus is not set. Use case: Self deactivation, check during driving cycle.
模板描述 This represents the inhibition mask behavior "tested".
M2 参数 DiagnosticExtract::Fim::DiagnosticInhibitionMaskEnum. tested
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 FiM
BSW 上下文 FiM/FiMConfigSet/FiMInhibitionConfiguration/FiMInhInhibitionMask
BSW 参数 FIM_TESTED_AND_FAILED
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 Tested and Failed - DEM_UDS_STATUS_TF flag of Dem Eventstatus is set and DEM_UDS_STATUS_TNCTOC flag is not set Use case: Avoiding deadlocks, repeated monitoring.
模板描述 This represents the inhibition mask behavior "tested and failed".
M2 参数 DiagnosticExtract::Fim::DiagnosticInhibitionMaskEnum. testedAndFailed
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID —
属性 值
BSW 模块 FiM
BSW 上下文 FiM/FiMConfigSet
BSW 参数 FiMSummaryEvent
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF BSW Description The summarized EventId definition record consists of a summarized event ID and specific Dem Events. This record means that a particular FID that has to be disabled in case of summarized event (defined above) is to be disabled in any of the specific events. A possible solution could be assigning events as summarized events along with a list of specific events. During the configuration process the summarized event substitutes the referenced single events. However, it is not outlined how this requirement is solved - whether by configuration process or by implementation within the FiM. The FiM configuration tool could also build up a suitable data structure for summarized events and deal with it in the FiM implementation. Template Description This meta-class represents the ability to model a Fim event group, also known as a summary event in Fim terminology. This represents a group of single diagnostic events.
M2 参数 DiagnosticExtract::Fim:: DiagnosticFimEventGroup
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_FiM_00603]

G.5. IdsM

属性 值
BSW 模块 IdsM
BSW 上下文 IdsM/IdsMConfiguration/IdsMEvent
BSW 参数 IdsMSinkDem
BSW 类型 ECUC-BOOLEAN-PARAM-DEF
BSW 说明 The QSEv will be sent to the Dem Module into a Security Event Memory (Sem) to persist it on the local ECU.
模板描述 This meta-class represents the ability to map a security event that is defined in the context of the Security Extract to a diagnostic event defined on the context of the DiagnosticExtract.
M2 参数 DiagnosticExtract::DiagnosticMapping:: DiagnosticEventToSecurityEventMapping
映射规则 If the (M2) DiagnosticEventToSecurityEventMapping of the DEXT defines a mapping between the (M2) SecurityEventDefinition corresponding to the enclosing IdsMEvent and a (M2) Diagnostic Event, then IdsMSinkDem = TRUE. Otherwise, IdsMSinkDem = FALSE.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_IdsM_00035]

G.6. J1939Dcm

属性 值
BSW 模块 J1939Dcm
BSW 上下文 J1939Dcm/J1939DcmConfigSet/J1939DcmChannel
BSW 参数 J1939DcmBusType
BSW 类型 ECUC-ENUMERATION-PARAM-DEF
BSW 说明 Identifies the communication port
模板描述 This represents the network ID for the J1939 cluster.
M2 参数 SystemTemplate::Fibex::Fibex4Can::CanTopology::J1939Cluster. networkId
映射规则 value 1 maps to J1939DCM_J1939_NETWORK_1 value 2 maps to J1939DCM_J1939_ NETWORK_2 value 3 maps to J1939DCM_J1939_NETWORK_3 value 4 maps to J1939DCM_ J1939_NETWORK_4
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_J1939Dcm_- 00039]
属性 值
BSW 模块 J1939Dcm
BSW 上下文 J1939Dcm/J1939DcmConfigSet/J1939DcmDspExternalSRDataElementClass/J1939DcmData ElementInstance
BSW 参数 J1939DcmDataElementInstanceRef
BSW 类型 ECUC-INSTANCE-REFERENCE-DEF
BSW 说明 Instance Reference to the primitive data which shall be read or written. Supported are VariableDataPrototypes in Sender ReceiverInterfaces and NvDataInterfaces and ParameterDataPrototypes in ParameterInterfaces (read only). This reference is applicable if the AutosarDataPrototype is typed with a ApplicationPrimitiveDataType of category VALUE or BOOLEAN or if the AutosarDataPrototype is typed with a ImplementationDataType of category VALUE or TYPE_REFERENCE that in turn boils down to VALUE Template Description This represents the dataElement in the application software that is accessed for diagnostic purpose. This role is applicable on the classic platform. DiagnosticExtract::DiagnosticMapping::ServiceMapping::DiagnosticServiceDataMapping. mappedDataElement
M2 参数 DiagnosticServiceDataMapping maps to a primitive data.
映射规则 full
映射类型 valid
映射状态 [ECUC_J1939Dcm_- 00067]
ECUC 参数 ID —
属性 值
BSW 模块 J1939Dcm
BSW 上下文 J1939Dcm/J1939DcmConfigSet/J1939DcmDspExternalSRDataElementClass/J1939DcmSub ElementInDataElementInstance
BSW 参数 J1939DcmSubElementInDataElementInstanceRef
BSW 类型 ECUC-INSTANCE-REFERENCE-DEF
BSW 说明 Instance Reference to the primitve sub-element (at any level) of composite data in a port which shall be read. Supported are VariableDataPrototypes in SenderReceiverInterfaces and NvDataInterfaces and ParameterDataPrototypes in Parameter Interfaces (read only). This reference is applicable if the AutosarDataPrototype is typed with a ApplicationCompositeData Type.
模板描述 This represents the dataElement in the application software that is accessed for diagnostic purpose. This role is applicable on the classic platform.
M2 参数 DiagnosticExtract::DiagnosticMapping::ServiceMapping::DiagnosticServiceDataMapping. mappedDataElement
映射规则 DiagnosticServiceDataMapping maps to a primitive element within a composite data, where the AutosarDataPrototype is typed with a ApplicationCompositeDataType.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_J1939Dcm_- 00066]
属性 值
BSW 模块 J1939Dcm
BSW 上下文 J1939Dcm/J1939DcmConfigSet/J1939DcmDspExternalSRDataElementClass/J1939DcmSub ElementInImplDataElementInstance
BSW 参数 J1939DcmSubElementInImplDataElementInstanceRef
BSW 类型 ECUC-INSTANCE-REFERENCE-DEF
BSW 说明 Instance Reference to the primitve sub-element (at any level) of composite data in a port which shall be read. Supported are VariableDataPrototypes in SenderReceiverInterfaces and NvDataInterfaces and ParameterDataPrototypes in Parameter Interfaces (read only). This reference is applicable if the AutosarDataPrototype is typed with a ImplementationDataType of category STRUCTURE or ARRAY. Please note that in case of ARRAY the index attribute in the target reference has to be set to select a single array element.
模板描述 This represents the dataElement in the application software that is accessed for diagnostic purpose. This role is applicable on the classic platform.
M2 参数 DiagnosticExtract::DiagnosticMapping::ServiceMapping::DiagnosticServiceDataMapping. mappedDataElement
映射规则 DiagnosticServiceDataMapping maps to a primitive element within a composite data, where the AutosarDataPrototype is typed with a ApplicationCompositeDataType ImplementationDataType of category STRUCTURE or ARRAY.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_J1939Dcm_- 00068]
属性 值
BSW 模块 J1939Dcm
BSW 上下文 J1939Dcm/J1939DcmConfigSet/J1939DcmNode
BSW 参数 J1939DcmServiceOnlyDTCsMemoryDestinationRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Reference to the user defined memory used for the Service Only DTCs handled by DM53, DM54, and DM55.
模板描述 DiagnosticExtract::Dem::DiagnosticTroubleCode::DiagnosticTroubleCodeProps. memoryDestination
M2 参数 This upstream mapping shall only exist for a DiagnosticTroubleCodeJ1939 with attribute kind set to serviceOnly that references the DiagnosticTroubleCodeProps that owns the memoryDestination.
映射规则 full
映射类型 valid
映射状态 [ECUC_J1939Dcm_- 00051]
ECUC 参数 ID —
属性 值
BSW 模块 J1939Dcm
BSW 上下文 J1939Dcm/J1939DcmConfigSet/J1939DcmProcessingConditions
BSW 参数 J1939DcmModeCondition
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 This container contains the configuration of a mode condition or an environmental conditions which can be used as argument in J1939DcmModeRules. One J1939DcmModeCondition shall contain either one J1939DcmSwcModeRef or one J1939DcmBswModeRef or one J1939DcmSwcSRDataElementRef. Please note that the J1939Dcm acts as well as mode manager. Therefore the references J1939DcmSwcModeRef or one J1939DcmBswModeRef might point to provided ModeDeclarationGroupPrototypes of the J1939Dcm itself as well as to provided ModeDeclarationGroupPrototypes of other Bsw Modules or software components. In case of a configured J1939DcmSwcModeRef or J1939DcmBswModeRef only the J1939DcmConditionType J1939DCM_ EQUALS or J1939DCM_EQUALS_NOT are applicable. In case of J1939DcmSwcSRDataElementRef all literals of J1939DcmConditionType are possible. Template Description DiagnosticCompareConditions are atomic conditions. They are based on the idea of a comparison at runtime of some variable data with something constant. The type of the comparison (==, !=, <, <=, ...) is specified in DiagnosticCompare Condition.compareType. M2 Parameter DiagnosticExtract::Dcm::EnvironmentalCondition:: DiagnosticEnvCompareCondition Depending on the reference a DcmModeCondition is mapped to a DiagnosticEnvModeCondition if only one reference is present and reference is a DcmSwcModeRef or a DcmBswModeRef. If two references are present, a DcmSwcSRDataElementRef and a DcmSwcSRDataElementValueRef, then DcmModeCondition is mapped to a DiagnosticEnvDataCondition.
映射规则 full
映射类型 valid
映射状态 [ECUC_J1939Dcm_- 00071]
ECUC 参数 ID —
属性 值
BSW 模块 J1939Dcm
BSW 上下文 J1939Dcm/J1939DcmConfigSet/J1939DcmProcessingConditions/J1939DcmModeCondition
BSW 参数 J1939DcmBswModeRef
BSW 类型 ECUC-INSTANCE-REFERENCE-DEF BSW Description This parameter references a mode of a ModeDeclarationGroupPrototype provided by a Basic Software Module used for the condition. Please note that such ModeDeclarationGroupPrototype are owned by a Basic Software Module Description in the role providedModeGroup. Template Description This reference represents both the ModeDeclarationGroupPrototype and the ModeDeclaration relevant for the mode comparison. M2 Parameter DiagnosticExtract::Dcm::EnvironmentalCondition::DiagnosticEnvModeCondition. modeElement
映射规则 For DcmModeRef a new DiagnosticEnvBswModeElement is used, pointing to the ModeDeclaration via ModeInModuleDescriptionInstanceRef. This new DiagnosticEnvModeElement shall be aggregated by the same DiagnosticEnvironmentalConfition as the DiagnosticEnvModeCondition, in which the target of the reference DiagnosticEnvModeCondition.modeElement points to the this DiagnosticEnvModeElement.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_J1939Dcm_- 00059]
属性 值
BSW 模块 J1939Dcm
BSW 上下文 J1939Dcm/J1939DcmConfigSet/J1939DcmProcessingConditions/J1939DcmModeCondition/ J1939DcmConditionType
BSW 参数 J1939DCM_EQUALS
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 DiagnosticCompareTypeEnum.isEqual: equal DiagnosticEnvCompareCondition.compareType: This attributes represents the concrete type of the comparison.
模板描述 DiagnosticExtract::Dcm::EnvironmentalCondition::DiagnosticCompareTypeEnum. isEqual , Diagnostic Extract::Dcm::EnvironmentalCondition::DiagnosticEnvCompareCondition. compareType
M2 参数 1:1 mapping
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 J1939Dcm
BSW 上下文 J1939Dcm/J1939DcmConfigSet/J1939DcmProcessingConditions/J1939DcmModeCondition/ J1939DcmConditionType
BSW 参数 J1939DCM_EQUALS_NOT
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 DiagnosticCompareTypeEnum.isNotEqual: not equal DiagnosticEnvCompareCondition.compareType: This attributes represents the concrete type of the comparison.
模板描述 DiagnosticExtract::Dcm::EnvironmentalCondition::DiagnosticCompareTypeEnum. isNotEqual , Diagnostic Extract::Dcm::EnvironmentalCondition::DiagnosticEnvCompareCondition. compareType
M2 参数 1:1 mapping
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 J1939Dcm
BSW 上下文 J1939Dcm/J1939DcmConfigSet/J1939DcmProcessingConditions/J1939DcmModeCondition/ J1939DcmConditionType
BSW 参数 J1939DCM_GREATER_OR_EQUAL
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 DiagnosticCompareTypeEnum.isGreaterOrEqual: greater than or equal DiagnosticEnvCompareCondition.compareType: This attributes represents the concrete type of the comparison.
模板描述 DiagnosticExtract::Dcm::EnvironmentalCondition::DiagnosticCompareTypeEnum. isGreaterOrEqual , Diagnostic Extract::Dcm::EnvironmentalCondition::DiagnosticEnvCompareCondition. compareType
M2 参数 1:1 mapping
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 J1939Dcm
BSW 上下文 J1939Dcm/J1939DcmConfigSet/J1939DcmProcessingConditions/J1939DcmModeCondition/ J1939DcmConditionType
BSW 参数 J1939DCM_GREATER_THAN
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 DiagnosticCompareTypeEnum.isGreaterThan: greater than DiagnosticEnvCompareCondition.compareType: This attributes represents the concrete type of the comparison.
模板描述 DiagnosticExtract::Dcm::EnvironmentalCondition::DiagnosticCompareTypeEnum. isGreaterThan , Diagnostic Extract::Dcm::EnvironmentalCondition::DiagnosticEnvCompareCondition. compareType
M2 参数 1:1 mapping
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 J1939Dcm
BSW 上下文 J1939Dcm/J1939DcmConfigSet/J1939DcmProcessingConditions/J1939DcmModeCondition/ J1939DcmConditionType
BSW 参数 J1939DCM_LESS_OR_EQUAL
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 DiagnosticCompareTypeEnum.isLessOrEqual: less than or equal DiagnosticEnvCompareCondition.compareType: This attributes represents the concrete type of the comparison.
模板描述 DiagnosticExtract::Dcm::EnvironmentalCondition::DiagnosticCompareTypeEnum. isLessOrEqual , Diagnostic Extract::Dcm::EnvironmentalCondition::DiagnosticEnvCompareCondition. compareType
M2 参数 1:1 mapping
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 J1939Dcm
BSW 上下文 J1939Dcm/J1939DcmConfigSet/J1939DcmProcessingConditions/J1939DcmModeCondition/ J1939DcmConditionType
BSW 参数 J1939DCM_LESS_THAN
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 DiagnosticCompareTypeEnum.isLessThan: less than DiagnosticEnvCompareCondition.compareType: This attributes represents the concrete type of the comparison.
模板描述 DiagnosticExtract::Dcm::EnvironmentalCondition::DiagnosticCompareTypeEnum. isLessThan , Diagnostic Extract::Dcm::EnvironmentalCondition::DiagnosticEnvCompareCondition. compareType
M2 参数 1:1 mapping
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 J1939Dcm
BSW 上下文 J1939Dcm/J1939DcmConfigSet/J1939DcmProcessingConditions/J1939DcmModeCondition
BSW 参数 J1939DcmSwcModeRef
BSW 类型 ECUC-INSTANCE-REFERENCE-DEF
BSW 说明 This parameter references a mode in a particular mode request port of a software component that is used for the condition.
模板描述 This reference represents both the ModeDeclarationGroupPrototype and the ModeDeclaration relevant for the mode comparison.
M2 参数 DiagnosticExtract::Dcm::EnvironmentalCondition::DiagnosticEnvModeCondition. modeElement
映射规则 For DcmModeRef a new DiagnosticEnvSwcModeElement is used, pointing to the ModeDeclaration via PModeInSystemInstanceRef. This new DiagnosticEnvModeElement shall be aggregated by the same DiagnosticEnvironmentalConfition as the DiagnosticEnvModeCondition, in which the target of the reference DiagnosticEnvModeCondition.modeElement points to the this DiagnosticEnvMode Element.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_J1939Dcm_- 00058]
属性 值
BSW 模块 J1939Dcm
BSW 上下文 J1939Dcm/J1939DcmConfigSet/J1939DcmProcessingConditions/J1939DcmModeCondition
BSW 参数 J1939DcmSwcSRDataElementRef
BSW 类型 ECUC-REFERENCE-DEF
BSW 说明 Reference to environmental conditions. It is possible to reference a S/R Receiver-Port to read physical values and compare (equal, greater, less,...) them with a configured value that is defined by J1939DcmSwcSRDataElementValue.
模板描述 This reference represents the related diagnostic data element.
M2 参数 DiagnosticExtract::Dcm::EnvironmentalCondition::DiagnosticEnvDataCondition. dataElement
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_J1939Dcm_- 00060]
属性 值
BSW 模块 J1939Dcm
BSW 上下文 J1939Dcm/J1939DcmConfigSet/J1939DcmProcessingConditions/J1939DcmModeCondition/ J1939DcmSwcSRDataElementValue/J1939DcmSwcSRDataElementArray/J1939DcmSwcSRData ElementArrayElement
BSW 参数 J1939DcmSwcSRDataElementArrayElementIndex
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Index to an array SR data element.
模板描述 This attribute represents a fixed compare value taken to evaluate the compare condition.
M2 参数 DiagnosticExtract::Dcm::EnvironmentalCondition::DiagnosticEnvDataCondition. compareValue
映射规则 DiagnosticDataElement referenced by the DiagnosticEnvDataCondition is an array.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_J1939Dcm_- 00078]
属性 值
BSW 模块 J1939Dcm
BSW 上下文 J1939Dcm/J1939DcmConfigSet/J1939DcmProcessingConditions/J1939DcmModeCondition/ J1939DcmSwcSRDataElementValue/J1939DcmSwcSRDataElementArray/J1939DcmSwcSRData ElementArrayElement
BSW 参数 J1939DcmSwcSRDataElementArrayElementValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Value of an array SR data element compare value.
模板描述 This attribute represents a fixed compare value taken to evaluate the compare condition.
M2 参数 DiagnosticExtract::Dcm::EnvironmentalCondition::DiagnosticEnvDataCondition. compareValue
映射规则 DiagnosticDataElement referenced by the DiagnosticEnvDataCondition is an array.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_J1939Dcm_- 00079]
属性 值
BSW 模块 J1939Dcm
BSW 上下文 J1939Dcm/J1939DcmConfigSet/J1939DcmProcessingConditions/J1939DcmModeCondition/ J1939DcmSwcSRDataElementValue/J1939DcmSwcSRDataElementPrimitive
BSW 参数 J1939DcmSwcSRDataElementPrimitiveValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Reference to a primitive SR data element compare value.
模板描述 This attribute represents a fixed compare value taken to evaluate the compare condition.
M2 参数 DiagnosticExtract::Dcm::EnvironmentalCondition::DiagnosticEnvDataCondition. compareValue
映射规则 DiagnosticDataElement referenced by the DiagnosticEnvDataCondition is primitive.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_J1939Dcm_- 00077]
属性 值
BSW 模块 J1939Dcm
BSW 上下文 J1939Dcm/J1939DcmConfigSet/J1939DcmProcessingConditions
BSW 参数 J1939DcmModeRule
BSW 类型 ECUC-PARAM-CONF-CONTAINER-DEF
BSW 说明 This container contains the configuration of a mode rule which represents a logical expression with J1939DcmMode Conditions or other J1939DcmModeRules as arguments. All arguments are processed with the operator defined by DcmLogicalOperator, for instance: Argument_A AND Argument_B AND Argument_C Template Description A DiagnosticEnvConditionFormula embodies the computation instruction that is to be evaluated at runtime to determine if the DiagnosticEnvironmentalCondition is currently present (i.e. the formula is evaluated to true) or not (otherwise). The formula itself consists of parts which are combined by the logical operations specified by DiagnosticEnvConditionFormula.op. If a diagnostic functionality cannot be executed because an environmental condition fails then the diagnostic stack shall send a negative response code (NRC) back to the client. The value of the NRC is directly related to the specific formula and is therefore formalized in the attribute DiagnosticEnvConditionFormula.nrcValue.
M2 参数 DiagnosticExtract::Dcm::EnvironmentalCondition:: DiagnosticEnvConditionFormula
映射规则 A DcmModeRule is mapped to a DiagnosticEnvConditionFormula, if this DcmModeRule is a subrule, i.e. it is referenced by a DcmArgumentRef. In addition, a new DiagnosticEnvironmental Condition shall be created with DiagnosticEnvironmentalCondition.formula containing a Diagnostic EnvConditionFormula. In both cases, if no DcmLogicalOperator is present in this DcmModeRule, then DiagnosticEnvConditionFormula shall be set to DiagnosticLogicalOperatorEnum.logicalAnd.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_J1939Dcm_- 00053]
属性 值
BSW 模块 J1939Dcm
BSW 上下文 J1939Dcm/J1939DcmConfigSet/J1939DcmProcessingConditions/J1939DcmModeRule
BSW 参数 J1939DcmArgumentRef
BSW 类型 ECUC-CHOICE-REFERENCE-DEF
BSW 说明 This is a choice reference either to a mode condition or a an other mode rule serving as sub-expression.
模板描述 A DiagnosticEnvConditionFormulaPart can either be a atomic condition, e.g. a DiagnosticEnvCompareCondition, or a DiagnosticEnvConditionFormula, again, which allows arbitrary nesting.
M2 参数 DiagnosticExtract::Dcm::EnvironmentalCondition:: DiagnosticEnvConditionFormulaPart
映射规则 Depending on the destination, one DcmArgumentRef is mapped to a DiagnosticEnvCondition Formula if "destination" is a DcmModeRule, and to a DiagnosticEnvCompareCondition, if "destination" is a DcmModeCondition. The order of the aggregation of the DiagnosticEnvCondition FormulaParts shall correspond to the ordering of the index of the DcmArgumentRefs.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_J1939Dcm_- 00055]
属性 值
BSW 模块 J1939Dcm
BSW 上下文 J1939Dcm/J1939DcmConfigSet/J1939DcmProcessingConditions/J1939DcmModeRule/ J1939DcmLogicalOperator
BSW 参数 J1939DCM_AND
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 DiagnosticEnvConditionFormula.op: This attribute represents the concrete operator (supported operators: and, or) of the condition formula. DiagnosticLogicalOperatorEnum.logicalAnd: Logical AND
模板描述 DiagnosticExtract::Dcm::EnvironmentalCondition::DiagnosticEnvConditionFormula. op , Diagnostic Extract::Dcm::EnvironmentalCondition::DiagnosticLogicalOperatorEnum. logicalAnd
M2 参数 1:1 mapping
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 J1939Dcm
BSW 上下文 J1939Dcm/J1939DcmConfigSet/J1939DcmProcessingConditions/J1939DcmModeRule/ J1939DcmLogicalOperator
BSW 参数 J1939DCM_OR
BSW 类型 ECUC-ENUMERATION-LITERAL-DEF
BSW 说明 DiagnosticEnvConditionFormula.op: This attribute represents the concrete operator (supported operators: and, or) of the condition formula. DiagnosticLogicalOperatorEnum.logicalOr: Logical OR
模板描述 DiagnosticExtract::Dcm::EnvironmentalCondition::DiagnosticEnvConditionFormula. op , Diagnostic Extract::Dcm::EnvironmentalCondition::DiagnosticLogicalOperatorEnum. logicalOr
M2 参数 1:1 mapping
映射规则 full
映射类型 valid
映射状态 —
ECUC 参数 ID —
属性 值
BSW 模块 J1939Dcm
BSW 上下文 J1939Dcm/J1939DcmConfigSet/J1939DcmProcessingConditions/J1939DcmModeRule
BSW 参数 J1939DcmModeRuleNrcValue
BSW 类型 ECUC-INTEGER-PARAM-DEF
BSW 说明 Optional parameter which defines the NRC to be sent in case the mode rule condition is not valid.
模板描述 This attribute represents the concrete NRC value that shall be returned if the condition fails.
M2 参数 DiagnosticExtract::Dcm::EnvironmentalCondition::DiagnosticEnvConditionFormula. nrcValue
映射规则 1:1 mapping
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_J1939Dcm_- 00056]

G.7. KeyM

属性 值
BSW 模块 KeyM
BSW 上下文 KeyM/KeyMCertificateElementVerification/KeyMCertificateElementCondition/KeyMCertificate ElementConditionValue/KeyMCertificateElementConditionSenderReceiver
BSW 参数 KeyMCertificateElementConditionSenderReceiver
BSW 类型 ECUC-INSTANCE-REFERENCE-DEF
BSW 说明 This parameter references a mode in a particular mode request port of a software component that is used for the condition.
模板描述 This reference represents both the ModeDeclarationGroupPrototype and the ModeDeclaration relevant for the mode comparison.
M2 参数 DiagnosticExtract::Dcm::EnvironmentalCondition::DiagnosticEnvModeCondition. modeElement
映射规则 For DcmModeRef a new DiagnosticEnvSwcModeElement is used, pointing to the ModeDeclaration via PModeInSystemInstanceRef. This new DiagnosticEnvModeElement shall be aggregated by the same DiagnosticEnvironmentalConfition as the DiagnosticEnvModeCondition, in which the target of the reference DiagnosticEnvModeCondition.modeElement points to the this DiagnosticEnvMode Element.
映射类型 full
映射状态 valid
ECUC 参数 ID [ECUC_KeyM_00052]

H. 本文档范围内的可拆分元素

表中的每个条目由特定模型元素本身的标识和标记值 atp.Splitkey 的适用值组成。

关于可拆分模型元素的概念以及应如何处理这些元素的更多信息,请参见 [16]。

| Name of splitable element | Splitkey |

| DiagnosticAbstractParameter.dataElement | dataElement.shortName, dataElement.variation Point.shortLabel | | DiagnosticAccessPermission.authenticationEnabled | authenticationEnabled | | DiagnosticAccessPermission.diagnosticSession | diagnosticSession | | DiagnosticAccessPermission.environmentalCondition | environmentalCondition | | DiagnosticAccessPermission.securityLevel | securityLevel | | DiagnosticAging.agingCycle | agingCycle.diagnosticOperationCycle, aging Cycle.variationPoint.shortLabel | | DiagnosticContributionSet.commonProperties | commonProperties | | DiagnosticContributionSet.element | element.diagnosticCommonElement, element.variationPoint.shortLabel | | DiagnosticContributionSet.serviceTable | serviceTable.diagnosticServiceTable, service Table.variationPoint.shortLabel | | DiagnosticDataElement.swDataDefProps | swDataDefProps | | DiagnosticDataIdentifier.dataElement | dataElement.bitOffset, dataElement.ident.short Name, dataElement.variationPoint.shortLabel | | DiagnosticEcuInstanceProps.ecuInstance | ecuInstance | | DiagnosticEnableConditionGroup.enableCondition | enableCondition.diagnosticEnableCondition, enable Condition.variationPoint.shortLabel | | DiagnosticEnvDataElementCondition.swDataDefProps | swDataDefProps | | DiagnosticEvent.connectedIndicator | connectedIndicator.shortName, connected Indicator.variationPoint.shortLabel | | DiagnosticEventPortMapping.process | process | | DiagnosticExtendedDataRecord.recordElement | recordElement.bitOffset, recordElement.ident.short Name | | DiagnosticInfoType.dataElement | dataElement.bitOffset, dataElement.ident.short Name | | DiagnosticIumprDenominatorGroup.iumpr | iumpr | | DiagnosticIumprGroup.iumpr | iumpr | | DiagnosticIumprGroup.iumprGroupIdentifier | iumprGroupIdentifier.groupId, iumprGroup Identifier.variationPoint.shortLabel | | DiagnosticMemoryDestinationUserDefined.authRole | authRole | | DiagnosticMemoryIdentifier.accessPermission | accessPermission | | DiagnosticParameterIdentifier.dataElement | dataElement.bitOffset, dataElement.ident.short Name, dataElement.variationPoint.shortLabel | | DiagnosticProtocol.diagnosticConnection | diagnosticConnection.diagnosticConnection, diagnosticConnection.variationPoint.shortLabel | | DiagnosticProtocol.serviceTable | serviceTable.diagnosticServiceTable, service Table.variationPoint.shortLabel | | DiagnosticSecurityAccess.securityLevel | securityLevel |

| Name of splitable element | Splitkey |

| DiagnosticServiceInstance.accessPermission | accessPermission | | DiagnosticServiceTable.diagnosticConnection | diagnosticConnection.diagnosticConnection, diagnosticConnection.variationPoint.shortLabel | | DiagnosticServiceTable.ecuInstance | ecuInstance | | DiagnosticServiceTable.serviceInstance | serviceInstance | | DiagnosticStorageConditionGroup.storageCondition | storageCondition.diagnosticStorageCondition, storageCondition.variationPoint.shortLabel | | DiagnosticTestResult.diagnosticEvent | diagnosticEvent.diagnosticEvent, diagnostic Event.variationPoint.shortLabel | | DiagnosticTroubleCodeGroup.dtc | dtc.diagnosticTroubleCode, dtc.variationPoint.short Label | | DiagnosticTroubleCodeObd.eventReadinessGroup | eventReadinessGroup.eventObdReadinessGroup, eventReadinessGroup.variationPoint.shortLabel | | DiagnosticTroubleCodeProps.aging | aging | | DiagnosticTroubleCodeProps.diagnosticMemory | diagnosticMemory | | DiagnosticTroubleCodeProps.extendedDataRecord | extendedDataRecord.diagnosticExtendedData Record, extendedDataRecord.variationPoint.short Label | | DiagnosticTroubleCodeProps.freezeFrame | freezeFrame.diagnosticFreezeFrame, freeze Frame.variationPoint.shortLabel | | DiagnosticTroubleCodeProps.legislatedFreezeFrameContentUds Obd | legislatedFreezeFrameContentUdsObd.diagnostic DataIdentifierSet, legislatedFreezeFrameContent UdsObd.variationPoint.shortLabel | | DiagnosticTroubleCodeProps.snapshotRecordContent | snapshotRecordContent.diagnosticDataIdentifier Set, snapshotRecordContent.variationPoint.short Label | | DiagnosticTroubleCodeUds.eventReadinessGroup | eventReadinessGroup.eventObdReadinessGroup, eventReadinessGroup.variationPoint.shortLabel |

I. 本文档范围内的变体点

表中的每个条目由模型元素本身的标识和标记值 vh.latestBindingTime 的适用值组成。

关于变体点的概念以及应如何处理包含变体点的模型元素的更多信息,请参见 [16]。

| Variation Point | Latest Binding Time |

| DiagnosticAbstractDataIdentifier.id | preCompileTime | | DiagnosticAbstractParameter.dataElement | postBuild | | DiagnosticAging.agingCycle | preCompileTime | | DiagnosticAging.threshold | preCompileTime | | DiagnosticCommonProps | codeGenerationTime | | DiagnosticConnectedIndicator.healingCycleCounterThreshold | preCompileTime | | DiagnosticContributionSet.element | postBuild | | DiagnosticContributionSet.serviceTable | postBuild | | DiagnosticDataIdentifier.dataElement | postBuild | | DiagnosticDebounceAlgorithmProps.debounceBehavior | preCompileTime | | DiagnosticEnableConditionGroup.enableCondition | postBuild | | DiagnosticEvent.confirmationThreshold | preCompileTime | | DiagnosticEvent.connectedIndicator | postBuild | | DiagnosticFreezeFrame.recordNumber | preCompileTime | | DiagnosticIndicator.type | preCompileTime | | DiagnosticIumprGroup.iumprGroupIdentifier | postBuild | | DiagnosticMeasurementIdentifier.obdMid | preCompileTime | | DiagnosticParameterIdentifier.dataElement | postBuild | | DiagnosticProtocol.diagnosticConnection | postBuild | | DiagnosticProtocol.priority | preCompileTime | | DiagnosticProtocol.sendRespPendOnTransToBoot | preCompileTime | | DiagnosticProtocol.serviceTable | postBuild | | DiagnosticRoutine.id | preCompileTime | | DiagnosticServiceTable.diagnosticConnection | postBuild | | DiagnosticStorageConditionGroup.storageCondition | postBuild | | DiagnosticTestIdentifier.id | preCompileTime | | DiagnosticTestIdentifier.uasId | preCompileTime | | DiagnosticTestResult.diagnosticEvent | preCompileTime | | DiagnosticTestResult.updateKind | preCompileTime | | DiagnosticTroubleCodeGroup.dtc | postBuild | | DiagnosticTroubleCodeGroup.groupNumber | preCompileTime | | DiagnosticTroubleCodeObd.considerPtoStatus | preCompileTime | | DiagnosticTroubleCodeObd.eventReadinessGroup | postBuild | | DiagnosticTroubleCodeObd.obdDTCValue | preCompileTime | | DiagnosticTroubleCodeProps.extendedDataRecord | preCompileTime |

| Variation Point | Latest Binding Time |

| DiagnosticTroubleCodeProps.freezeFrame | preCompileTime | | DiagnosticTroubleCodeProps.legislatedFreezeFrameContentUdsObd | preCompileTime | | DiagnosticTroubleCodeProps.priority | preCompileTime | | DiagnosticTroubleCodeProps.snapshotRecordContent | preCompileTime | | DiagnosticTroubleCodeUds.considerPtoStatus | preCompileTime | | DiagnosticTroubleCodeUds.eventReadinessGroup | postBuild | | DiagnosticTroubleCodeUds.functionalUnit | preCompileTime | | DiagnosticTroubleCodeUds.obdDtcValue3Byte | preCompileTime | | DiagnosticTroubleCodeUds.severity | preCompileTime | | DiagnosticTroubleCodeUds.udsDtcValue | preCompileTime | | DiagnosticTroubleCodeUds.wwhObdDtcClass | preCompileTime |